Watch Email - Subject header not useful

Is there any way to get the watch notification emails to include the subject of the thread? I don't necessarily want to read all postings but I find I need to open the message to see what the topic is. Here's what I am getting:
From: OTN Forum Administrator <[email protected]>
Subject: OTN Discussion Forum "Solaris 11 Express for SysAdmins" has been updated
Since the From: header already refers to the OTN, I'd say that "OTN Discussion Forum" is redundant.
Also, the forum name doesn't seem as important as the actual topic being discussed. I, for one, would trade the forum name for the topic of the posting.
Am I missing something here ? FWIW, I thought the Sun forum was planning to fix this some time this year.
Thanks,
Jim
Edited by: 799182 on Dec 9, 2010 11:37 AM
Edited by: 799182 on Dec 9, 2010 11:37 AM

I agree, but I bet some people make folders to mirror multiple fora and then make rules to put the mails there automatically.
Since most email clients allow rules by content, that's probably redundant these days, as long as there is a stable forum string in the content.
I'd be happier if there was the ability to sort the online watch screen by date of latest post. My email is not always at a place I can get to, but all I need is a browser to get here.

Similar Messages

If email receiver does not use thurderbird(with enigmail), can my email be traced back or spied by third party? is it meaningless if just me as a sender use thu

if email receiver does not use thurderbird(with enigmail), can my email be traced back or spied by third party? is it meaningless if just me as a sender use thurderbird with enigmail enabled?

Looks like the link you originally clicked was a scam to get you to submit your username and password. I reckon the email from Google was legit (because it did not ask you to enter your username and password, but advised you to change your password.) So it looks like they did actually block a sign-in attempt. Sometimes, scammers do send out emails like this, but they are the ones which ask you to sign in again (because it's those details they are after).
Given that you've changed your password three times you should be safe. The golden rule is never submit usernames and passwords when prompted from an email - it's almost certainly a phishing attempt designed to get hold of your details.

When in email I can not use the delete key to erase a word

When in email I can not use the delete key to erase a word.

Yes, it does. It is only in my email through Charter that it does not work. I restored all keyboard shortcuts to the default, but that did not fix the problem. I have a MacBook Air.
I called Charter also, who said it was a Mac problem.
Thank you.

How to enlarge the text in the "email subject/header plane"

in Thunderbird email, the subject of the email and the email message are in to different planes. No problem enlarging the "message text, words" in the "body" of the email. How to enlarge the "text, font or words" of the "subject" in the subject/header plane? Don't want to open email if I'm not sure of it, and can't be sure of opening emails if I can't SEE the subject of the email. Surely I'm not the only one with this problem.

Thanks! Works great!

I want to switch my emails back to my email provider and not use thunderbird. How do I do this?

I need to be able to access my email on my iPhone. I doesn't seem like this is an option when using thunderbird. Therefore, I need to switch my emails back to my original email provider.
I would like to know how to do that.
Or if you have a solution for checking my thunderbird account via my iPhone, I would be happy to do that. I looked for a thunderbird app for the iPhone but couldn't find one.
thank you

Is your mail account set up as as POP account?
When you set up Thunderbird to access your mail using the POP protocol, it has an option to keep mail on the server for access though other clients or to remove it (either immediately or after a period of time).
''To stop the damage:'' You can change this setting on your account within Thunderbird. In Account Settings (app menu button or classic Tools menu), check Server Settings.
''To restore the removed messages:'' POP is a one-way protocol, so there isn't a way within Thunderbird to upload the mail back to the server without setting up a different kind of connection.
If your mail service allows an IMAP connection, that would create a new set of folders in Thunderbird, and by copying messages into the Inbox in Thunderbird you could sync them back to the server. (Not sure whether the dates will be 100% preserved in the process.)
Volunteers can describe this in more detail if you want to try it.

