WAS 6.10 and DB7.3 Installation error
Hello all.
I am new to SAP, and recently obtained the tes drive 6.012 for linux.
So far i have installed everything, thanks to the help of posts here.
I know am totally stumped.
I try to install sapbasis-6.10-1.noarch.rpm the usual way, but each time database creation fails.
I opened the log and it succesfully loads data disk 1 2 and three.
The problem is when it goes to
load_systab -u SUPERDBA,ADMIN -ud DOMAIN
here we have an err -24964 followed by Some sql error has occured
The process then conitnues for a bit, band seems to complete with an error.
When i go to start sap, it complains about the db.
Any thoughts?
Thank-you
Hello René,
I think you should download the latest SAP GUI for JAVA at: ftp://ftp.sap.com/pub/sapgui/java/630r4/PlatinGUI-Linux-630r4.jar
Regards
Gregor
Similar Messages
-
I bought mountain lion, made a bootable flash drive.
I booted from it and it went to upgrading right away!
So I stopped it and went to my former recovery partition I erased my HD because I wanted a clean start.
Now I can't instal mountain lion from the bootable flash drive, and keep getting "installation error. Try again."
and there is no 4 choices window.
I don't know what to do.How did you create the USB install thumb drive? If it was with Disk Utility I have run into this problem and have since used THIS program to make the USB install drive.
As to your problem you only have one option and that is to Reinstall the Original OS X version that came on your computer or if you still have the Lion Recovery Partition use that to reinstall Lion. Or if you system came with Lion and you have No Lion Recovery HD Partition you can boot the system from over the internet and Reinstall Lion.
At startup hold down the Command+Option+r keys until you saa a spinning Globe in the center of the screen. Once that loads Repartition the drive as One partition and then reinstall Lion. -
DAC Services and Informatica PowerCenter installation error
Hello!
I'm trying to install subj from files
V30860-01_1of2.zip
V30860-01_2of2.zip
which contains archive
dac_win_101341_infa_aix_64bit_910.zip
It is an Oracle Business Intelligence Data Warehouse Administration Console 10.1.3.4.1 for Microsoft Windows and Informatica PowerCenter and PowerConnect Adapters 9.1 for AIX Based Systems (64-bit)
on IBM AIX 6.1 64 bit.
And I have an error after running OUI:
pts/2 biappl@biappl:>./runInstaller
Platform is AIX
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 80 MB. Actual 3490 MB Passed
Checking swap space: must be greater than 150 MB. Actual 2560 MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-11-20_02-51-17PM. Please wait ...The Java RunTime Environment was not found at /tmp/OraInstall2012-11-20_02-51-17PM/jdk/jre/bin/java. Hence, the Oracle Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again.
I wonder, why OUI try to use it's own JRE from
/tmp/OraInstall2012-11-20_02-51-17PM/jdk/jre/bin/
directory?
There are only Windows binaries (including java.exe and there is no ./java file)!
Is anyone can say me what exactly am I doing wrong?
I have and env variable
pts/2 biappl@biappl:>echo $JAVA_HOME
/usr/java6_64/
I also tried to run runInstaller with ./runInstaller -jreLoc=/usr/java6_64/jre options, but this workaround does not have any effect.
p.s. Maybe this DAC install source is for windows only, so where I can get this one for AIX 6.1 64 bit?
Thanks a lot for any help!
Edited by: 969999 on 20.11.2012 6:02Hi,
Looks like its an identified Bug 8613903 with 64bit systems.
Check this doc : ID 849658.1
Regards,
Jay
Edited by: Voltaire on Nov 20, 2012 10:31 AM
Edited by: Voltaire on Nov 20, 2012 10:32 AM
Edited by: Voltaire on Nov 20, 2012 10:33 AM -
I tried to update my IPhone 4 last night thru ITunes and got and error when almose done 9006. It says in the nes that you have to do it thru wifi but do not have wifi and so I synced it with my computer and said I have the new update down now and selected yes and it startedto do it then stopped 3 times with error 9006? Do I have to restore the phone to do this new up date? Here is the link I saw on yahoo. Upgrade to IOS 7.1
http://news.yahoo.com/ios-7-1-upgrade-iphone-210049155.htmlConfigure your security software
Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.
