Waste Disposal Service in SAP SD

All,
We have a waste disposal scenario where the waste is collected from the customer and an invoice is raised for performing the disposal. This would have been a standard service scenario if not for the waste. The waste should be received into the warehouse and tracked as other standard products. Can this be done in SAP ECC? (initial idea was to create a returns order and a returns delivery to get the waste in but can we create a credit memo request in a returns cycle?)
Thanks & Regards,
KC

Hi,
If you take it through return then it will create return delivery and credit note(it means you have to pay/give money) here you scenario is quite different
You have to take waste and raise invoice to customer
Process it through MM and SD
MM Process -
Create material waste
Goods receipt without P.O (Only update quantity not value)
SD PROCESS
Create sales order for Waste put GR document number as reference P.O (material west in sales order not relevent for delivery so switch of availability check and or no scheduline in order)
Create invoice with reference to order
Kapil

Similar Messages

Waste Disposer as Vendor

Dear all
Can we define Waste Disposer and Waste Transported of Waste Management module of SAP EHS as Vendor in MM. If yes, what will be the process?
Thanks in anticipation
Vikram Sethi

Dear Vikarm
You can use Integration option in Waste Disposer, where you can link Company Code, Plant, Storage Loc, Vendor and Customer. For this you create vendor master and integrate the same using WATREE transaction.
Thanks and Regards
Jayakumar

EHS - Waste management - service PO related

Hello All,
I'm having a client requirement in Waste management that instead of standard PO , is it possible to service PO to be created automatically which results service entry sheet and there by invoice and billing to vendor. I checked from the standard flow standard PO is possible. If I want to get services PO from the entry documents screen in wae02 transaction. where I can enter the service details in entry document screen ? is it possible to get auto generation of service PO and what is relevant configuration to be done in Waste management ?
Regards
kiran.

hi sashi,
after creating p.o in wae02, create waste disposal document in wam02 and clear inventory in wae02.
Then go back to wam02 and select the particular waste disp. document and set the appropriate dates details in different tabs and change the status to archive.
Reward if it is useful ...
Regards,
Ram

RFC connection from SAP Data services to SAP ECC

We have data services set up in linux machine. I am trying to set up RFC connection between data services and SAP ECC.
From data management console after creating RFC connection i am getting "RFC_bad_connection" error message. Username , password, system number, hostname and client is working from SAP GUI and has all the authorizations. SAP gateway and service is name is correct.
Did anyone had similar issue and what was the solution. Do we have start the RFC connection from linux data services machine, i didn't see any sh executable to do so.
Thanks in advance for helping to solve the RFC connection issue.
Edited by: gupta sasha az on Dec 19, 2011 7:24 PM

I am new to SAP and we have just started work on Data Services.
I wanted to know the complete procedure as in how can I establish a connection between Data Services and ECC.
Thanks for your help and time.

INVOKING WEB SERVICE FROM SAP ERP

Hi to all
I need interchange informacion between NON-SAP system and SAP ERP using web services
I know publish web services in SAP ERP, but I don't know how SAP consume a WS of other system
Please, somebody know how can I do it this ? I don't want that XI consume this WS, I want that SAP ERP consume it.
Thank you and regards
Dario

Hi,
we can do it using Webdynpro for Java or ABAP. In addtiion to this check wtih any EDI related ones or ALE-IDOCS.
Psl check this abt the Web Services information-
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/109aa318-5aa6-2a10-799d-a495383c1e01
Reward if helpful.
Best Wishes,
Chandralekha

Calling Web Service from SAP

Dear All,
How can we call web service from SAP?
Thanks in Advance,
Ramana

HI kcr,
pls see this link
http://****************/Tutorials/Others/ValidateEmailID/Webservice.htm
write this program
REPORT zvalidate_email.PARAMETERS: p_mail(100) LOWER CASE.                 " E-Mail id to be verifiedDATA: http_client TYPE REF TO if_http_client .DATA: w_string TYPE string ,
      w_result TYPE string ,
      r_str    TYPE string .DATA: result_tab TYPE TABLE OF string.START-OF-SELECTION .
CLEAR w_string .
CONCATENATE
'http://www.webservicex.net/ValidateEmail.asmx/IsValidEmail?Email=' p_mail
INTO
w_string . CALL METHOD cl_http_client=>create_by_url
    EXPORTING
      url                = w_string
    IMPORTING
      client             = http_client
    EXCEPTIONS
      argument_not_found = 1
      plugin_not_active = 2
      internal_error     = 3
      OTHERS             = 4. CALL METHOD http_client->send
    EXCEPTIONS
      http_communication_failure = 1
      http_invalid_state         = 2. CALL METHOD http_client->receive
    EXCEPTIONS
      http_communication_failure = 1
      http_invalid_state         = 2
      http_processing_failed     = 3.
CLEAR w_result .
w_result = http_client->response->get_cdata( ). REFRESH result_tab .
SPLIT w_result AT cl_abap_char_utilities=>cr_lf INTO TABLE result_tab . READ TABLE result_tab INTO r_str INDEX 2.
IF r_str+44(1) = 't'.
    WRITE:/ 'Valid email address'.
ELSE.
    WRITE:/ 'Invalid email address'.
ENDIF.Output:
thanks
karthik

