WAS is not starting up
Hi All,
When trying to start WAS 7.0 through MMC ,its not coming up.
The nodes are restarting again and again.Even the Jcontrol.exe is also in "starting the process".
Developer trace for Jcontrol is showing error
"JStartupICheckFrameworkPackage: can't find framework package J:\usr\sap\S01\JC00\exe\jvmx.jar".
Any ideas how to fix it?
Regards
Ajay
Hi Ajay,
You said "server nodes restart before system comes up properly". If this is the case, how did you check "System info" page?
In that case, you should be able to connect to Visual Admin too, (obviously before server node goes down) again.
I hope, you are aware, how to install J2EE license with the help of Visual Admin?
In case, if some critical services are not comming up properly, system node strats but max. 4 times. you can check this with "jcmon pf=<Instance Profile>" command.
If this is the case, you can check the server start-up logs for the errors.
Inf your server node keeps restarting for ever, check you JVM configuration. May be some fine tuning of Memoty Parameters will help in fixing the problem.
It would be good, if you post, jcmon status. dev_jcontrol & std_server0.log. It will help us in understanding your problem better.
Regards,
-Pankaj Kapote
Similar Messages
-
Question
I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
'''(in English)'''Hi Danny,
Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
but not 180, right?
I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
=COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
or
=SUM(IIF(Fields!TICKET_STATUS=4,1,0))
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support -
The error console suggests that there is a missing semicolon in the code. It's unclear whether this is in the Firefox code or the Java script code, or for that matter whether it's the source of the problem. In any event the only way both times I have been able to get Firefox to work again is to download and reinstall it again. How can I stop this cycle and get Firefox to update correctly? My computer runs Windows 7, 64-bit.
I was almost driven crazy by this problem. My Premiere CS6 displays error 0xc000007b exactly like your situation. I tried every method on the internet but none of them worked.
Including copying the msvcr100.dll to the Premiere folder. Nothing happened.
But this one sounds reasonable, comparing to some guess like video card problem or something.
Since I don't use ilivid or something like this. So I thought maybe there was some file else which my computer lacked.
But I don't know what it is.
Then I got an idea.
Here is what I did:
Copy all the AE CS6 .dll file in "Support Files" folder.
Backup all the .dll files in Premiere CS6 folder.
Paste and replace them all!
Then I found that Premiere Pro was able to start up. But unfortuately, it stopped in half.
Well. Maybe I shouldn't click "replace".
So I went back to the backup folder. Copied the origin .dll files.
Paste and replace again!
That's equal to choose "Not replace" at the first time.
Now everything came back to normal.
I want to get a sleep. -
Just tried 3 times to update iTunes on my PC running Vista. There was an error. It stopped the installation. Now iTunes will not start at all. The error message tells me to reinstall which I tried but did not work. What should I do?
Hello, Jdragone.
Thanks for the question. Start with completely uninstalling iTunes and all of it's components in the order specified in the article below. Once this is done, download and install iTunes.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
If you receive any errors when uninstalling any components of iTunes, try the steps in the article below for each component that gives you an error.
"The feature you are trying to use is on a network resource that is unavailable" alert appears when removing Apple software in Windows
http://support.apple.com/kb/TS3704
Cheers,
Jason H. -
Illustrator CS2 and InDesign CS2 not starting - here is how it was solved.
This document is merely a compilation of information found at the sources named at the bottom of this document.
Basically running older Adobe CS2 Software on a MacBook Pro 10.6.x Snow Leopard - probably like many of you that either can't afford the upgrade to CS3, CS4 or CS5, or maybe don't see the need to do so. It's running good but it is slow since it is using Rosetta, but it does work - well, used to work.
Illustrator CS2, InDesign CS2, Photoshop CS2, etc. were all running fine after the upgrade to Snow Leopard (under 10.6, 10.6.1 and 10.6.2). Then the update to 10.6.3 was installed. At the same time a bunch of other updates - including the Acrobat 8.2 update - were installed. Not really sure what did it, but all of a sudden Illustrator CS2 stopped responding at the start up screen - no longer started up and InDesign CS2 popped the registration/licensing screen. When trying to enter license info on first key press the application quit entirely.
