Was I hacked? Got this msg out of nowhere:

Was I hacked? Got this msg out of nowhere: "The system extension “//System/Library/Extensions/AppleUSBEthernetHost.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update."  I was on my home wifi, watching hulu, not plugged in to anything. I don't know what this is in reference to. Everything kept running as usual... any help would be appreciated!

No you were not hacked.
Re: AppleUSBEthernetHost.kext error on installing iTunes update

Similar Messages

  • HT201328 I got this MSG that this sim is not supported then I can't do anything. I don't have any icons on my phone and I can't restore thru iTunes.  Anyone has similar experience? What do u do? AT&T told me my phone is unlocked but I can't do anything ne

    When i got on itunes after i was told my  iphone4 is unlocked.  I got this MSG that this sim is not supported then I can't do anything. I don't have any icons on my phone and I can't restore thru iTunes.  Anyone has similar experience? What do u do? AT&T told me my phone is unlocked but I can't do anything need help. My sim is with TMobile.

    You'll need to  either a) insert your AT&T SIM card and then restore the phone, or b) force your iPhone into recovery mode.  If you re-insert the AT&T SIM card, make sure you swap it with your new T-Mobile one before you start the setup assistant.  If you force the phone into recovery mode then just leave the T-Mobile SIM card in it.
    You must restore your iPhone to complete the setup assistant so that your phone can be activated with T-Mobile.
    Unable to update or restore: http://support.apple.com/kb/HT1808

  • HT5012 i cant update my icon . msg " acount not in this store" im in Montreal canada i got this msg today

    i cant update my icon . msg " acount not in this store" im in Montreal canada i got this msg today

    Sounds like a message you'd get when trying to use an App Store outside of your registered country - ie device registered to U.K. App Store but trying to download while in the U.S.

  • An update was available but got this message: There was an error installing this update. Please quit and try again later. Error Code: U44M1I200

    What does this message mean?
    There was an error installing this update. Please quit and try again later. Error Code: U44M1I200

    try updating manually,
    pre cc updates:  http://www.adobe.com/downloads/updates/
    cc updates:  http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html

  • Went to enter my profile and got this msg 403. That's an error. We're sorry, but you do not have access to this page. That's all we know.

    lately seems ive been experiencing a high volume of technical issues from typing cursor jumping all over page to error messages like this one 403. That’s an error.
    We're sorry, but you do not have access to this page. That’s all we know. from google and all i wanted to do was enter my profile . ive found unknown users that i cant delete and seems my avast premium is worthless found two programs that i didnt download. smart pc care and advanced system optimizer and now mcaffe dose anyone know whats going on every tech support i have talked to trys to sell me 4 and 5 hundred dollar cleaan ups ??????????

    Sounds like malware, and taking advice from scamming sites. You will need to do scans with multiple and up to date tools.
    Incidentally I would not suggest you try any manual hacks or edits of the Windows registry. (Once rogue files are removed any residual registry entry will not normally do any harm.)
    If you need to find the profile you do not need Firefox open, and probably would normally not try to navigate to the profile with Firefox (although that may be done).
    * [[Profiles - Where Firefox stores your bookmarks, passwords and other user data#w_finding-your-profile-without-opening-firefox]]_finding-your-profile-without-opening-firefox
    Please post back with how you get on.
    Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
    You can try these free programs to scan for malware, which work with your existing antivirus software:
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
    * [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
    * [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
    * [http://www.bleepingcomputer.com/download/adwcleaner/ AdwCleaner: (for adware)]
    * [http://www.kaspersky.com/security-scan Kaspersky Free security scan]
    You need to use multiple and up-to-date tools as they will not all pick up the same things.
    [http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good FREE permanent antivirus for Windows 7/Vista/XP if you don't already have one.
    Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.

  • Was installing iTunes, got this warning 1909?

    I was installing iTunes yesterday, while installing this warning came up: Warning 1909: cannot verify destination folder, click ok, thought I fix it later.
    No fix, the iTune folder is void, folder nothing in it, no desktop icon, I have the exe file only. What 2 do?
    Win XPHome, sp3, Del Dim 4600, IE8.

    try updating manually,
    pre cc updates:  http://www.adobe.com/downloads/updates/
    cc updates:  http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html

  • HT1533 Anybody know what System Failure: cpu=0; code=00C39080 means? My iMac (17inch iSight) wont start and I got this msg

    Was wondering if anyone could help with the above problem...