Failed to start dependent service com.sap.portal.usermapping

Hi
I am trying to retrieve the User mapping information from my Webdynpro application. I added PORTAL:sap.com/com.sap.portal.usermapping to my service references in the web dynpro application. However, I am getting an error while deploying the application. The error message says
Failed to start dependent service ''com.sap.portal.usermapping'' of application ''local/materialtemplateapp''. Status of dependent component: STATUS_MISSING. Hint: Is the component deployed correctly on the engine?
I know this is a pretty old problem that many other Web Dynpro developers encountered. I searched a lot on the forums and SDN. There are similar posts but I didn't find solution. I would appreciate any help in fixing this problem.
Thanks

Hi,
Goto http://<servername>:<port>/webdynpro/welcome-->content Adminsitration
Now, expand sap.com and search for the usermapping service. Check what is the status of that particular service. If its in the stopped state then start it and try redeploying your application.
Regards,
Murtuza

Error when creatibg a web service in SAP r/3 ecc 5, WebAS 640

We are trying to expose a BAPI (BAPI_CUSTOMER_GETSALESAREAS) as a web service on SAP R/3 ECC 5. web AS 640.
We created the virtual interface (Z_VI_CUSTOMER_BAPI)and the web service definition (Z_WSD_CUSTOMER_BAPI)from SE80. When we try to release the web service definition from WSCONFIG, we get an error saying:
"Error when creating web service(Web Service Definition Z_WSD_CUSTOMER_BAPI for SOAP application unbekannt)"
Please help...
Thanks,
Shailesh

Hi.
I think I must clarify my question.
The Web Service is not called inside SAP R/3 but externally. For testing pourpose I actually use WS Navigator and XMLSpy.
The method inside ABAP Server Proxy which is exposed as a Web Server in SAP R/3 system is the following. Note that the Web Service is Asynchronous.
METHOD zpi_ii_test_ws_4_in~test_ws_4_in.
DATA: lwa_zpi_test TYPE zpi_test.
lwa_zpi_test-mandt = input-mt_test-record-client.
lwa_zpi_test-bukrs = input-mt_test-record-company.
lwa_zpi_test-belnr = input-mt_test-record-document.
lwa_zpi_test-gjahr = input-mt_test-record-year.
INSERT zpi_test FROM lwa_zpi_test.
COMMIT WORK.
ENDMETHOD.
I have created another Web Service in SAP R/3 which is Synchronous, and the error does not occurs. The following is the method inside ABAP Server Proxy which is exposed as a Web Service in SAP R/3 system.
METHOD zpi_ii_test_ws_3_in~test_ws_3_in.
DATA: l_bukrs      TYPE bukrs,
        l_belnr      TYPE belnr_d,
        l_gjahr      TYPE gjahr,
        lr_belnr     TYPE RANGE OF belnr_d,
        lwa_zpi_test TYPE zpi_test.
l_bukrs = input-mt_req-msg+0(4).
l_gjahr = input-mt_req-msg+4(4).
SELECT MAX( belnr ) INTO l_belnr
    FROM zpi_test
    WHERE bukrs EQ l_bukrs
      AND belnr IN lr_belnr
      AND gjahr EQ l_gjahr.
IF l_belnr IS INITIAL.
    l_belnr = '4700000000'.
ELSE.
    l_belnr = l_belnr + 1.
ENDIF.
lwa_zpi_test-mandt = sy-mandt.
lwa_zpi_test-bukrs = l_bukrs.
lwa_zpi_test-belnr = l_belnr.
lwa_zpi_test-gjahr = l_gjahr.
INSERT zpi_test FROM lwa_zpi_test.
COMMIT WORK.
output-mt_resp-msg = l_belnr.
ENDMETHOD.
I hope to have clarified my question.
Rafael Rojas.

Web-dynpro application -ERROR: ICF service node "/sap/bc/webdynpro/sap/zqm_cto_arr_general1" does not exist (see SAP Note 1109215) (termination: ERROR_MESSAGE_STATE)

i have created my web-dynpro application in development. and sent to quality . whenever i will execute my dynpro in quality i got one message
ERROR: ICF service node "/sap/bc/webdynpro/sap/zqm_cto_arr_general1" does not exist (see SAP Note 1109215) (termination: ERROR_MESSAGE_STATE)
whenever i saw sicf transaction my web-dynpro is not seen . my dynpro application name is more then 15 character. what i will do . please give me valuable suggestion.....

