Warranty Length for K7N2 Delta-ILSR

What is the mfg's warranty length on the K7N2 Delta-ILSR?
I filled out the online support form earlier today but no response as of yet, and me being the impatient rascal I am, I didn't want to wonder all weekend. I bought it October, 2003 and the floppy drive controller seems to have gone out.
Thanks!
HH

Thank you, Glenn!
Looks like mine is 2 yrs. & 4 months old. Kind of stinks that I lost 5 months on the warranty by going by the mfg. date instead of date of purchase. Its not worth the hassle & would even cost more to RMA it for the controller. Ahh, but this is IT, the "World of Workarounds". I'll live!
Thanks for your time, Glenn! 
HH

Similar Messages

  • AGP Setup For k7n2 delta ilsr

    I have a k7n2 delta ilsr mb, in display properties on desk top setting tab then advanced button then GeForce tab under adapter information is Bus and memory. To the right of Bus it reads AGP (PCI mode) shouldn't that read AGP (8X), how can I change this. Ron.

    Hi,
    No, leave it at 64 or 128.
    Go here for an explanation:
    http://www.rojakpot.com/default.aspx?location=7&var1=18
    Then - Click on:  "Free Access To the BIOS Optimization Guide" near the bottom of the page - then click on "AGP Aperture Size"
    Axel  

  • Need help with jumper settings for k7n2 delta ilsr

    I have a k7n2 delta ilsr and I'm using a AMD 2800+ barton 333 fsb. I'm not sure what the jumper settins are for this cpu. The users guide only shows 133/166 and 200, can anyone help me with the jumper settings.
    Thanks, Ron.

    Hi,
    As your processor is 333FSB - the jumper should be set to 166FSB as should the BIOS. As your RAM CPU combination runs at 2x166=333 or thereabouts.
    Basically, as a general rule, if you halve the FSB speed of your processor you'll get the setting for both BIOS and Jumper. 200FSB=100, 266FSB=133, 333FSB=166 etc. etc.
    Axel  

  • Kingston HyperX Memory for K7N2 Delta-ILSR

    Hey will my K7N2 Delta-ILSR support the Kingston HyperX serises DDR400-512MB Ram?
    Im looking to buy 2 maybe 3 of these and really want to be sure theyll work.
    http://www.ec.kingston.com/shop/partsinfo.asp?ktcpartno=KHX3200A/256&promo=hx2shp
    I checked the supported ram list for the K7N2 Delta-ILSR  and they wernt on there so i just figured it may be out of date?
    So thanx in Advance for info!
    p.s. It will support 3x 512MB right?

    Has anyone noticed how the Hyper X went from the poor-man's Corsair to being priced equal to OCZ, and usually higher then Geil, as well as usually being very close to Corsair, if not the same? I think only Mushkin beats it out now price-wise...

  • New Modded BIOS for K7N2 Delta ILSR

    MSI K7N2 Delta ILSR Modded BIOS based on Official v. 7.80 BIOS
    download here:

     Description: Access through interface which is on insecure interfaces list detected. Request aborted.
    Interface/Client IP address:
     Date: Wed, 18 May 2005 13:11:17 GMT
    Doesn't work for me 
    By the way did u put the bios to vork with 1.3 vcore like the braziliantech one that does't exist anymore ?
    EDIT: Thanks it's working now 

  • Case Recommendation for K7N2 Delta-ILSR

    Greetings,
    I'm looking for a mid size ATX case that that has the front usb etc. ports prewired as to work easily with a K7N2 Delta-ILSR mb.  By that I mean I don't have to plug each wire individually (with names that don't match) just a plug that goes on the mb.  My eyesight isn't as sharp so hooking up those one wire at a time is tediuous.  Not to mention the lack of starndards   Does anyone know if this is address on the next rev of mb's (with pcix etc).
    Thanks

    Brazos,
    I have yet to see a case that has all the USB wires together, they are all 1 pin at a time. You will find the Antec line of cases very good. (You can always use a magnifying glass to see the pins.) The pin names on the Antec cases are standardized and easy to figure out.
    If you want a good case at a cheap price, then go with the SLK3700AMB:
    If you want a good high end case, then go with the Sonata:
    If weight is an issue, then go with the Super Lanboy:
    Take Care,
    Richard

  • Temperature reading for K7N2 Delta ILSR

    I have a 2500+ Barton (333 FSB) to work with K7N2 Delta ILSR and 2x256 MB Samsung DDRAM(400 FSB).I use MBM to read my CPU temperatures.Usually 45-47 C idle and 54-58 C under full load.I overclock CPU to 400 FSB and I get LOWER TEMPERATURES!!!!!
     I use 1:1 bios setting for CPU and DRAM speeds either 333 or 400 FSB.
     How can this by possible?

