Was capturing video, after 5th cut, capture mode stopped?

Can anyone help with some feedback what I can look into. I have a Dell Dimension desktop 2G RAM, 80Gig harddrive running XP, Canon Elura 100 Mini-DV, have CS3, just recently installed. Have run adobe program cleaner to clean up all old CS2 files. Have burned to DVD using this program. Have edited video and while I was currently capturing 5 consecutive cuts of DV footage the capturing mode just vanished. Now, when I click on File<Capture nothing happens. I have checked out Edit<Preferences<Device Manager< clicked online. I can even click on the camera from MY COMPUTER, and see the video camera hooked up and working.<br /><br />Any ideas?

Adjust the main window size for Premiere. The capture module may be hiding behind it.

Similar Messages

  • After updating camera video capture mode stop working

    Dear sir/madam
    Recently I updated My Sony xperia Z1 with android 4.3 version. I get problem of Camera's feature of video recording. When I start recording it has stopped after some seconds and message displaces "unknown error". And stored as a crushed file. When I try to play this crushed video messages displaces "cannot play video".
    Please give me suggestion
    What should I do to resolve this error?
    Viral Dave

    Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
    I suggest that you to run your phone in safe mode for a while to check if you still experience this. If not this may be caused by any downloaded application.
    How to boot into safe mode?
    If you don't notice any difference during safe mode I suggest that you try to reinstall the phone software using Update Service..
    Before reinstalling your device you may want to backup your information first. Check out this topic for more information on how to.
    How to backup?
    Please note that before restoring any backup test the concerned feature so its working properly.
     - Community Manager Sony Xperia Support Forum
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Can't open a video after final cut export.

    Very strange issue which getting me nuts.
    I've FCP 7 on Lion.
    I'm finishing a project and export it as it is on an external hard drive for back up.
    I've got a .MOV file.
    After that I'm making an other folder and export all the working file from FCP.
    End of the story.
    Later I want to open the Quic time video file... and then I've got an error message telling me that QT is looking for data of the video file "xyz-FIN-0000000e"
    There is only a STOP button.
    If I press it I've got a new error message telling me :
    The file "xyz-FIN-0000000e" can't be found. Without it the video can't be play correctly"
    (I'm translating the message from my french system)
    So I can find sometimes the files is asking from the other folder (the FCP back up files) and then it open it...).
    But WHY does the video file needs reference files ?
    It was an export and I ask the exporter to make a self movie...
    Realy I don't understand what's wrong.
    Any cue ?
    Thanks !
    Jean do

    But WHY does the video file needs reference files ?
    It was an export and I ask the exporter to make a self movie...
    Realy I don't understand what's wrong.
    Any cue ?
    Since you end up with MOV files, it sounds like you may be using the "Export/QuickTime Movie..." option. If you then fail to set the "Make Movie Self-Contained" option, any content not specifically transcoded/rendered during the editing process will not be copied to the target file and will instead reference the source file containing the original unaltered data. To ensure your export files are non-dependent, simply check the "Make Movie Self-Contained" box option and all data will be copied to the new file but, depending on the length of your project, may take additional time to create the target export file.

  • I was trying to make a new screen recording using quicktimeplay, but when I watched the video after recording it all I could hear was me talking while the video was showing on the screen. How do I turn off that recording and turn the right one on? thanks

    I was trying to make a new screen recording using quicktimeplay, but when I watched the video after recording it all I could hear was me talking while the video was showing on the screen. How do I turn off that recording and turn the right one on? thanks

    Hi j2399123,
    It sounds like your screen recording is doing what it was designed to do, capture what is happening on your screen, with optional voice over with the microphone.
    Screen recording is for recording what you see on the screen, it is not a "video capture" option, like for capturing a movie with sound that is playing on your screen.
    For the QuickTime recording options, check out "Recording with QuickTime Player" in
    Mac Basics: QuickTime Player creates, plays, edits, and shares video and audio files
    http://support.apple.com/kb/ht4024
    And for screen recording specifically, there's
    QuickTime Player 10.x: Record your computer’s screen
    http://support.apple.com/kb/PH5882
    Thank you for thinking of Apple Support Communities for your support needs.
    Nubz

  • No video after sleep mode.