Hi Ashok,
for your requirement the application is not exist in particular place. It means, the webdynpro application is saved at different package or different location.
Please change the webdynpro component name and save it in particular request in package, then transport it to quality ..(development server )
then go to SICF t.code .. sap->bc->webdynpro->sap->find out your application and activate the service of your webdynpro application.
Now test it ... this solution might helpful to you .
Regards,
Naveen M

Error when consuming Web Service in SAP R/3 ECC 6.0

Hi to everyone.
I have created an asynchronous Web Service in SAP R3, which I want to use in SAP PI later.
When I test the Web Service using WS Navigator or XMLSpy the following error occurs:
SOAP Runtime Protocol: ABAP Runtime exception: 1F09B73915F6B645E10000000A11447B occurred in program CL_SOAP_APPLICATION_PROXY=====CP CP in include CL_SOAP APPLICATIONPROXY=====CM008 at position 110
SOAP Runtime Protocol: Exception message: An exception with the type CX_SY_REF_IS_INITIAL occurred, but was neither handled locally, nor declared in a RAISING clause
I tested another synchronous Web Service developed by me in the same system, and the error does not occurs.
I just searched an OSS Note and does not find anything.
There are some restrictions in Web Service type developed in SAP R/3?
Thanks in advance.
Rafael Rojas.

Hi.
I think I must clarify my question.
The Web Service is not called inside SAP R/3 but externally. For testing pourpose I actually use WS Navigator and XMLSpy.
The method inside ABAP Server Proxy which is exposed as a Web Server in SAP R/3 system is the following. Note that the Web Service is Asynchronous.
METHOD zpi_ii_test_ws_4_in~test_ws_4_in.
DATA: lwa_zpi_test TYPE zpi_test.
lwa_zpi_test-mandt = input-mt_test-record-client.
lwa_zpi_test-bukrs = input-mt_test-record-company.
lwa_zpi_test-belnr = input-mt_test-record-document.
lwa_zpi_test-gjahr = input-mt_test-record-year.
INSERT zpi_test FROM lwa_zpi_test.
COMMIT WORK.
ENDMETHOD.
I have created another Web Service in SAP R/3 which is Synchronous, and the error does not occurs. The following is the method inside ABAP Server Proxy which is exposed as a Web Service in SAP R/3 system.
METHOD zpi_ii_test_ws_3_in~test_ws_3_in.
DATA: l_bukrs      TYPE bukrs,
        l_belnr      TYPE belnr_d,
        l_gjahr      TYPE gjahr,
        lr_belnr     TYPE RANGE OF belnr_d,
        lwa_zpi_test TYPE zpi_test.
l_bukrs = input-mt_req-msg+0(4).
l_gjahr = input-mt_req-msg+4(4).
SELECT MAX( belnr ) INTO l_belnr
    FROM zpi_test
    WHERE bukrs EQ l_bukrs
      AND belnr IN lr_belnr
      AND gjahr EQ l_gjahr.
IF l_belnr IS INITIAL.
    l_belnr = '4700000000'.
ELSE.
    l_belnr = l_belnr + 1.
ENDIF.
lwa_zpi_test-mandt = sy-mandt.
lwa_zpi_test-bukrs = l_bukrs.
lwa_zpi_test-belnr = l_belnr.
lwa_zpi_test-gjahr = l_gjahr.
INSERT zpi_test FROM lwa_zpi_test.
COMMIT WORK.
output-mt_resp-msg = l_belnr.
ENDMETHOD.
I hope to have clarified my question.
Rafael Rojas.

What are the avlble methods to Measure Quality of Customer Service in SAP

Hi
We are in Retail business, and I would like to know what are the available methods to measure the Quality of Customer service in SAP CRM. Help us to get the required information?
Best regards

Venkat,
there are two aspects to this :
1. The overall philosophy ( for want of a better word ) of QOS for any service - there is a lot of thought that has gone into measuring QOS for a service - hence I would say that QOS is more related to the specific service than the entire domain.
2. Measuring the quality of service in terms of what ? - there are a lot of KPIs for the same some of them could be :
Average time taken to service a customer
Does the customer get all that they want in the store or only some of the items ( partial fill)
Are the products neatly arranged and easy to access
average time taken for the customer to get what h/she needs
customer facilities like parking / childern play area etc
Availability of attendants / helpers for the customer
home delivery
credit options... etc etc and the list could go on endlessly ... as you can see it is very specific to the service being provided and accordingly you will get KPIs for the same.
As for measauring the same - there are umpteen ways to do the samedepending on the place it gets recorded - you can have surveys / web surveys / POS details etc etc - what is it that you are looking for specifically ?
Arun
Hope it helps....
Message was edited by:
Arun Varadarajan

