WAS 5.02 vs WAS 5.1
Hi,
WAS 5.1 shipped with enhanced features when compared to WAS 5.02. In my project, they are planning to have WAS5.02 as dev environment and WAS5.1 as production env. In that event, what could be the problems and what are the advantages we lose by using lower version. I need to esclate in detail.
Regards
sundar
If you dont get a response here, you might try posting on a websphere forum on the ibm site.
Often a minor update x.1 vs x.0.1 will include bug fixes and new features whereas an x.0.1 would be nothing but bug fixes.
This varies though vendor to vendor
Similar Messages
-
Firefox will not open. If I click the icon I get a less than oe second flash of Firefox on the bar and then its quickly changes to Finder.
I have tried many different User names/Passwords that I no longer know which one is used. Please I have spent hours just trying to get connected to Firefox and cannot do it. I need to open Firefox for some documents for my job or I will lose the job. I wrote
all of this to you last night and was told than I was connected. Today I connected the old proxy and think that I have cleared that up. Should I drop the old Icon in trash, throw it away and start with either 3.6 or beta. I really need some help and will
of necessity being going out shortly. What shall I do? HelpNobody can help you without proper system and version information or other technical details. if the update is botched, then run the cleaner tool and reinstall from scratch.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Mylenium -
Open project was canceled or RoboHelp was unable to load database
I have Robohelp 2002r2 and am creating Robohelp HTML help.
The project was ok yesterday but today when I try to open it I get
the error message "Open project was canceled or RoboHelp was unable
to load database". I tried the solutions in the knowledgebase
(rb_3245) but still no luck. I can't even create a new project
either or I get the same message. Anybody know what to
do????Welcome to the forum.
The message is usually easily dealt with. I haven't checked
the article as you didn't include a link but I'm guessing it
involved deleting a couple of files and then using the HHP file to
open the project.
What is more worrying is that you cannot create a new
project.
Have you tried opening one of the supplied sample files?
Are your projects stored locally and not on a network?
Have IT given you a new profile to log on with?
Has anything else changed in your environment? -
Project Error: Open project was canceled or RoboHelp was unable to load database
Hi,
I checked an HTMLHelp project out of SourceOff Site (SOS),
then attempted to open it locally with RoboHelp 5 when I got the
error message: "Open project was cancelled or RoboHelp was unable
to load database."
I found the TechNote for this error message (rb_3245) which
said to delete the .xpj and .cpd files, then right-click the HHP
file and click Edit to open the project. This worked fine for
opening the project, however the Primary Layout Source defaulted to
WebHelp. I reset the Primary Layout Source to HTMLHelp which caused
all of the graphics in the project to not display. I fixed this
issue, compiled the Help, and all appeared to be fixed. I checked
the project back into SOS to back it up. This morning, I checked it
out of SOS and tried to open the project locally again, only to get
the same error. I closed the project, undid the check-out, and
asked another writer to check-out the project then open it locally
to see if he got the same error. He did not get the error.
I am not sure what could be wrong on my computer that is
causing this error. I had no problems opening and using this
project until yesterday and I made no file name or path changes to
the project. Any ideas on what may be wrong?Welcome to the forum.
The message is usually easily dealt with. I haven't checked
the article as you didn't include a link but I'm guessing it
involved deleting a couple of files and then using the HHP file to
open the project.
What is more worrying is that you cannot create a new
project.
Have you tried opening one of the supplied sample files?
Are your projects stored locally and not on a network?
Have IT given you a new profile to log on with?
Has anything else changed in your environment? -
Open project was cancelled or application was unable to load database for pathname
My pc is installed with Robohelp 3x. Recently I shifted the
pc from one room to anther. Now when I attempt to open my existing
workable solution, it give me the following message: "Open project
was canceled or application was unable to load database for
<pathname>". Do I need to call for Robohelp technical
support? If yes, can someone provide me the toll free number?
Can someone pls advise?Thanks Peter, managed to get in through the link you've
given. I seriously doubt it has anything gotta do with a corrupted
project. I have 2 working projects last week but they can no longer
be opened this week.
I tried even to created an empty project from scratch. It was
created successfully but when I reopen the project, it shows the
same error message.
Could there have been other possibilities or ways which I can
troubleshoot?
*puzzled* -
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that
the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)
The system cannot find the file specified
Cannot connect to COWBOYS.