    Brand new home built system (all new components unless noted otherwise) running Windows 7 64-bit Home Premium on the following hardware:
    MSI X58 Pro-E motherboard,
    Intel Core i7-920 (2.66) CPU,
    Enermax PRO82+ 525W powersupply,
    Sapphire ATI HD5670 1GB GDDR5 PCI-E video,
    8GB Corsair 1333MHz RAM,
    WD Velociraptor 150GB 10,000 RPM boot drive,
    WD 500GB Caviar Black for file storage,
    Plextor DVD-RW,
    CoolerMaster case.
    Older Viewsonic VP2030B monitor,
    Older Microsoft Desktop 6000 V2 keyboard/mouse.
    With standard Windows 7 power saving features enabled, the following
    intermittent problems occur:
    After the system has gone into sleep mode, the video card provides no signal to the monitor. Moving the mouse or touching keys on the keyboard obviously bring the system back out of sleep mode, but no video signal is received. Unplugging the DVI-D
    cable from the card results in the Windows sound indicating a change. Plugging it back in, results in a Windows sound indicating the change. This happens when you unplug one end of the cable, it doesn't matter if it is at the monitor end or the video card
    end - as long as the other end is of course still plugged in. The only resolution to this "no video" state is to reboot the computer with the power or reset button.
    On some occasions when turning the PC on, there is no video signal. The system boots properly (although the BIOS screen takes about 15 seconds to appear - something MSI says is OK), and can be shut down with the correct keyboard sequence. The monitor
    runs through VGA, DVI-A and DVI-D, but no signal is ever received so it goes into standby mode. 
    When the computer boots properly, usually while it is still loading Outlook (which is set to start automatically), the screen goes completely blank for 5 or more seconds, then comes back on and the monitor menu indicates that it is running at the correct
    resolution, and then the video works correctly from there on in - unless it goes to sleep.
    On some occasions, when recovering from a "no video after sleep mode" incident, everything on the screen has been moved towards the upper left side of the screen. The Outlook window which is normally quite large (80%) and centred on the screen has been reduced
    in size to about 50% and shoved into the top left corner. Also, the 4 gadgets that normally run vertically along the right side of the screen have been moved up and towards the middle of the screen, one or two of them often overlap others.
    Things I have done/tried:
    All Windows 7 updates,
    All motherboard BIOS updates,
    All video card drivers and software updates from ATI,
    Replaced the DVI-D cable,
    Uninstalled the video card and drivers, and moved the card to a different PCI-E slot,
    Replaced the video card with another Sapphire ATI HD5450 card (temporarily).
    Sapphire thinks it's a hardware problem with the original card, but since temporarily replacing it with another card, the problems continue, so I doubt that is the issue. (Plus I have to pay $25 to ship the apparently defective - under warranty card - back
    to them.)
    These problems have happened intermittently since the system was built in January 2010 and they seem to be quite random, sometimes not happening for weeks, other times happening every few days. Sometimes the system is in sleep mode for 1/2 hour and it happens,
    other times it is in sleep mode for hours and it happens (or doesn't).
    Any help would be appreciated.

    Hi again,
    OK, I finally got around to trying this. I still have to check if that actually fixed it, but I managed to get into the "Factory" OSD screen.
    I had my system running, disconnected my new monitor and plugged in the flaky old Viewsonic. I then:
    1. Depressed and held down the #2 button, then depressed and held down the Power button,
    2. Almost immediately the amber power light turned-on, the backlight turned on and the output image from the PC showed up.
    3. The On Screen Display (OSD) for all the monitor setting came up (at the bottom of the screen instead of the middle where it normally is), and underneath the Main Menu window in the OSD, along the bottom of the overall OSD window, the word "Factory" appears
    in the middle between the control button keys (#1 for exit, and #2 for enter). (It's not normally there.)
    4. Using the down arrow key on the face of the monitor, I highlighted the "Factory" menu item, pressed the #2 key and voula! there was a whole new simple white text on bright blue background window, which among all sorts of settings included "Factory Reset"
    (which is the default selection).
    5. I pressed #2 again to accept and it was done.
    All that is left is to do is some user testing to see if the monitor behaves as new.
    Additional informtion: in the top of the "Factory" menu it reads: "LOVP AU Ver.0.36"
    I took photos of everything and will post them on my Flickr account. To find them go to wwww.flickr.com, click on the search button, then on the next screen click on the People tab, enter my name and click search.
    Thanks again for the advice.
    Tom

  • Extracting Photos From Live Capture Mode

    Greetings,
    Is it possible to capture still frames live from my HD camcorder when I connect it to Final Cut Express and open Live Capture mode? I'm working on a stop motion animation and thought being able to capture photos from my camcorder and then have them directly transferred into my editing program would be useful.
    Thanks

    Have you looked at this:
    http://www.boinx.com/istopmotion/overview/
    MtD

  • How do I fix footage that was capture  in the wrong format?

    Hi there,
    I want to edit footage that was supposed to be captured in 16.9. 720 x 480(1.2121) but once imported onto premiere pro cs4  looks like this
    according to properties it was captured in 16.9. 720x480(0.9091)
    How can I convert it to the first settings? 16.9  720x480(1.2121)
    Please help.
    Thanks,
    Elio

    The best way is to work in a 4:3 sequence.  On an older square TV, it'll be 16:9 with black bars on top and bottom.  On newer widescreen TVs, it'll be both letter and pillar boxed with black bars on all sides, in which case you set the TV to Zoom mode.

