Warranty link for EU?
Sorry, I haven't found any advice regarding the direct rma procedure for mainbard for Who live in Europe.
I've an E350DM bought on amazon and, off course, still under warranty wich dead after a correctly completed bios update through M-Flash. It doesn't show nothing on screen and doesn't play any beep.
Obliviously i have tried the recovery procedure found on this forum and also an overnight cmos clear.
I think M-Flash corrupt my board, anyway Amazon doesn't replace the card so i prefer ship directly to msi for the replacement, nobody have an email address for ask about the procedure or a link?
Thank in advance!
Quote from: flobelix in How to contact MSI on 10-August-12, 21:36:58
Europe (including UK/Ireland)
RMA for MSI-systems (i.e. notebooks, netbooks, All-In-Ones, nettops, Wind-PCs, full systems) - http://jkarma.msi.com.tw/Customer_Service/
If your country is not listed above you'll find the contact details at the bottom of this page - http://www.msi.com/service/warranty-nb/
Components, such as for mainboards, VGA cards and multimedia peripheral devices should be returned to the place of purchase. There is no direct RMA to MSI available. The reseller will request RMA.
Similar Messages
-
Warranty extension for Satellite U400
Hello!
I have a question about possibility to extend warranty for my laptop.
On the official web-ste there is information about my device and it;s written over there:
"Standard Warranty
Coverage: International Days:365 Expiration Date: 2010-05-25
Extended Warranty
Servicename: International Warranty Extension from 1 to 2 years Service Coverage: International Days: 730 Expiration Date: 2011-05-25 "
It's written that I have already an extended warranty, but i've just register the standard warranty of my new laptop!
Anyway, the question is: can i buy a warranty extansion in my cause and what type of extension i have to buy (from 2 to 4, from 2 to 3 e.t.c.)
Thank you in advance!
P.S. And one more question: my friend is going to buy Toshiba Satellite A500-1F2. The same question: which kind of warranty extension is he able to purchase?
Thank you!
Best regards,
DmitryHi
Usually all notebooks are covered by standard warranty for a 1 year.
If you register the notebook on the Toshiba page, you will get an additional warranty year (altogether 2 years).
I think this is what you can see on the Toshiba page.
I think you can extend the warranty too.
You have to look here:
http://eu.computers.toshiba-europe.com -> Peripherals & Services -> Services -> Warranty extensions
There you will have to check available Warranty Extensions for your notebook model.
Greets -
Remove link for uploaded files in application
Hi all,
I've been following the tutorial on how to upload and download files in application at http://download-uk.oracle.com/docs/cd/B32472_01/doc/appdev.300/b32469/up_dn_files.htm. I have now created my own table which stores the uploaded files and can download them successfully. I would now like to add the ability to delete these files within the application and was wondering what the best way of doing this was?
I would like to add another column to the displayed report with a 'Remove file' link for each listed file, which when clicked would delete the file from the table. I've already tried using a similar method to the one used to upload the files (instead of uploading the file, the called procedure deletes it from the table using the specified ID), but this causes the application to display a blank page when the link is clicked, which I dont want (but does delete the file).
I would appreciate any suggestions.
Regards,
DaveDave,
See the login page:
http://htmldb.oracle.com/pls/otn/f?p=31517:101
There are details on how to access the application builder, where you can see how the
setup of that download, delete, upload application has been done.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://htmldb.oracle.com/pls/otn/f?p=31517:1
------------------------------------------------------------------- -
Is it possible to display the document link for each record in Report ?
Hi,
Is it possible to display the document or Image link for each master record in the Report with the help of RSA1->Document->Master Data.
Usefull answers are really helpfull.
Advance Thanks for the userful answers.
Regards,
MRC.Hi JAYASHREE PARASMAL ,
Thanks for your valuable answers.
Now i got the document in my Report,while executing the report through query designer as per your suggestion done on Setting Tab option.
But i can't able to get the same thing,while i executing the Repory through WAD.
What setting i need follow in the WAD for getting the same thing.
Kindly give your suggestion to get the document in my Report,while i am executing through my WAD.
Once again thanks for your helpful answer and awaiting for your suggestion.
Regards,
MRC. -
How to create link for pdf file in discoverer worksheet
Hi All,
I would like to create a link for pdf file into discoverer report (worksheet).
So that i can open linked pdf file using worksheet link.
Can any one tell me about this?