Here are the technical details===================================
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
Error Number: 2
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
The system cannot find the file specified
I have tried from so many forms. This is so frustrating. Thank for everyone/anyone who wants to help. So this is what happened: I had to uninstall my previous sqlserver 2012(which worked great) for some reason, and I uninstalled everything from that download.
Then I installed the trial edition of sql server 2012 (64 Bit) and It wouldn't connect to the database. (Error mentioned above.) My local DB is COWBOYS. (COWBOYS is also my computer name.) After this, I have tried downloading sqlexpress and sqlserver 64bit
many times and cannot connect to my local DB.
How do I connect to my Local DB?
Also, I think this might help: (When I run sqlserve.exe, which I was able to find in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, I get an error: Your SQL server installation is either corrupt or has been tampered with(Error getting
instance ID from name). Please uninstall then re-run setup to correct this problem.
I would happily re install it, if it wasn't my 20th time.
I don't have any remote connections, I don't use username/password, only window authentication. I work mostly on visual studio, but without able to store /retrieve data, I don't know how to survive.
May be the solution is very simple, but I am too frustrated.
Some of the things I have tried:
From a command prompt, enter one of the following commands:
net start "SQL Server Agent (MSSQLSERVER)" OR
net start "SQL Server Agent(instancename)"(for instance)
on my sql configuration, I cannot start anything because there is nothing there to start. I can post more details, if that would help. Also, some more details about the error:
Details
Product:
SQL Server
ID:
2
Source:
MSSQLServer
Version:
10.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Version:
9.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Any one that can help me, I will be greatful. Thank you so much. p.s. please ask me anything if you have any questions.It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread. -
I am so angry - there has to be a misunderstanding. my Itunes was disabled as there was a charge that I did not authorize and I cannot find the phone number for security and the dingbat girl who I'm emailing send me a link that does not work. And I am extremely frustrated. Please help. I need a phone # to contact security.
Contact Apple Support here:
ACCOUNT SECURITY CONTACT NUMBERS
Cheers,
GB -
Just a few minutes ago i tried to purchase from The Simpsons tapped out game, but there were a warning that my purchese was declined and i was asked to re-filled the payment info in order to compete my purchase. I did that but that wont work and the warning keep showing up. Whats wrong? help please.. Is there any correlation with the software update? I did check the update , there is an update for iOS 6.0.1 .
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
When I try to download the latest version of iTunes from apple.com, I get the message "Content was blocked because it was not signed by a valid security certificate."When I open iTunes and try to download the latest version there, I get the message "iTunes has an invalid signature. The download has been removed." I have also gotten an Internet Script Error stating that an error has occured in Line 0, Char O and that "Access is denied to images.apple.com/global/scripts/lib/iepngfix.htc." This problem has never occurred with earlier versions of ITunes. Anyone know how to fix this problem?
Are you downloading iTunes form an Apple website or somewhere else? If the answer is somewhere else, try downloading it from Apple. Click on iTunes in the black menu bar above and go from there.
Let us know what happens. -
Hi yesterday I was prompted to a update to itunes this I tried to do without success failing a number of times. After this I was prompted to unistall itunes and re install this now continues to fail with a message error something like Apple Mobile Devices Failed to start not enough previlieges. Please help is this a Apple issue Iv'e never had any problems before.
I had this same problem this morning. When I tried to run ITunes after the failed upgrade I got a "msvcr80.dll is missing" driver error.
Following the instructions in step 1 of this link:
http://pcsupport.about.com/od/findbyerrormessage/a/msvcr80-dll-not-found-missing -error.htm
got the latest version of ITunes up and running for me.
The only thing that didn't quite work like the instructions said was I couldn't get the Apple Mobile Device Support to uninstall. The uninstall ran and said it was successful, but it was never removed from my list of installed programs. Even w/ that, the full re-install fixed the issue. -
I had to upload itunes on a new computer and after the iphone was updated my music was not on my phone and i don't see any music on my itunes any suggestions
iTunes- How to move your music to a new computer
Syncing to a "New" Computer or replacing a "crashed" Hard Drive -
As i stated initially, everything worked great for two weeks. The first problem I noticed was not being able to open Itunes. It would seem to load, click to a blank screen, and then go back to my icon page. The problem has spread to include anything that I want to browse and purchase, such as apps. Last night I found I could not use facetime either. Also I cannot use my NPR app. It downloads but when I touch an article I would like to read, the screen goes black and then returns to my original icon page.Not knowing what anything has to do with the problem, I have noticed that there are several apps that are in the process of being updated but will NOT update: Pinball Wizard, ibooks, Where's My Water, The Daily, and Pandora Radio. I am in Morelia, Mexico. We have a good internet provider. That does not seem to be the problem. When I purchased my Ipad, I was told that it was usable internationally. Is that the problem? Any suggestions or advice? All will be appreciated. Thanks!