How to publish a SAP Web Service in SAP XI/PI 7.0

Hi,
First I've to say that I'n new in this deals with SAP Web Services and SAP XI/PI.
I've created a Web Service with TX SE80 using a standard BAPI.
I've created the Client Proxy with TX SE80.
I've created a Logical Port wiht TX LPCONFIG.
I've tried this is SOAMANAGER but I have this error...
"SRT Framework exception: Uninstantiated object "subject sidl service" in method IF_SRT_WSP_CONFIG_SIDL~CREATE_CLNT_CFG_FROM_WSDL_D of class CL_SRT_WSP_CONFIG_SIDL"
I would like to publish this service in my SAP XI/PI 7.0
How can I solve the error in SOAMANAGER?
How can I publish de SAP WS that I've created in SAP XI/PI?
Thanks a lot.
Waiting for your news.
Fernando.

Hi Dimitri,
I had the same problem:
"SRT Framework exception: Uninstantiated object "subject sidl service" in method IF_SRT_WSP_CONFIG_SIDL~CREATE_CLNT_CFG_FROM_WSDL_D of class CL_SRT_WSP_CONFIG_SIDL"
And by following Nags hints I got solution:
1, On the system where is your service provider, run transaction SICF
2, Execute this transaction
3, Go to node: default_host/sap/bc/srt/wsil
4, Right click on "wsil" -> choose "Test service" - web browser should open with XML definition of service
5, Find your service provider. In my case it looks like this:
<service>
<name>ZTEST_WS</name>
u2212
<wsdlNamespace>
urn:sap-com:document:sap:soap:functions:mc-style/service
</wsdlNamespace>
<wsdlName>service</wsdlName>
u2212
<wsdl>
http://xxx.yyy.com:8000/sap/bc/srt/wsdl/srvc_DF838C999AA282F18829001CC4D74176/wsdl11/service/ws_policy/document?sap-client=800
</wsdl>
</service>
5, Look for WSDL link -> in my case:
http://xxx.yyy.com:8000/sap/bc/srt/wsdl/srvc_DF838C999AA282F18829001CC4D74176/wsdl11/service/ws_policy/document?sap-client=800
I dont know why, but this link is different like WSDL link in service definition which I can see in SE80:
http://xxx.yyy.com:8000/sap/bc/srt/wsdl/sdef_ZTEST_WS/wsdl11/ws_policy/document?sap-client=800
6, Use this link (from "wsil") instead of link from SE80 in SOAMANAGER to create logical port
7, Yours logicall port should be created without errors.
My question - have anybody idea, why this links are different and why only that second one works?
Peter

How to create WEB SERVICE in SAP

Hi guys ,
i am new to WEB SERVICE IN ABAP.what's the purpose of web service ?
can anyone give me step by step example to create web service in SAP?
ur answers will be rewarded.
Regards
pabitra

Check the below links.
Web Services-Based Connectivity
Providing and Consuming Web Services in ABAP
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30f1b585-0a01-0010-3d96-ad0ea291c4f9
Web Services Development in ABAP
Web Services-Based Connectivity?rid=/webcontent/uuid/83b7ec4d-0a01-0010-03a9-e5a3b42522b8 [original link is broken]
Web Services (SAP Library - Web Services)
http://help.sap.com/saphelp_nw04/helpdata/en/9b/dad1ae3908ee44a5caf57e10918be9/content.htm
ABAP Proxy Runtime (SAP Library - Web Services)
http://help.sap.com/saphelp_nw04/helpdata/en/02/265c3cf311070ae10000000a114084/content.htm
Hope this helps.
Thanks,
Balaji

Services in SAP management console and related window services and process

hai
can u please any one of you can send me the services in SAP management console and related window services(in adminstrator/services) and process in task manager.
thanks in advance.
Naga Laxmi

Hi Naga,
Please refer to this article for the processes relevant to the Java Instance:
http://help.sap.com/saphelp_nw04/helpdata/en/62/1bf03eae11e16be10000000a114084/frameset.htm
Except the processes of the Java instance you can find several processes of the IGS server and the ABAP disp+work processes.
You can easily find the relevant services by their SAP prefix.
Hope this helps.
Best Regards
Vyara

Is it possible to create WEB SERVICE in SAP 4.7

Hi guys,
is it possible to create WEB SERVICE in SAP 4.7 ?
i want to make a FM as web service enabled.
plz advice.
Regards
pabi

Hi,
The definitive (and in my experience only) documentation on this is at;
http://help.sap.com/saphelp_47x200/helpdata/en/94/f8c8a2e68811d6b2dc00508b5d5211/frameset.htm
This same information is available combinded as a single pdf, but I can't find this.
Regards,
Nick

Waste Disposal Service in SAP SD

Similar Messages

Maybe you are looking for