Thanks
RaviHi,
I think the best way to do this is to use a database directory so that you can access your pdf file as a bfile. Then create a mod_plsql procedure that sets the mime type and downloads the pdf file. You then create a calculation in the EUL then returns the URL to your mod_plsql procedure. You can then include this calculation as a hyperlink in your worksheet.
It is not as difficult as it sounds. Please let me know if you need anymore details.
Rod West -
Scheduled Discoverer report link for viewer in portal
Hi,
When a link for scheduled report for plus users is created in portal Oracle suggestes the following. This is good since it does not need the run number and the same link will work for all reruns.
http://<host.domain>:<port>/discoverer/plus?cn=cf_a156&opendbid=SALES_ANALYSIS2&sheetid=42&workbooksource=Scheduled
whereas for opening a scheduled workbook result in viewer the link needs the run number which prevents using the same link for every run.
Do anyone found a way to workaround this
Thanks for the help
JayHi Jay
I can see that you've had this posted for a little while so I thought I would at least let you know that I've read it. I'm afraid the answer is not what you hoped though as I don't know of a way off the top of my head to do what you ask.
Sorry, regards
Michael -
Problem description:
My MacBook Pro is running really slow. Applications won’t open or take up to 10 min.
EtreCheck version: 2.1.5 (108)
Report generated December 27, 2014 at 9:15:58 PM CST
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (13-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.4 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: one day 6:55:8
Disk Information: ℹ️
TOSHIBA MK5065GSXF disk0 : (500.11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HD (disk1) / [Startup]: 498.88 GB (5.04 GB free) (Low!)
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[loaded] com.epson.driver.EPSONProjectorUDAudio (1.30 - SDK 10.4) [Support]
[not loaded] com.seagate.driver.PowSecDriverCore (5.2.6 - SDK 10.4) [Support]
/System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.6 - SDK 10.4) [Support]
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.6 - SDK 10.5) [Support]
[not loaded] com.seagate.driver.SeagateDriveIcons (5.2.6 - SDK 10.4) [Support]
Problem System Launch Agents: ℹ️
[killed] com.apple.CallHistoryPluginHelper.plist
[killed] com.apple.coreservices.appleid.authentication.plist
[killed] com.apple.icloud.fmfd.plist
[killed] com.apple.telephonyutilities.callservicesd.plist
4 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.ctkd.plist
[killed] com.apple.icloud.findmydeviced.plist
[killed] com.apple.ifdreader.plist
[killed] com.apple.nehelper.plist
[killed] com.apple.wdhelper.plist
[running] com.seagate.TBDecorator.plist [Support]
5 processes killed due to memory pressure
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[loaded] com.carbonite.launchd.carbonitealerts.plist [Support]
[running] com.carbonite.launchd.carbonitestatus.plist [Support]
[loaded] com.coupons.coupond.plist [Support]
[loaded] com.hp.help.tocgenerator.plist [Support]
[loaded] com.trendmicro.itis.dca.plist [Support]
[running] com.trendmicro.itis.uimgmt.agent.plist [Support]
Launch Daemons: ℹ️
[failed] com.adobe.fpsaud.plist [Support]
[running] com.carbonite.launchd.carbonitedaemon.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[running] com.trendmicro.icore.av.plist [Support]
[running] com.trendmicro.icore.main.plist [Support]
[running] com.trendmicro.icore.wp.plist [Support]
[running] com.trendmicro.itis.plugin.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[invalid?] com.jdibackup.JustCloud.autostart.plist [Support]
[invalid?] com.jdibackup.JustCloud.backupstart.plist [Support]
[loaded] com.trendmicro.itis.uninstaller.plist [Support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
bomgar-scc-20130819-104735 UNKNOWN (missing value)
bomgar-scc-20130905-143949 UNKNOWN (missing value)
USB Display Agent Application (/Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app)
WDDriveUtilityHelper Application (/Applications/WD Drive Utilities.app/Contents/Resources/WDDriveUtilityHelper.app)
WDSecurityHelper Application (/Applications/WD Security.app/Contents/Resources/WDSecurityHelper.app)
