Wat is the best solution when I get DLL file is missing ,is that SFC to run or system restore?

hi,
wat is the best solution if I get an error some dll file is missing , is that SFC utility to run or sytem restore or some other solution?
thanks
johan
h.david

then it's fine to perform a system restore, but it will revert some changes you have made on your system.
and detailed infoemation would be helpful.
Regards
Yolanda
TechNet Community Support
Most error messages relating to missing .dll files are due to virus scanners. The scanner removes the threat (the .dll file) but leaves the program behind that tries to invoke the .dll file. Your recipe of using System Restore to fix the problem could well
backfire: It might restore the infected .dll file! This is why it is important to know the full wording of the error message. If the missing file resided in the System32 folder then it's probably OK to restore it. If it resided elsewhere then restoration would
probably be a bad idea.

Similar Messages

SQL Server 2012 - Wat Is The Best Solution For Creating a Read Only Replicated/AlwaysOn Database

Hi there I was wondering if someone may have a best recommendation for the following requirement I have with regards setting up a third database server for reporting?
Current Setup
SQL Server 2012 Enterprise setup at two sites (Site A & Site B).
Configured to use AlwaysOn Availability groups for HA and DR.
Installed on Windows 2012 Servers.
This is all working and failover works fine and no issues. So…
Requirement
A third server needs to be added for the purpose of reporting, to be located on another site (Site C) possibly in another domain. This server needs to have a replicated read only copy of the live database from site A or Site B, whichever is in use. The Site
C reporting database should be as up-to-date to the Site A or Site B database as possible – preferably within a few seconds anyway….
Solution - What I believe are available to me
I believe I can use AlwaysOn and create a ReadOnly replica for the Site C. If so do I assume Site C needs to have the Enterprise version of SQL server i.e. to match Site A & Site B?
Using log shipping which if I am correct means the Site C does not need to be an Enterprise version.
Any help on the best solution for this would be greatly appreciated.
Thanks, Steve

for always on - all nodes should be part of one windows cluster..if there site C is on different domain - I do not think it works.
Logshipping works --as long as the sql on site C is is same or higher version(sql 2012 or above). you can only do read only.
IMHo, if you can make site C in the same domain then, Always is better solution else log shipping
also, if your database has enterprise level features such as - partitonin, data compression -- you cannot restore the database on lower editions- so you need to have enterprise edition.
Hope it Helps!!

The best practice when backing up your files

Hi,
I recently started using Carbon Copy Cloner after using only Time Machine as my back up solution. I do understand the purpose of each application TM and a cloner utility such as Super Duper or CCC but I was wondering what the best process is when using these two methods to backup you files.
For instance I use TM to back up my files as frequently as possible to keep all my recent changes updated, but I don’t see how I would keep my clone updated and make sure that when something happens I will have a workable boot disk and not something that contains corrupted files. In other words I think these cloner utilities have some sort of feature to keep your clone drive updated every time something changes but this got me wondering what if you update your clone drive and for some reason one of the updated file was corrupted, without you knowing it if course, now you have a backup that contains bad files and may affect your system (corrupted fonts files etc.) and when you realized that something is not working right in your system you may want to recover from your clone but you will basically end up with the same problem because the bad files were also backed up.
How do you ensure that your clone will always be ready and that it will not contain bad files?
What is your backup process? Be so kind and share your method.
Again, I’m ok with TM I just need to know how you guys are managing your clone drives using ether Super Duper or Carbon Copy Cloner.
Thanks a lot!

I use CCC exclusively and update my clones every couple of days or after installing updates. I have no use for TM, since I've never had to go back and get something I deleted or changed. I do, however, boot into those clones on a routine basis to ensure that they look and act like the originals. This has worked for over seven years, but YMMV.

What is the best solution when dealing with user settings

We have a webapp, when a user logs in, all the user en application settings are read (only once) from the database and stored in a session bean (for quick access).
But when some application setting is changed, I want to tell all the session beans that they need to reload the settings.
Is there a good solution for this?
Thanks in advance.