    Doesn't sound good, but a few suggestionhere...
    http://hintsforums.macworld.com/showthread.php?t=74846

  • When I open Firefox my screen resolution changes and when I fix it on the computer it auto changes back in 10 seconds. I looked at the compatibility and nothing is checked. This started out of nowhere.

    I have used FF for about a year on my Dell Inspiron 15 and now every time I open it the resolution changes on me. If I close FF everything goes back to normal resolution. No problems with other browsers just FF. I went into the properties and tried to fix the compatibility but nothing was checked. I checked for any new updates that happened automatically but there haven't been any for days before this started. I have all my Grad school bookmarks on FF and I don't want to uninstall.

    This can be a problem with the localstore.rdf file.
    *http://kb.mozillazine.org/Corrupt_localstore.rdf
    Use Restore or Maximize in the right-click context menu of the Taskbar icon to set focus to the Firefox application if you do not see the Firefox window.<br />
    Open the system menu of that Firefox window via Alt+Space and see if you can move and resize that window.
    If that works then close Firefox (File > Exit/Quit) to save that setting.
    See also:
    * http://kb.mozillazine.org/Resizing_oversize_window

  • Just received a receipt from itunes for omething I did not purchase- was itunes hacked?

    Was itunes hacked? This morning I had a receipt from itunes for a magazine subscription I did not purchase. Anyone else have this problem?

    Is it a valid email from Apple, not a phishing attempt ? You can check the purchase history on your account via you Mac's iTunes via the Store > View Account menu option - there should be a Purchase History section with a 'see all' link to the right of it, click on that and you should then see a list of your account's purchases (the most recent purchase is above the list).
    You can check to see if you have any auto-renewing subscriptions : http://support.apple.com/kb/HT4098

  • Screen just broke out of nowhere (no cracks, inside its broke)

    So i woke up, checked my phone everything was fine,
    texted few people, checked my mail and twitter and then i went on to watch some shows on my pc (Ramsey's Kitchens Nightwares USA) to be exact
    I was watching and texting and then out of nowhere, right side of my screen just blured out and i cant **bleep** see anything on my right.  it just perfectly fine and now out of nowhere its broke?
    any help?
    got the phone in late decemeber 2013 as a gift for myself. its on contract with network provider 3 (i live in uk)
    like litterly, i was texting and then my screen just broke inside, there are no cracks
    what should i do?

    Contact your local xperia:
    http://www.sonymobile.com/global-en/support/contact-us/
    All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

  • Lots of iTunes issues cropping up out of nowhere!

    Lately when I plug my iPod in, my iTunes freezes and I have to force quit. Today that happened again, so I force quit, waited a little while, and then tried to open again. I repeatedly got a popup that said "The iTunes Library file is locked, on a locked disk, or you do not have write permission for this file." That makes no sense, because no one has access to my computer but me. Finally it opened, and I went ahead transferring some new music that I downloaded last night. About a third of it now won't play and has the exclamation mark next to it, and when I try to delete it from the iPod, I can't. When I try again to transfer it from iTunes to the iPod, it won't go. What is going on, and why has this happened out of nowhere? Help!
    I have checked for updates and I always install whenever my software manager comes up, so there is nothing I'm missing in my iTunes, as far as I can tell.

    I wanted to pull up this post, because it keeps getting worse over time. Now the bigger issue isn't the music files having the exclamation point, but the fact that iTunes freezes EVERY SINGLE TIME I PLUG MY IPOD IN. Multiple times. Repeatedly. More every time I try to plug it i, which, since I use my iPod a lot and download lots of podcasts, is quite often. At least every other week. Why does it freeze every time I try to open it with the ipod plugged in, and why does Apple not give a **** about the problem even though I have to force quit repeatedly and I always "report" the problem? Help, please!

  • Very Low Sound, occured out of nowhere.