Common errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
Resolve specific iTunes update and restore errors - Support - Apple -
ODTwithODAC10202.exe and ODAC10202.exe Installation Error
OS: Windows 2000 Advanced Server(zh_cn)
Steps:
cd install
setup.exe
Oracle Universal Installer Welcome Screen
Next
Select [Oracle Data Access Components 10.2.0.2.20]
Next
Use Default Name & Dir Path
Next
Oralce Universal Installer CRASH, without any info.
but, The Installation of ODT10104.exe & ODAC101040.exe is OK.
What shall I do? Waiting your help, thanks.Thanks for your reply.
My OS is 32bit windows.
1) Are you including spaces in your path to the Oracle Home? This is a known problem.
No.
2) Are you installing into a 9.2 or 10.1 oracle home,
No.
or allowing a new 10.2 oracle home to be created?
Yes.
3) Have you recently installed a JDK on your machine?
Yes, Sun JDK 1.5.0_8. But when I uninstall the jdk and try again, OUI still CRASH at the same step.
The Orcale Home,'D:\oracle\product\10.2.0\client_1', was created successfully, but nothing in it.
Here is the logs:
oraInstall2006-08-22_09-44-23AM.err 0KB
oraInstall2006-08-22_09-44-23AM.out 0KB
installActions2006-08-22_09-44-23AM.log 3KB
installActions2006-08-22_09-44-23AM.log:
Using paramFile: E:\Downloads\ODTwithODAC10202\install\oraparam.ini
Checking installer requirements...
Checking operating system version: must be 4.0, 5.0, 5.1, 5.2 or 6.0. Actual 5.0
Passed
Checking monitor: must be configured to display at least 256 colors. Actual 4294967296 Passed
All installer requirements met.
The commandline for unzip:
E:\Downloads\ODTwithODAC10202\install\unzip -qqq ../stage/Components/oracle.swd.jre/1.4.2.8.0/1/DataFiles/"*.jar" -d "C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\OraInstall2006-08-22_09-44-23AM"
The commandline for unzip:
E:\Downloads\ODTwithODAC10202\install\unzip -qqq ..\stage\Components\oracle.swd.oui\10.2.0.2.0\1\DataFiles\/"*.jar" -d "C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\OraInstall2006-08-22_09-44-23AM"
The commandline for unzip:
E:\Downloads\ODTwithODAC10202\install\unzip -qqq ..\stage\Components\oracle.swd.oui.core\10.2.0.2.0\1\DataFiles\/"*.jar" -d "C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\OraInstall2006-08-22_09-44-23AM"
The number of files bootstrapped for the jre is 584.
The number of files bootstrapped for the oui is 71.信息: 环境变量:
信息: ORACLE_HOME =
信息: PATH = D:\oracle\product\10.1.0\Client_1\bin;D:\oracle\product\10.1.0\Client_1\jre\1.4.2\bin\client;D:\oracle\product\10.1.0\Client_1\jre\1.4.2\bin;C:\WINNT\system32;C:\WINNT;C:\WINNT\system32\WBEM;C:\Program Files\IDM Computer Solutions\UltraEdit-32;c:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\80\Tools\Binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft Help 2.0 SDK
信息: CLASSPATH =
信息: 用户名:Administrator
信息: Oracle Universal Installer 版本为10.2.0.2.0
信息: 正在将变量 'PREREQ_CONFIG_LOCATION' 设置为 ''。从变量关联得到该值。
信息: Reader/Writer 'oracle.sysman.oii.oiic.OiicGlobalContextXMLReaderWriter' was created.
信息:
*** 欢迎使用 页***
信息: 正在初始化安装产品清单
信息: 正在设置安装产品清单
信息:
*** 指定源位置 页***
信息: 正在初始化 OUI 安装包访问设置
信息: 正在执行 OUI 安装包访问设置操作
信息:
*** 选择要安装的产品 页***
信息: 正在将 'TopLevelComp ( ToplevelComp )' 属性设置为 'oracle.odac, 10.2.0.2.20, >0.0.0.0.0, [ 912 ][OH:2]'。从 UI 页得到该值。
信息:
*** 选择安装类型 页***
信息: 正在将 'InstallType ( DEP_MODE )' 属性设置为 'Custom'。从默认设置得到该值。
信息: 正在将 'TopLevelInstallType ( TLDepModes )' 属性设置为 'Custom'。从默认设置得到该值。
信息: 所选安装类型是 "Custom"。
信息:
*** 指定主目录详细信息 页***
信息: 正在将 'OracleHome ( ORACLE_HOME )' 属性设置为 'D:\oracle\product\10.2.0\client_1'。从 UI 页得到该值。
信息: 正在将 'OracleHomeName ( ORACLE_HOME_NAME )' 属性设置为 'ODACHome1'。从 UI 页得到该值。
信息: 正在初始化 OUI Oracle 主目录访问设置
信息: 正在将变量 'ORACLE_HOME' 设置为 'D:\oracle\product\10.2.0\client_1'。从 UI 页得到该值。 -
I have a iphone 3gs and while trying to update tot the new software my phone gave error -1 and went to usb and itunes logo page and says it is in recovery mode. I have tried to get it out of this mode but have had no luck. My iphone is not jailbroken, so i don't know why this is happening.