So maybe the 10.6.3 update was the culprit. Never even thought that it could be the Acrobat 8.2/8.2.1 updates. Then I found this thread here:
http://forums.adobe.com/thread/613287?tstart=0 (good reading)
Which ultimately pointed me the the instructions here:
>start quote from http://kb2.adobe.com/cps/534/cpsid_53468.html
Replace the corresponding files present in the “ /Library/Application Support/Adobe/TypeSpt/Unicode/Mappings/” folder with the one attached to this document.
Download the attached Mac.dmg (http://kb2.adobe.com/cps/534/cpsid_53468/attachments/Mac.dmg) file to a machine where the issue is seen.
Close all Adobe applications
Double Click the Mac.dmg file to mount it.
Copy Mac folder from mounted image. Paste it to /Library/ApplicationSupport/Adobe/TypeSpt/Unicode/Mappings/.
A message appears to confirm to replace the existing 'Mac' folder. Replace the 'Mac' folder.
Launch Illustrator or InDesign CS or CS 2.
The Mac folder attached to this KB document already has the correct permissions set, so it should not be necessary to complete the steps below. However there may be cases where the permissions for the Mac folder get overwritten. In such a case, the original issue can reoccur. To solve this issue, complete the steps below:
Follow Solution 1 and make sure that all Adobe applications are closed.
Right or Control click and select 'Get Info' on the Mac folder in “ /Library/Application Support/Adobe/TypeSpt/Unicode/Mappings/”, which you have copied from the .dmg file attached to this document.
Verify that under 'Sharing and Permissions' all users listed have no write access
If a change is required, click the padlock symbol and provide your Administrator credentials
Select the user which has Write access and change it to 'Read Only'.
Ensure the user 'Everyone' is set to 'No Access.
To check if the issue has been solved, launch Acrobat 8.2 and then Illustrator or InDesign CS or CS 2.
< end quote
Even after following the instructions still "no love" from Illustrator CS2 or InDesign CS2. InDesign did no longer show the registration screen, but it didn't continue launching, and Illustrator progressed further along in the start up sequence but also never finished launching.
Then I found another article on the adobe site. I am just quoting the part performed and which ultimately did the trick.
>start quote from http://kb2.adobe.com/cps/326/326388.html
Steps 1 and 2 are not relevant so no need to do them
3. At the Finder, choose File > Find.
4. TypeAdobeFnt10.lst (Illustrator CS2), select the system drive, and then press Return.
5. Delete all AdobeFnt10.lst files found.
6. Restart the computer.
7. Restart Illustrator. Illustrator creates a new Adobefnt10.lst or AdobeFnt07.lst file.
< end quote
So, this solved the problems at least for the time being. Hope this helps someone else a bit.
Download files:
http://kb2.adobe.com/cps/534/cpsid_53468/attachments/Mac.dmg
Sources:
http://forums.adobe.com/thread/613287?tstart=0
http://kb2.adobe.com/cps/534/cpsid_53468.html
http://kb2.adobe.com/cps/326/326388.htmlIllustrator CS2 stopped working for me on Snow Leopard as well. What it all boiled down to was not to update to 12.0.1. Not sure which release of Snow Leopard I was on when I figured that out but I keep up-to-date, am now at 10.6.6 and CS2 still works fine. I keep getting prompted to update to 12.0.1 from time to time but just cancel it.
I'm fairly sure I was at 12.0.1 already when I moved from Leopard to Snow Leopard and it was that, not a Snow Leopard update, that "broke" CS2 12.0.1. If I remember correctly, if you now try to apply the update, it won't go through with it anyway. -
My iTunes will not start. The box on the error message APSDaemon.exe, And message says "This application failed to start because MSVC80.dll was not found. Reinstalling may fix." I did the reinstall and I get the same error. The error first happened after I approved the an iTurns update.
