Watched ipad flash and disable itself

after restoring my ipad yesterday, i plugged it in this morning to charge
after a few minutes i was in the kitchen and my eyes were drawn to it when the light flashed on by itself. it was on the lock screen and started flashing like repeatedly getting the incorret passcode time after time after time
it then disabled itself
what the..?

um... i have worked out what happenned,
bluetooth keyboard was in bag (it doesn't have an off buttom)
and i must have moved the bag so that something was hitting the buttons..
oops
fyi

Similar Messages

IPad 1 and disabling Passcode/lock option on Find My IPad

I have an iPad 1. Just got the Find my IPad app after 3 years. But, after setting it up, I discovered that it locks and requires my password every time it goes to sleep or is turned off. I thought I could instruct it to be locked if I lost it and did not realize it would lock all the time. I have searched everywhere to see how to disable this but when I go to the LOCK option under this device in the Find My Ipad app as instructed, there is no option to turn the lock/ Passcode command off. I desparately want to get rid of the need to enter a Passcode. If I can't do it here, can I somehow cancel my subscription to Find My IPad? Help please!

I just found the solution elsewhere in the forum. Go to Settings/General/Passcode Lock/. When prompted, put in your Passcode. Now you will be able to switch it to OFF. It will ask yu to put your code in once again, and then, voila! The lock screen is forever gone!

HT1766 my ipad has disabled after asking for a passcode which has never been put on this ipad and now disabled itself ???

my ipad has disabled itself after asking for a passcode after updating ios7 now tried to restore it but didnt work

iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

My iPad mini keeps turning itself off and then the apple logo keeps flashing constantly, i have charged it fully and restored it many times. what can i do?

My iPad mini keeps turning itself off and then the apple logo keeps flashing constantly, i have charged it fully and restored it many times. what can i do?

If you have restored to factory settings and started as new, there is nothing more that you can do on your own. Make an appointment at an Apple Store and ask them for help. You might have a hardware problem and the Apple Store techs will be able to determine that.

I have 3 ipads with ipad 1 and 4 i can see near all videos from facebook but on the ipad 2 is asking for adobe flash player and its the same video that i watch on the other ipads ! Any help please

I have 3 ipads with ipad 1 and 4 i can see near all videos from facebook but on the ipad 2 is asking for adobe flash player and its the same video that i watch on the other ipads ! Any help please

Adobe has not made a version of Flash for the iPad.
Kappy explains why. https://discussions.apple.com/message/19446567#19446567
5 Flash Player Alternatives http://www.techshout.com/features/2011/01/flash-player-for-ipad-apps/
Top 4 browsers supports flash player on iPad and iPhone
http://mashtips.com/flash-player-ios/
 Cheers, Tom

Flash player 11 (11.1.102.55) disables itself every time I reboot!   Win 7 -Thinkpad T500