As i stated initially, everything worked great for two weeks. The first problem I noticed was not being able to open Itunes. It would seem to load, click to a blank screen, and then go back to my icon page. The problem has spread to include anything that I want to browse and purchase, such as apps. Last night I found I could not use facetime either. Also I cannot use my NPR app. It downloads but when I touch an article I would like to read, the screen goes black and then returns to my original icon page.Not knowing what anything has to do with the problem, I have noticed that there are several apps that are in the process of being updated but will NOT update: Pinball Wizard, ibooks, Where's My Water, The Daily, and Pandora Radio. I am in Morelia, Mexico. We have a good internet provider. That does not seem to be the problem. When I purchased my Ipad, I was told that it was usable internationally. Is that the problem? Any suggestions or advice? All will be appreciated. Thanks!
-
I tried to purchase music at iTunes with the iTunes card I was given. I was able to redeem the amount and it shows on my apple Id I have $25 but it does not pay my purchase it will still go to my credit card and bill it. It did not give an option.
If you were instructed to call them, then that's what you should do. They will probably need to verify your identity before helping you with the security question.
-
i have an apple id that i can't get into because i have forgotten the password and the email that i had it connect to is no longer working because i no longer know the password so i was wondering if there was a way i could send my apple id and password to an new email account thart i now have
Go to https://getsupport.apple.com
(If you see a message that says 'There are no products registered to this Apple ID, simply click on 'See all products and services')
Choose 'More Products & Services', then 'Apple ID'.
A new page will open.
Choose 'Other Apple ID Topics', then 'Lost or forgotten Apple ID password'.
Click the blue 'Continue' button.
Select the contact option that suits your needs best. -
Hi Everyone..
I am getting an Error 1046: Type was not found or was not a compile-time constant: Component Event.
The ComponentEvent class has been imported,and also the event handling code is there. I am not sure what else is wrong, hope somebody can advise me. Thanks. The code is below, the point where the error occurs as indicated by the compiler has been highlighted.
package
import flash.display.Sprite;
import flash.media.Camera;
import flash.media.Microphone;
import flash.media.Video;
import fl.controls.TextArea;
import fl.controls.Button;
import fl.controls.TextInput;
import flash.events.SyncEvent;
import flash.events.MouseEvent;
import flash.events.FocusEvent;
import flash.net.SharedObject;
import flash.net.NetConnection;
import flash.net.NetStream;
import flash.events.NetStatusEvent;
import flash.events.FocusEvent;
import flash.events.ComponentEvent;
public class VideoChat extends Sprite
private var button:Button;
private var text_so:SharedObject;
private var textArea:TextArea;
private var textInput:TextInput;
private var chatName:TextInput;
private var nc:NetConnection;
private var nsOut:NetStream;
private var nsIn:NetStream;
private var rtmpNow:String;
private var msg:Boolean;
private var cam:Camera;
private var mic:Microphone;
private var vid:Video;
public function VideoChat ()
//Set up UI
textArea = new TextArea();
textArea.setSize(500,280);
textArea.move(20,54);
addChild(textArea);
textInput = new TextInput();
textInput.setSize(500,24);
textInput.move(20,340);
textInput.addEventListener(ComponentEvent.ENTER,checkKey);
addChild(textInput);
button = new Button();
button.width=50;
button.label="Send";
button.move(20,370);
button.addEventListener(MouseEvent.CLICK, sendMsg);
addChild(button);
chatName = new TextInput;
chatName.setSize (100,24);
chatName.move (80,370);
chatName.text="<Enter Name>";
chatName.addEventListener (FocusEvent.FOCUS_IN, cleanName);
addChild(chatName);
//Connect
rtmpNow="rtmp:/VideoChat ";
nc=new NetConnection;
nc.connect (rtmpNow);
nc.addEventListener(NetStatusEvent.NET_STATUS,doSO);