USB Display Agent Application (/Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app)
bomgar-scc-20130819-104735 UNKNOWN (missing value)
bomgar-scc-20130905-143949 UNKNOWN (missing value)
HP Scheduler Application (/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app)
HP Product Research Application (/Library/Application Support/Hewlett-Packard/Customer Participation/HP Product Research.app)
Internet Plug-ins: ℹ️
SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Support]
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 [Support]
CouponPrinter-FireFox_v2: Version: 5.0.5 - SDK 10.6 [Support]
Flash Player: Version: 15.0.0.223 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 600 - SDK 10.10
User internet Plug-ins: ℹ️
npBcsMcTcIO: Version: Unknown [Support]
Safari Extensions: ℹ️
Trend Micro Toolbar [Installed]
3rd Party Preference Panes: ℹ️
Carbonite [Support]
Flash Player [Support]
Paragon NTFS for Mac ® OS X [Support]
Seagate Dashboard for Mac OSX [Support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
HD: Disk size: 498.88 GB Disk used: 493.84 GB
Destinations:
Jens Seagate Backup [Local]
Total size: 999.86 GB
Total number of backups: 6
Oldest backup: 2014-06-24 10:33:56 +0000
Last backup: 2014-12-17 17:14:18 +0000
Size of backup disk: Too small
Backup size 999.86 GB < (Disk used 493.84 GB X 3)
My Passport for Mac [Local]
Total size: 2.00 TB
Total number of backups: 14
Oldest backup: 2013-08-21 19:19:35 +0000
Last backup: 2014-12-19 11:44:23 +0000
Size of backup disk: Excellent
Backup size 2.00 TB > (Disk size 498.88 GB X 3)
Top Processes by CPU: ℹ️
6% coreaudiod
5% CarboniteDaemon
4% iMovie
3% JustCloud
3% Wondershare Player
Top Processes by Memory: ℹ️
335 MB iPhoto Library Manager
180 MB Finder
142 MB iMovie
70 MB Preview
51 MB Microsoft Word
Virtual Memory Information: ℹ️
149 MB Free RAM
1.04 GB Active RAM
897 MB Inactive RAM
1.17 GB Wired RAM
30.53 GB Page-ins
1.42 GB Page-outs
Diagnostics Information: ℹ️
Dec 26, 2014, 05:17:12 PM /Library/Logs/DiagnosticReports/iPhoto_2014-12-26-171712_[redacted].cpu_resourc e.diag [Details]
Dec 26, 2014, 03:47:17 PM /Library/Logs/DiagnosticReports/CarboniteDaemon_2014-12-26-154717_[redacted].cp u_resource.diag [Details]
Dec 26, 2014, 02:22:01 PM Self test - passed
Dec 26, 2014, 11:48:03 AM /Library/Logs/DiagnosticReports/CarboniteDaemon_2014-12-26-114803_[redacted].cp u_resource.diag [Details]You have nearly run out of disk space. Either purchase a larger one or start cleaning out the one you have?
-
How do i find the link for my adobe revel photo gallery
How do i find the link for my adobe reveal gallery?
Have you tried to sign in with your Adobe ID at https://www.adoberevel.com/ ?
If you need more help, please ask in the Revel forum. -
Creating a Database link for a user
Hello All,
I am trying to create a database link for one of my users.
When I create it as sysdba the link gets created in the SYS schema which tells me that my syntax is working/fine.
But when I ALTER my SESSION and set my CURRENT_SCHEMA = <USER_NAME> I get ORA-00990: missing or invalid privilege
So I tried granting the user CREATE DATABASE LINK, CREATE PUBLIC DATABASE LINK, and DROP PUBLIC DATABASE LINK.
Same error.
Any ideas what I am missing?
Thanks,
CraigCraigBoyd wrote:
Hello All,
I am trying to create a database link for one of my users.
When I create it as sysdba the link gets created in the SYS schema which tells me that my syntax is working/fine.
But when I ALTER my SESSION and set my CURRENT_SCHEMA = <USER_NAME> I get ORA-00990: missing or invalid privilege
So I tried granting the user CREATE DATABASE LINK, CREATE PUBLIC DATABASE LINK, and DROP PUBLIC DATABASE LINK.
Same error.
Any ideas what I am missing?
Thanks,
Craigyou need to create a new session after the GRANT was issued. -
I cannot make any more iTunes or Apps purchases because I cannot remember my security questions. I have read online that you cannot update rescue email address (mine is no longer valid) until you answer the security questions. I have clicked on the link for support on account management but it never opens. I am very upset because all I am needing to do is make purchases. Any ideas or numbers or actual links you can post in response is appreciated.
Click here and find the phone number for your country.