The device is in recovery mode. Connect it to iTunes and the computer and you need to restore it.
-
I am trying to upgrade Itunes 10.7 so I can access apps for Iphone 4S. While installing I get an error message indicating theres is a problem with the windows installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Any idea how to resolve this issue?
Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
I was updating ITunes and I got an error message that program can't start because MSVCR80.dll is missing. what do I do?
I have the same problem and in following the Apple recommended procedures of unistalling Apple iTumes and related programs I am not able to unistall"Apple Mobile Device Support" as recommended. It is recommended that I delete all related files before installation! How do I proceed?
-
A view, function and TO_DATE causing an error.
I have the following statement which calls a view, VW_DIST_RPT_WORK_LIST which in turn calls a function which returns either 'Null' or a date string e.g. '07 Oct 2003' as a VARCHAR2 (alias PROJECTED_DELIVERY_DATE).
Statement:
SELECT CUSTOMER_NAME, PROTOCOL_REFERENCE, SHIPPING_REFERENCE, CUSTOMER_REFERENCE, COUNTRY, PROJECTED_DELIVERY_DATE, STATUS, NOTES,
TO_DATE(PROJECTED_DELIVERY_DATE)
FROM VW_DIST_RPT_WORK_LIST
WHERE EXPECTED_DESP_DT IS NOT NULL
AND UPPER(PROJECTED_DELIVERY_DATE) NOT LIKE('NULL%')
AND EXPECTED_DESP_DT <= TO_DATE('07/10/2003', 'DD/MM/YYYY')
AND TO_DATE(PROJECTED_DELIVERY_DATE) <= TO_DATE('31/12/2003', 'DD/MM/YYYY') --< Problem here
I need to be able to specify a date filter on the PROJECTED_DELIVERY_DATE field and hence used the TO_DATE(PROJECTED_DELIVERY_DATE) <= TO_DATE('31/12/2003', 'DD/MM/YYYY') but this is generating an ORA-01858: a non-numeric character was found where a numeric character was expected.
I think the problem lies with the fact that this field can contain 'Null' which cannot be converted to a date using TO_DATE. I've tried adding a NOT LIKE ('NULL%') statement to catch any nulls which may be creeping in bu this doesn't solve the problem.
I've added TO_DATE(PROJECTED_DELIVERY_DATE) to the select above to determine if the nulls are being caught and if the TO_DATE in performing the conversion correctly which it is on both counts.
Any ideas anyone ?The answer provided above by Monika will work for this situation. However, you should seriously think whether you should be using a string for date datatype. Ideally, you should rewrite the function that returns PROJECTED_DELIVERY_DATE and change the return type to DATE. The least you should do is to return NULL (instead of the string 'NULL') from the function. Oracle handles nulls perfectly, there is no reason you should write code to handle nulls;
One more thing. Looking at the type of error you are receiving, it seems that you are using rule based optimizer. Why do I think so? Because, in rule based optimizer, the conditions are evaluated in a specific order (viz, bottoms-up for AND clauses). To show this, look at the following simple demonstration. I did this in Oracle 8.1.6 (also in 9.2.0.4.0 on Windows).
-- Check the database version
select * from v$version;
BANNER
Oracle8i Enterprise Edition Release 8.1.6.1.0 - Production
PL/SQL Release 8.1.6.1.0 - Production
CORE 8.1.6.0.0 Production
TNS for Solaris: Version 8.1.6.0.0 - Production
NLSRTL Version 3.4.0.0.0 - Production
-- Create the test table
create table test (a number(2));
insert into test(a) values (0);
insert into test(a) values (1);
insert into test(a) values (2);
insert into test(a) values (3);
insert into test(a) values (4);
insert into test(a) values (5);
insert into test(a) values (6);
insert into test(a) values (7);
commit;
-- See that I have not analyzed the table. This will make use of RULE based optimizer
select * from test
where a > 0
and 1/a < .25;
and 1/a < .25
ERROR at line 3:
ORA-01476: divisor is equal to zero
-- Look at the query clause. Even though I specifically asked for records where a is positive
-- the evaluation path of rule based optimizer started at the bottom and as it evaluated the
-- first row with a=0, and caused an error.