    Out of nowhere, the sound on my computer will only go to about 1/4 of the actual maximum volume, even when everything is turned up to max in alsamixer, and on my main module.  This occured out of nowhere one day, and i can't seem to find a solution to it anywhere.  Any advice?
    Here's my dmesg and uname -a outputs:
    dmesg :
    [matt@Arch ~]$ dmesg
    Linux version 2.6.25-ARCH (root@architect) (gcc version 4.3.1 20080626 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Jul 3 20:29:23 CEST 2008
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
    BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000007de6d000 (usable)
    BIOS-e820: 000000007de6d000 - 000000007def1000 (ACPI NVS)
    BIOS-e820: 000000007def1000 - 000000007edfa000 (usable)
    BIOS-e820: 000000007edfa000 - 000000007ee07000 (reserved)
    BIOS-e820: 000000007ee07000 - 000000007eea9000 (usable)
    BIOS-e820: 000000007eea9000 - 000000007eeae000 (ACPI data)
    BIOS-e820: 000000007eeae000 - 000000007eef2000 (ACPI NVS)
    BIOS-e820: 000000007eef2000 - 000000007eef3000 (usable)
    BIOS-e820: 000000007eef3000 - 000000007eeff000 (ACPI data)
    BIOS-e820: 000000007eeff000 - 000000007ef00000 (usable)
    BIOS-e820: 000000007ef00000 - 000000007f000000 (reserved)
    BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
    1135MB HIGHMEM available.
    896MB LOWMEM available.
    Scan SMP from c0000000 for 1024 bytes.
    Scan SMP from c009fc00 for 1024 bytes.
    Scan SMP from c00f0000 for 65536 bytes.
    found SMP MP-table at [c00fe200] 000fe200
    Entering add_active_range(0, 0, 519936) 0 entries of 256 used
    Zone PFN ranges:
    DMA 0 -> 4096
    Normal 4096 -> 229376
    HighMem 229376 -> 519936
    Movable zone start PFN for each node
    early_node_map[1] active PFN ranges
    0: 0 -> 519936
    On node 0 totalpages: 519936
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 4064 pages, LIFO batch:0
    Normal zone: 1760 pages used for memmap
    Normal zone: 223520 pages, LIFO batch:31
    HighMem zone: 2270 pages used for memmap
    HighMem zone: 288290 pages, LIFO batch:31
    Movable zone: 0 pages used for memmap
    DMI 2.4 present.
    ACPI: RSDP 000FE020, 0014 (r0 INTEL )
    ACPI: RSDT 7EEFD038, 004C (r1 INTEL DP965LT 697 1000013)
    ACPI: FACP 7EEFC000, 0074 (r1 INTEL DP965LT 697 MSFT 1000013)
    ACPI: DSDT 7EEF7000, 40ED (r1 INTEL DP965LT 697 MSFT 1000013)
    ACPI: FACS 7EEAE000, 0040
    ACPI: APIC 7EEF6000, 0078 (r1 INTEL DP965LT 697 MSFT 1000013)
    ACPI: WDDT 7EEF5000, 0040 (r1 INTEL DP965LT 697 MSFT 1000013)
    ACPI: MCFG 7EEF4000, 003C (r1 INTEL DP965LT 697 MSFT 1000013)
    ACPI: ASF! 7EEF3000, 00A6 (r32 INTEL DP965LT 697 MSFT 1000013)
    ACPI: SSDT 7EEAD000, 01BC (r1 INTEL CpuPm 697 MSFT 1000013)
    ACPI: SSDT 7EEAC000, 0175 (r1 INTEL Cpu0Ist 697 MSFT 1000013)
    ACPI: SSDT 7EEAB000, 0175 (r1 INTEL Cpu1Ist 697 MSFT 1000013)
    ACPI: SSDT 7EEAA000, 0175 (r1 INTEL Cpu2Ist 697 MSFT 1000013)
    ACPI: SSDT 7EEA9000, 0175 (r1 INTEL Cpu3Ist 697 MSFT 1000013)
    ACPI: PM-Timer IO Port: 0x408
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Processor #0 6:15 APIC version 20
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    Processor #1 6:15 APIC version 20
    ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
    ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
    ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Enabling APIC mode: Flat. Using 1 I/O APICs
    Using ACPI (MADT) for SMP configuration information
    Allocating PCI resources starting at 80000000 (gap: 7f000000:80f00000)
    PM: Registered nosave memory: 000000000008f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 515874
    Kernel command line: root=/dev/sda1 ro
    mapped APIC to ffffb000 (fee00000)
    mapped IOAPIC to ffffa000 (fec00000)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 16384 bytes)
    Detected 1864.857 MHz processor.
    Console: colour VGA+ 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 2055804k/2079744k available (2083k kernel code, 21676k reserved, 711k data, 268k init, 1161320k highmem)
    virtual kernel memory layout:
    fixmap : 0xfff80000 - 0xfffff000 ( 508 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
    lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
    .init : 0xc03c1000 - 0xc0404000 ( 268 kB)
    .data : 0xc0308fe8 - 0xc03baea0 ( 711 kB)
    .text : 0xc0100000 - 0xc0308fe8 (2083 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    CPA: page pool initialized 1 of 1 pages preallocated
    SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
    Calibrating delay using timer specific routine.. 3733.20 BogoMIPS (lpj=6219526)
    Security Framework initialized
    Capability LSM initialized
    Mount-cache hash table entries: 512
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 2048K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    using mwait in idle threads.
    Compat vDSO mapped to ffffe000.
    Checking 'hlt' instruction... OK.
    ACPI: Core revision 20070126
    ACPI: Checking initramfs for custom DSDT
    CPU0: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz stepping 06
    Booting processor 1/1 ip 4000
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 3730.78 BogoMIPS (lpj=6215661)
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 2048K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 1
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#1.
    CPU1: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz stepping 06
    Total of 2 processors activated (7464.99 BogoMIPS).
    ENABLING IO-APIC IRQs
    ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
    checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    Brought up 2 CPUs
    net_namespace: 548 bytes
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved
    PCI: Not using MMCONFIG.
    PCI: Using configuration type 1
    Setting up standard PCI resources
    ACPI: EC: Look up EC in DSDT
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
    pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
    PCI: Transparent bridge - 0000:00:1e.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12)
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 12 devices
    ACPI: ACPI bus type pnp unregistered
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    ACPI: RTC can wake from S4
    system 00:01: iomem range 0xf0000000-0xf7ffffff has been reserved