cam = Camera.getCamera();
mic=Microphone.getMicrophone();
//Camera Settings
cam.setKeyFrameInterval(15);
cam.setMode (240, 180, 15, false);
cam.setMotionLevel(35,3000);
cam.setQuality(40000 / 8,0);
//Microphone Settings
mic.gain = 85;
mic.rate=11;
mic.setSilenceLevel (25,1000);
mic.setUseEchoSuppression (true);
//Video Setup
vid=new Video(cam.width, cam.height);
addChild (vid);
vid.x=10, vid.y=20;
//Attach local video and camera
vid.attachCamera(cam);
private function doSO(e:NetStatusEvent):void
good=e.info.code == "NetConnection.Connect.Success";
if(good)
//Set up shared object
text_so=SharedObject.getRemote("test", nc.uri, false);
text_so.connect (nc);
text_so.addEventListener(SyncEvent.SYNC, checkSO);
private function checkSO(e:SyncEvent):void
for (var chung:uint; change<e.changeList.length; chng++)
switch(e.chageList[chng].code)
case "clear":
break;
case "success":
break;
case "change":
textArea.appendText (text_so.data.msg + "\n");
break;
private function cleanName(e:FocusEvent): void
chatName.text="";
private function sendMsg(e:MouseEvent):void
noName=(chatName.text=="<Enter Name>" || chatName.text=="");
if (noName)
textArea.appendText("You must enter your name \n");
else
text_so.setProperty("msg", chatName.text +": " + textInput.text);
textArea.appendText (chatName.text +": "+textInput.text +"\n");
textInput.text="";
private function checkKey (e:ComponentEvent):void
noName=(chatName.text=="<Enter Name>" || chatName.text=="");
if (noName)
textArea.appendText("You must enter your name \n");
else
text_so.setProperty("msg", chatName.text +": " + textInput.text);
textArea.appendText (chatName.text +": "+textInput.text +"\n");
textInput.text="";
//Create NetStream instances
private function checkConnect (e:NetStatusEvent):void
msg=e.info.code == "NetConnection.Connect.Success";
if(msg)
nsOut=new NetStream(nc);
nsIn=new NetStream(nc);
//NetStream
nsOut.attachAudio(mic);
nsOut.attachCamera(cam);
nsOut.publish("camstream");
nsIn.play("camstream");Hi Guys...
I have found out what is wrong. I was importing the wrong package the correct one should have been:
import fl.events.ComponentEvent;
instead of
import flash.events.ComponentEvent;
I hope this is helpful for anyone caught in a simillar situation as me...Thanks.. -
Creating project as Disc Image after 1 1/2 hours it appeared to be finished but there was message that there was a multiplex error. Checked and no yellow triangles, music on computer, and all resources on computer, any ideas??
Hi
And
• free space on Start-Up hard disk ? How Much ?
• Brand and type of DVD used
• Burn Speed ?
• Did You try to first do a "Save as a DiskImage" ? If so - Did it work ?
Yours Bengt W
Maybe you are looking for
-
40ft x 10ft banner in photoshop..need some advice before printing
With this banner's size 40ft x 10ft (480in x 120in), is 62 PPI good enough to maintain the quality when printing? I'm afraid it will be blurry. This banner will be viewed about 20ft away or more... please need answer asap!! tq
-
API call to update_bank_acct_uses errors
Hi When the api - hz_cust_acct_info_pub.update_bank_acct_uses is called I get the following error: status E message This record in table AP_BANK_ACCOUNT_USES cannot be locked as it has been updated by another user. I ensured that I am not using the c
-
Iphoto Library disappeared after upgrade
I have upgraded my iMac to Yosemite and have been using iPhoto fine since then (although it is a bit slow), yesterday iPhoto crashed the computer, after several restarts the computer was ok, but iPhoto wouldn't load and then said it needed to be upg
-
SC status stuck in I1111 Item in Transfer Process
Hi Friends We're using SRM 7.0 SP03. I got a question about SC status update, let me describe it with an example: 1) firstly, i found a SC became Error in Process due to some data problem; 2) then, i reprocessed it in Application Monitor by click the
-
Margin errors in HTML e-mail test
In a previous post, I had asked for help viewing HTML mail campaign pieces and got the suggestion to try Email on Acid. I did and this was a scream to watch. The results for Outlook (every issue) was less than stellar. However, Gmail reveled the wors