There are several ways to do this:
1) Put a timestamp on the application settings tables whenever they are changed. At the beginning of each request, send a small query just for this timestamp and compare it to a timestamp for when the session was created. If it is newer then the session then force a full refresh of the session data, otherwise keep using pre-loaded session data. This keeps normal operation quick since the SQL needed for the intial test is simple and quick, but will get the user the new information they need when they need it.
2) Collect your sessions into an external collection stored inside application scope. Have a trigger that when the application settings change, the session objects are iterated through and updated. This way the settings may be updated without the user making a request - and the updates may be time-invisible to the user. But you could get into situations where you are updating settings at the same time you are reading settings, so you will need to synchronize your access.
3) Don't put application settings in the session. The session should be for user settings only. The application scope (Servlet Context) should be used to store the application settings. As such, when application level changes to the DB are made, the application-level object is reloaded. You only have one copy in memory, it updates just once, no need to iterate through sessions, and users who use the application settings are using the most recent copy.

Dll file is missing on installing the app-v 5.0 sequenced application

HI All,
I have sequenced a application using AppV 5.0 Sequencer. During sequencing the application is fine, I gave the PVAD as C:\Program Files (x86).
After installation of the sequenced application, on launching the shorcut it throws error that
"The program cannot start because PBVM100.dll file is missing from your computer. Try re-installing the application".
I searched for that dll file, the weird thing is the dll file is present in the ProgramFiles(x86), but still i dont why the application was throwing such an error.
If I install the source it is fine, but if I install the sequenced application it throws error.
I even tried connection groups through SCCM 2012, it is still throwing the same error.
I am out of ideas. Can anyone help me on this issue.
Thanks in advance.

Hello Cody. I created a sequenced
Actuate 7 eSpreadsheet Designer 10.0.2 with Appv-5 Sp2. I published the package using the Powershell commands, but When I tested the app in this test machine the app never openned. The process eSpreadSheet.exe cosumed the 99% of the CPU and never
open the app. I performed a Devirtualization in another machine and it looks work properly, So I think it's a virtualization problem. Do you have any idea how to fix this?
Note: I created another sequence including all the DLLS detected in SystemX86 in the same directory where the exe file resides for this application C:\Program Files\Actuate7 as you suggested in the last entry but I'm still having the same problem.

I have problems in the initiation of the Encore process when opening presents the following error message : "Encore CS6 Cannot Run in Non-Royalty Serialized".... What is the best solution for this problem ?

Help Me.
What is the best solution for this problem ?

Encore is activated when you activate Premiere Pro... so, as Stan asked, how did you install P-Pro?
Ask for serial number http://forums.adobe.com/thread/1234635 has a FAQ link
-and a fix for Encore http://forums.adobe.com/thread/1421765?tstart=0 in reply #7
-plus more Encore http://helpx.adobe.com/encore/kb/cant-write-image-fie-larger1.html

Help I have a Macbook 2006 model and I like to play videogames on it, well when I leave it plugged in it gets the best performance, when its not plugged in its decent, so will it hurt my battery if I leave it plugged in at all times?

Help I have a Macbook 2006 model and I like to play videogames on it, well when I leave it plugged in it gets the best performance, when its not plugged in its decent, so will it hurt my battery if I leave it plugged in at all times?

No, it will hurt your battery, but it is not recommended by Apple. Additionally, since you have a model with a removable battery, you should calibrate the battery once a month if you leave it plugged in at all times.
Apple Portables: Calibrating your computer's battery for best ...
www.apple.com/batteries

The best solution? Hub-and-spoke, Peer-to-peer, Multi-cast?

By the best solution, I mean in terms of price and quality (latency, minimum lag, etc)
App type: Video conferencing
Platforms: PC, Mobile (Android, iOS) [If mobile support would reduce performance or increase costs, I am willing to scrap it]
Users: There will be 5 - 30 users logged into the service in the same room at a time. And a maximum of 5 - 7 users in that room will have their webcam's on at any given time.
My main concern is performance, Since I might make it a paid service in the future, I don't think users would pay for something that has a lot of lag or trailing effects.
So I was hoping to get some advice on how I should set it up and pros and cons in respect to LCCS

Hi Sam,
Let me add my two cents here, when speaking about MAN deployments the name of the game is MPLS, so I guess you are using the same on your Cat 6500s and connecting your customers on 3550s using Vlans.
Regarding your questions:
a) Upgrading Ethernet to L3 for traffic shaping: This is basically done at 3550, so I suppose that's what you intend to do, plus you will be letting Spokes talk to only Hub site, so inter Vlan, atleast between Hub and each spoke will be required, hence inter valn routing. Other way is to configure P2P circuits between Hub site with Vlan mapping (per spoke) and Spoke sites with Port mapping, in this scenario Inter Vlan routing is not a necessity.
b) Security: This depends on what exact architecure you have deployed, in my case I have simply installed a Gateway router with BGP peering with PEs, a separate VRF alongwith redistribution does the trick.
Hope I addresses the query correctly, let me know if that helped..
Cheers
~sultan

Traffic shaping: Which is the best solution?