    system 00:01: iomem range 0xfed13000-0xfed13fff has been reserved
    system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
    system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
    system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
    system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
    system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
    system 00:01: iomem range 0xfed45000-0xfed99fff has been reserved
    system 00:01: iomem range 0xc0000-0xdffff could not be reserved
    system 00:01: iomem range 0xe0000-0xfffff could not be reserved
    system 00:06: ioport range 0x500-0x53f has been reserved
    system 00:06: ioport range 0x400-0x47f has been reserved
    system 00:06: ioport range 0x680-0x6ff has been reserved
    PCI: Failed to allocate mem resource #6:20000@90000000 for 0000:01:00.0
    PCI: Bridge: 0000:00:01.0
    IO window: 2000-2fff
    MEM window: 0x90000000-0x92ffffff
    PREFETCH window: 0x0000000080000000-0x000000008fffffff
    PCI: Bridge: 0000:00:1c.0
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:1c.1
    IO window: 1000-1fff
    MEM window: 0x93100000-0x931fffff
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:1c.2
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:1c.3
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:1c.4
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:1e.0
    IO window: disabled.
    MEM window: 0x93000000-0x930fffff
    PREFETCH window: disabled.
    ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:01.0 to 64
    ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:1c.1 to 64
    ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1c.2 to 64
    ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
    PCI: Setting latency timer of device 0000:00:1c.3 to 64
    ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:00:1c.4 to 64
    PCI: Setting latency timer of device 0000:00:1e.0 to 64
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    Unpacking initramfs... done
    Freeing initrd memory: 545k freed
    apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    apm: disabled - APM is not SMP safe.
    highmem bounce pool size: 64 pages
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci 0000:01:00.0: Boot video device
    PCI: Setting latency timer of device 0000:00:01.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:01.0:pcie00]
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.0:pcie00]
    Allocate Port Service[0000:00:1c.0:pcie02]
    PCI: Setting latency timer of device 0000:00:1c.1 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.1:pcie00]
    Allocate Port Service[0000:00:1c.1:pcie02]
    PCI: Setting latency timer of device 0000:00:1c.2 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.2:pcie00]
    Allocate Port Service[0000:00:1c.2:pcie02]
    PCI: Setting latency timer of device 0000:00:1c.3 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.3:pcie00]
    Allocate Port Service[0000:00:1c.3:pcie02]
    PCI: Setting latency timer of device 0000:00:1c.4 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.4:pcie00]
    Allocate Port Service[0000:00:1c.4:pcie02]
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    input: Macintosh mouse button emulation as /class/input/input0
    PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    input: AT Translated Set 2 keyboard as /class/input/input1
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    registered taskstats version 1
    Freeing unused kernel memory: 268k freed
    No dock devices found.
    SCSI subsystem initialized
    libata version 3.00 loaded.
    ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 19
    PCI: Setting latency timer of device 0000:00:1f.2 to 64
    ACPI: PCI interrupt for device 0000:00:1f.2 disabled
    ACPI: PCI Interrupt 0000:00:1f.5[A] -> GSI 19 (level, low) -> IRQ 19
    PCI: Setting latency timer of device 0000:00:1f.5 to 64
    ACPI: PCI interrupt for device 0000:00:1f.5 disabled
    ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:03:00.0 to 64
    ACPI: PCI interrupt for device 0000:03:00.0 disabled
    ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:03:00.0 to 64
    scsi0 : pata_marvell
    scsi1 : pata_marvell
    ata1: PATA max UDMA/100 cmd 0x1018 ctl 0x1024 bmdma 0x1000 irq 17
    ata2: DUMMY
    BAR5:00:00 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:01 0D:00 0E:00 0F:00
    Switched to high resolution mode on CPU 1
    Switched to high resolution mode on CPU 0
    ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-H42N, RL00, max UDMA/66
    ata1.01: ATAPI: HL-DT-STDVD-ROM GDR8164B, 0L06, max UDMA/33
    ata1.00: configured for UDMA/66
    ata1.01: configured for UDMA/33
    scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H42N RL00 PQ: 0 ANSI: 5
    scsi 0:0:1:0: CD-ROM HL-DT-ST DVD-ROM GDR8164B 0L06 PQ: 0 ANSI: 5
    ata_piix 0000:00:1f.2: version 2.12
    ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 19
    ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
    PCI: Setting latency timer of device 0000:00:1f.2 to 64
    scsi2 : ata_piix
    scsi3 : ata_piix
    ata3: SATA max UDMA/133 cmd 0x3438 ctl 0x344c bmdma 0x3410 irq 19
    ata4: SATA max UDMA/133 cmd 0x3430 ctl 0x3448 bmdma 0x3418 irq 19
    ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata3.00: ATA-7: WDC WD4000KS-00MNB0, 07.02E07, max UDMA/133
    ata3.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 0/32)
    ata3.00: configured for UDMA/133
    ata4: SATA link down (SStatus 0 SControl 300)
    scsi 2:0:0:0: Direct-Access ATA WDC WD4000KS-00M 07.0 PQ: 0 ANSI: 5
    ACPI: PCI Interrupt 0000:00:1f.5[A] -> GSI 19 (level, low) -> IRQ 19
    ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
    PCI: Setting latency timer of device 0000:00:1f.5 to 64
    scsi4 : ata_piix
    scsi5 : ata_piix
    ata5: SATA max UDMA/133 cmd 0x3428 ctl 0x3444 bmdma 0x30f0 irq 19
    ata6: SATA max UDMA/133 cmd 0x3420 ctl 0x3440 bmdma 0x30f8 irq 19
    ata5: SATA link down (SStatus 0 SControl 300)
    ata6: SATA link down (SStatus 0 SControl 300)
    Driver 'sr' needs updating - please use bus_type methods
    sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 0:0:0:0: Attached scsi CD-ROM sr0
    sr1: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
    sr 0:0:1:0: Attached scsi CD-ROM sr1
    Driver 'sd' needs updating - please use bus_type methods
