Warranty in a non dimp system

Hi,
Please help me with this
how can we activate warranty in a non dimp system?
Regards
Rohit

LO-WTY(warranty) is the part of ERP 2005 onnwards and if you want to use Warranty
Management System you have to activate EA-ISE.[ transaction SFW1,switch
framework ] if we activated the same,whole LO-WTY should be available
there.
All standard customizing is delivered under Transaction OWTY
please check if the entries are available in client '000'
If they are available under '000' then the LO-WTY is installed

Similar Messages

Error during Upgradation SCM 5.0 to SCM 5.1 Non-Unicode System

Hi,
I am Upgrading SCM 5.0 Non-Unicode System to SCM 5.1 Non-unicode on Windows 2003 Server with MSS 2005 DB. During the initial PREPARE (EXTRACTKRN_PRE) phase I am getting an error like
init
2010/06/15 07:03:45 PREPARE: START OF PHASE EXTRACTKRN_PRE
ERROR: Cannot find file 'C:\SCM_2007_Upgrade_Media\51033508_8\NW_7.0_SR3_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_X86_64_AUPG
KERNEL.TOC'
SEVERE ERROR(S) OCCURRED IN EXTRACTKRN_PRE !!!
The file name it is looking for does not exist in any of the Kernel versions I have checked. If I try to skip this step it is asking for the PASSWORD. How can I get this password? (only from SAP Support or any note?).
What is the Solution for the above ERROR. Please help.
Thanks,
Ajay.

> I am not posting the question in the same group. I am posting in different groups due the confusion of in which group to post > > and of course to get faster response. All people cant check all the groups to answer. Moreover I am not keeping the questions > open. As soon as I get the answer I am proving the answer in every group and immediately closing the question.
> So what is the problem with that? I do not think this is creating any inconvenience to any one, just increasing the number of questions in the group.
This is not wanted as written in the "Rules of engagement". This is a public forum, not a "help desk".
> OK, As you said If I post only in a single group do you guarantee that you will check every time all the groups to answer my question/ find my question?
Again, this is a forum where the question are answered on a volunteered basis. "Demanding" help is not the way to go, you can ask for help but there's no guarantee that you'll get an answer. If you urgently need help use the official support channels or get yourself a consultant on-site who can answer all your question instantly.
> And please paste the URL of those rules that this is wrong. Since I didnt read that.
It's the first entry in every forum, it contains the "Rules of Engagement" which say:
Please do not Cross post.
Post your question in the most appropriate forum; not multiple forums. This is bad netiquette and will might only aggravate potential repliers.
Just imagine if everyone like you would paste questions in several forums.
Markus
Edited by: Markus Doehr on Jun 15, 2010 5:29 PM
Edited by: Markus Doehr on Jun 15, 2010 5:30 PM

How to implement SSO to non-SAP systems using SAP logon ticket?

Hello,
We would like to implement Single Sign On between our SAP Netweaver system and a Siebel which is a non-SAP system using SAP logon tickets.
Can anyone please give me some leads on this, in particular:
1. Is there a JAVA API or an SAP plug-in that can be implemented on the Siebel machine to extract the SAP logon ticket?
2. As the other machine might seat on a complete different domain, is it possible to implement SAP logon ticket without using cookies (perhaps through the HTTP header?
3. In case you think using SAP logon tickets is not the best solution here I would be happy to hear any other suggestions you might have.
Roy

Hi,
I'm currently using SAML as well. Unfortunately the SAP J2EE cannot work as authority (identity provider) but what you can do is using an open implementation of SAML such as opensso which is an open version of SUNs Java System access manager.
There are a couple of other projects such as opensaml, apache's wss4j or shibboleth that might be interesting in this context.
I just installed opensso and got it working with SAP J2EE 7.0 using SAPs JAAS SAMLLoginModule to authenticate users within SAP J2EE.
In this scenario opensso serves as identity provider just as you need! There are a couple of Policy agents available on SUNs Download site you can use with Apache, Tomcat, JBOSS, WebSphere, Bea Web Logic etc. in order to authenticate! Otherwise you just directly authenticate against opensso. When installing opensso you can configure the type of user store you want to use! By default it uses LDAP but you can also use different types of user store using JDBC or other mechanisms. Since you have a Directory Service you could easily connect it to your existing directory.
There is also a way to map user ids directly in opensso by adding a uid mapping class. I created some documentation with lots of screenshots about using opensso with SAP J2EE. You can easily use opensso with any other system that supports SAML. In the case of SAP the usage is currently limited to SAML versions 1.0 and 1.1. Version 2.0 is not yet supported but should be in one of the following versions.
Here are some links you might want to check:
OpenSAML: https://spaces.internet2.edu/display/OpenSAML/Home
wss4j: http://ws.apache.org/wss4j/
shibboleth: http://shibboleth.internet2.edu/
opensso: https://opensso.dev.java.net/
On SDN you will find a documentation on how to connect SUN Java System Access Manager to SAP J2EE (see https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/906d9fc6-31b9-2910-1385-90edad7d7570). As I said opensso is based on the SUN Access Manager code and looks quite the same. So you can adapt this documentation in order to configure opensso or you can just ask me for the documentation.
Hope this is helpful...
Let me know if you need further assistance on this topic
Cheers

