WAS Sneak Preview Installation problem???

Hi,
I was successful in installing the WAS sneak preview installation from sdn.but since I had problems in using sdm password for deploying webdynpro I uninstalled the entire setup of sneak preview.
Again when I tried to install sneal preview,it is stopping at 17th phase of 28 for a long time.The phase is "Load Java Database content".Neither it is giving any error in log file nor moving forward to next step for more than 2 -3 hours.
Has anybody encountered this problem earlier?
Useful answers will be suitably rewarded.
Regards,
RK

Hi,
it could very well be that your LOG volume is filled 100%. Please check your (<drive>:\sapdb\data\wrk\<SID>\)knldiag and/or knldiag.err file for LOGFULL messages.
In order to free up log, you need to make a Log backup. Prior to your first Log backup, you need to have made a Data backup.
So, if you haven't done any of the above previously, you would need to:
1. define backupmedia for both Log and Data backups
2. perform a data backup using the data backupmedium created in step 1
3. perform a log backup using the log backupmedium created in step 1
Afterwards, you could also create an Autolog backupmedium and switch on the Autologging feature, it would save the log automatically from filling to that degree.
All done conveniently using the Database Manager GUI.
Regards,
Roland

Similar Messages

WAS Sneek Preview Installation Problem

Hi ,
I am trying to Install Sneak Preview WAS. I have met all the system requirements. But while installation when it tries to run J2EE (Second Last Step) , it fails there.
Any idea what is going wrong or let me know if more inputs are needed
it is now 2 weeks and i am not able to make out what is wrong.
COULD YOU PLEASE GIVE ME PROPER STEP BY STEP PROCESS OF INSTALLATION.
Thanks
Rajiv Gupta
Hi ,
I am not sure what log file you need , because it makes a lot files. this is last few lines of Installation Log which it show while installation.
Please help me !!!
INFO 2004-08-18 17:50:30
Output of C:/DOCUME1/dhira/LOCALS1/Temp/sapinst_exe.3232.1092863868/SAPCAR.exe '-x' '-v' '-g' '-i' '-n' '-R' 'C:\usr\sap/J2E/JC00/j2ee/os_libs' '-f' 'SCSCLIENT32UC.SAR,':
INFO 2004-08-18 17:50:33
Copying file C:/Program Files/sapinst_instdir/j2ee-sneak-preview/install/callSdmViaSapinst.log to: C:/Program Files/sapinst_instdir/j2ee-sneak-preview/install/callSdmViaSapinst.30.log.
INFO 2004-08-18 17:50:33
Copying file C:/Program Files/sapinst_instdir/j2ee-sneak-preview/install/callSdmViaSapinst.log to: C:/Program Files/sapinst_instdir/j2ee-sneak-preview/install/callSdmViaSapinst.30.log.
INFO 2004-08-18 17:50:33
Creating file C:\Program Files\sapinst_instdir\j2ee-sneak-preview\install\callSdmViaSapinst.30.log.
INFO 2004-08-18 17:50:34
Copying file C:/Program Files/sapinst_instdir/j2ee-sneak-preview/install/java.exe.log to: C:/Program Files/sapinst_instdir/j2ee-sneak-preview/install/java.exe.30.log.
INFO 2004-08-18 17:50:34
Copying file C:/Program Files/sapinst_instdir/j2ee-sneak-preview/install/java.exe.log to: C:/Program Files/sapinst_instdir/j2ee-sneak-preview/install/java.exe.30.log.
INFO 2004-08-18 17:50:34
Creating file C:\Program Files\sapinst_instdir\j2ee-sneak-preview\install\java.exe.30.log.
INFO 2004-08-18 17:50:34
Removing file C:/Program Files/sapinst_instdir/j2ee-sneak-preview/install/java.exe.log.
INFO 2004-08-18 17:50:34
Creating file C:\Program Files\sapinst_instdir\j2ee-sneak-preview\install\java.exe.log.
INFO 2004-08-18 17:50:34
Working directory changed to C:\Program Files\sapinst_instdir\j2ee-sneak-preview\install.
INFO 2004-08-18 17:50:34
Output of C:\j2sdk1.4.2_05/bin/java.exe '-Xmx256M' '-Djava.ext.dirs=C:\usr\sap/J2E/JC00/SDM/program/lib;C:\j2sdk1.4.2_05/jre/lib/ext' '-jar' 'C:\usr\sap/J2E/JC00/SDM/program/bin/SDM.jar' 'jstartup' 'mode=integrated' 'sdmhome=C:\usr\sap/J2E/JC00/SDM/program' 'logfile=C:\Program Files\sapinst_instdir\j2ee-sneak-preview\install/callSdmViaSapinst.log' is written to the logfile java.exe.log.
INFO 2004-08-18 17:50:37
