Watching a tv program while it's still recording

Hi is it possible to watch a tv programe while it's recording.
For example if the progame starts at 9.00pm and finishes at 10.00pm and I get in about 9.30pm can I start watching the program or do I need to wait for the show to finish before I can start watching

You can also fast forward anything you don't want to watch (eg adverts) and catch up with the live broadcast if time permits. (I assume that applies BT boxes but not absolutely sure as I use a separate recorder; someone will say if not.)
You can click the white star next to this message if you think it was helpful.

Similar Messages

DVR automatically resets watching a recorded program while its recording

Three times now I've been watching a recorded program while the DVR was recording another program. The DVR reset itself over and over again so I lost whole chunks of the recording. The first couple of times this happened it coincided with my hitting the fast forward button. The last time it seemed to be related to a time conflict because the DVR was recording two programs at once. I called Verizon tech support each time and the only solution they've offered is to do a "soft boot" resetting the box again. Anybody else had a similar experience?

Nope.

I have a Macbook pro mid 2011 and just bought the Apple TV. While watching program or movie from any of the apps such as Watch ABC, the program keeps stopping and starting constantly.

I have a Macbook pro mid 2011 and just bought the Apple TV. While watching program or movie from any of the apps such as Watch ABC, the program keeps stopping and starting constantly.

That would indicate a network issue.
Reboot ATV and router
Make sure DNS is set to auto
Ensure router is up to date, if on wifi try ethernet
Go to istumbler.net to get a report of the network, look for signal strength and noise

HT5731 can I begin watching a movie on itunes while it is still downloading?

Can I begin watching a movie I just rented while it is still downloading?

I believe that you should be able to, but if you don't have a fast Internet connection, the movie may pause while it is still being downloaded.

While watching a live program my voice keeps going off and on

while watching a live program, like the news, the sound keeps going off and on sometimes takes a long time to come back on?
I have checked my connections and they are secure so I would appreciate a little help with this, I am not a very smart computer person so have patience please.

Make sure the manual of the monitor says it supports the frequencies you are choosing.
Make sure the amp in use by all devices plugged in does not exceed the amps your circuitbreaker/fuse supports in that portion of the house.

Quantum TV - Skip Ahead does not work when program still recording or when time shifting

I've always used skip ahead (set to 30 secs) to jump over commercials etc. Since "upgrading" to Quantum, the skip ahead button does not always work. I've narrowed the problem down to when the show you're watching is still airing (i.e. not done recording). The skip ahead function seems to work for a while until you reach a certain point in the program, then instead of skipping ahead, it jumps back to some earlier spot in the program. When this problem occurs, this earlier spot is always the same spot. To get around this bug you have to remember not to use the skip ahead button (easier said than done) or you're forced to fast forward back to the spot you left off. So once the problem starts you have to use the Fast Forward button to skip ahead.
Is this a known issue? Is a fix in the works? Very frustrating indeed.
Other gripes I have are covered in other posts...such as the laggy remote controls.
Thanks
Solved!
Go to Solution.

People have reported that the skip issue is fixed in the latest level of the Verizon code sent out on 9/11, and Verizon has also said it is fixed. Are you sure you still have the problem? If so, I suggest you check to see if you have the latest software:
Release: 1.0b
Build Number: 02.18.2
User Interface Version: 02.18.1
Middleware Version: 02.18
Firmware Version: KA12.37.03.04Alder.408758
I have not experienced the skip problem on the new software level, but I have only done the skipping once on a program still recording so that is probably not a good test.
I also do not really see any laggy response very often. Yes at times the box seems to just stop and take a deep breath or something for a couple of seconds, but overall the responses to commands from the remote have been getting better with each software upgrade (I have had 6 software upgrades I think since I got Quantum TV in early April). And I know Verizon has been working to improve the performance. Question: have you turned off the box and pulled the power plug for 15-20 seconds, then reconnected the power and let the box reinitialize? Some people have reported that doing that improves the remote performance (I have not had to do that).
At this point I really do not have any issues with Quantum TV at all, but then again I have a pretty simple setup, no sound system for example, and I never use any Widgets or VOD, which some people complain about. I have my setup to watch TV, and record programs to watch later, the rest of the functionality is really of little or no interest to me.
Justin
FiOS TV: Extreme HD, Internet: 50/50, Digital Voice
VMS Enhanced Service: 1 server, 2 clients
Keller, TX 76248 (VHO 1)

FCPX Export issue. Item cannot be shared while it is still referencing media on the camera