Hi! I'm running 3 computers on 1 d-link router, 2 of them has an archlinux installed. Wondershaper mostly works for me when the other computers has cfosspeed running on windows, but when both computers run archlinux and wshaper and p2p applications, ping is over 1000ms instead of 10-20ms.
Which is the best solution of traffic shaping on linux, and is there a howto for them (can be even a gentoo wiki page or similar)?
Edit: shorewall is not being built from yaourt (x86_64), can't find a usable manual for trickle and niceshaper, (even ubuntu forums has unreplied "threads" about it) and can't start them coz missing config files, it seems, noone cares about ACK priority and ping in the Linux world
Last edited by Vegita (2010-02-24 19:58:07)

This config file is being used on 2 computers, and not working, my speed is 8m/1m. Any ideas? I don't want to limit anything, I just want ACK's priority to set to the highest, and same with http, and get p2p apps (opn this computer ktorrent and valknut, on the other ktorrent) priority on lowest. valknut's port is 1412, ktorrents' one is 6881 on this and 24748 on the other computer. Any ideas what to modify for small ping?
# shaping config script for pyshaper
# for more information about pyshaper configuration, refer to the
# file 'pyshaper.conf.readme', and the examples therein
# set the connection-scanning period to 15 seconds (which is very
# aggressive). IF you're more concerned about longer-running
# connections, set this to a longer value (say, 60-300 seconds).
period 30
# declare one network interface, and set its inbound
# and outbound bandwidth in kbits/sec
eth0.ip 192.168.0.180
eth0.in 8096
eth0.out 1024
# This is a test scenario - we're throttling all replies
# from our webserver to max 16kbits/sec, but only if
# the remote client is shell.sourceforge.net
# note - the identifiers 'out', 'pri', 'rate', 'ceil' 'http' and 'test'
# have special meaning (see pyshaper.conf.readme).
# the identifier 'http' is not significant - you can replace
# it with anything, as long as your setup is consistent
# we're setting up a basic 'class' called 'http'
eth0.http.pri 1
eth0.http.out.rate 968
eth0.http.out.ceil 1024
eth0.http.test raddr=='66.35.250.208' and lport == 80
eth0.p2p.test (cmd == '/usr/bin/valknut')
eth0.p2p.test (cmd == '/usr/bin/ktorrent')
eth0.p2p.pri 3
# default traffic gets good bandwidth
eth0.default.out.rate 932
eth0.default.out.ceil 968

The BEST solution for gmail on the iPhone

OK, so after much poking around, I finally figured out the best solution for using gmail on the iPhone: IMAP support.
While I think Google is still rolling this out to all users, once you get it, USE IT! It basically keeps your mail app synced with gmail, and even supports the use of folders/labels.
To see if your gmail account is ready for IMAP, go to the settings option in gmail and see if one of the tabs says "Forwarding and POP/IMAP." If you don't have IMAP available on your account yet, it won't say IMAP.
Here's some links to get you started:
setting up IMAP for gmail on your iPhone:
https://mail.google.com/support/bin/answer.py?answer=77702
how actions in your mail app sync to gmail:
https://mail.google.com/support/bin/answer.py?answer=77657
I hope this helps out everyone as much as it's helped me. I was a little frustrated before using POP, but gotta love IMAP! I'm not too sure the impact that this has on your battery life, but so far it's working well for me. Enjoy!