    sd 2:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB)
    sd 2:0:0:0: [sda] Write Protect is off
    sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 2:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB)
    sd 2:0:0:0: [sda] Write Protect is off
    sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3 sda4
    sd 2:0:0:0: [sda] Attached SCSI disk
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month
    Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
    Copyright (c) 1999-2006 Intel Corporation.
    ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
    PCI: Setting latency timer of device 0000:00:1b.0 to 64
    input: Power Button (FF) as /class/input/input2
    ACPI: Power Button (FF) [PWRF]
    input: Sleep Button (CM) as /class/input/input3
    ACPI: Sleep Button (CM) [SLPB]
    ACPI: ACPI0007:00 is registered as cooling_device0
    ACPI: Processor [CPU0] (supports 8 throttling states)
    ACPI: ACPI0007:01 is registered as cooling_device1
    ACPI: Processor [CPU1] (supports 8 throttling states)
    sr 0:0:0:0: Attached scsi generic sg0 type 5
    sr 0:0:1:0: Attached scsi generic sg1 type 5
    sd 2:0:0:0: Attached scsi generic sg2 type 0
    e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0
    e1000e: Copyright (c) 1999-2007 Intel Corporation.
    ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20
    PCI: Setting latency timer of device 0000:00:19.0 to 64
    Linux agpgart interface v0.103
    eth0: (PCI Express:2.5GB/s:Width x1) 00:19:d1:0a:4d:63
    eth0: Intel(R) PRO/1000 Network Connection
    eth0: MAC: 4, PHY: 6, PBA No: ffffff-0ff
    nvidia: module license 'NVIDIA' taints kernel.
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    USB Universal Host Controller Interface driver v3.0
    ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:1a.0 to 64
    uhci_hcd 0000:00:1a.0: UHCI Host Controller
    uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:1a.0: irq 16, io base 0x000030a0
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1a.1[b] -> GSI 21 (level, low) -> IRQ 21
    PCI: Setting latency timer of device 0000:00:1a.1 to 64
    uhci_hcd 0000:00:1a.1: UHCI Host Controller
    uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1a.1: irq 21, io base 0x00003080
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    input: PC Speaker as /class/input/input4
    ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1a.7 to 64
    ehci_hcd 0000:00:1a.7: EHCI Host Controller
    ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3
    ehci_hcd 0000:00:1a.7: debug port 1
    PCI: cache line size of 32 is not supported by device 0000:00:1a.7
    ehci_hcd 0000:00:1a.7: irq 18, io mem 0x93225400
    ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 4 ports detected
    lp: driver loaded but no devices found
    PPP generic driver version 2.4.2
    ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
    PCI: Setting latency timer of device 0000:00:1d.7 to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
    ehci_hcd 0000:00:1d.7: debug port 1
    PCI: cache line size of 32 is not supported by device 0000:00:1d.7
    ehci_hcd 0000:00:1d.7: irq 23, io mem 0x93225000
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 6 ports detected
    ppdev: user-space parallel port driver
    ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
    PCI: Setting latency timer of device 0000:00:1d.0 to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003060
    usb usb5: configuration #1 chosen from 1 choice
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1f.3[b] -> GSI 21 (level, low) -> IRQ 21
    ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:01:00.0 to 64
    NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.09 Wed Jun 4 23:43:17 PDT 2008
    ACPI: PCI Interrupt 0000:07:03.0[A] -> GSI 19 (level, low) -> IRQ 19
    ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 19
    PCI: Setting latency timer of device 0000:00:1d.1 to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
    uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003040
    usb usb6: configuration #1 chosen from 1 choice
    hub 6-0:1.0: USB hub found
    hub 6-0:1.0: 2 ports detected
    ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[93004000-930047ff] Max Packet=[2048] IR/IT contexts=[4/8]
    input: PS/2 Logitech Mouse as /class/input/input5
    parport_pc 00:07: reported by Plug and Play ACPI
    parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
    ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1d.2 to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
    uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003020
    usb usb7: configuration #1 chosen from 1 choice
    hub 7-0:1.0: USB hub found
    hub 7-0:1.0: 2 ports detected
    lp0: using parport0 (interrupt-driven).
    EXT3 FS on sda1, internal journal
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on sda2, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    Adding 1044216k swap on /dev/sda4. Priority:-1 extents:1 across:1044216k
    ieee1394: Host added: ID:BUS[0-00:1023] GUID[0090270001d98f6c]
    eth0: Link is Up 100 Mbps Full Duplex, Flow Control: None
    eth0: 10/100 speed: disabling TSO
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    eth0: no IPv6 routers present
    ACPI: PCI interrupt for device 0000:00:1b.0 disabled
    ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
    PCI: Setting latency timer of device 0000:00:1b.0 to 64
    uname -a :
    [matt@Arch ~]$ uname -a
    Linux Arch 2.6.25-ARCH #1 SMP PREEMPT Thu Jul 3 20:29:23 CEST 2008 i686 Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz GenuineIntel GNU/Linux
    hwdetect --show-modules
    [matt@Arch ~]$ hwdetect --show-modules
    AGP : agpgart intel-agp
    ACPI : button dock processor thermal
    PATA : pata_acpi pata_marvell ata_generic
    SCSI : scsi_mod sd_mod sr_mod
    SATA : ata_piix
    USB : usbcore ehci-hcd uhci-hcd
    FW : firewire-core firewire-ohci firewire-core firewire-ohci ieee1394 ohci1394
    NET : e1000e ppp_generic slhc
    INPUT : evdev pcspkr psmouse serio_raw
    SOUND : snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore
    VIDEO : nvidia
    OTHER : cdrom lp ppdev i2c-i801 i2c-core parport parport_pc pci_hotplug shpchp rtc-cmos rtc-core rtc-lib crc-itu-t
    Last edited by opeth115 (2008-07-09 13:10:16)