Same problem today. Took five times to reinstall without any error messages. Apple has posted a way to fix and you should follow their's first. I finally got to upldate correctly by doing their fix but with one difference. I did the following:
1) Went to the C:\program files (x86)\iTunes and C:\program files\iTunes folders and moved every file ending in .dll to the desktop (even if two files in same location had the same name, just replace)
2) Restarted computer and still got error message
3) Uninstalled all apple programs possible in the following order......itunes, apples software update, apple mobile device support, bonjour, and apple application support.....all performed using the microsoft control panel
4) put all the .dll files on the desktop in the trash and emptied (this is a step apple support did not specifically put in their fix but for a final try I wanted to delete everything apple).
5) Restarted computer.
6) Re-installed itunes from apple website
No error messages during re-install and was able to open shortcut in one try. Even updated my ipad to make sure everything was working. -
I have a MacBook pro that has power issues and will not start but the hardrive is fine. I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase a new one? Also, the software is not updated as the computer hasn't worked for about 2 months.
Also, if it is possible to transfer the hardrive, would my iTunes music transfer as well? It is not saved in the cloud.
Thanks for your help, it is much appreciated.You computer is probably perfectly repairable, but if you want a new one anyway, it is perfectly possible to transfer the data from the faulty one.
But it would be a mistake to simply put the old HD in the new computer.
These are the steps:
Remove Hard drive from faulty computer. (very easy on Unibody MBPs, do-able but not so easy on older MBPs)
Put it in a cheap enclosure
Connect it the new computer
Boot up new computer.
If the new computer has never been run before the Setup Assistant will ask if you want to import your apps, data, settings etc from either another mac, another HD connected to the Mac or a Time Machine back up.
Obviously chose the second option (another HD connected to this Mac) and follow prompts.
If the new computer has already been run (so Setup Assistant doesn't run when you boot it up), you will need to use Migration Assistant...or run the installer again so that Setup Assistant runs again.
Message was edited by: Mike Boreham...added sec on line -
My mac book pro does not connect but shows an error message with a question mark on the screen.I took it to a retailer that said it was not reconizing the hard drive.He said i needed a new hard drive but it may be something else as well but he was sure a new hard drive would fix it.So putting faith in someone who deals with them i purchased a new hard drive to find it was still not working although he said the computer did know reconize the hard drive and i may have to send it away to get it checked .After already paying 120 pounds for a new hard drive and they wanting another 80.00 pounds to diagnose it i am a little sceptical.
That's why i am interested on anyone's help.Welcome to the Apple Support Communities
I think that your Mac detects your hard disk, but the problem is that your new hard disk doesn't contain any operating system, so your Mac doesn't find any bootable partition and you see a question mark.
If your Mac came with DVDs, insert the Mac OS X Install DVD and hold the C key while your Mac is starting. Then, just install Mac OS X. If the hard disk isn't prepared to install Mac OS X, you will have to erase it using "Mac OS Extended (Journaled)". See > http://pondini.org/OSX/DU1.html -
After upgrading from Snow Leopard to Lion I cannot access a PGP drive which was generated under snow leopard. PGP does not start. When I try to start I just receive a message that Lion cannot work with PGP. How can I now access important and confifential informatio which I have stored in PGP (snow leopard). Do I have to move back to snow leopard. If so, how can I do this?
If you have this product,
http://www.symantec.com/business/support/index?page=content&id=TECH165159
you have to go back to Snow Leopard.
To re-install SL, back up your home directory, format and re-install. -
I have had problems with iTunes lately it says iTunes was not installed correctly and to reinstall. I tried 3x and still will not. Now I get a message it can not start because MSVCR80.dll is missing reinstall to fix??