Change email programme that is used by Aperture or iPhoto

When I try to email a photo within, either iPhoto or Aperture my default email programme is not used. I use entourage as my default email programme, but both Aperture and iPhoto insist in opening Mail. How can I change this?
Message was edited by: Jimbo2008

By insist, do you mean neither iPhoto or Aperture Preference settings will allow you to select entourage as the mail handler?

Java program to send email from lotus notes

Hello,
Please anyone suggest me how to send email from lotus notes using java.
Thanks.

I don't understand the question. Are you asking:
1. How do I send e-mail from Lotus notes manually? Press the Send button.
2. How do I send e-mail from Java? Look into the Java Mail API. Doesn't require Lotus Notes (or any other e-mail client, for that matter).
3. How do I send e-mail to a Lotus Notes address? Just send e-mail to the address (see # 2 above). Nothing special required just because the recipient uses Lotus Notes. FYI: I use Lotus Notes (though I hate it) because it's our company's standard & have written Java apps that send e-mails to Notes. The only time I've had to be aware the recipient was a Notes client was when I was sending HTML formatted messages; then I had to pay attention to the limitations of Notes' brain dead HTML parser.

Multiple drag emails from Mail to a finder window and for it to name the files as the subject heading

Hi
I have been using Mac's now for about 10 years and this is my first problem.
I have recently moved into an office that use PC's with a Windows server.
I have set up the network to transfer files and view the windows server and it works fine.
I have a problem in that my colleagues on PC need to be able to view my emails which I send and receive using Mail. They therefore need to have logical title names and the date sent and ideally who to or from. I view them and archive them using Mail which is fine for me.
I understand about the archiving and copying of mailboxes but this gives every email the un-fathomable title name 9944847 etc.
I can get round the problem by dragging and dropping every email I send and receive individually and it will automatically give it a more logical title of the subject heading however the date is when it was dragged not when sent. This is a pain if I am away or forget to save an email for a day or two and then the date is inconsistent.
Is there a way to batch copy emails from Mail to a finder window and for it to name the files as the subject heading or to archive the files in a similar way so they retain the detailed information my colleagues require.
And no I can not get to all change to Mac and I don't really fancy using Outlook, Entourage or Parallels.
Please help.
Toby

Quit Mail. Force quit if necessary.
Back up all data. That means you know you can restore the Mail database, no matter what happens.
Triple-click the text on the line below to select it:
~/Library/Mail/V2/MailData/Envelope Index
Copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder
from the menu bar. Paste into the box that opens (command-V), then press return.
A Finder window will open with a file selected. Move the selected file to the Desktop, leaving the window open. Other files in the folder may have names that begin with "Envelope Index". Move those files, if any, to the Trash. Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is corrupt and that Mail has to quit. Click OK.
Test. If Mail now works as expected, you can delete the file you moved to the Desktop. If you get a warning that the file is in use when you try to empty the Trash, log out and log back in.

When I use my IPhone 4S to view the Shaw Go Movie Central App when I am at home I only use WiFi which is automatic, I start watching a show and sometimes I will get a message like "you can not use your cellular for video playback" or something close to th

When I use my IPhone 4S to view the Shaw Go Movie Central App when I am at home I only use WiFi which is automatic, I start watching a show and sometimes I will get a message like "you can not use your cellular for video playback" or something close to that. Then I received an email from Telus saying I had used my 3G instead of Wi-Fi using 75% of my data. How can this happen when I'm on Wi-Fi at home? If it switched to 3G for some reason I should have been disconnected and not just transferred to 3G network using up my data. What is the fix for this??

It doesn't have to be that complicated, Verizon iPhones come unlocked, just tell VZ you're going on Holiday/Traveling and suspend the service, no need to pay for service if you're not going to be using it. Pick up local SIM cards in the countries of your choosing, pop them in, re-activate iMessage and you're set!
I recommend getting a SIM card from the Three network in England, they have great EU roaming rates and free like-home roaming in Italy.
Set your phone's region to match the country you're in, it'll save from some headaches when calling local/international numbers.
To answer your questions,
1. If you choose not to have a local SIM card, it is good to keep your phone in Airplane mode to save battery.
2. Make sure the two iPhones have different names to reduce sync/restore issues.
3. If husband has an iPhone also, you can chat with iMessage/Facetime, just give him heads up about the new number you'll have. Otherwise, use Whatsapp if he's got an Android. You can activate Whatsapp with your American number or the international number if you choose to get a SIM in Europe.
Also, Get the MagicJack app and/or Google Hangouts, both of those apps provide you with free calling to the USA and Canada using any internet connection. Google Voice is another good way to SMS across the seas.
Let me know if you need any more tips for iPhoning across the pond.