Gmail and IMAP have totally change my tune about the iPhone's email abilities. I was getting frustrated with the inability to reliably get mail (Message has not been downloaded...), sync (have to delete mail from both iPhone and desktop Mac), etc., but now I have all my POP email accounts automatically forward to my Gmail account, and I only check Gmail with the iPhone and MacPro. So far, it's a whole new iPhone experience! No more errors - ALL mail comes through perfectly - and no need to manually sync!
Note that, when setting up the Gmail/IMAP accounts, do NOT simply update your old POP Gmail settings on your Mac or iPhone! Start with a FRESH new account. I couldn't get either the iPhone or Mac to work until I started with a fresh account.
Also, I was unable to send mail from the iPhone using the smtp.gmail address, so I had changed the outgoing mail setting to use my regular ISP's smtp address. But, at some point (a few minutes later or a few hours, I don't know) when I checked the Gmail settings on the iPhone, it had magically changed itself to smtp.gmail, with the port number, and it has been working perfectly ever since! Maybe IMAP can atomatically correct this info? Not sure.
One more thing. Once you have Gmail IMAP working, then you MUST go here:
http://5thirtyone.com/archives/862
Follow these directions exactly. This is a necessary set of steps in order to make your iPhone and Mac sync correctly, so that trashed mail on the iPhone will go in the trash on your desktop Mac, etc. It's pretty freaky to check email on the iPhone, and then go to your Mac Mail a few minutes later, and see all the newly trashed (or saved/read) emails perfectly synched up!
A final note. Once this is all working and synching, remember that if you delete an email on your iPhone, it gets deleted on the desktop Mac Mail as well (and vice-versa)... which is exactly what you want to happen, but I find that I have to remember to keep the mail that I want to save on the iPhone's inbox until I get back to my desktop Mac. Otherwise, I have to manually remove it from the trash to save it!

What do i need to connect my mac book pro to the tv with the thunderbolt on the mac to hdmi? I have the newest macbook pro. I'm wanting to have the best picture I can get from my 1080p tv. thanks

what do i need to connect my mac book pro to the tv with the mac's thunderbolt port to hdmi? I have the newest macbook pro. I'm wanting to have the best picture I can get from my 1080p tv. thanks

Thanks Community! I solved the problem. In fact it was not a problem but lack of understanding. These guys at Apple are way ahead in thir thinking. I will try to explain as short as I can.
In Lion, ihe Prefferences/Display show only two choices: 6-7 steps of resolution and some color tab. No two screens, no two display to overlap, nothing for us to do. "That was the problem"! Everything is automatic.
When I connected the HDMI cable to the Miniport into a T-bolt slot, the TV screen showed the "spiral galaxy" how Zyriab is calling it. In fact he gave me the best clue. That shows the connection is good. But where is the Mac Book image?
You have to drag it to the right out of the Mac Book display area, and "voila!" it will continue on the TV screen. The same with the mouse pointer, push it out ofthe Mac Book display area and you see it on the TV sreen. Good image, you can keep the max resolution, etc. The sound is still on the Book's speakers. I have to figure that out.
Thank everybody, especialy Zyriab, ne was the closest.
High regards to everybody

What is the best solution to this problem?

I have so many solutions in mind right now but i am looking for the best solution if possible. i have the following query
SELECT one_query.date_required as Month_id,
           nvl(one_query.amount_used, 0) as overalluserhours_A,
              nvl(second_query.amount_used_b, 0) as overalluserhours_B,
              nvl((trunc(((second_query.amount_used_b/one_query.amount_used) * 100), 2)), 0) as p_change
from
             (select to_char(b1.needed_date,'YYYY-MM') as date_required,
                SUM(b1.amount_used) as amount_used,
                  b1.type_id as type_id
                    from table_one b1
                     where b1.zone_type like 'NEWYORK%'
                     and b1.type_id = 'CARS'
                    and trunc(b1.needed_date) between to_date('2009-01-01', 'YYYY-MM-DD') and to_date('2009-12-31', 'YYYY-MM-DD')
                          group by to_char(b1.needed_date,'YYYY-MM'), b1.type_id) one_query,
            (select to_char(b2.needed_date, 'YYYY-MM') as date_required,
                            SUM(b2.amount_used) as amount_used_b,
                                   b2.type_id as type_id
                                from table_one b2
                                   where b2.zone_type like
                                   'CHICAGO%'
                              and b2.type_id = 'BIKES'
                               and trunc(b2.needed_date) between to_date('2009-01-01', 'YYYY-MM-DD') and to_date('2009-12-31', 'YYYY-MM-DD')
                             group by to_char(b2.needed_date, 'YYYY-MM'), b2.type_id)second_query
where one_query.date_required = second_query.date_required(+);the above query is being used on table_one. The current problem I am having is based on the fact that table_one might sometimes contain data for only chicago and not for newyork. in this case, table_one would look like this
identification_id         needed_date                   zone_type             type_id
2                             3/22/2006 12:00:00          CHICAGO                BIKES
3                              2/12/2006 12:00:00         CHICAGO                BIKEShowever though, in other case, it could be the other way around. in this case, table_one will look like this
identification_id         needed_date                   zone_type             type_id
4                            4/21/2007 12:00:00          NEWYORK                CARS
5                             1/12/2007 12:00:00         NEWYORK                CARS
and finally table_one could contain information for both cases. hence, we could have the following situation
identification_id         needed_date                   zone_type             type_id
6                            6/21/2008 12:00:00          NEWYORK             BIKES
7                            8/12/2008 12:00:00         CHICAGO               CARSKindly note, my above query is currently being used inside a function. I know I can write so many if statement to handle but the main issue is regarding the fact, i am also using that query in another query which performs so many union all.