Execution of the command "C:\j2sdk1.4.2_05/bin/java.exe '-Xmx256M' '-Djava.ext.dirs=C:\usr\sap/J2E/JC00/SDM/program/lib;C:\j2sdk1.4.2_05/jre/lib/ext' '-jar' 'C:\usr\sap/J2E/JC00/SDM/program/bin/SDM.jar' 'jstartup' 'mode=integrated' 'sdmhome=C:\usr\sap/J2E/JC00/SDM/program' 'logfile=C:\Program Files\sapinst_instdir\j2ee-sneak-preview\install/callSdmViaSapinst.log'" finished with return code 0. Output: Starting SDM - Software Deployment Manager...tc/SL/SDM/SDM/sap.com/SAP AG/6.3004.00.0000.20040204183620.0000Initializing Network Manager (50017)Checking if another SDM is running on port 50018
Operationmode for JStartupFramework set to "integrated".
Successfully executed. Return code: 0
INFO 2004-08-18 17:50:45
Switched to user: j2eadm.
INFO 2004-08-18 17:50:45
Copying file C:/Program Files/sapinst_instdir/j2ee-sneak-preview/install/msclients.exe.log to: C:/Program Files/sapinst_instdir/j2ee-sneak-preview/install/msclients.exe.1.log.
INFO 2004-08-18 17:50:45
Copying file C:/Program Files/sapinst_instdir/j2ee-sneak-preview/install/msclients.exe.log to: C:/Program Files/sapinst_instdir/j2ee-sneak-preview/install/msclients.exe.1.log.
INFO 2004-08-18 17:50:45
Creating file C:\Program Files\sapinst_instdir\j2ee-sneak-preview\install\msclients.exe.1.log.
INFO 2004-08-18 17:50:45
Removing file C:/Program Files/sapinst_instdir/j2ee-sneak-preview/install/msclients.exe.log.
INFO 2004-08-18 17:50:45
Creating file C:\Program Files\sapinst_instdir\j2ee-sneak-preview\install\msclients.exe.log.
INFO 2004-08-18 17:50:48
Switched to user: j2eadm.
INFO 2004-08-18 17:50:48
Working directory changed to C:\Program Files\sapinst_instdir\j2ee-sneak-preview\install.
INFO 2004-08-18 17:50:48
Output of C:\usr\sap\J2E\SYS\exe\run/msclients.exe '-mshost' 'KCZ5BPR' '-msserv' '3601' is written to the logfile msclients.exe.log.
INFO 2004-08-18 17:50:52
Execution of the command "C:\usr\sap\J2E\SYS\exe\run/msclients.exe '-mshost' 'KCZ5BPR' '-msserv' '3601'" finished with return code 0. Output:
CLIENT-NAME HOST SERVICE (NET) SERVICES (SAP)
INFO 2004-08-18 17:50:54
Switched to user: j2eadm.
INFO 2004-08-18 17:50:54
Creating file C:\Program Files\sapinst_instdir\j2ee-sneak-preview\install\jcmon.exe.log.
INFO 2004-08-18 17:50:56
Switched to user: j2eadm.
INFO 2004-08-18 17:50:56
Working directory changed to C:\Program Files\sapinst_instdir\j2ee-sneak-preview\install.
INFO 2004-08-18 17:50:56
Output of C:\usr\sap/J2E/JC00/j2ee/os_libs/jcmon.exe 'pf=C:\usr\sap\J2E\SYS\profile/J2E_JC00_KCZ5BPR' is written to the logfile jcmon.exe.log.
INFO 2004-08-18 17:51:01
Execution of the command "C:\usr\sap/J2E/JC00/j2ee/os_libs/jcmon.exe 'pf=C:\usr\sap\J2E\SYS\profile/J2E_JC00_KCZ5BPR'" finished with return code 0. Output: snipped
INFO 2004-08-18 17:51:03
Switched to user: j2eadm.
INFO 2004-08-18 17:51:05
Switched to user: j2eadm.
INFO 2004-08-18 17:51:05
Working directory changed to C:\Program Files\sapinst_instdir\j2ee-sneak-preview\install.
INFO 2004-08-18 17:51:05
Output of C:\usr\sap/J2E/JC00/j2ee/os_libs/jcmon.exe 'pf=C:\usr\sap\J2E\SYS\profile/J2E_JC00_KCZ5BPR' is written to the logfile jcmon.exe.log.
INFO 2004-08-18 17:51:10
Execution of the command "C:\usr\sap/J2E/JC00/j2ee/os_libs/jcmon.exe 'pf=C:\usr\sap\J2E\SYS\profile/J2E_JC00_KCZ5BPR'" finished with return code 0. Output: snipped
INFO 2004-08-18 17:51:13
Switched to user: j2eadm.
INFO 2004-08-18 17:51:15
Switched to user: j2eadm.
INFO 2004-08-18 17:51:15
Working directory changed to C:\Program Files\sapinst_instdir\j2ee-sneak-preview\install.
INFO 2004-08-18 17:51:15
Output of C:\usr\sap/J2E/JC00/j2ee/os_libs/jcmon.exe 'pf=C:\usr\sap\J2E\SYS\profile/J2E_JC00_KCZ5BPR' is written to the logfile jcmon.exe.log.
INFO 2004-08-18 17:51:20
Execution of the command "C:\usr\sap/J2E/JC00/j2ee/os_libs/jcmon.exe 'pf=C:\usr\sap\J2E\SYS\profile/J2E_JC00_KCZ5BPR'" finished with return code 0. Output: snipped
INFO 2004-08-18 17:51:20
Creating file C:\Program Files\sapinst_instdir\j2ee-sneak-preview\install\start_J2E_JC00.log.
INFO 2004-08-18 17:51:20
Output of C:\usr\sap\J2E\JC00\exe/startsap.exe 'name=J2E' 'nr=00' 'SAPDIAHOST=KCZ5BPR' is written to the logfile start_J2E_JC00.log.