Sso to non sap systems

HI,
I am trying to setup SSO from our portal to plumtree portal. could some one please let me the steps for setting up the SSO.
Thanks

Hi Yogi,
Please check this link.
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/12/9f244183bb8639e10000000a1550b0/content.htm">Single Sign-On to Non-SAP Systems and Applications</a>
Regards,
Siva
P.S: Award points if you find this useful.

Using ale u can send from sap to sap and sap to non sap systems

hi,
using ale u can send from sap to sap and sap to non sap systems,
then what is diff b/w ALE and EDI

Hello KALYAN KUMAR,
Application Link Enabling (ALE)
1.You distribute data using ALE if you want to communicate from one system to one or more other (mostly internal) systems.
2.ALE transfers data in IDoc format and uses the methods of tRFC for data transfer.
3.ALE enables the integration of business processes across several SAP or non-SAP systems.
Electronic Data Interchange (EDI)
1.You use EDI if you want to exchange business application documents with an (external) partner system (for example, a customer or vendor).
2. The SAP system sends EDI messages in IDoc format to an EDI subsystem, where they are converted to a universal EDI standard (UN/EDIFACT or ANSI/X12).
3. This enables communication with non-SAP systems.
By definition, two partners are involved in the process in an EDI application scenario: The sender and the recipient of an EDI message
I hope u understands the difference:)

Uploading data from non sap system to sap system

hi to all experts,
my requirement is to upload data into the sap system from non sap system . the data is in a flat file ,but the problem is that in the flat file all the field lengths and fields are not in order or same as sap system. How to upload the data into sap system ....

hi,
the data is in a flat file,but the problem is that in the flat file all the field lengths and fields are not in order or same as sap system.
If the data is in excel sheet use this FM.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
    EXPORTING
      FILENAME                      = P_FILE
      I_BEGIN_COL                   = 1
      I_BEGIN_ROW                   = 1
      I_END_COL                     = 17
      I_END_ROW                     = 3000
    TABLES
      INTERN                        = itab
EXCEPTIONS
INCONSISTENT_PARAMETERS       = 1
UPLOAD_OLE                    = 2
OTHERS                        = 3
It will read the data from excel sheet column wise and then store it in ITAB. you can change the order after reading the file.
In case of Text file use FM GUI_UPLOAD.
You can change the order of the fileds after reading it from file, but the length and all you have to make compatible to SAP standard fields.
Regards,
Sachin

External requirement from non SAP system created in SRM 7.0 Extended Classi

Hello SRM Gurus:
Has anyone created an external requirement using XI ExternalRequirement_Create_In (http://sap.com/xi/EBP). We are getting a E001 "No company code could be determined for backend for product##". I traced the error to FM 'BAPI_SCEC_CREATE' in class "CL_BBPX_EXTERNAL_REQUIREMENT". What I found is that it check the attributes for BUK and updates a table with the backend EEC system. Then it checks if any of the entries match our external non SAP system in our external requirement and since it is a non SAP system none do. Then it sets a return error code.
I configured our non SAP system in the SLD and in SPRO under "Define System Landscape" as a non SAP system.
We are running external classic scenario. We just want to created a shopping cart from an external non SAP system. Source the shopping cart in SRM and create the PO in SRM/ECC. We are not using a product master but creating "describe requirement" in our external system. Our product categories are replicated from ECC and the same codes used in our external non SAP planning system.
If I change the external planning system to the ECC backend system, the external requirement is created in SRM but when I source it and convert it to a PO, it returns a backend error that the external requirement number does not exist in ECC. Therefore it appears all of our data from our external system is correct with the exception of how to deternine the backend company code
According to SAP this should be possible using XI.
Has anyone been successful doing this or can you please advise any OSS notes or documentation explaining how to do this. Please advise if you need additikonal info.
Thanks in advance.
Bert

