Watch TV with 5200 VTD 128 - Coaxial to RCA ?

Hello!!
I want to know if there is any option to use my video card fx 5200 VTD 128 to watch tv. I want to know if there is a connector that converts Coaxial to RCA Inputs...because I receive the coaxial cable from my tv provider, but I have RCA inputs in my video card....so is there any option, or should I buy a TV Tuner card?
Thanks!!!

hmmm.. AFAIK 'coaxial' is an adjective for a type of cable ~only~ (as in a coaxial cable), not a type of plug/socket standard. Also, the card requires a composite video signal, while signal from an aerial is an RF signal. The VTDR model can take an RF signal because it has an inbuild TV tuner. But you can use any ol' VCR as a TV tuner. Connect the cable from the aerial into the the Aerial-in (RF-in) on your VCR, and an RCA cable from the video-out on the VCR to the video-in on the card.
Tony.

Similar Messages

Connect Playstation to FX 5200 VTD 128 - No sound

Hi!.
I have a FX 5200 Video Card, and I've just connected my playstation to it. My playstation has 3 cables (yellow, red and white) but my video card has only one input for one rca jack. So, I connected the yellow one, and it works.
Im using the MSI Media Center Deluxe II, and I can play all my games, but ther is NO SOUND at all. I cant hear anything. I tried with the other cables, red and white, but it doesnt work.
What should I do?
Mainboard ASUS A78NX DELUXE
AMD XP 2.4 Ghz
RAM 512 DDR
DVD SAMSUNG
ASUS CDRW 52X24X52X
HD HITACHI 120 GB
DRIVE 3 1/2
GEFORCE FX 5200 VTD 128

Absolutly not, the VGA card only has a video input, what you need is a 2RCA->3.5mm stereo adapter and plug it in to the Line-In of your sound card

Msi 5200 Vtd 128

I have a problem with choosing my nview mode, I cannot choose dualview or clone mode. It only displays 1 item, single display only. I already updated my driver to 53.03 but still doesnt work. I can choose whether to display analog or tv but I want both to work simltaneously and to display in clone mode. My tv out is working ok when i choose to display it on tv but my monitor goes black.
SPECS :
MB - MSI 845 GE MAX / P4 1.8 GHZ
MEM - 256 DDR
OS - WINDOWS XP PRO SP1
MONITOR - SAMSUNG 151 S LCD SYNCMASTER
My old video card was working ok with clone mode, it was a geforce 4 mx 440.
please help.

Hello, thanks for answer. I can tell you that my monitor is a ViewSonic E771 and there is no driver for Windows 2k in the Homepage of ViewSonic because Windows 2k auto detect it.
In the monitor tab of "Advanced options in the Display panel" it says: "Monitor tipe: ViewSonic E771". I don't trust in microsoft drivers very much, but in this case I have no choise, there isn't another driver for this monitor in the world! but what I can do is to try with another monitor to see if it work, then I tell u.
The extrange thing is that before with my GeForce 2 MX 400 I had the same computer, same windows, same monitor and same TV and everything was OK.
I'm already loosing hopes in that someday I'll have my TV and monitor turned on at the same time with my VGA!
Thanks again...

How to watch tv with FX 5600 XT vtdr 128

How to watch tv with FX 5600 XT vtdr 128?

unplug the connection of the card and the monitor.
connect the card and the tv, then start the computer.

Msi Kt4v With Msi Fx 5200 Td 128 Crash

WHEN I PLAY SOME GAME, FOR EXAMPLE, PRINCE OF PERSIA OR ANOTHER APLICATTION THAT USE DIRECT3D, MY PC FREEZES AND REBOOT.
WHEN I PLAY DXDIAG...THE PC FREEZES TOO
I INSTALED THE LAST VERSION OF THE DRIVERS AND VIA 4 &1 AND LAST VERSION BIOS TOO. I FORMATED THE WINDOWS MANY TIMES.
I THINK THAT AN INCOMPATIBILITY WITH MSI TD 128 FX 5200 AND MSI KT4V ( KT 400).
WHAT DO YOU THINK ABOUT THIS?