Hi Rajiv,
There is no error found here in the log file.
Does it give you an error message while installation (at 2nd last step) or is it that it just doesnt go ahead?
I believe it is taking sometime to start the server. Can you do one thing, can you just look into the management console and see which elements are running there?
I had this problem, but then i just waited for the server to start and then i restarted the sapinst.exe and it worked.
Do not start sapinst.exe untill the J2EE Server starts completely. Check it in the Management consile before you start the installation. If you restart the computer and check it after sometime, you will find all the processes running, then you can continue with the installation. I am sure this should solve your problem.
Mark the question as closed if this solves your problem and do remember to reward points if this anwser helps you solve your problem.

Netweaver7.0 Sneak preview installation

Hi All,
I am trying to install Netweaver7.0 sneak preview at my local PC. I have met all required configuration for installation. I am getting an error at step 3 , while setting OS User Passwords.
1)I have manually created two users
SAPServiceJ2E
SAP System > OS User Passwords
Default is abcd1234, ie. the master password. If the password does not match you Windows password policy (eg., 10 letters, at least on digit), installation will fail.

Hi, I can't find the forum we are supposed to use for sneak preview installation support. I'm new here, so maybe it's obvious and I'm just missing it.... Could you help us out and provide a link?
Thanks!
On edit: Okay never mind, found the link on the download page...for anyone else who is looking, here it is:
Software Downloads
Message was edited by: Margaret Hilsbos

Pls F1.. problem with NW sneak preview installation

i just downloaded nw dev stu 2.0.7 sneak preview...successfully.
now then..when i did try to install by executing SAPsetup.exe i get this msg
"This application has failed to start because sapfeiut.dll was not found,Re-installing the application may fix this problem."
let me know what do i do.....its urgent that i get started with the portal basics...pls F1 asap.
regards,
satish

poste next question to the old thread.