  • Removing pulldown without knowing how it was captured

    Is there a simple way of finding out what settings to use in Cinema Tools if you have no idea how the video was captured?
    In this case it's NTSC film-sourced footage.

    Hide the purchase in your account and there should be nothing more from it.
    http://support.apple.com/kb/HT4919

  • Audio cuts out half way through video after conversion.

    I just put together some video clips I've shot into a single video, then ran it through conversion. Half way through the completed video, the audio cuts out for the rest of the film. Yet in iMovie, it's still there. I've converted twice and it cuts out in the same spot. Could corruption in a single clip, kill the audio for the following clips? Since it takes hours to convert, I thought I'd ask before deleting the suspect clip and starting again.
    I've spliced together clips before without problem, using the same camera source.
    Thanks.
    Cheers

    I figured a work-around. From the clip where the audio cut out till the end, I dragged those clips to a new iMovie project. After converting, the sound was intact for that portion. Then I opened the complete version with audio cut-off in Quicktime Pro. Deleted the the half with audio loss. Then joined the new half I just created. Voila!
    Only when I went to post the video on my vlog, did my Internet connection die (Comcast strikes again).

  • Capture mode does not see external camera

    When I use the capture in iMovie, it only allows you to choose the built in iSight camera, and the external web cam is long listed as a choice. The external works fine in other programs (like skype).
    Is iMovie intentionally crippled to only work with iSight in capture mode? Or am I doing something wrong?
    THanks
    bob

    Thanks for your help...
    It is a Logitech Quickcam Pro 9000 using drivers from mac.
    It does show up in USB section under apple system profiler.
    It is connected through a powered hub (I have tried it directly connected with no difference).
    It is recognized fine in other programs, such as Skype (you can change from isight to external web cam).
    I downloaded and installed iGlasses 2, but that did not solve the problem. Curiously, if memory serves me correctly, photobooth only works with isight internal, but after iGlasses 2 install, it works (only) with external (when external is available).
    Any other ideas on why iMovie does not see the external web cam?
    bob

  • GoldenGate integrated capture mode (native DDL capture method)

    Hi Everyone,
    I configured Oracle GoldenGate by integrated capture mode (native DDL capture method)
      with
      Oracle DB version: 11.2.0.4
      OGG version:  12.1.2.1.0
    My proplem is the extract processes use high memory and memory not release when many ddl activity.
    Can anyone advise how to reduce memory ?
    Thanks.

    Thank you Veera
    after i config that you advice.
    For DML INSERT MANY ROW
    memory usage normal:
         254.836 MB ./dirprm/exaa.prm
    libumem:
         $  echo "::findleaks " | mdb -p 1766
    BYTES             LEAKED         VMEM_SEG CALLER
    4096                   2 fffffd7ff8df5000 MMAP
    4096                   1 fffffd7ffcf39000 MMAP
               Total       2 oversized leaks, 8192 bytes
    CACHE             LEAKED           BUFCTL CALLER
    000000000272b2e8       1 0000000004a2a0e0 __1cIggCalloc6Fi_pv_+0x3c
    0000000002724b28       1 0000000004a478c0 __1cIggCalloc6Fi_pv_+0x3c
    0000000002724b28       1 0000000004a0f380 __1cIggCalloc6Fi_pv_+0x3c
    0000000002724b28       1 0000000004b158c0 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28       1 0000000006984c40 libCrun.so.1`__1c2n6FL_pv_+0x26
    000000000272b5a8       1 0000000003c51700 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28      35 0000000007cd3ee0 libCrun.so.1`__1c2n6FL_pv_+0x26
               Total      41 buffers, 1392 bytes
    For DLL test by ADD Column
    memory Increased by number of DLL activity and memory not release until restart processes:
         264.211 MB ./dirprm/exaa.prm 
    libumem:
         $ echo "::findleaks " | mdb -p 1766
    BYTES             LEAKED         VMEM_SEG CALLER
    4096                   2 fffffd7ff8df5000 MMAP
    4096                   1 fffffd7ffcf39000 MMAP
               Total       2 oversized leaks, 8192 bytes
    CACHE             LEAKED           BUFCTL CALLER
    0000000002724b28       1 0000000004a478c0 __1cIggCalloc6Fi_pv_+0x3c
    000000000272b2e8       1 0000000004a2a0e0 __1cIggCalloc6Fi_pv_+0x3c
    0000000002724b28       1 0000000004a0f380 __1cIggCalloc6Fi_pv_+0x3c
    0000000002724b28     131 0000000007c02700 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007ccf540 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007c0f380 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007c0f000 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007be42a0 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28       1 0000000004b158c0 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007cd09a0 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007be57e0 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007ce0ee0 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007be2380 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007c000e0 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     132 0000000007cce7e0 libCrun.so.1`__1c2n6FL_pv_+0x26
    000000000272b5a8       1 0000000003c51700 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007be8d20 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     130 0000000007cce000 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007be48c0 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007be80e0 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007be5ee0 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007cec0e0 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007be5380 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     210 0000000007cd3ee0 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007bdb7e0 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007c0f9a0 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007be88c0 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007c108c0 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     132 0000000007c0e0e0 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007c0e460 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     132 0000000007cce2a0 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007bdc620 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007c0f540 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007cde540 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007c022a0 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007cec8c0 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     130 0000000007c10e00 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007bdf620 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007c0f1c0 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007bdbd20 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007ce81c0 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007c02a80 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007bf4a80 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007ce5460 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007bdcee0 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007be2700 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007ce7620 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007c02460 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007bdfee0 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007cceb60 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007ce8620 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007be20e0 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28       1 0000000006984c40 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007bf41c0 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007ccf9a0 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007ce5c40 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007c0fd20 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007c02ee0 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007ce7ee0 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007bf4700 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007ce70e0 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     132 0000000007c00460 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007cd0460 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     132 0000000007c0e2a0 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007c0f700 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007c10a80 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007be4d20 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     131 0000000007bf4c40 libCrun.so.1`__1c2n6FL_pv_+0x26
    0000000002724b28     130 0000000007cce540 libCrun.so.1`__1c2n6FL_pv_+0x26
               Total    8340 buffers, 266960 bytes