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

Interface b/w SAP and NON SAP system

Hi GEMS,
Please give me some suggestion .My requirement is i have to transfer data from sap system to non sap system.
There is no middleware between these systems.The data will be in the xml format.
Please help me regarding these how can we link these systems and transfer data
Best Regards,
Phani

Please let us us know the platform of the non-sap system such as JAVA/.Net. It's can be done using PI/XI.
As per my experience, I've worked with only SAP JCO and .NET connectors. These connectors can be downloaded from service marketplace and needs to be installed on the non SAP platform. The Data transfer can be done through RFCs, which will be called from the non-sap systems.
Also, the data needs to be in XML format. XML transformations can be created using transaction XSLT_TOOL to convert the ABAP data to XML and viceversa. The generated XML string can be passed to non SAP system through RFC from SAP.
If the process is not synchronous, another option can be dumping the SAP data to FTP, which will be used by the non-sap system whenever required.

Connect b/w SAP and Non SAP -system

Hi All,
I have a requirement where i need to connect between a SAP system and Non-Sap System.
the front end is an E-Build tool (for construction Industry) from where the user will pick the data and the data should get store at the backend i.e in the SAP system.
E-build is a tool for construction industry with lots of flexible options for the user to check for their house, along with their prices.
These all data needs to be captured and store at the backend.
Can any one suggest me which method shall i go for this in ABAP(and How) or need to go for the XI-Netweaver or EP technology.
Thanks & Regards
Mona

you better to go for middleware tools . keep files( whichs contains data to be stored in SAP) in one folder at 3p systems and middleware adapters will pick that filles automatically and sent it to Application server or then process the data into SAP.
tks.. venkat

Unable to Open unix file in UNICODE system which created NON-UNICODE system

Unable to Open unix file in UNICODE system which created in NON-UNICODE system
We have two SAP systems both are ECC6.0 but System 1 is NON-Unicode and System2 is Unicode system.
There is a common unix directory/folder for both system.
Our requirement is to create one file on unix common folder and write the data to file from system1 .
In system2 open the same file for appending mode to write the data .
The file in system 1 created with below sentence.
OPEN DATASET g_unix_file FOR OUTPUT IN TEXT MODE ENCODING UTF-8.
Now I have to append the data from system 2 to same file.
I have tried to used below statement in system 2 to open the file but sy-subrc value comes as '8'.
1> OPEN DATASET g_unix_file FOR APPENDING IN TEXT MODE ENCODING UTF-8.
2>OPEN DATASET g_unix_file FOR APPENDING IN legacy TEXT MODE CODE PAGE
cdp IGNORING CONVERSION ERRORS .
3>OPEN DATASET g_unix_file FOR APPENDING IN TEXT MODE ENCODING Default.
4>OPEN DATASET g_unix_file FOR APPENDING IN TEXT MODE ENCODING NON-UNICODE.
Tried out all the possibilities as per F1 help given for open dataset , but still there is problem with opn file in appending as well output mode.However the file successfully open in Input mode(Read).
Please advice suggestion to resolve this issue.
Thanks.

Messgae captured as 'Permission Denied". The program gets triggered with system user Id PPID.
How to check the security access of the User ID.

Is there a way to activate the whole application in Non Development system?

Hi All,
Is there a way to activate the whole application in Non Development system? Using some BRF Plus Tool.
We copied a sample application and customized the same as per our requirement. The same is then released to Test System for testing. On Test system this application with all component is in non-active state. We re activated the application with all the component and released it to Test System. But still the application is inactive.
Application is a of storage type system and so cannot use changeability exit to activate on test system.
TR log shows imported with error. Below is the extract of the error:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
BRF+: Runtime client: 000 / target client: 400
BRF+: Object activation of new version started for 418 object IDs
BRF+: <<< *** BEGIN: Content from Application Component CA *** >>>
BRF+: <<< BEGIN: Messages for IDs (53465BA36D8651B0E1008000AC11420B/ ) Table 'Dunning Proposal Line Items (Table)' >>>
No active version found for 23.04.2014 08:14:10 with timestamp
No active version found for IT_FKKMAVS with timestamp 23.04.2014 08:14:10
No active version found for IT_FKKMAVS with timestamp 23.04.2014 08:14:11
BRF+: <<< END : Messages for IDs (53465BA36D8651B0E1008000AC11420B/ ) Table 'Dunning Proposal Line Items (Table)' >>>
BRF+: <<< *** END : Content from Application Component CA *** >>>
BRF+: Object activation failed (step: Activate )
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
BRF+: Import queue update with RC 12
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Errors occurred during post-handling FDT_AFTER_IMPORT for FDT0001 T
FDT_AFTER_IMPORT belongs to package SFDT_TRANSPORT
The errors affect the following components:
   BC-SRV-BR (BRFplus - ABAP-Based Business Rules)
Post-import method FDT_AFTER_IMPORT completed for FDT0001 T, date and time: 20140423011412
Post-import methods of change/transport request DE1K901989 completed
     Start of subsequent processing ... 20140423011359
     End of subsequent processing... 20140423011412
Any help would be appreciated.