Sneak preview Installation error, file source.properties not found

Hi all,
I am trying to install sneak preview (SAPNW2004sJavaSP9_Trial) with j2sdk-1_4_2_09 and jce_policy-1_4_2.zip as specified. The Installation was success upto a while but when I pass parameters to "secure store settings" it says there is no source.properties file in sneakpreview\java\ like that. If somebody have met with a similar problem and could overcome please help. Helping answer rewarded.
Thanks & Regards,
Sai Krishna. K

Hi Konchada,
Pls tell how you solved this problem...
I am in need of it... Thanks
Regards/ Guru

NW04 SP11 preview installation problem

Hi all,
I am having problems installing the Sneak Preview NW04 SP11 Java version.
It gives we following error:
WARNING 2005-09-25 21:17:06 Error 5
(Access is denied.) in execution of a 'RegOpenKeyEx' function, line (67), with parameter (SYSTEM\CurrentControlSet\Services\SBCore).
WARNING 2005-09-25 21:17:06 The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SBCore' does not exist on the 'localhost' host.
WARNING 2005-09-25 21:17:06
The step setDefaults with step key J2EE_SystemCopy_OneHost|ind|ind|ind|WebAS|640|0|J2EE_SystemCopy|ind|ind|ind|ind|ind|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|setDefaults was executed with status ERROR.
WARNING 2005-09-25 21:17:15
An error occurred during the installation.
I am using the Administrator account - but somehow it seams like that aint enough??
Please help me...
Best reagards
Lars

Hi everybody,
I have now found the solution.
The server i am installing on is my domain controller, and have SBS2003 (small business server 2003) installed - this should always be the domain controller...say Microsoft!
But i works if I using CMD with REGEDT32.exe and editing the registry key (SYSTEM\CurrentControlSet\Services\SBCore) so that Adminsitrator have FULL acccess
Remember us edit the Control.xml file if you are using the domain account - just like phillip has described:
***Phillip says:***
In this case the relevant settings are stored in "<Location_Of_SAPINST.EXE>\ADA\control.xml", which is being copied to "<SAPINST_INSTDIR>\j2ee_wp\installdefault\" during installation.
Before i started a new installation i searched the original "control.xml" for String "LocalAdmin".
I replaced:
'name:host + "
SAP_LocalAdmin"'
with
'name:this.getDomain() + "
SAP_LocalAdmin"'
and
'name:host + "
SAP_" + this.getSID() + "_LocalAdmin"'
with
'name:this.getDomain() + "
SAP_" + this.getSID() + "_LocalAdmin"'
The installation is still running at the moment, but far behind that point where the error always came up.
For me it looks very good.
SAP says installation on a DC is not supported, which not means that it would be impossible.
Remember to edit the "control.xml" at it's original location BEFORE you start the installation.
**end Phillip**
Thats it! - now the installation is running (still runnig )

Sneak opreview installation problem(URGENT)

Hi Friends,
I am not able to install sneak preview version successully.
I ma trying to install Java full edition 2004s.
I was getting problem, then I uninstalled my norton antivirus firewall, but somewhere it failed to install.
Now,. I am trying to uninstall it.
I find following error:-
TypeError: this._name has no properties (in script NW_Uninstall|ind|ind|ind|ind, line 5111: ???)

Hi Ankit,
If u are not able to uninstall it automatically then u have to remove it manually.Just delete all the folder and files which generates during installations and remove MaxDb from add/remove program and then remove the Entries related to Sap from Registry. When every thing will be removed then try to install from scratch.
But i m not sure that it will install or not because u did install Abap edition first.have u removed it properly or not? i think the better way is to erase the OS and install it from scratch.
Hope it helps
Regards
Subhash

Sneak Preview installation

I'm trying to install "SAP NetWeaver Enterprise Portal on MaxDB - Developer Edition Sneak Preview" In the final stages of Portal Installation, it is trying to "Start SAP J2EE Engine", But it keeps messages like
INFO 2005-03-21 17:20:15
J2EE Engine JC00 of SAP system J2E did not come up after 950 seconds: waiting for another 20 seconds.
Could anyone please help?
Thanks!