Workflow Email Notification with blank subject header

Hi Gurus,
I am not a workflow expert but I am looking into a situation where some PO upon sending for PO release approval, there is subject header but for certain country, there isn't any header.
Please advice where to check.
Thanks in advance for your help.

Hello,
First check (in SWEL) which events are created when a sales order is created.
From this you can deduce the BOR object.
See if the business partner's contact person email is an attribute of the object; if not then you will have to add an attribute that deduces the email via an ABAP program or function module.
This attribute should be added to a delegated subtype of the BOR object.
Then you can use the new attribute of the BOR object in the workflow to send him a message.
Try it.
regards
Rick Bakker
Hanabi Technology

Recieved email from WHICH with [Request ID :##55675##] : in the subject heading is crashing my THUNDERBIRD when I move the email from INBOX to local folders

Recieved email from Computer Help at WHICH magazine with [Request ID :##55675##] : in the subject heading is crashing my THUNDERBIRD (and other programs) when I move the email from INBOX to local folders. The only work-around found so far is to shut them down with task manager, as they wont otherwise close.
However if I move the Reply with the same subject heading from my SENT box to LOCAL FOLDERS I dont get the problem.
Hav I found a faulty software trap in the base code.
Thunderbird is up to date and it is on a 64kb intel i7 quad processor 8G ram desktop using windows 7 latest update.

To diagnose problems with Thunderbird, try one of the following:
*Restart Thunderbird with add-ons disabled (Thunderbird Safe Mode). On the Help menu, click on "Restart with Add-ons Disabled". If Thunderbird works like normal, there is an Add-on or Theme interfering with normal operations. You will need to re-enable add-ons one at a time until you locate the offender.
*Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
; If safe mode for the operating system fixes the issue, there's other software in your computer that's causing problems. Possibilities include but not limited to: AV scanning, virus/malware, background downloads such as program updates.

Is there a way to address email (i.e. a word or some code) that would place that email in a specified inbox folder? not using internal rule, rather the beginning of this sort happening as it comes in?

is there a way to address email (i.e. a word or some code) that would place that email in a specified inbox folder? not using internal rule, rather the beginning of this sort happening as it comes in?
In other words
I tell a friend if he is emailing me on a particular subject, is there something he can do at his end ([email protected]/research)
like adding the word research at the end of my eamil address that would tell my inbox to place that in the inbox/research folder?
If I have to use a rule on my end, then do I tell him to just place the word research in the subjct line and then I write a rule to place anything with the word research in the subject line in my inbox/research folder?
will the subject line be required to only have the one word research to work, or will the rule look for any presense of that word in the subject line?
thanks
eric

iCloud email supports 'plus' addressing. http://en.wikipedia.org/wiki/Email_address#Address_tags
So your friend could just add '+research' to the username part of your email address, and you setup a rule at icloud.com to put all emails sent to that address into a particular folder.
For example:
[email protected]
There's no way to do it without rules on the server though.