-- Now look at the query below. I just re-arranged the conditions so that a > 0 is evaluated
-- first. As a result, the row with a=0 is ignored and the query executes without any problem.
select * from test
where 1/a < .25
and a > 0;
A
5
6
7
-- Now I analyze the table to create statistics. This will make the query use the
-- cost based optimizer (since optimizer goal is set to CHOOSE)
analyze table test compute statistics;
Table analyzed.
-- Now I issue the erring query. See it executes without any problem. This indicates that
-- the cost based optimizer was intelligent enough to evaluate the proper path instead of
-- looking only at the syntax.
select * from test
where a > 0
and 1/a < .25;
A
5
6
7
Does the above example seem familiar to your case? Even though you had the AND UPPER(PROJECTED_DELIVERY_DATE) NOT LIKE('NULL%') in your query, a record with PROJECTED_DELIVERY_DATE = 'NULL' was evaluated first and that caused the error.
Summary
1. Use dates for dates and strings for strings
2. Use cost based optimizer
Thanks
Suman -
Installation error occurred when the air is built from another machine.
The senerio is that .
AIR SDK: 2.0
I orginally built an AIR versioned 1.05 from a mac 10.0.6 with FlashBuilder 4.6 and now I used the same code based and same application.xml to build a newer version 1.06 from a windows 7 x64 FlashBuilder 4.5 then i got the following error
The application could not be installed because an application with that name already exists at the selected installation location. Try installing to a different location.
I have put publisherID into the descriptor xml.
Could somebody please helpI found out the cause.
What I do:
Copy the Flex sdk from mac to pc directly.
More info:
The reason why i didnt do the above step at the begining because there are so many hidden files are generated by mac and which let the flashbuilder in PC keep prompting error.As a result, I manually deleted all the hidden files (more than 2k files) and build release with that sdk and finally the installation error not show.
Also,I found that although both mac and pc are using Flex 4.1 sdk ,may be with different build number? The point is I will/may face the same problem if I decide to update the flex sdk from 4.1 to newers version.
This is a very big problem because there are so many ppl installed the old version and they may have to manually uninstall and install again and I will receive so many phone calls for support but which is fine if they are all hot girls.. -
I Tunes- Installation ERROR 1603 ?
I have disabled fire walls and virus protection, cleared temp files and defraged.
Have a clean install of XP and STILL get installation errors- - 1406, 1402, and the killer is 1603
Any ideas would help me retain my hair !
cheers aNDY -
Yoga Tablet 2 Lollipop Update - Google Play Services does not update - installation error
Lenovo is investigating customer reports that after upgrading Yoga Tablet 2 8 830 or 10 1050 to Android 5.0.1 Lollipop, Google Play Services does not update as expected, and shows an installation error.
A workaround has been identified while this is under investigation. It can be found here: https://forums.lenovo.com/t5/Android-Yoga-Series-Tablets/Yoga-Tablet-2-series-Android-5-Lollipop-experiences-and-problems/m-p/2105390#M8061
It would help the investigation if several customers would be willing to provide logs capturing this failure event for Yoga Tablet 2 8 or 10 1050 models.
To capture logs, please follow this procedure: http://support.lenovo.com/us/en/products/tablets/yoga-series/yoga-tablet-2-830/documents/HT103449
Once you have collected the logs, please zip the files and attach them to an email which can then be sent to [email protected] If the file is too large to send, please provide a link to the hosted file.
With the email, please include the following information:
Name:
Forums User ID:
Model:
S/N:
Discussion Link: https://forums.lenovo.com/t5/Android-Yoga-Series-Tablets/Yoga-Tablet-2-Lollipop-Update-MicroSD-Card-...
A description of the failure and any other information you would like to share:
Zipped attachment or link to hosted file:
Once I receive multiple logs, I will open a case to escalate these reports for a solution.
