Was updating to 5.0.1 on iphone 3gs and now it wont recongize sim card
I was updating at iphone 3gs (8gig) to 5.0.1 after it was turned off and it restarted. it no longer recongized the sim card. What can I do now?
It was not. I bought i a few months ago for my fatherinlaw and I have only put some apps on it before trying to updated the iOS to 5.0.1. It was working fine before but once it restarted from updating to 5.0.1 it is now in a base mode of asking what language, turn on location services and for it to go on wifi. but when I attach it by wire to itunes it says the sim card is not installed.
Similar Messages
-
HT1766 i have restored my iphone 3gs and now it wont activiate
i restored my iphone 3gs and now it wont activate
it was given to me and yes you are right it was jailbroken. is there anyway to get around that or is the phone garbage?
-
I restored my sons Iphone 3gs and now it wont activate keeps saying there is no sim in
Hi can anyone help - i passed on my old iphone 3gs to my son,who had it unlocked in a shop so couldnt update software i asked Tesco to unlock properly they sent two emails saying they had conteacted apple it was not unlocked so plkug it in to itunes and it would say unlocked - it didnt unlock so I asked in the apple store who said to try to restore it which i did but now thw phone wont activate -it sats no sim and even though i went and got a new tesco sim it is stillsaying no sim and wont activate
all help appreciatedWas this officially unlocked legally by the phone carrier that the phone was locked to?
If not it sounds like the phone was hacked to unlocked and when you updated the phone it locked backed up again. -
i dont know what to do
Did you delete the files from your computer?
BTW, you've posted in the iTunes Match forum. Is your question related to that service? -
i have tried to install new update on iphone 5 and now it wont turn on when i plug it in the charger it just shows i need to connect to itunes.
Given the state your device is in you have already erased your old stuff. You have an image on the screen that says, "Connect to iTunes." That's what the image means. So you will need iTunes on your computer.
Upgrading iOS
1. How to update your iPhone, iPad, or iPod Touch
2. iPhone Support
3. iPod Touch Support
4. iPad Support
a. Updating Your iOS from iOS 5 or Later
Tap Settings > General > Software Update
If an update is available there will be an active Update button. If you are current,
then you will see a gray screen with a message saying your are up to date.
b. Resolving update problems
1. iOS - Unable to update or restore
2. iOS- Resolving update and restore alert messages -
I was installing the ios 6 on my iphone 3GS and an error occured and since then it's hanged up and not working. Please suggest some solution
the same thing here! each time its suppose to register with my network, it cant. im wondering if its a hardware problem
-
Hello. I updated my iPhone 4S to ios 7.1.1. And now it shows "no SIM card". This never happened before. How can I downgrade?
Hey User13579,
Thanks for using Apple Support Communities.
Follow these steps to attempt to resolve the issue.
iPhone: Troubleshooting No SIM
http://support.apple.com/kb/TS4148
Toggle Airplane mode On and Off.
Try turning iPhone off and then on again.
Check for a carrier settings update. Tap Settings > General > About. If an update is available, a prompt will appear.
Remove the SIM Card and verify that it is a valid, carrier-manufactured SIM. Also verify that it is not damaged, worn, or modified. Then reinsert it.
Restore the iPhone.
Have a nice day,
Mario -
It is a 64 GB Iphone 5s and I am running Windows 7 x64 on all of my pcs.
I just got an iphone 5s and now it wont connect to any of my windows 7 PCs, it just gets detected as an unknown device and is unable to be detected correctly. It was connected to one windows 7 pc about a week ago and worked but now I tested it on 4 other computers including a macbook running osx and it isnt detected. I tried the whole Apple Guide and it was no help.install the latest version of itunes
-
Hello my iphone was buy in Apple store as neverlocked i was using for one year but yesterday i was restoring my iphone and now it says ``INVALID SIM CARD CAREER`` please help
Hi there DJCanndy,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPhone: Troubleshooting No SIM
http://support.apple.com/kb/TS4148
-Griff W. -
Please i need help i updated my iphone 3gs and now its not activating
i need help i updated my iphone 3gs and now its not activating
What happens when you try to activate the iPhone?
If there is an error message, what is the exact wording of that message? -
i just updated the facebook app for my ipod touch and now it wont open and i tried restarting the ipod and also re downloading the app several times and nothing.. any help? thanks!
jflight007 wrote:
but some of my music was no purchased from itunes so that will all be lost though right?
ALL of your music should be on your computer in itunes. Is it not?
How did it get on your ipod in the first place if not from your comptuer?
Everything on your ipod should be on your computer and you should be syncing regularly. -
Just synced my iphone 3GS and now many of my app's won't open on my phone. This was with version 4.3.2. I tried a reboot on my iphone but that didn't help. Any ideas?
this happened to me with my iPhone 4. I researched the problem and found this :
"The reason this happens is because every time a downloaded app is opened it checks for your itunes password for validation that you are authorized to open that app (as it may contain personal info). From time to time the iphone 'forgets' your itunes password. You can fix the missing password by syncing the iphone with itunes or downloading an app from the app store and entering your password that way.”
And to fix it, all I did was download a new app, or delete a current one, I used Facebook, and re-download it.
Hope this helps -
what causes iphone 3gs every time I insert the SIM card does not show the screen or no service?
If the iPhone was unlocked unofficially, it has been locked to original carrier again.
-
I have a verizon iphone 5c and I took out the SIM card just being curious and put it back in, now I can only use my phone on wifi and I can't use 4G or LTE strictly wifi. How can I fix this?
Have you tried resetting your device by pressing and holding the Home button and power button until the silver apple appears? If that doesn't work, try resetting the network settings. Settings>General>Reset>Reset Network Settings.
If that fails, you may possibly have damaged the SIM. Verizon will need to give you a new one.
Best of luck. -
I backed up my iphone 3 in preparation for moving to iphone 4S and before i changed the sim card I discovered my notes had been wiped! It looks like this is quite common but can anyone tell me where the notes I backed up on itunes would be???
In the iPhone backup. Right click on the phone in iTunes and choose "Restore from Backup".
Maybe you are looking for
-
SSF_OPEN and SSF_CLOSE
I am calling several smart forms between SSF_OPEN and SSF_CLOSE function module. Problem is that for each call one PDF document getting create in FileNet archiving sytems. We would like to have only one single PDF document to be create containing out
-
Header in 'gui_download'
Hi All, I use 'GUI_DOWNLOAD' to download data from internal table to excel.I am passing the heading in the header field of function module. call FUNCTION 'GUI_DOWNLOAD' EXPORTING FILENAME = lv_file FILETYPE =
-
How can I restrain the user login portal once, in the same time ???
Hi I need to restrain the user can't repeat to login portal .... to reduce portal loading How can I restrain the user login portal once, in the same time??? Which attributs in Identity Manager or amconsole I can do it to restrain the user ?? tks
-
I want to buy IPhone 4 unlocked factory from USA, but I am not sure its work with TCI Network in Iran. So could you please follow me about this question? Please tell me which version is compatible with our network. Thanks
-
I have a wireless router WRT54G and Im trying to set a password for my network. But when i type 192.168.1.1 or 192.168.1.245 to the addressfield, the Internet Explorer just says that the page cannot display. How can I set the password to the network