I have problem sending a email ..spool not created using custom FM

Hi experts,
i have problem sending a email ..spool not created using custom FM...this the custom FM
* Send email notification
      lv_subject = text-037.
      lv_attachment = text-038.
      CALL FUNCTION 'Z_SEND_EMAIL_FROM_SPOOL'
        EXPORTING
          email1            = lv_email1
          email2            = lv_email2
          email3            = lv_email3
          subject           = lv_subject
          attachment_name   = lv_attachment
        EXCEPTIONS
          spool_not_created = 1
          OTHERS            = 2.
Source code
this is the source code for this FM
IF sy-batch EQ 'X'.
    PERFORM get_job_details.
    PERFORM obtain_spool_id.
    PERFORM convert_spool_to_pdf.
    IF sy-subrc IS NOT INITIAL.
      MESSAGE e040(zhrcd) RAISING spool_not_created.
    ENDIF.
    PERFORM process_email USING email1
                                email2
                                email3
                                subject
                                attachment_name.
    WAIT UP TO 5 SECONDS.
    SUBMIT rsconn01 WITH mode   = 'INT'
                    WITH output = 'X'
                    AND RETURN.
ENDIF.....
Please let me know
Edited by: Thomas Zloch on Nov 16, 2010 5:53 PM - please use code tags