   Craziest thing has happened to my laptop. For about 3 weeks I have had this issue. Everytime I reboot, Adobe Flash player diables itself. I say disable rather than uninstalls since when I look into the Programs section under Control Panel it says Flash Player 11.1.102.55 is there.   But when I try to play something such as a YouTube video or anything that requires Flash Player it will not run and says " You need to Upgrade your Adobe Flash Player" or in the case of a YouTube video embedded in a website it says "The Adobe Flash Player or an HTML5 supported browser is required for video playback.". I use IE 9 for my browser. I then have to re-install Flash Player onto the laptop and then I can once again play video.
Then I just saw the followng item today when I booted my computer up in the morning. First time I have seen this.   Upon Bootup and not doing a single thing to the laptop but booting up, Windows gave me a message that said " Adobe Flash Player Installer/Uninstaller 10.1 r102 has stopped working". It then generated a few files for me and asked if I wanted to send more infoarmtion about the problem. One of the files was a .txt file.    The other was a mdmp fil and the other was a .xml file. The .txt file is copied below.
Can someone help me fix this!
Thank you,
Marc
.txt file below :
<?xml version="1.0" encoding="UTF-16"?>
<DATABASE>
<EXE NAME="if.exe" FILTER="CMI_FILTER_PRIVACY">
    <MATCHING_FILE NAME="if.exe" SIZE="2827728" CHECKSUM="0x756E95ED" BIN_FILE_VERSION="10.1.102.64" BIN_PRODUCT_VERSION="10.1.102.64" PRODUCT_VERSION="10,1,102,64" FILE_DESCRIPTION="Adobe® Flash® Player Installer/Uninstaller 10.1 r102" COMPANY_NAME="Adobe Systems, Inc." PRODUCT_NAME="Flash® Player Installer/Uninstaller" FILE_VERSION="10,1,102,64" ORIGINAL_FILENAME="FlashUtil.exe" INTERNAL_NAME="Adobe® Flash® Player Installer/Uninstaller 10.1" LEGAL_COPYRIGHT="Copyright © 1996-2010 Adobe, Inc." VERDATEHI="0x0" VERDATELO="0x0" VERFILEOS="0x4" VERFILETYPE="0x2" MODULE_TYPE="WIN32" PE_CHECKSUM="0x2BD959" LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="10.1.102.64" UPTO_BIN_PRODUCT_VERSION="10.1.102.64" LINK_DATE="10/22/2010 03:00:22" UPTO_LINK_DATE="10/22/2010 03:00:22" VER_LANGUAGE="English (United States) [0x409]" EXE_WRAPPER="0x0" />
</EXE>
<EXE NAME="if.exe" FILTER="CMI_FILTER_THISFILEONLY">
    <MATCHING_FILE NAME="if.exe" SIZE="2827728" CHECKSUM="0x756E95ED" BIN_FILE_VERSION="10.1.102.64" BIN_PRODUCT_VERSION="10.1.102.64" PRODUCT_VERSION="10,1,102,64" FILE_DESCRIPTION="Adobe® Flash® Player Installer/Uninstaller 10.1 r102" COMPANY_NAME="Adobe Systems, Inc." PRODUCT_NAME="Flash® Player Installer/Uninstaller" FILE_VERSION="10,1,102,64" ORIGINAL_FILENAME="FlashUtil.exe" INTERNAL_NAME="Adobe® Flash® Player Installer/Uninstaller 10.1" LEGAL_COPYRIGHT="Copyright © 1996-2010 Adobe, Inc." VERDATEHI="0x0" VERDATELO="0x0" VERFILEOS="0x4" VERFILETYPE="0x2" MODULE_TYPE="WIN32" PE_CHECKSUM="0x2BD959" LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="10.1.102.64" UPTO_BIN_PRODUCT_VERSION="10.1.102.64" LINK_DATE="10/22/2010 03:00:22" UPTO_LINK_DATE="10/22/2010 03:00:22" VER_LANGUAGE="English (United States) [0x409]" EXE_WRAPPER="0x0" />
</EXE>
<EXE NAME="kernel32.dll" FILTER="CMI_FILTER_THISFILEONLY">
    <MATCHING_FILE NAME="kernel32.dll" SIZE="1048576" CHECKSUM="0x2E98E39A" BIN_FILE_VERSION="6.1.7600.16850" BIN_PRODUCT_VERSION="6.1.7600.16850" PRODUCT_VERSION="6.1.7600.16385" FILE_DESCRIPTION="Windows NT BASE API Client DLL" COMPANY_NAME="Microsoft Corporation" PRODUCT_NAME="Microsoft® Windows® Operating System" FILE_VERSION="6.1.7600.16385 (win7_rtm.090713-1255)" ORIGINAL_FILENAME="kernel32" INTERNAL_NAME="kernel32" LEGAL_COPYRIGHT="© Microsoft Corporation. All rights reserved." VERDATEHI="0x0" VERDATELO="0x0" VERFILEOS="0x40004" VERFILETYPE="0x2" MODULE_TYPE="WIN32" PE_CHECKSUM="0x10F4A4" LINKER_VERSION="0x60001" UPTO_BIN_FILE_VERSION="6.1.7600.16850" UPTO_BIN_PRODUCT_VERSION="6.1.7600.16850" LINK_DATE="07/16/2011 04:33:08" UPTO_LINK_DATE="07/16/2011 04:33:08" EXPORT_NAME="KERNEL32.dll" VER_LANGUAGE="English (United States) [0x409]" EXE_WRAPPER="0x0" FILE_ID="00008bf5690fa7cfef05e71ecda3440904222adf216b" PROGRAM_ID="0000f519feec486de87ed73cb92d3cac802400000000" />
</EXE>
</DATABASE>