  • Recorded Videos after Sync: The requested URL was not found on this server.

    A few days ago, i recorded a couple of videos. They were saved properly and i could watch them after it in the Camera Roll of my iPhone. Because my memory was almost full, i connected my iPhone to my MacBook and synchronized about 900 old pictures with iPhoto and selected to delete the pictures after the sync. I did not select the recently recorded videos.
    After the sync, i opened the Camera Roll on my iPhone and tried to watch the videos again. But now, they all have a grey icon and it says the duration is 0:00 minutes. When i click on a video, it shows me the following error message:
    The requested URL was not found on this server.
    When i connect my iPhone to iTunes, it says that there is about 350 MB of "Documents and Data" on my phone that I have no idea where it is coming from. Do you think it is possible that the videos are still saved on my phone but my phone doesn't recognize it as videos and can't assign it to the icons in the Camera Roll? Do you have any tips how I can access the videos in case they are still saved somewhere on my iPhone?
    Thank you very much in advance for your help and tips!

    I have the same problem too!! I was deleting some photos and videos in my phone when the next picture I swiped to was a blank picture with JPG in the middle~ after I closed camera roll and reopened it my photos and videos after that picture are all gone~ and I'm left with 3 videos I took about 30 mins before with 0:00 and when I tried to play them the message popped up saying "requested URL cannot be found on this server" T^T does anyone have a solution to this problem?

  • In J1IJ we r not able to get excise invoice which was captured earlier

    Dear experts,
    while doing depot sales, In J1IJ we r not able to get excise invoice which was captured earlier through J1IG at depot.
    please suggest me what are the possible causes for the same.
    Regards,
    Balu R.V

    -Is your pricing procedure settings are maintained - Routine 356 / 365 ( need to be check) should be maintained in pricing procedure?
    Routine: 356 to be assigned in Alt Caluculation type column of pricing procedure maintainance, which will pick the Excise invoice created at the time of MIGO @ Depot. ( it will read Table:J_1IRG23D)
    Regards,
    Reazuddin MD
    Edited by: Reazuddin MD on Oct 25, 2010 11:16 AM

  • Final Cut Pro X: Can't find project I was working on after closing the program

    Recently, I was working on a video in Final Cut, and I had to close it to do something. When I re-opened it, the project I was working on was not there. I have tried looking for folders storing the project, and have found nothing. Any suggestions?

    Are you sure you were working on a project, and not editing in one clip's own timeline? This is a pretty common mistake.

  • I have the current Mac Pro the entry level with the default specification and i feel some slow performance when applying after effects on my videos using final cut pro and also rendering a video takes long time ? what upgrades do you guys suggest?

    i have the current Mac Pro the entry level with the default configuration   and i feel lack of  performance when applying after effects on my videos using final cut pro and also rendering a video takes long time ? what upgrades do you guys suggest i could do on my Mac Pro ?

    256GB SSD  it shipped with will run low and one of the things to watch.
    Default memory is 12GB  also something to think about.
    D500 and FCP-X 10.1+
    http://macperformanceguide.com/index_topics.html#MacPro2013Performance
    Five models of 2013 Mac Pro running Resolve, FCPX, After Effects, Photoshop, and Aperture

Maybe you are looking for