Hi srinivas ,
Could you please Check
FORM summary_report .
DATA: lv_success TYPE i,
          lv_error TYPE i,
          lv_total TYPE i.
DESCRIBE TABLE gt_data LINES lv_success.
DESCRIBE TABLE gt_error LINES lv_error.
DESCRIBE TABLE gt_message LINES lv_error.
lv_total = lv_success + lv_error.
lv_total = lv_success.
gwa_summary-record = text-008."Number of Successful records.
gwa_summary-number = lv_success.
APPEND gwa_summary TO gt_summary.
gwa_summary-record = text-009."Number of error records'.
gwa_summary-number = lv_error.
APPEND gwa_summary TO gt_summary.
gwa_summary-record = text-010."Total number of records processed.
gwa_summary-number = lv_total.
APPEND gwa_summary TO gt_summary.
CLEAR gt_fieldcat.
gwa_fieldcat_summ-col_pos = 1 .
gwa_fieldcat_summ-fieldname = 'RECORD'.
gwa_fieldcat_summ-tabname = 'GT_SUMMARY'.
gwa_fieldcat_summ-seltext_l = text-011."Records
gwa_fieldcat_summ-outputlen = '70'.
APPEND gwa_fieldcat_summ TO gt_fieldcat_summ.
gwa_fieldcat_summ-col_pos = 2 .
gwa_fieldcat_summ-fieldname = 'NUMBER'.
gwa_fieldcat_summ-tabname = 'GT_SUMMARY'.
gwa_fieldcat_summ-seltext_l = text-012."Number
gwa_fieldcat_summ-outputlen = '10'.
APPEND gwa_fieldcat_summ TO gt_fieldcat_summ.
ENDFORM.                    " SUMMARY_REPORT
*&      Form ERROR_REPORT
FORM error_report .
gt_fieldcat_err[] = gt_fieldcat[].
gv_fieldcat_err-col_pos = 1.
gv_fieldcat_err-fieldname = 'PERNR'.
gv_fieldcat_err-tabname = 'GT_MESSAGE'.
gv_fieldcat_err-seltext_l = text-070."Employee Number
gv_fieldcat_err-outputlen = '20'.
APPEND gv_fieldcat_err TO gt_fieldcat_err.
gv_fieldcat_err-col_pos = 2.
gv_fieldcat_err-fieldname = 'MESSAGE'.
gv_fieldcat_err-tabname = 'GT_MESSAGE'.
gv_fieldcat_err-seltext_l = text-071."Error Message
gv_fieldcat_err-outputlen = '80'.
APPEND gv_fieldcat_err TO gt_fieldcat_err.
ENDFORM.                    " ERROR_REPORT
*&      Form FINAL_REPORT
FORM final_report .
DATA:lv_layout TYPE slis_layout_alv,
         lt_events_summ TYPE slis_t_event,
         lv_events_summ LIKE LINE OF lt_events_summ,
         lt_events_det TYPE slis_t_event,
         lv_events_det LIKE LINE OF lt_events_det,
         lt_events_err TYPE slis_t_event,
         lv_events_err LIKE LINE OF lt_events_det,
         lt_events_msg TYPE slis_t_event,
         lv_events_msg LIKE LINE OF lt_events_det.
lv_events_summ-name = 'TOP_OF_PAGE'.
lv_events_summ-form = 'TOP_OF_PAGE1'.
APPEND lv_events_summ TO lt_events_summ.
lv_events_det-name = 'TOP_OF_PAGE'.
lv_events_det-form = 'TOP_OF_PAGE2'.
APPEND lv_events_det TO lt_events_det.
lv_events_err-name = 'TOP_OF_PAGE'.
lv_events_err-form = 'TOP_OF_PAGE3'.
APPEND lv_events_err TO lt_events_err.
lv_events_msg-name = 'TOP_OF_PAGE'.
lv_events_msg-form = 'TOP_OF_PAGE4'.
APPEND lv_events_msg TO lt_events_msg.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
    EXPORTING
      i_callback_program = sy-repid.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
    EXPORTING
      is_layout                        = lv_layout
      it_fieldcat                      = gt_fieldcat_summ
      i_tabname                        = 'IT_SUMMARY'
      it_events                        = lt_events_summ
IT_SORT                          =
I_TEXT                           = ' '
    TABLES
      t_outtab                         = gt_summary
EXCEPTIONS
PROGRAM_ERROR                    = 1
MAXIMUM_OF_APPENDS_REACHED       = 2
OTHERS                           = 3
IF CHK_DTL IS NOT INITIAL.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
    EXPORTING
      is_layout                        = lv_layout
      it_fieldcat                      = gt_fieldcat
      i_tabname                        = 'gt_data'
      it_events                        = lt_events_det
IT_SORT                          =
I_TEXT                           = ' '
    TABLES
      t_outtab                         = gt_data
EXCEPTIONS
PROGRAM_ERROR                    = 1
MAXIMUM_OF_APPENDS_REACHED       = 2
OTHERS                           = 3
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
   EXPORTING
     is_layout   = lv_layout
     it_fieldcat = gt_fieldcat_err
     i_tabname   = 'gt_error'
     it_events   = lt_events_err
   TABLES
     t_outtab    = gt_error.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
   EXPORTING
     is_layout   = lv_layout
     it_fieldcat = gt_fieldcat_msg
     i_tabname   = 'gt_message'
     it_events   = lt_events_msg
   TABLES
     t_outtab    = gt_error.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
    EXPORTING
      is_layout   = lv_layout
      it_fieldcat = gt_fieldcat_err
      i_tabname   = 'gt_message'
      it_events   = lt_events_err
    TABLES
      t_outtab    = gt_message.
IF GT_MESSAGE[] IS NOT INITIAL.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
    EXPORTING
      is_layout   = lv_layout
      it_fieldcat = gt_fieldcat_msg
      i_tabname   = 'gt_message'
      it_events   = lt_events_msg
    TABLES
      t_outtab    = gt_message.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
EXPORTING
   i_interface_check             = ' '
IS_PRINT                      =
   i_screen_start_column         = 0
   i_screen_start_line           = 0
   i_screen_end_column           = 0
   i_screen_end_line             = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER       =
ES_EXIT_CAUSED_BY_USER        =
EXCEPTIONS
PROGRAM_ERROR                 = 1
OTHERS                        = 2
ENDFORM.                    " FINAL_REPORT
*&      Form top_of_page
      text
FORM top_of_page1.                                          "#EC CALLED
WRITE text-013."SUMMARY REPORT.
ENDFORM.                    "top_of_page
*&      Form top_of_page2
      text
FORM top_of_page2.                                          "#EC CALLED
WRITE text-014."DETAIL REPORT.
ENDFORM.                    "top_of_page
*&      Form top_of_page3
      text
FORM top_of_page3.                                          "#EC CALLED
WRITE text-015."ERROR REPORT
ENDFORM.                    "top_of_page
*&      Form EMAIL_NOTIFICATION
FORM email_notification .
DATA: lv_email1 TYPE somlreci1-receiver,
       lv_email2 TYPE somlreci1-receiver,
       lv_email3 TYPE somlreci1-receiver,
       lv_subject TYPE char200,
       c_flag     TYPE c           VALUE 'X',
       lv_attachment TYPE char50.
CLEAR: lv_email1,
         lv_email2,
         lv_email3,
         lv_subject,
         lv_attachment.
SELECT SINGLE email1
                email2
                email3
    FROM zhr_interface_pr
    INTO (lv_email1,lv_email2,lv_email3)
    WHERE zinterfaceid EQ gc_objectid.
IF sy-subrc EQ 0.
    IF sy-batch EQ 'X'.
Send email notification
      lv_subject = text-037.
      lv_attachment = text-038.
      CALL FUNCTION 'Z_SEND_EMAIL_FROM_SPOOL'
        EXPORTING
          email1            = lv_email1
          email2            = lv_email2
          email3            = lv_email3
          subject           = lv_subject
          attachment_name   = lv_attachment
        EXCEPTIONS
          spool_not_created = 1
          OTHERS            = 2.
      IF sy-subrc <> 0.
      ENDIF.
    ENDIF.
ENDIF.
ENDFORM.                    "
Edited by: katewinslate@SAP on Nov 17, 2010 12:50 PM