Hi,
this should resolve to a problem in the startup framework of the J2EE Engine. So you could check the troubleshooting tips listed in the documentation in order to locate the exact problem: <a href="http://help.sap.com/saphelp_nw04/helpdata/en/a2/bb0a412a06f023e10000000a155106/frameset.htm">The J2EE Engine Does Not Come Up After 800 Seconds</a>.
Hope that helps!

ABAP sneak preview installation

Hello,
I have installed EP6 SP11 java on my system. I would like to install ABAP sneak preview without removing EP6 SP11. Will there be any problem? If so is there any other way to do it without uninstalling EP6 SP11?

Hi,
First of all whay do you want ot install ABAP system on a JAVA system?
You can install ABAP system,then do a JAVA system installation,but the other way round is not possible.
I hope it helps.
Point please,if my answered helped.
Rgs
vikas

Netweaver Sneak Preview Installation hangs at phase 18 of 29

Downloaded Sneak Preview SAP Netweaver 04 Java edition file 1:NW04SneakPrevJavaSP11.part1.rar and file 2: NW04SneakPrevJavaSP11.part2.rar. Extracted into a directory and started installation using SAPInst.cmd.
Installation went thru fine till phase 17 and in phase 18 it is taking for ever to complete. Also in the status bar it shows EP_LOCK_APPLS loaded (1 rows). It has been in this phase 18 for more than 3 hours.
Any help is suggested.
thanks

Hi Chess,
I have also faced this problem several times very recently also.
This is mainly because of registry cleanup problems.Do as follows :-
1)goto start -> run -> type regedit.
2)Serach the entire registry for sapdb,maxdb,xserver instances and entries.
3)Delete all the nodes of the above sapdb,maxdb & xserver.
4)Only caution is if the left hand frame of the registry shows any environment values of sapdb,maxdb and xserver don't delete that particular node.
5)After all deletion double-check one more time in the registry and reboot your machine and start a afresh instaallation.During afresh installation the installation software should ask you for DB buffer cache size.If you get that you are sure that your registry is totally cleaned and fresh and definitely the installation will go through.
Hope it helps.
All the best.
Regards,
Guru Subramanian B.
P.S :- Consider rewarding points if my answers are helpful to you.

Web AS 6.40 sneak preview installation hangs

I try to install Web AS 6.40 sneak preview on My Windows XP machine. However, the installer hangs on this step:
"MaxDB Database Internal Installation (post processing)"
I have checked sapinst.log, sapinst_dev.log and XCMDOUT.log. There is no error message regarding MaxDB in it.
Am I missing something? Is there other place that I need to check?
I am running Windows XP Professional SP1. My machine has 1 GB of RAM and it has a Pentium M 1.6 GHZ CPU.
Thanks,
Alvin Ma

I waited for about 15 hours, and still no activity..
Apart from RAM , I have no issues in other front and there is no log activity for 14 1/2 hours.
RAM = 512 MB
Windows Service Pack 4
Internet Explorer 6
NTFS File System - Yes
J2SE SDK 1.4.2_03
Hard disk space = 15 GB
I increased the paging size to 1024 MB
Any thoughts, before I get way frustrated....
I must also add that, I am facing all the issues as indicated in the above posts and the issues are a perfect match.
If there is any more details that I need to add here, please let me know.
Regards,
Subramanian V.
P.S. I have just restarted it and I plan to wait for some time as well
Message was edited by: Subramanian Venkateswaran