For those that were following along with this thread, we were able to find the culprit by examining the FlashInstall.log. The log looked like this:
=O====== M/10.1.102.64 2012-01-24+01-17-54.633 ========
0000 [I] 00000010 "C:\ProgramData\MediaMall\if.exe" -uninstall activex
0001 [W] 00001037 SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Adobe Flash Player ActiveX/ 2
0002 [W] 00001037 Software\Microsoft\Windows\CurrentVersion\RunOnce/FlashPlayerUpdate 2
0003 [W] 00001037 Software\Macromedia\FlashPlayerActiveX/ 2
0004 [W] 00001037 Software\Macromedia\FlashPlayer/SwfInstall 2
0005 [W] 00001037 Software\Microsoft\Code Store Database\Distribution Units\{D27CDB6E-AE6D-11CF-96B8-444553540000}/ 2
0006 [W] 00001021
=X====== M/10.1.102.64 2012-01-24+01-17-54.789 ========
=O====== M/10.1.102.64 2012-01-24+01-17-54.836 ========
0000 [I] 00000010 "C:\ProgramData\MediaMall\if.exe" -install
0001 [W] 00001037 SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Adobe Flash Player ActiveX/ 2
0002 [I] 00000013 C:\Windows\SysWOW64\Macromed\Flash\Flash10l.ocx
0003 [I] 00000015 C:\Windows\SysWOW64\Macromed\Flash\FlashUtil10l_ActiveX.exe
0004 [I] 00000016 C:\Windows\SysWOW64\Macromed\Flash\FlashUtil10l_ActiveX.dll
=X====== M/10.1.102.64 2012-01-24+01-17-56.599 ========
This told me that something called "C:\ProgramData\MediaMall\if.exe" was uninstalling then immediately installing itself on system startup. We tracked this executable down to a service called PlayOn. Once this service was disabled, Marc was able to install the latest version of Flash Player without having it uninstalled the next time he rebooted.
Chris

Help enabling gnash and disabling flash in Firefox

This is a "Further woes with..." thread, following on from https://bbs.archlinux.org/viewtopic.php?id=164901. In that episode, I managed to watch a youtube video by installing the gnash plugin and gstreamer0.10-ffmpeg, disabling the flash plugin in Firefox and enabling the gnash one.
Now, however, I find that gnash is disabled as well as flash. Moreover, if I enable gnash, flash is also enabled. If I disable flash, gnash is also disabled.
Disclaimer: I use a Firefox binary from Mozilla because I cannot otherwise use my preferred interface language. However, Firefox (/usr/local/bin/firefox which is linked to the binary in /usr/local/lib/firefox) has no problems using Arch plugins installed at /usr/lib/mozilla/plugins. I also have icedtea, kpartsplugin and djview (though I forget why I have the last).
The plugins are definitely there according to both pacman and ls /usr/lib/mozilla/plugins.
Does anybody have any idea why Firefox insists it must be either flash and gnash or no ash at all? I realise I could just uninstall flash but I'm reluctant to do this unless I really have to as it is handy to be able to enable it quickly if necessary. I just want to keep it disabled so Firefox etc. picks up gnash. (Actually, Firefox should default to gnash given my settings for mimetypes in preferences but that doesn't seem to be effective.)