    sam wrote:
    I have the same soundcard (or at least the same modules loaded) and I'm getting good volume. 
    Things to check:
    If you have the pcm and main volume all the way up in alsa mixer that should be it.  You may have to adjust the volume separately if you use esd, arts, pulse, or jack (I don't use them). 
    Another thing to test is to make sure your using alsa not oss, and you may want to raise the oss level and see what happens. 
    The final thing is you want to check to see which sound device the audio programs are using (usually found in the preferences).
    If none of that works, then you're out of luck.  It would help if you post what sound programs you are using and what sound daemons you are using.
    Here is my Daemons line from /etc/rc.conf
    DAEMONS=(@syslog-ng @network @netfs @crond @alsa @hal @fam)
    So i would think im using alsa not oss.  but how would i go about raising the oss to make sure?  there is no "oss" option in alsamixer.  I have tried just abuot every audio progream there is and even firefox, all of them produce about half of the maximum volume level.

  • TS1717 I got this message every time i connect my iphone to itunes.. said 'iTunes was unable to load provider data from Sync Services. Reconnect or try again later.' so please help me to solve out this problem..

    I got this message every time i connect my iphone to itunes.. said 'iTunes was unable to load provider data from Sync Services. Reconnect or try again later.' so please help me to solve out this problem..