How do i print email header, not just the body?

I just got an HP Photosmart 5110 and am setting up eprint on a laptop with Windows 7 64-bit. The eprint function is working fine, but it prints only the text of the email, not the full email including header. How can I get it to print the header (i.e. "From, Sent, To, Subject"). Thanks.

Appreciate the reply from fertileground and would ask that HP add an option for including header info with the content of a message.
As a practical matter the source and time of a message received overngiht or on weekend or anytime of day is needed to file or even act on an item. Fairly basic info.
Let me know the best means to submit this request to the HP eprint managers and I'll do so.
rjw/mkc

How do I get messages to go back to an AIM account? It's only seeing the iPad's Facetime email address and not seeing the old AIM account name that is on my desktop. I am using my iMac using iChat to talk to a newer iMac that doesn't have iChat.

How do I get messages to go back to an AIM account? It's only seeing the iPad's Facetime email address and not seeing the old AIM account name that is on my desktop. I am using my iMac using iChat to talk to a newer iMac that doesn't have iChat. We had this working using Messages and Facetime (on the new machine) talking to my existing iChat account. One day last week, when Facetime rang, my kids answered on the iPad. Dang! Now it's all fouled up! The new iMac won't see my AIM account name and shows that I'm offline, because the iPad is off. We were able to call using "most recent call" in Facetime, but now I can't go and control that new iMac remotely to help with some email concerns the user is having. I'm trying to not personalize this too much, but it's grandkids talking to Grandma and Mom and Dad trying to solve new machine hiccups. Normally, I could just go in via iChat and control the other machine and troubleshoot, but I can't do it with Facetime only. My buddy list doesn't see the other computer even though we are connected on Facetime right now. My name is not highlighted for the other computer. What could have gone so wrong?
Any help would be appreciated.

How do I get messages to go back to an AIM account? It's only seeing the iPad's Facetime email address and not seeing the old AIM account name that is on my desktop. I am using my iMac using iChat to talk to a newer iMac that doesn't have iChat. We had this working using Messages and Facetime (on the new machine) talking to my existing iChat account. One day last week, when Facetime rang, my kids answered on the iPad. Dang! Now it's all fouled up! The new iMac won't see my AIM account name and shows that I'm offline, because the iPad is off. We were able to call using "most recent call" in Facetime, but now I can't go and control that new iMac remotely to help with some email concerns the user is having. I'm trying to not personalize this too much, but it's grandkids talking to Grandma and Mom and Dad trying to solve new machine hiccups. Normally, I could just go in via iChat and control the other machine and troubleshoot, but I can't do it with Facetime only. My buddy list doesn't see the other computer even though we are connected on Facetime right now. My name is not highlighted for the other computer. What could have gone so wrong?
Any help would be appreciated.

Watch Email - Subject header not useful

Similar Messages

Maybe you are looking for