I am having issues with exporting a project I just shot and I missed my delivery day and am now late. Need help ASAP. I'll try to keep this as brief as possible and stick to the pertinent information.
The Shoot: -2 Panasonic HVX-200's shooting on P2 Media shooting a live event -Dumped footage onto external hard drive via Macbook Pro on set into separate folders for organization using a Panasonic P2 Reader. -All dumps were confirmed completed and all footage accounted for.
The System: -Using Final Cut Pro X 10.1.2 -Mac Pro Tower 2009 quad core running OSX Mavericks 16gb Ram -Blackmagic Intensity Pro Card
The Edit: -2 Camera multicam edit -Imported footage using import media function -Imported from external drive -(important note: a camera has never been connected to the computer for this project) -Edit is finished, about a 2hr 20 min finished sequence (live event 2 cameras switched in post, all graphics and everything is done)
The Problem: -When I go to export via the "Share" function i get an error that says "This Item cannot be shared while it is still referencing media on the camera" -Imported footage has the camera logo in the corner meaning that it is referencing camera media; yet no camera has ever been connected.
Solutions I have tried: -Re-importing media with re-import function --Says that the camera is not connected yet I never had one connected in the first place. -Deleting preferences -Biting the bullet and starting from scratch to do a re-edit -- footage will not import without referencing "camera media" -Tried importing via dragging and dropping. Says it cannot importing the following files, lists all of the XML and MXF files -Started a new event, with a new project, with a fresh import; same results -Googled this to death, no solution seems to work, but I'll try whatever I have to; client needs this ASAP.
Questions: -The external drive is not showing up as a camera, so why is it importing as camera media? -Is there a way to salvage my edit and get it exported? I have a lot of hours into this and quite frankly, no time to redo the whole thing.
Please help!

I have had this issue too, and figured a work around. FYI, I rebooted, tried everything imaginable, and still no luck. I opened up iPhoto, and imported all the video clips into iPhoto. I then took the missing video from iPhoto, copied it to my desktop. Then I re-imported the video (same name) into Final Cut. I had to do some slight editing of the video, but everything worked fine, and allowed me to upload the video to YouTube.
Not certain it will work for others, but to recap, try to import the video into another program, then copy the missing video file to your desktop, and re-import to Final Cut.
Hope this helps.

Ive had Lightroom 4 for a while, but I still have Lightroom 2. How do I transfer all my data from L

Ive had Lightroom 4 for a while, but I still have Lightroom 2. How do I transfer all my data from Lightroom 2 to Lightroom 4?

http://tv.adobe.com/watch/whats-new-in-lightroom-4/lightroom-4-develop-module

Why can't I no longer watch movies from iTunes while they are downloading?

Why can't I no longer watch movies from iTunes while they are downloading?

Videos and movies purchased from the iTunes Store are by demand of the content owners copy protected and cannot be edited, regardless of what the software is you attempt to use. There is nothing anyone here can do to help you with that. If you need to be able to edit videos, you'll need to purchase and import the DVD - such importing is despite the content owners' efforts still legal for class use (as with any copyright issue, confirm fair use issues with your district's legal office) though we can't discuss methods here - which you'll then be able to edit.
Regards.

How can I sign up with Enterprise program, while I have an active membership of the iOS developer program?

How can I sign up with Enterprise program, while I have an active membership of the iOS developer program?
I have bought a memership for the iOS Developer program.
I have created an in-house app.
Now I want to publish it to all employees without registering the devices.
So..
I go to their website and try to sign up for the enterprise program, image shown below:
http://s29.postimg.org/q06ylh5o6/Clipboard01.jpg
Within the image above, I click continue...
http://s14.postimg.org/46lqcpy74/Clipboard02.jpg
Then I am taken to the image above, there I need to select a program, but I already have a program, the iOS developer program! And the checkbutton of that program, is disabled. If I try to click continue at this page, without sleecting a program, a javascript-box shows "You have to select a program before continuging"...
Do I need to unsubscribe my iOS developer program, to then register it again? Lol!
PS: no clue where I should post this, looked over the forums and could not see anything related to singing up, registering for a program...

Our apps came offline automatically shortly after this as iTunesConnect thought we had not renewed our license, even though we had several weeks ago.
We had a brief panic as our apps were offline for 12 hours, which is how long it took Apple Support to work out what was wrong and hook things up.
I suggest you contact them ASAP to get this fixed so you don't get that iTunesConnect alert to your phone 'Your app status has been changed to Pending Contract'.

Windows Vista Home ( with SP2) constantly reporting that Safari 5.1.2 has crashed ( usual Windows prompt to close program) yet Safari is still running although loading pages slowly. Any one seen this recently ( note no recent install or changes to Windows

Windows Vista Home ( with SP2) constantly reporting that Safari 5.1.2 has crashed ( usual Windows prompt to close program) yet Safari is still running although loading pages slowly. Any one seen this recently ( note no recent install or changes to Windows

Windows reports that Safari stopped working . Windows Task Manager shows webkit2webprocess.exe process still running even after I respond to Windows prompt and close Safari ( Safari continues running after this action )

Why does IE8 running on XP and Win7 Virtual Machine deletes the history while I'm still browsing the same site with client-side hashbang routing?