That is interesting, flahsplugin doesn't work at all? That is strange, and not the first time I have heard that. It makes me wonder then why you want to keep flashplugin installed on your computer if it doesn't do much.
If you are willing to open a different browser to watch youtube videos, chromium seems to handle these plugins quite well. I actually have, ATM for testing here, flashplugin, pepper flash, and gnash. I was able to enable each one by one, and it seemed to be doing what I wanted it to do.
Besides that, I actually keep pepper flash set up for chromium all the time. I actually find it to be pretty superior to flashplugin, though it doesn't change my opinion that the world needs to move away from flash content more quickly. It is in the AUR and is very easy to install. As long as you don't have anything set in /etc/chromium/default, the install script will set eveything up automatically for you. If you do have something there (I keep the cache in tmpfs with --disk-cache-dir=/tmp), then you just need to edit the file and clean it up a little. It gets the quoting all wonky.

Why would iPad mini disable itself when correct passcode is entered?

My daughter's iPad mini disabled itself even though an incorrect password was never entered? It started with a 15 minute lock out followed by 30. At some point it went to a 60 minute lockout and after a half hour or so reverted back to 60 minutes for no reason. I finally got my hands on it and after the 60 minute clock expired I correctly entered the first three digits of the passcode and the iPad promptly disabled itself for good. This makes no sense. I'm aware of the restore drill. What I want to know is this: Why did this happen and is there some sort of Hail Mary play that will prevent a complete restore.

Did you reboot the router?
If that doesn't work, test it... will it connect to a public router (wifi) like in a bookstore or public area? If it works, then the problem is with your router.

My ipad keeps disabling itself

My ipad has disabled itself twice for no reason. Anyone else having this problem? I haven't put in the wrong password. It just disables itself.

Weird.
I don't want to give you false confidence but try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
Hopefully you're within reasonable distance of an Apple Store. If so, make an appointment and visit the resident "Genius." Otherwise, a call to Apple might be appropriate. You're beyond the time period for free phone support BUT the iPad is still in warranty so I don't know what you'll have to say to avoid getting charged for the call. 800-275-2273 in the U.S.A. and I think Canada.

Does ipad 3 support adobe flash and other various video formats?

does ipad 3 support adobe flash and other various video formats? Thanks/////!

Flash is not a video format. Flash is a platform that consists of a scripting language, and plug-in or application that presents a canvas and resources to run the scripts. It is possible for Flash to load video and play them in the canvas, but the video itself is a separate resource. Flash became a popular mechanism for video plaback mostly because the plugin was available for multiple browsers and the video codecs that Flash could load were consistent across multiple platforms, which made coding easier. It also made it simpler to add advertising overlays (especially before CSS3), and it was also a popular mechanism to distribute viruses.
In November of 2011, Adobe stopped development of and licensing of the use of Flash on mobile platforms, citing that HTML5 makes the primary uses for Flash obsolete. There is no version of Flash for iOS, or new or future versions of Android.
Adobe further indicated that they will be phasing out Flash plug-in support as well (such as the plugins used in Desktop web browsers), instead aiming to make Flash applications stand-along applications running on the desktop. No time table for that has been set, though they've just recently phased out Linux development. However, Flash is being actively developer for native applications and Adobe makes Flash Builder and AIR that allow you to make native applications for iOS and Android using the Flash development tools.
With regard to video formats... iOS natively supports MPEG-4 and various profiles thereof, and it supports the use of the HTML5 <video> tag to embed video in pages and in applications that leverage the WebKit environment to implement their UI. There are also apps that display other video formats.

HT1212 Hi, My IPAD has been disabled and says try again in 22,641,304 minutes and when I go into ITUNES there is no window to open the IPAD with a password. How do I enable my IPAD as I have also moved to a new MAC from my old Lenovo that the IPAD was ori

Hello,
My IPAD has been disabled as I lost it in the office and it was just recently returned to me. It says on the screen that IPAD DISABLED and says please try again in 22,641,304 minutes. Can you please advise how to enable this as the computer I am using now (MAC RETINA) is not the original computer that the IPAD was synced on.
Thanks

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
Also, see iTunes- Restoring iOS software.