(78231) -
How to find out the link for the tables for sub contract PO
Dear All,
How to find out the link for the tables for sub contract PO, I am looking for the fields Material, Unit, Batch no., quantity.
Please provide the solution for the Table related to ABAP.
Thanks,
V.V.Hi,
Make use of the table EKKO, EKPO...
For subcontract please select the option in EKPO-PSTYP.
Regards
GK. -
In desperate need of a link for CS5
I currently have Photoshop CS5 on my laptop, but have just purchased a desktop where i need this program as well. I recently moved and have not been able to locate the original CD since then.
I have asked Adobe about this, but they say that they can't provide me a link for an older version of Photoshop. I was wondering if anyone would be kind enough to provide a link for the application for me.
I would be forever grateful! Thanks! HeatherAs long as you have your seral number you can use the cs5 downloads from here:
http://prodesigntools.com/all-adobe-cs5-direct-download-links.html
Just be sure to follow the Note:Very Important Instructions or the download links won't work. -
Issue in confirmation links for personal data ESS application (CA)
Hi All,
We have implemented EXIT button configuration for ESS applications and the Exit button along with 'Go to Home page' link is navigating to custom created page in portal.
The configuration done earlier for ESS applications like Address Update, Family Member/Dependents works fine.
We got a new service added (Personal data) & tried configuring the Exit button for this application also.
Some how the exit button doesnt seem working for Canada besides it working for US.
Please help in figuring out if there is any cause of the Exit button not working for personal data application for molga 07 specially. Adding to it, the links for confirmation screen are also not working for the same application
Appreciate your help.
ThanksHi,
As per your Req.....
Its seems to be the Services exits that are county specific Services .........mease the Molga ( country Code ) is set for this services is "US"
That Y its working fine .....
But as per your REq you want this Services working for the Molga 07 ...
I thikn for this you need to set the Molga 07 in the contry specific home pages......
Then it will work fine -
Creation of new object link for DMS
i have searched a lot about Creation of new object link for DMS on internet .
and all replies focus on that documentation :
1. Program two screens for the following module pools for the SAP object that is to be linked additionally:
u2013 SAPLCV00
u2013 SAPLCVIN
The process logic must be according to that of screen 0204 in program SAPLCV00 and must not be changed.
2. Create the function module OBJECT_CHECK_XXXX (XXXX = name of the SAP object).
i need to know how to implement that in more detailed step by step
as i know DMS and abap also.Hi Reda,
Hope the below URL will help to understand how the Process of adding a object link works.
Enhancement Without Modification of the Object Links - Engineering Change Management (LO-ECH) - SAP Library
Thanks & Regards,
Seshadri. -
Need links for creation varaibles using different processing types....
Hi All,
can you provide me links for creation of variables using diiferent processing types...
it would be grateful if you peovide any links which covers all most all the topics in bi reporting....
Thanks All.Hi,
Pl refer to following link as well
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0b25093-b548-2e10-0cba-fcac7890585f?QuickLink=index&overridelayout=true
Customer exit for text variables
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d343131313235%7d
http://help.sap.com/saphelp_nw04/helpdata/en/61/579b3c494d8e15e10000000a114084/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d313535373530%7d
Thanks and regards
Kiran
Maybe you are looking for
-
The question about application priority in OCAP
First question: I know the AIT includes priority for each application. But I find nothing about priority description in XAIT, may be I made a mistake about XAIT's structure. Second question: OCAP(10.2.2.5) define the priority range from 1 to 255. Whe
-
Downloading zipped files error?
This may be a little silly, however, I'm trying to download the suport docs from https://websmp201.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000713358&_SCENARIO=01100035870000000202 - however, whne I try the zipped files, I get the following error.
-
Problems with sorting in cross tab.
Hi, Can anybody help me? I use Oracle Discoverer Desktop 10.1.2 The problem is: a have a cross tab in which at the left axis I have the items sorted by alternative sort. Among them there are two items with similar names, like "detail 1" and "detail 1
-
I have just brought airport extreme and am unable to get connected to wifi
I have just brought Airport Extreme. The amber light keeps flashing, despite plugging it into the modem....what is wrong?
-
Logic pro 8 won´t accept my serial after migration to macintel
I bought and installed the update from logic 7 to 8. No problems. But after migration to a mac pro logic asks me for my serial and won´t accept it. What can i do - i have proof that i bought the program but can´t use it...someone said its because of