Is IT_FKKMAVS part of the same transport request or was it sent already earlier?
You may have a look at the request if it was OK. Probably not.
Maybe in the meantime more requests reached the system that now have in combination solved the problem. What is your release and support package level?
Higher versions of BRFplus have a lot of automatic correction mechanisms built into it.
E.g. problematic imports are collected in an import queue. As soon as a request comes in that fixes any problems the after import processing for faulty imports is automatically redone.

How to extract data from ODS to non-SAP system

Hi,
Can anybody tell me, step by step, how to extract data from ODS to a non-SAP system?
Is it possible to do it without programming effort? And is there volume limits for this kind of extraction?
The non-SAP system is an unix system.
Thanks in advance
Ella

Ella,
You can look at it from the concept of a BADI / Infospoke
Extract the data from the ODS to a Flat file / RDBMS using an infospoke. I am not sure as to how the infospoke loads data into the RDBMS ( did it very long ago ) but then you can push it into an RDBMS and I am sure it will be system neutral.
Hope this helps...
Arun
Assign points if it helps

Is there any way to get the server app other that through the app store. We do not have our system conneted to a network. I typical downloaded items on a non-apple system.

is there any way to get the server app other than through the app store. The system that I need it on are not connected to the internet.
We run a closed-loop network of apple systems and I tipically downloaded updates on a non-apple system that was on the internet.
Any ideas?

I did buy the server app, went to the app store to download it. This system I'm using for downloads is Snow Leopard 10.6.8, it shows that I can download it but only as an Install which says I need 10.8. I can't seem to find a way for it to just download as a package or .dmg file so that I can copy it to DVD/CD or flash drive.

SAP to External Non SAP Systems C++ Connections

Hi guys,
i should develop a C++ application that should transfer/receive data from an external Non SAP System to a SAP System (MM SD FI Modules) and viceversa,
This bidirectional integration should be synchronous and asynchronous, depending on the data flow type,
I was thinking to use IDocs for this communications,
I should be able to send purchase and sell orders requests from the Non Sap System to the Sap system and receive the result of SAP processes once the SAP transactions will be finished.
So i'll have a C++ process that send idocs (created with sdk end sent throught RFC to SAP) for SD or MM operations and a SAP Abap module that receive this idocs and start internal operations.
After this i need an internal SAP abap module that send to my external application Idoc's with the result of internal operations.
Are the idocs the common way to transfer data(low cadinality) in this scenario, or there is a better way?
Note: my sap system versions are previous to the netweaver release, so i can't use a Service Oriented comunication...
Thanks in advance!!!

Hi,
try sending the data through BAPI Function Module.
and use the FM in your C++ program.
hope this works....
try
best of luck!!
thanks
ravi aswani

Creating materail in non sap system when it is create in sap

Hi,
As with the help of IDOC we can perform the activity in multiple sap server, like creation of material master if it is created in one system it can be created in other, I have one requirement , we are suing one non sap systems there we are performaing some activity with the RFC, now if any material is created in the sap system can we create the same in the non sap with IDOC. same time when it is being created in the sap.
regards,
zafar

HI,
You can use MATMAS03 or MATMAS05 idoc for transfering the material data to an externam system.
You should define this in outbound partner profile in WE20 trx.
Here you maintain the the MATMA05 in out bound parameters, and select the mode as transfer idoc immediately in output mode, give the receiving port details also.
Once the material is created, then it is automatically transfered .
Regards,
velu

Warranty in a non dimp system

Similar Messages

Maybe you are looking for