Hello,
I have a asp.net mvc 5 web application running on .net 4.5 hosted on my local windows 8 machine on macbook pro using parallels. I'm running Internet Explorer 8 Version: 8.0.6001.18702 running on XP and Version: 8.0.7601.17514 running on Windows 7 Enterprise.
I've got both of the virtual machine source from www.modern.ie
My web application is attempting to provide single page user experience by having some client-side routing by using '#!/xxx' hashbangs in the url so that I can get and post via ajax and change the hash in the url without causing the page to reload. My
code works fine in IE9+ and other modern browsers.
However, I'm facing this strange issue in both of the IE8 versions. When running my demo app in IE8, I can login, view home page and can navigate from this home page to many details page. From the very first login page, all the pages are the result
of form's post action via ajax which then expects html from server and loads in the DOM. The page structure of my app is like summary form => Details page (can also contain summary forms) => Details...so on.
The above process works fine for few of the navigation steps. If I keep navigating from one page to another & go back, I have observed that the browser back button is removing the history items slowly. And a time comes when it totally forgets about
all the history pages that I visited to reach this current page I'm viewing!! It treats like I have just started my browsing session and this current page is the first page I've landed on with no back option. Now if I again try to navigate, I have encountered
problems like both the back and forward buttons gets disabled.
Hope, my words above is clear enough to explain this problem. The same application works fine in IE9+ and other browsers.
Till now, I have tried following steps on both VMs:
Resetting IE8.
Increasing disk space to 1024mb for temporary internet files storage.
Setting 'Never' for Check for newer versions of stored pages.
Disabling the automatic crash recovery feature didn't helped in this case. Found this on support website.
Deleted temporary files, history, cache, etc many a times.
Search many forums, posted question on StackOverflow, ASP.NET
Forums - but didn't helped.
Tried 'beforeunload' event of browser to see if any of the page is reloading because of submit or any other reason. But the page doesn't reload at all.
The issue is browser forgets about the browsing history while I'm still browsing the same site.
Is there any possible fix for the issue above? Does IE8 have any issues as many ajax form post is happening on every page?

I have really tried many things to identify any possible reason of the issue above. Even rewrote all my javascript navigation code and checked server-side code.
But the only place where I got the solution is at site: http://www.enhanceie.com/ie/bugs.asp which states that there is a bug in IE8 which reads like:
IE0012: IE Travellog broken when navigating back/away from a page with
a large POST form If there is a form input field with a value longer
than 523,659 characters, when you navigate away from the page, IE may
clear the current session's travellog (similar to history), disabling
the back and forward buttons. Repros in IE6 & IE7.
There are following solutions that you can go for:
- Check for the input field that has lots of characters as mentioned above and solve your problem.
- If you have control over the system where IE8 will be used, you can add the following registry key on that machine. There is no existing key, so, you need to add a new one:
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\TravelLog] "MaxSize"=dword:ffffffff
I am really relaxed to find this information as I spent really long time to solve this issue. Hope this will help someone.

For no apparent reason, the printing from the iPad to the HP wireless printer was no more possible, while it was still possible from the iPhone.

For no apparent reason, the printing from the iPad to the HP wireless printer was no more possible, while it was still possible from the iPhone 5. Any idea why?

Gutenprint drivers are intended for non-laser printers. HP supplies the proper drivers, and you can download the latest version directly from HP's support site. Or you can install the most recent HP drivers provided by Apple.
Printing speeds do not include the time it may take to transfer data to the printer. It also doesn't take into account the time it takes for the printer to be prepared to start printing. Color is much slower than B/W.
Contact HP for any additional assistance you may need since these forums do not provide support for non-Apple products.

I bought an iphone from Egypt, and i ahad a problem in the hardware while it is still in the warranty period , so can i replace it from USA

I bought an iphone 4S from Egypt, and i ahad a problem in the hardware while it is still in the warranty period , so can i replace it from USA

iPhone warranty is only valid in the country of origin.
You could try taking it to an Apple store and see what they offer.

Mozilla does not pass correctly greek letters from mailto command to email program while IE passes them correctly

I am using windows xp greek with greek regional seetings and when I run a javascript using mailto command (either with utf-8 or iso 8859-7 encoding) , the subject and body of the message which were in Greek do not pass correctly to my email program while in IE pass correctly. Can you help me because many of the users who run the javascript are using mozilla firefox

Hi Nancy, nice to see you again. The CSS validator showed no errors.
The HTML validator showed irrelevant errors, e.g., missing alt tags and also the prefererence for using UTF-8 encoding instead of the older iso-8859-1 used throughout my website (because it displays better in DW 5.5).
The CSS validator link is quite useful, as I don't have a CSS validator in DW 5.5, unless I am missing something. For HTML validation, I can use "Shft-F6".

Watching a tv program while it's still recording

Similar Messages

Maybe you are looking for