I have windows xp sp1
palomino 1,8 - 266 MHZ
256 ddr - 266 mhz
hd maxtor 40 gb - 7200
PSU 500 W -
+3.3 = 28A
+5v = 50A
+12v = 18A

PROBLEM: MSI NVIDIA 6600GT VTD-128(AGP) COLOR LOST

Hi guys,
i have a problem with my MSI 6600GT VTD 128 (AGP)..the blue color is lost..so now, my graphic colors are only green & red..Anyone have any suggestion on how to fix this? btw, my warranty is over..

Quote from: wildsurf on 10-June-07, 14:23:42
Thanx BOSSKILLER,
yes, i'm sure i've plugged the monitor cable perfectly..i even tested it with 2 pc and monitor and the colors are only red & green..the blue color seems to be lost..Can you tell me how to fix it?
have you tested with different monitor too? check VGA cooling system as well.

GeForceFX 5200 tdr-128 overclock problems

I have a msi k7n2 mobo with the last drivers (nforce2) and bios, I'm runing my msi GeForceFX 5200 tdr-128 with the last drivers and bios too on windows xp sp1 with the last updates, the system is runing perfectly with no problems at all, but when I try to overclock my video card using that D.O.T (dynamic overclock tecnology) my windows looks up with memory blow , the mostpowerfull option is commander, with 275 mhz on 3d core clock (250 by default) and 440 mhz on memory (400 by default) the 2d clock stay the same. But I can overclock my 3d clock up to 295mhz with no problems but if I put more 5mhz on memory clock the system loocks up in 30-45 min .
WHY CANT I OVERCLOCK MY DAMN MEMORY CLOCK???
The msi site says it is full compatible with the D.O.T and I'm using a MSI MOBO dammit
And yes... I have a cooler on the video card, and left 2 side cooler on my cpu case (1 on the dual memory and 1 on the video card) plus 2 back exaust and a vulcano 9 on my athlon 2.4 xp.
what can I do???
I think maybe the sollution it is the raise the agp voltage but im afraid

40MHz on your ram is quite large anyways, and if you dont have ram-sinks on your VGA card (both sides) that might be a good solution, also stock cooling on the GPU with large increasements is not a good idea. I would not overclock the 5200 card anyways your taking a risk of blowing something up for no performace increase that card is pretty much all budget there is not much helping that card sorry.

What is the voltage of the GeForceFX 5200 TD-128?

What is the voltage of the GeForceFX 5200 TD-128? (1.5v, 3.0v?)
Thanks!

Woot!, Thank god, Just bought a board with 1.5v Max :P
Thanks for info!

Does MSI fx5900 "SP"-VTD 128 support temperature monitoring?

Hello everybody!!!
I really need someone's help here.I recently used the coolbits hack to overclock my card(MSI FX5900 SP-VTD 128).It runs fine after overclocking but the problem is that I can't monitor the cards temperature!!!
I used both the 3D Turbo Expirience and the registry hack to add those DWORD values that enable the thermal monitoring,but even after that I couldn't see the card's temperature!!!
Is there anyone who can give me a solution to this problem?I really don't want to damage my card by overheating it!!!

I have the same card as you the MSI FX5900SP 128VTD and it does have temp monitoring, i has used different drivers and my temp monitoring tab has always worked o.k, you may have damaged it already if you are excessivly O/C the card, i can only get mine to 465/812 before i start to see affects or lockups, so that may be the case, i am looking to flash my card though with a bios from a FX5900U to get the O/C that i want but i want to know if its been done first , i know you can do a FX5900U to a FX5950U so why not a FX5900SP(XT or SE) to a FX5900U?

Msi Fx5900xt Vtd 128 Driver.

What driver NVIDIA WHQL for MSI FX5900 XT VTD 128 have maximum performance?
THANKS!

for me, the most stable driver is the 56.72. i am running my msi nvidia fx 5200 really stable and its overclocked.

5200 td-128 dvi-i not working

Greetings. I just got a 5200 TD-128 with the DVI-I output. I connected it to my LCD but there is no display. I connected another LCD to the DSUB (analog) port and it works fine. When I go to the display properties, I can only select Analog or TV-OUT from the drop-down menu. There is no option to select Digital.
I just installed the driver that came on the MSI CD-ROM. Do I need to get the latest driver from NVIDIA? Or does this sound like a hardware problem?
Thanks for any help!