    In the course of your troubleshooting to date, have you also worked through the following document?
    iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert

  • My new ipod touch 4g that i just got is running extremely slow and the apps crash alot. I have about 10gb left out of 16 gb. When i got it, it was brand new, and ran like how it is now. I was just wondering if this could be some sort of defect?

    My new ipod touch 4g that i just got is running extremely slow and the apps crash alot. I have about 10gb left out of 16 gb. When i got it, it was brand new, and ran like how it is now. I was just wondering if this could be some sort of defect?

    My new ipod touch 4g that i just got is running extremely slow and the apps crash alot. I have about 10gb left out of 16 gb. When i got it, it was brand new, and ran like how it is now. I was just wondering if this could be some sort of defect?

  • My osx version is 10.8.2. i was buying the facetime app for my mac. i got this error -"FaceTime can't be installed on "Macintosh HD" because the version of OS X is too new." so please help me out of this funny situation.

    my osx version is 10.8.2. i was buying the facetime app for my mac. i got this error -"FaceTime can’t be installed on “Macintosh HD” because the version of OS X is too new." so please help me out of this funny situation.

    https://www.apple.com/support/mac-apps/facetime/

Maybe you are looking for

  • How do i create a little network with my i-mac and macbook

    how do i create a little network with my i-mac and macbook

  • Mac Pro 2.66 dual core xeon & FCX

    Hey guys, I'm trying to run Final Cut X but my Mac Pro needs a new open CL graphics card and I can't locate anything that will fit my Mac Pro Any suggestions are greatly appreciated. My Mac is a: Mac Pro 2.66 Dual core Xeon

  • How do I select a Contacts group in iCloud

    I don't want my Mac's list of All Contacts on my portable devices.  iTunes let's me synch a selected group of contacts.  Can I do this in iCloud?  Also, now that iCloud has pushed All Contacts onto my iPhone, how do I remove it from both places (iClo

  • Creation and Modification dates for android file system

    Hello all, I am working on a project and i noticed a particular scenario where i'm getting an error everytime i try to run the code below on my android device;                 var file:File=File.applicationDirectory.resolvePath("amf.js");            

  • Does anyone know how to open the 24" iMac?

    I have the 2.8Ghz 24" iMac. Does anyone know how to open it? Unfortunately the whole thing is screwless.