Thank you,To lenovo. The reason I bought this tab is that I believe it has good quality and its performance is excellent especially from lenovo. But if lenovo reasons out that they cannot override the code that is in apk itself from Google playstore. Can u provide a link or procedure how to go back from lollipop to KitKat until it is resolved? Because we cannot do the things we should do especially work related if we can't download or update any apps tnx.
-
ITunes 12.1.1 installation errors and resolution (Win 7, 64 bit)
I am providing all of the installation errors I had experienced
and all of the methods I had tried until I finally came up with a solution.
Hopefully the details will help you see if your situation has similarities
which hopefully will make this post helpful in terms of a solution.
PART ONE: INSTALLATION ERRORS
I received the following installation errors
when attempting to update to 12.1.1
and later once I uninstalled and attempted to reinstall 12.1.1.
I used this link for the download:
http://www.apple.com/itunes/download/?cid=wwa-us-kwg-music-itu
> itunes 6464setup.exe
I then tried this link:
http://support.apple.com/kb/DL1614
> itunes 12.1.1 64 bit
Again 6464 in the name.
After uninstalling the iunes,
I discovered under add/remove programs:
apple application support 32 bit
and apple support update
I deleted these and restarted the PC.
I then tried reinstalling a NEW version
from the second link above.
Opened download iTunes 6464setup.exe >
Windows installer> iTunes > welcome to itunes
> next > installation options > install > user account control
> yes > next > (error message via pop-up window):
ERROR MESSAGE ONE
"An error occurred during installation of assembly Microsoft VC80 CRT Type ="win32",
version = "8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b"
processorArchitecture ="amd64".
Please refer to Help and Support
for more information.
HRESULT: 0X80070091"
> OK > iTunes > Status: Starting services >
(error message via pop-up window):
ERROR MESSAGE 2
"Service 'Apple Mobile Device Service' (Apple Mobile Device Service)
failed to start. Verify that you have sufficient permission to start system services"
SIDE NOTE
There was a USB cable connected to the PC to charge the iPhone,
but the iPhone was not connected. I detached the USB cable from the PC in case it's relevant.
(I did not reattach the USB cable until I finally got a copy of itunes to install. You will see later in this post below.).
I then clicked Retry.
ERROR MESSAGE 2 AGAIN
I received the identical 'Apple Mobile Device Service' error as above.
I then clicked Ignore.
iTunes > Status
> User Account Control pop-up window)
> Do you want to allow to install Apple iTunes>
Yes >
> Congratulations > Finish
> (iTunes pop-up error window):
> iTunes Helper
ERROR MESSAGE 3
a)
"Apple Application Support was not found.
Apple Application Support is required to run iTunes.
Please uninstall iTunes and install iTunes again.
Error 2 "
> (iTunes pop-up error window)
> iTunes
b)
"Apple Application Support was not found.
Apple Application Support is required to run iTunes.
Please uninstall iTunes and install iTunes again.
Error 2 (Windows Error 2)"
> OK > OK
ERROR MESSAGE 4
I received all of these errors above
when I had tried a fresh install before returning to the forum to search for answers.
When I had first tried a fresh install, I didn't get as far as the Congrats.
I only got as far as the first and second error listed above
("An error occurred during installation of assembly Microsoft VC80 CRT Type ="win32"...
AND Service 'Apple Mobile Device Service' (Apple Mobile Device Service").
Clicked on iTunes icon on desktop
ERROR MESSAGE 5
I receive the (iTunes pop-up error message window)
error 2 windows error 2 (identical to what's listed listed under 3b).
PART 2 - INSTALLATION RESOLUTION
The issue finally is resolved.
HERE IT IS!!!
1) Uninstall iTunes
2) check remaining Apple programs
(click control panel > programs > uninstall)
> check the listed Apple programs
Apple Application Support 32 bit,
Apple Mobile Device Support,
Apple Software Update,
Bonjour
3) Locate and save the correct file version of iTunes for your OS and System.
In my case, it's Win 7.
You must check for the System Type.
Computer > right click to properties > system type.
In my case its 64 bit.
The 32 bit installer is named iTunesSetup.exe,
while the 64 bit installer is named iTunes64Setup.exe.
I learned that some folks had experienced issues with
the 64 bit installer on the Apple site whether it's
because they had downloaded the 32 bit
when they needed the 64 and therefore
couldn't complete the install or in my case,
what appears to perhaps be a corrupted file that stated 6464 in the .exe file name.