I would try to see if there is an updated MSI driver first, run Driver Cleaner first with System Restore OFF, make sure to clean ALL nVidia video driver off the system, then reboot, cancel any prompts to load drivers and install MSI's latest (if there is one)...
If that doesn't work then repeat the above process with nVidia's latest...
If that doesn't work then it's probly a hardware problem and I'd take the card back for replacement...

HT201667 I rented a movie through itunes on my ipad and wanted to watch it with friends on a digital projector, but it wouldn't allow me to do it. Is there any way around this?

I rented a movie through itunes on my ipad and wanted to watch it with friends on a digital projector, but it wouldn't allow me to do it. Is there any way around this?

The issue was that a dialogue box came up which said that I couldn't play this movie on another device. I tried playing the same movie on an Tv with an HDMI connection attached to an adapter to the IPad and that worked. I wonder if the problem is that the digital projector has a VGA connection.

Jdeveloper - Process exited with exit code 128.

Oracle,
I downloaded Jdeveloper from Oracle website. I tried to create simple helloworld jsp & tried to run from jdeveloper.
I set project properties->compiler->use Javac also, but still it gives same error message in "Running Embedded OC4j server Log"
In Messages tab
============
Compiling...
[1:04:07 PM] Successful compilation: 0 errors, 0 warnings.
In Running Embedded OC4j server Log
============================
[Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
**** Unable to obtain password from principals.xml. Using default.
C:\unzipped\jdevstudio1013\jdev\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\config>
C:\unzipped\jdevstudio1013\jdk\bin\javaw.exe -ojvm -classpath C:\unzipped\jdevstudio1013\j2ee\home\oc4j.jar;C:\unzipped\jdevstudio1013\jdev\lib\jdev-oc4j-embedded.jar -Dhttp.proxyHost=hoproxy.scif.com -Dhttp.proxyPort=8080 -Dhttp.nonProxyHosts=*.rapidscontrol.biz|ecf|10.*|*.scif.com|localhost|127.0.0.1 -Dhttps.proxyHost=hoproxy.scif.com -Dhttps.proxyPort=8080 -Dhttps.nonProxyHosts=*.rapidscontrol.biz|ecf|10.*|*.scif.com|localhost|127.0.0.1 -Xverify:none -DcheckForUpdates=adminClientOnly -Doracle.application.environment=development -Doracle.j2ee.dont.use.memory.archive=true -Doracle.j2ee.http.socket.timeout=500 -Doc4j.jms.usePersistenceLockFiles=false oracle.oc4j.loader.boot.BootStrap -config C:\unzipped\jdevstudio1013\jdev\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\config\server.xml
[waiting for the server to complete its initialization...]
Process exited with exit code 128.
Please advise
Thanks
Christy

Christy,
what is the operation system you are running JDeveloper on ?
To further debug the problem, can you open a command line at <Jdeveloper Directory>\j2ee\home
(assuming Windows) type
..\..\jdk\bin\java oc4j.jar
provide an administration password when asked. This command starts the embedded OC4J as a stand-alone server and prints messages to the console window
Let us know if this gives more detailed error messages or if it starts up
Frank

HELP!! Process exited with exit code 128.

Hi all,
I am using JDeveloper 10G to develop a struts project. I use the struts-tiles.tld to construct the layout.
<tiles:insert page="classicLayout.jsp" flush="true">
<tiles:put name="title" value="User and Assigned Role" />
<tiles:put name="header" value="menuTemplate.jsp" />
<tiles:put name="menu" value="TestPoint.jsp" />
<tiles:put name="body" value="ARM001800.jsp" />
<tiles:put name="footer" value="DebugPage.jsp" />
</tiles:insert>
However, when I run the project, then the OC4J Server terminated with this error code : Process exited with exit code 128.
What happen??
PS: I tried to remove the last 2 tags: body and footer. The Server did not terminate, but with some exceptions which related to tiles library.