    I use Speedfan which seems to follow the temp in the bios. I've heard that MBM is also accurate. As far as your temps going down on a OC that is very odd indeed.  

  • Anyone help - need I/O plate for K7N2 Delta ILSR??

    I'm based in the UK but will pay P&P worldwide........
    cheers
    D.

    Good luck!
    http://search.stores.ebay.com/ws/search/StoreItemSearch?catref=C5&fcl=3&from=R7&frpp=50&fsoo=1&fsop=1&sacat=-1&satitle=k7n2+delta+ilsr&sbrexp=WD1S&sif=1&sofindtype=0&sofp=4&ssPageName=WD1S
    Edit: If applicable:
    http://www.mycableshop.com/sku/ATXBACKPLATE.htm

  • Warranty info for K7N2 Delta Series Motherboards

    I havent been able to find out weather my motherboard is still under warranty or not. i have checked the web site and found nothing, and i found nothing in the forums either. i dont know what infor you need to figure this out. but here is all the stuff on the sticker on my box:
    P/N:6570-020
    S/N:K0310079827
    K7N2 Delta-L (601-6570-020)
    K7, nFORCE2 Ultra400/SPP, MCP2, FSB400, D-Bracket2, Round cable
    Thats all the info i have right now at my finger tips. if you need more il can find it.
    Thank you for your help in this matter.
    BTW: All i want to know is IF i can send my motherboard to MSI and get it replaced. and  if i can, how would i go about doing it?

    Quote
    I havent been able to find out weather my motherboard is still under warranty or not. i have checked the web site and found nothing, and i found nothing in the forums either. i dont know what infor you need to figure this out....
    I boutght it the USA. I hope it is still under warranty....i hate to ask, but i cant figure out where the rma page is. can someone help me out please?
    Oh, BTW, i looked around for some contact info for MSI, but all i could find was a link to their web site.....From INSIDE the site itself!!!!  The page listed all kinds of other companies, and thire addresses and phone numbers, but not MSI's. Anyone have any helpfull tips or hints?
    Not to worry.  I think I can be of some assistance here.
    You might want to print these directions out because its a little confusing and you won't have to switch back and forth between windows to follow all the complicated steps:
    1. Go to MSI USA Website
    2. On navigation bar, click where it says "Customer Service/RMA"
    3. See all the information you need right in front of you!

  • Linux for K7N2 Delta-ILSR

    Hello,
    Does anyone know of with Linux distro is compatible with the K7N2 Delta Series?
    Sincerely, Deft

    Knoppix worked too, even my TvTuner worked.
    Not that I would recommend Knoppix as a solution, I was just playing.
    There is a lot more support for the nvidia kit now.

  • Replacement Chipset/Heatsink Fan (northbridge? for k7n2 delta-ilsr)

       < i need a replacement heatsink and fan for this fan.  that will fit!          Reason: I want a new one that is quiter, and the original fan in it broke.  I also need to be able to buy these part(s) online.

    Me too. You can get them in copper or aluminium. I have the latter, and for more than year now it's been doing a fine job with minimum noise.
    Check it out here:
    http://www.pcabusers.com/reviews/iceberg/p1.html

  • Best agp card for k7n2 delta ilsr

    Hi again folks
    I'm thinking of upgrading my graphics card as although this card has never let me down its the oldest component in my box, I would like to get something in the sub £100 range, I dont do games but may wish to in future, mainly it would be for photo apps/running-backup-watching dvd's etc. any info would be greatly appreciated tia Hazzo

    I notice your talking in £'s so I assume your located in the UK. 
    Have a look around overclockers.co.uk
    For a sub £100 I noticed a good offer:
    HIS ATI Radeon 9800 Pro - £82
    Also, the 6600GT here is only £103.24 (£106 inc delivery), altough only 4 left in stock so buy now if you want one 

  • Dont find any connection for PFC on K7N2 Delta ILSR

    Hi !
    Just bought a MSI Motherboard K7N2 Delta ILSR
    Looking for the connector pin for my PFC  ( Power fan Control)
    I can only find two fanconnectors on the board
    CPU and System
    SORRY if this question has been asked before
    searched the Forum but did not find anything

    I just installed this same board. I only found 2 also, so I suppose that is all there is.  If you are trying to set the system up so you can monitor the power supply temps and fan, here is what I did.
    The chipset fan is a 12V fan, so unplug it from the motherboard and power it by using an adapter so you can run it off one of the Molex leads.  I do not know if they make these because I fabricated the wiring myself.  You will not be able to monitor the chipset temps though.
    To fab the connector, I just used the wiring from an old system fan and soldered two small pins (about  one-quarter of an inch long), covered each lead with heat shrink and plugged them in via a standard Molex connector.  Make sure that you do not leave any of the pin exposed, ie: (the heat shrink should push up to the plastic of the chipset fan connector)..  I finished it by covering the new connector with heat shrink to make sure it didnot come apart.
    Now you can use the northbridge fan control for the pfc.  This has worked good for me, and was $30 cheaper than a fan controller unit

  • Best Cooler For XP 3000+ on K7N2-Delta ILSR?