HT1212 my kid brother entered the wrong pin on my ipad and now it is disabled and i was told to connect tt itunes for restore but every time i do that it tells me to update the ios but i have downloaded the new ios 7 on my ipad 2 and i also have the soft

my kid brother entered the wrong pin on my ipad and now it is disabled and i was told to connect tt itunes for restore but every time i do that it tells me to update the ios but i have downloaded the new ios 7 on my ipad 2 and i also have the soft copy of the ios on my windows pc. please how can i reload my ipad

Try using recovery mode
Recovery mode - Support - Apple

It is asking me for a password when I want to update my ipad, it has never done this before. I thought it ment my Apple ID but it didn't work and my ipad is now disabled. What should I do ? Is there a way of getting my password sent to me ?

It is asking me for a password when I want to update my ipad, it has never done this before. I thought it ment my Apple ID but it didn't work and my ipad is now disabled. What should I do ? Is there a way of getting my password sent to me ?

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Windows 8 freezes while I try to watch online Flash content and running Audition CS6

I recently bought a online introduction course to Auditon CS6 on Vimeo.com
While I have a setup where I put the lecture on one screen and the program on the other I like to follow tutorials and learn how to use software.
However this proves to be impossible for me in Audition, because for some reason my computer gets completely unresponsive after a little while of watching the lectures with Audition running.
It never happens when Audition hasn't been launched, and I'm kind of suspecting a driver conflict, but I don't have a fancy audio card in my computer, (just built in Realtek,) and find it a bit
odd that it wouldn't be supported as it is some of the most common audio setups around. As far as I know the system runs stable with Audition running and no Flash content started as well.
This has happened for the last couple of months and I've updated Flash and drivers as they roll out. Audition CS6 is downloaded with the Creative Cloud application Manager.
Here is some general info on my computer:
OS: Windows 8 Pro 64 bit.
Motherboard: eVGA x58 Classified (Tried with stock BIOS and also updated to new BIOS)
Audio Card: Realtek (on motherboard)
Graphics: Nvidia Geforce GTX 560 Ti
The system storage device is a SSD (Firmware recently updated due to BSODs apearing, and seems to be resolved.)
I do believe that this might not be a Audition issue, but rather a issue with Flash. However Audition + Flash reproduces this problem faster than anything else I can remember this happening while
using other 3rd party software while playing Flash. (Not exactly the type of software.) I have a suspicion that it is something that occurs if Flash and other programs is paging/wiring/reading the SSD...
I can't remember this happening with Photoshop or other Adobe software, and so I'm also curious to how different Audition runs "under the hood" so to speak. What is it constantly checking
that could lead to a hardware conflict.

A month ago I uninstalled AVG Internet security from my computer making it a lot less potent to BSODs in general, (can't reacall having any.) So today I thought I'd try to learn some more Audition. I could Sit with it for a good while just playing around with recordings and settings and my system didn't react weirdly at all. So the next step was of course to try and load some of the Udemy lectures I had waiting.
As the video was buffering I turned away from the computer for a while, but when I came back it had completely froze up again... I don't think I've ever had a BSOD in this context either, instead of going into BSOD the computer just stops responding completely.
(I'm using the latest version of Flash, tried with both Firefox and Chrome.)
I'm thinking this is a very niche bug and I can't seem to se that it can be anything but a conflict with Flash. Weither it's a memory leek or what ever it is.
I can use Audition fine on my computer it seems, as long as I never start a browser in risk of loading a Flash application, (which would be fine if I was avid, but I need some lectures to get started.)
Nothing really seems to be overloaded (RAM/CPU) before the freeze ocurs either.
I don't really know where or how to adress this to the Flash Player forum/community, (or if there is one.)
Thanks.

HT1338 Hi everybody..i have an enigmatic problem since i bought MacBook Air..i can't watch youtube videos and i did install the latest adobe flash player BUT when i start to install it the system keeps asking me to enter a password ? which password i need

Hi everybody..i have an enigmatic problem since i bought MacBook Air..i can't watch youtube videos and i did install the latest adobe flash player BUT when i start to install it the system keeps asking me to enter a password ? which password i need ??????

Your admin account password.

Watched ipad flash and disable itself

Similar Messages

Maybe you are looking for