This type of error may occur because of developers mistake.
This error occurs when any function is called recursively in a loop.
The server calls the same function again and again in a loop and hence the server goes in infinite loop. This gives the error "Process exited with exit code 128".
You need to check your code thoroughly for such mistake.
Nital.
i-engineering.com

Process exited with exit code 128 using embedded OC4J (jdevsetudio1013)

I've just downloaded Oracle JDeveloper (10.1.3) - Production JAN 2006 version (Studio Edition), installied and configure as the install guide, downladed SU5 (Studio Edition version 10.1.3.0.4 Build JDEVADF_10.1.3_NT_060125.0900.3673) and JUnit extensions and SR. When I tried to run Oracle ADF SRDEMO Application, I´ve just got this error message:
[EJB 3.0]: Assigning default-data-source=jdbc/SRDemoDS, specified in projects EJB 3.0 properties
[Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
**** Unable to obtain password from principals.xml. Using default.
E:\mywork\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\config>
"C:\Program Files\Java\jdk1.5.0_08\bin\javaw.exe" -ojvm -classpath E:\jdevstudio1013\j2ee\home\oc4j.jar;E:\jdevstudio1013\jdev\lib\jdev-oc4j-embedded.jar -Xverify:none -DcheckForUpdates=adminClientOnly -Doracle.application.environment=development -Doracle.j2ee.dont.use.memory.archive=true -Doracle.j2ee.http.socket.timeout=500 -Doc4j.jms.usePersistenceLockFiles=false oracle.oc4j.loader.boot.BootStrap -config E:\mywork\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\config\server.xml
[waiting for the server to complete its initialization...]
Process exited with exit code 128.
I'm using a Microsoft Windows Server 2003 Standard Edition Service Pack 1 inside a VMware workstation (version 5.5.2.build-29772) with 1.4GB of RAM with an Oracle 10gR2 for windows (10.2.0.1.0)
I don´t know if it is a configuration problem or that Windows Server 2003 SP1 is not supported or any other problem.
Any help you can give on this would be much appreciated.
Thanks,
Orlando

thanks for your idea...but in my environment there no JAVA_OPTIONS defined. This is a copy of my console after running set:
ALLUSERSPROFILE=C:\Documents and Settings\All Users
ANT_HOME=C:\apache-ant-1.6.5
APPDATA=C:\Documents and Settings\Administrator\Application Data
APR_ICONV_PATH=C:\Program Files\Subversion\iconv
CATALINA_HOME=C:\ASF\Tomcat 5.5
ClusterLog=C:\WINDOWS\Cluster\cluster.log
CommonProgramFiles=C:\Program Files\Common Files
COMPUTERNAME=OGJEE
ComSpec=C:\WINDOWS\system32\cmd.exe
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\Administrator
JAVA_HOME=C:\Program Files\Java\jdk1.5.0_08
JBOSS_HOME=C:\jboss-4.0.4.GA-Patch1
LOGONSERVER=\\OGJEE
M2_HOME=C:\ASF\maven-2.0.4
M2_REPO=C:\Documents and Settings\Administrator\.m2\repository
MAVEN_OPTS=-XX:MaxPermSize=128m -Xmx512m
NUMBER_OF_PROCESSORS=1
OS=Windows_NT
Path=E:\oracle\product\10.2.0\db_1\bin;C:\Program Files\Support Tools\;c:\Progra
m Files\Windows Resource Kits\Tools\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\S
ystem32\Wbem;;C:\Program Files\Subversion\bin;C:\Program Files\Java\jdk1.5.0_08\
bin;C:\ASF\maven-2.0.4\bin;C:\Program Files\MySQL\MySQLServer5.0\bin;C:\apache-a
nt-1.6.5\bin;;C:\Program Files\STI\bin\pc-win95
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PERL5LIB=E:\oracle\product\10.2.0\db_1\perl\5.8.3\lib\MSWin32-x86;E:\oracle\prod
uct\10.2.0\db_1\perl\5.8.3\lib;E:\oracle\product\10.2.0\db_1\perl\5.8.3\lib\MSWi
n32-x86;E:\oracle\product\10.2.0\db_1\perl\site\5.8.3;E:\oracle\product\10.2.0\d
b_1\perl\site\5.8.3\lib;E:\oracle\product\10.2.0\db_1\sysman\admin\scripts;
PROCESSOR_ARCHITECTURE=x86
PROCESSOR_IDENTIFIER=x86 Family 6 Model 13 Stepping 8, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=0d08
ProgramFiles=C:\Program Files
PROMPT=$P$G
SESSIONNAME=Console
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp
TMP=C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp
USERDOMAIN=OGJEE
USERNAME=localadmin
USERPROFILE=C:\Documents and Settings\Administrator
windir=C:\WINDOWS
tthanks anyway

Watch TV with 5200 VTD 128 - Coaxial to RCA ?

Similar Messages

Maybe you are looking for