I'm not sure how you're going to parameterize it, how those filters change from call to call, but an idea would be something like this:
select date_required month_id,
       max(amt_used_chicago_bikes) overalluserhours_A,
       max(amt_used_newyork_cars) overalluserhours_B,
       (max(amt_used_chicago_bikes) / max(amt_used_newyork_cars)) * 100 p_change
from (select zone_type,
               to_char(b1.needed_date, 'YYYY-MM') as date_required,
               b1.type_id as type_id,
               SUM(case when zone_type like 'CHICAGO%' and type_id = 'BIKES'
                             then b1.amount_used end) as amt_used_chicago_bikes,
               SUM(case when zone_type like 'NEWYORK%' and type_id = 'CARS'
                             then b1.amount_used end) as amt_used_newyork_cars
          from table_one b1
         where trunc(b1.needed_date) between
               to_date('2009-01-01', 'YYYY-MM-DD') and
               to_date('2009-12-31', 'YYYY-MM-DD')
         group by b1.zone_type,
                  to_char(b1.needed_date, 'YYYY-MM'),
                  b1.type_id)
where amt_used_chicago_bikes is not null or amt_used_newyork_cars is not null
group by date_required;Again, this is not the biggest concern regarding performance and certainly not the best way of doing it. Cracking those 250 lines of SQL and making it optimized would probably be the best way to approach the issue here.

[Sales/Shipment report] - What's the best solution?

Hello everybody.
I have to develop a report with some sales data, delivery service data and shipment costs data.
I have the cubes: 0SD_C03, 0SD_C04, 0LES_C02.. and I thought to do a multicube, but I don't no how to link these cubes...
I don't have, for example, Sales Document/Item and/or Delivery Document/Item in all os these cubes...
What is the best solution to this sittuation?
I thought in some solutions like...
1 - Extend extractor of 0LES_C02 to include Sales Doc/Item, but I don't know if all delivery doc is related to a sales doc.
2 - I know I have all the fields that I want in the tables VBAP and LIPS...so I thought in create an generic extractor with a view of these two tables, and than creat a Z cube, to receive these datas...
I really don't know whats the best solution, or if there is abother solution to this....
I'll apreciate ideas, or a solution from someone that already face with this and developed a solution.
Best Regards,
Thiago

Hi,
Its better for you to add sales order,item in the cubes also from the source where your cube gets data ie from DSO as they are only point through which you can combine sales,delivery and billing data.
Thanks,
Arun

After an unsuccessful itunes update i now get an "msvcr80.dll file is missing on my computer message. I tried reinstalling it for the microsoft site and it says it was successful but i still get the error message when i reboot. Any suggestions? Thanks

After an unsuccessful Itunes update I started getting a "msvcr80.dll file is missing from your computer" message. I downloaded and installed the Microsoft Visual C++ file and it said the reinstallation was successful but I still get the same error message and Itunes won"t install or run. Any suggestions? Thanks

Hey colorado65,
Follow the steps in this link to resolve the issue:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
When you uninstall, the items you uninstall and the order in which you do so are particularly important:
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
Let us know if following that article and uninstalling those components in that order helped the situation.
Welcome to Apple Support Communities!
All the best,
Delgadoh

I am considering getting an iphone... Which model is the best for me to get?

I am considering getting an iphone... I do not care about getting the "latest gadget", but have all apple products and would love the convenience of the calendar, music, camera, etc... on my phone. Which model is the best for me to get?
Is it really worth it for the newest (and most expensive) model, or is the 3G sufficient for regular use? or is the 4 now the most basic model I should invest in? or do I really have to get the 4S?

tonefox wrote:
One wonders why you are hanging around Apple forums...
Many have wondered before, even I, yet in the end I settled for a reason... "unbiased help":
iPhone 4S Battery Life: Best solutions and procedures for 1st time user: 1-Do you have a battery life issue (learn first what the usage time spec is about) 2-What can you try to remedy the situation without reading 500 pages of posts

Wat is the best solution when I get DLL file is missing ,is that SFC to run or system restore?

Similar Messages

Maybe you are looking for