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
Computer has Windows 7 Ultimate 64bit. Firefox has run fine for over a year on this computer. Nothing was changed or updated except Windows update shows that it installed updates on Aug 19. I had computer off for week before because out of town, came back and started on Aug 18, but Firefox worked on that day. Did not use FF again till today. Today on Aug 22nd, firefox will not start, shortcut icon has changed to program not there. Exe in folder when clicked brings up error message say the version of this file is not compatible with version of Windows I am running. Firefox exe shows created Aug 20. I suspect update, either Windows or FF but lean towards windows, happened that broke things. I notice IE 10 updates, .NET framework updates and malicious software removal tool updates were installed. I have tried restarting computer, did not fix. Tried to run as admin, didn't work. I do not want to uninstall FF unless have to because of all the stuff I have in there, bookmarks, last pass passwords, etc.
Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files ('''not the profile folder where the bookmarks are stored''') and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you. -
My Mac Mini was not sending a signal to the monitor. I powered down using the power button and now it will not start. When i power up I get a strange 2 tone sound, like a warning alarm. The fan starts, and the light comes on, but no screen.
I have tried with a wired USB keyboard and mouse using a single screen. Powered up with option pressed. No change.
Reset SMC no changeRun the Apple hardware test to see what it tells you. Run the extended test when prompted, which can take awhile.
-
When install iTunes 11.1.4 It says Apple Mobile Device Service service will not start. It was started when I began the installation. Is this an Apple software bug?
I have this issue. It isn't the MSVCR80 issue. No matter what I do nothing will let me even INSTALL Apple Moblie Device. Further details are in my thread:
https://discussions.apple.com/thread/5831093 -
I recently connected my iPhone to my computer, iTunes would not start... I got error: "applcation failed to start because MSVCR80.dll was not found. Re-installing the appliacation may fix the problem." When I tried reinstalling it failed - it said insufficient permission. I have administrative rights... please, any help and/or ideas will be appreciated.
Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80. -
EP6 on WAS 6.40 SP9 - ssl service does not start
Try to start the service SSL provider within Visual Administrator (dispatcher->services->ssl provider) - but this error occurrs:
java.rmi.RemoteException: Could not start service ssl on cluster ID 9788500; nested exception is:
com.sap.engine.frame.ServiceException: <--Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='Service ssl error. Nested exception is: com.sap.engine.frame.ServiceException: Full IAIK JCE library not found
at com.sap.engine.services.ssl.dispatcher.DispatcherService.start(DispatcherService.java:67)
at com.sap.engine.core.service630.container.ServiceRunner.startCommunicationServiceFrame(ServiceRunner.java:214)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:156)
at com.sap.engine.frame.core.thread.Task.run(Task.java:60)
at com.sap.engine.core.thread.impl6.SingleThread.execute(SingleThread.java:72)
at com.sap.engine.core.thread.impl6.SingleThread.run(SingleThread.java:142)
Needless to say that the IAIK library was deployed with the installation.
Do you have any hints?
Kind Regards
HKUse SDM to deploy the Crypto toolkit.
I note though you have issues with the JCE. If you have upgraded your JDK then the JCE got lost. You need to re-deploy that - by unzipping it in the lib directory of your JDK.
Of course the same happens if you never installed the SUN JCE to begin with.
Nick
Maybe you are looking for
-
Guys, Any idea why I am unable to download assets from Adobe Market Place. I am using Adobe CC enterprise.
-
I downloaded the recent upgrade (includes safari, quick time, and an iTunes update). All went well but after restarting my computer I had 2 iTunes icons on my desktop. When trying to open one I received the "This action is only valid for products tha
-
How can I sync my iPhone with the new iTunes without erasing my iPhone?
My iTunes computer crashed and I needed to format it. How can I sync my iPhone with the new iTunes without erasing my iPhone?
-
ABUMN: Posting with trans.type 300 not possible (No acquisition posted)
Hello everyone, I have seen a few threads on this topic, however I am still not finding a resolution to my issue. I am very new to the FICO configuration scene and probably need a little more hand holding than the others who have asked this question
-
How is it possible to set and get layer style parameters? For example read out stroke size, shadow distance, etc...