This lead me to believe that finding the file with the correct file name and
correct file size to prove it authentic for that version would likely be part of
the solution if not the solution. File Hippo is one suggested means to locate the file.
I locate the iTunes download "iTunes64Setup.exe" that matched the size of the file
to a valid copy of that version of ITunes and I set it aside.
4) I then made sure that all old copies
and remnants of iTunes and Apple software
has been uninstalled by checking add/remove.
Then C: program files
and then C: program files (x86),
then running CC Cleaner,
then cleaning the registry using CC Cleaner
and then checking Tools under CC Cleaner.
***I discovered under Tools that there were remaining Apple files listed
after the uninstall of iTunes and other files had taken place under iTunes***
I visit tools under CC Cleaner and deleted the remaining Apple files
including Apple Application Support, Mobile Device Support, and Bonjour,
***but I leave the Apple Software Update folder as is, in tact***
under C: Program files (x86) and Tools of CC Cleaner and under Add/Remove.
5) I restart the computer, install the new copy of iTunes 12.1.1 (64 bit),
iTunes64Setup.exe, and it installed with zero errors.
Hope someone will find this useful. Good luck.Try the "for older video cards" version.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2 -
I just downloaded Itunes 11.1.4 (64-bit) update and am running Windows 7. Itunes will not run after installing this update and I receive an error message R6034 on Loading Microsoft C Runtime Library incorrectly. Also Error message 1114 the Itunes Installer was installed incorrectly. Is there an new update for this problem? Is anyone else having this problem? Please help. Thanks.
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99425) -
Photosmart printer -all-in-one 5520 and windows 8.1 - INSTALLATION ERROR
I have a photosmart printer - model: all-in-one 5520; code number HPC57CC4 and my operating system is windows 8.1.
I had problems with the scan function and so I decided to disinstal the printer (from the Control Panel) and I even cancelled the HP folders.
Then I tried to reinstal the printer with the original CD but I got the message: INSTALLATION ERROR - DRIVER PACKAGE INSTALL GIVES THE ERROR -536870329 FOR THE PACKAGE C:\Program Files\HP\HP Photosmart 5520 series\DriverStore\Pipeline\hpvpl09.inf (that's the translation from Italian)
I have tried endless times to install with the online software from the HP assistance (hppsdr.exe, hppiw.exe, ps5520_1315-1.exe, hpscan and doctor) but I always get the above error message, the system recognizes my printer, but gives the error message few seconds after starting installing it.
If i use the printer from other PCs it's ok, I've also tried both in the wireless modality and with the USB cable but the result is the same: no installation!
thanks in advance fot your help.
deniseHi @denig,
Welcome to the HP Forums!
I noticed that you are having trouble installing your HP Photosmart 5520 on Windows 8.1. I am happy to help you with this installation issue!
Please try the following solutions:
Uninstall the software. Uninstalling the Printer Software. (In case any was partially installed).
Clean boot the computer. How to perform a clean boot in Windows.
Make sure no antivirus programs are running. Turn Windows Defender on or off.
Make sure the firewall is disabled. Disabling the computer's firewall on a Windows 8 or Windows 8.1 computer.
Re-install using the HP Printer Install Wizard for Windows.
Hope this helps you resolve your issue, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!
Maybe you are looking for
-
My Macbook Pro won't let me download anything
I have a Macbook Pro with Mac OS X 10.6.8 software. When I attempt to update my computer I get this message: When I attempt to update my flash a window pops up that tells me the image data is corrupted. A similar message happens when I attempt to do
-
Error in Business Rule Creation
Hi, need help. I created a small business rule for clear. In select outline, Showing Available servers 1. planning 2. Essbase. I want to create new BR inside Planning DB. If i accesing the Planning, it throwing the error as *"Error connecting to plan
-
Get the handler for GUIBB Feeder class from Genil implementation class
Hello, In BOL based GUIBB, the feeder class will call correspondence Genil implementation class, may I know if it is possible to get the handler or instance of the feeder class in the Genil implementation class, then we can call the method of the fee
-
Hi Requested quantity field is read only in the transaction.How to make the requested quantity field input field. I need to assign extra stock to the order created regards, PradeepM.
-
I bought my boyfriend a $25 Skype gift card. He received the email but it says that the link expires in 24 hours but that it's not a problem because after 24 hours Skype will just send him a new email with a new link. However, he has not received an