NW2004 Sneak Preview installation

I am trying to install NW2004-SP16-Sneak-Preview on a 2 GB laptop with {Windows XP-MediaCenter Edition-Version 2002-SP2).
The installation finished successfully.The database and java instances have started successfully.
When we try to login like http://localhost:50000/irj, I get an error " 503 service unavailable
application stopped "
Details: You have requested an application that is currently stopped".
Does anyone has a solution to this issue?. is it any thing do to with the Media Center Edition?.
Any help is greatly appreciated.
Regards
Selvam

Hi Selvam,
Is the J2EE home page i.e http://localhost:50000 opening?
If yes, then probably the irj application might not be
running. Go to Visual Administrator usr/sap/.../j2ee/admin
go.bat -> server -> services -> deploy -> applications
and start the sap.com/irj application.
Regards
Srikishan

SAP sneak preview installation error reg MaxDB

Hello,
I am trying to install SAP sneak preview for Netweaver.
I made it till here working through various hurdles ,now I am little lost .The installation is having issues on step 13 of 40
I looked up the xcmdout log and the last few lines are below.
Please let me know of a way to proceed with installation.
ubprocess starts at 20070222030959
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,******** param_directput MCOD NO
Execute Session Command : exit
> Subprocess stops at 20070222031011
OK
> Subprocess starts at 20070222031011
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,********
Execute Session Command : param_startsession
Execute Session Command : param_checkall
Execute Session Command : param_commitsession
Execute Session Command : exit
> Subprocess stops at 20070222031026
OK
OK
OK
> Subprocess starts at 20070222031027
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,******** param_addvolume 1 DATA C:\sapdb\J2E\sapdata\DISKD0001 F 128000
Execute Session Command : exit
> Subprocess stops at 20070222031039
OK
> Subprocess starts at 20070222031039
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,******** param_addvolume 2 DATA C:\sapdb\J2E\sapdata\DISKD0002 F 128000
Execute Session Command : exit
> Subprocess stops at 20070222031051
OK
> Subprocess starts at 20070222031051
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,******** param_addvolume 1 LOG C:\sapdb\J2E\saplog\DISKL001 F 25600
Execute Session Command : exit
> Subprocess stops at 20070222031103
OK
> Subprocess starts at 20070222031104
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,********
Execute Session Command : param_startsession
Execute Session Command : param_checkall
Execute Session Command : param_commitsession
Execute Session Command : exit
> Subprocess stops at 20070222031116
OK
OK
OK
> Subprocess starts at 20070222031119
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,******** db_start
Execute Session Command : exit
> Subprocess stops at 20070222031137
OK
> Subprocess starts at 20070222031137
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,******** db_state
Execute Session Command : exit
> Subprocess stops at 20070222031149
> Subprocess call failed
ERR
-24961,ERR_STATE: The operational state of the database instance could not be determined
-24994,ERR_RTE: Runtime environment error
no_id_provided_by_rte,no_text_provided_by_rte

Hi Shilpa,
Try incresing your virtual memory settings
Check out this link
Max-DB cannot determine current db state (NW2004s install)
Reward points if useful.
Thanks
Srinivas

NetWeaver Sneak Preview Installation

<b>Hi Eveybody:
I am trying to learn SAP Netweaver Enterprise Portals.
I just downloaded the three NetWeaver Sneak Preview files NWpart1 NWpart2 NWpart3
I want to install NetWeaver.If anybody knows, how to install it, Please let me know.
I really appreciate your help.
(and point too.)
Thanks in advance.
Ashok Kumar</b>

Hello ASHOK,
Unzip those three files under a directory of your choice. Then under your directory/smoke execute the start.htm page and there check the hardware and software requirements. If everything is ok, launch the installation process (there's a link for that purpose on the start.htm page).
Regards,
villalain

Sneak Preview Installation issue

Hi,
I'm trying to install the NW sneak preview 04 and it hangs on step 22 of 33. I have java 1.4.2_10 installed and it's running at 97 - 100% cpu capacity. There are no errors or warnings in the logs. Any help is appreciated!
- Rao

Hello Rao,
you had to downgrade your Java Version to 1.4.2_8. You can get it from http://java.sun.com/products/archive/.
Regards
Gregor

WAS Sneak Preview Installation problem???

Similar Messages

Maybe you are looking for