    As the title suggests I am looking for a good, high performance Heatsink and Fan for my current XP 3000+ system. I have a K7N2 Delta ILSR mobo. Three Heatsinks I have been looking at are:
    Thermaltake Volcano 12 Extreme
    Thermalright SLK-900A with a Vantec Tornado 92mm fan
    Thermaltake SilentTower - (I think this one requires holes in the Mobo which the K7N2 Delta ILSR doesn't have :( Please correct me if I am wrong).
    I am looking for a high-performance heatsink at an affordable price (max £50) with which I can do some overclocking. Currently I have one of the Zalman ones ( I think it is a CNPS6000-CU) which is insufficient (load temps 66 C).  Help would be much appreciated. Thanks in advance.

    Yeah, i'm looking for a good price vs performance vs noise solution really. Both the Volcano and the Vantec Tornado are really loud, but they seem to perform quite well.

  • MSI K7N2 Delta ILSR (MS 6570) trouble With ATA card

    Hi, i have major trubble.
    Ihave two 300gb, two 120gb and two 80gb harddrives + 1 DVD burner and 1 CD burner with ultra DMA 100 PCI card and it works fine without using the sata or ide3 raid function. I purchased an new PCI ATA 133 card and the system won't boot. I have tried for an long time to get the raid function to work but wihtout results with my old ATA 100 card (it works when i unplugg the ide cable from ide3).
    Is there anybody that knows with type off PCI ATA 133 card that works or how too coop whith this problem.
    I've got the latest bios ver. 7.8 but no difference
    AMD XP2800+
    Kingston 2x512mb
    ATI Saphire Radeon 9600pro 256mb
    Soundblaster Live Value
    XP pro sp2
    MSI K7N2 Delta ILSR (MS 6570)

    I went to JME-Data and purchased an
    True430
    ATX 430 Watt Power Supply with PFC
    For AMD™ and Intel® systems including
    Pentium® 4
    Dedicated output circuitry
    Voltage feedback
    Antec Low NoiseTechnology
    AQ3 - Antec 3 year parts & labor warranty
    True430 is a 430 Watt 6-output, dual fan-cooled ATX12V (Baby AT or PS/2 Size) power supply designed for personal computer or industrial applications.
    Its ATX12V compliance allows its use with the latest Pentium 4 processors while its backward compatibility ensures its usability with any ATX-based AMD™or Intel® system
    The prise 1099:-
    And everything works great, Thank you very much for the tip. :-)
    No more blue screen and it even works with my memory Kingston Value Ram 2x512 ddr400.
    Is it possible to change the FSB from 166 to 200, and what should i think about before action. Like i said before i have an xp2800+
    Alltså är det möjligt att få cpu gå på samma frekvens som minnena om man ökar FSB har några tip så är jag tacksam.
    Att en nätdel kan göra så mycket helt otroligt TUSEN TACK för hjälpen till och med cpu tempen har sänkts från ca 56 till 46 grader fattar ingenting.

Maybe you are looking for

  • Oracle.xml.parser.v2.SAXParser error

    I'm reposting this error that I recently received one more time before removing the XML transforms from my Java projects and doing them in .NET. Code that was working fine suddenly getting a transform error using JDeveloper. Get the following: javax.

  • Using Type 1 fonts in Java 1.5

    I'm trying to use the Font.createFont() method to instantiate a Type 1 font. The second parameter to the createFont() method asks for a filename...but what kind of Type 1 file is needed? I've tried .pfa, .pfb, and .pfm files, and Java doesn't recogni

  • Custom Rules upload in 5.3

    Hello, I have a proof of concept project for GRC 5.3 implementation and  have configured the GRC RAR as per the config Guide and the Rule upload was done accordingly. In the configrued system, I am seeing the GLOBAL Rule set and all the rules generat

  • Editing/creating a custom dictionary

    I have some custom dictionaries in my Apple Dictionary application. I'm looking for a way to edit them (change font colors, line spaces, etc.), but I don't fin any program that can edit dictionaries or let me even create one myself. Any ideas?

  • AE replaced footage doesn't pre-render properly

    Currently I'm working on a project that has various visual effects which I've composited in After Effects. I've done this, after editing the project in Premiere CS5.5, by selecting "Replace footage with After Effects composition" in the context-menu