Water damaged iphone 4, stopped working after two year , the water damage

2 years ago my phone went for a wash in washing machine, I managed to dried it up and make it work , recently the display went off while using, after charging i could see it in itunes, it kept beeping every 15 second while plugged in for charging. Then i decide to open it romove the battery and put back on nowit has no life in it if i plugged it for charging or to pc it get hot quick but won't turn on, tried the home button , power button 10 second role but no luck
...all i need to know if I want to replace any parts what parts I should replace. as the phone is pretty good condition. now the question is wether it need lcd, battery or logic board changing?
i would think as it was all working , either one of there:
battery, logic board and lcd (digitizer) might need changing?
and it might work?
any suggestion on this will be appreciated.
its a 16gb iphone 4 black.

We can't advise you on attempting to repair it yourself. Apple does not sell iPhone parts at all. The only sources for iPhone parts are:
Stolen parts
Counterfeit parts
Salvaged parts
Since you opened it yourself, Apple won't touch it now. Find a competent 3rd party repair shop or buy a new phone.
If you really want to try fixing it yourself, look to someplace like ifixit.com for advice.

Similar Messages

My iPhone 3GS stopped working after one year one month, and is totally unresponsive.

I went to plug my phone into my stereo as I do daily and it just stopped working. Totally unresponsive.

Charge it for 30 minutes with a wall charger, then disconnect and hold the HOME and SLEEP buttons until an Apple logo appears, about 10 seconds.
BTW, it's a holiday in the US and UK, so amazingly enough, many users are out enjoying themselves, which is why you didn't get an instantaneous response. Even then expecting an answer in less than 30 minutes in an all volunteer forum is optimistic.

Extensions like Ghostery, WOT or AdBlock stop working after two or three times. Restarting the webpage in a new tab the extensions will work again for several times and then stop again. Has anybody an explanation or a workaround for this bug in Safari 5?

Extensions like Ghostery, WOT or AdBlock stop working after two or three times. Restarting the webpage in a new tab the extensions will work again for several times and then stop again. Has anybody an explanation or a workaround for this bug in Safari 5?

Remove the extensions, redownload Safari, reload the extensions.
http://www.apple.com/safari/download/
And if you really want a better experience, use Firefox, tons more choices and possibilities there.
Firefox's "NoScript" will block the Trojan going around on websites. Best web security you can get.
https://addons.mozilla.org/en-US/firefox/addon/noscript/
Ghostery, Ad Block Plus and thousands of add-ons more have originated on Firefox.

TS3048 My wireless mouse has stopped working after I recharged the batteries,the green light does not come on. I swapped the batteries from the mouse to my wireless keyboard and they work fine in the keyboard.

My wireless mouse has stopped working after I recharged the batteries,the green light does not come on. I swapped the batteries from the mouse to my wireless keyboard and they work fine in the keyboard.What can I do?

Hello:
Try resetting the SMC and PRAM.
Barry

WIFI stopped working after I woke the computer up, now says connected to the network but not the internet, all other coputers and devices connected still with no problems, have pinged IP address from router and got the message "4 packets sent none receive

Hi,
WIFI stopped working after I woke the computer up, now says connected to the network but not the internet, all other coputers and devices connected still with no problems, have pinged IP address from router and got the message "4 packets sent none received"... Help
I have tried network diagnostics which doesnt help... The only other ting is, when I woke the computer up it said tat another device was using my IP... My wife had plugged her phone into the computer to charge etc but even when i turn wifi off on the phone there is no change... also in settings on the phone the IP address is different...

The answer to your question is - neither!
Your PC should to configured to obtain an IP address automatically, and to obtain DNS server IP addresses automatically, from the Airport Express. This is the way Windows (and Macs for that matter) are configued by default, and that is the way most people have their computers set up. If you manually configured your PC's IP address to be the same as your wife's Mac, it certainly explains why your PC is not able to access the internet.

"A problem caused the program stop working," after I accepted the TERMS and Conditions for Adobe Reader 11 installstion. What I need to do next? Thanks.

"A problem caused the program stop working," after I accepted the TERMS and Conditions for Adobe Reader 11 installstion. What I need to do next? Thanks.

Thanks for your reply. I did get upgraded to 10. something. Not on that computer now. 11 is not supported on Vista
Pat Willener <[email protected]> wrote:
Pat Willener created the discussion
""A problem caused the program stop working," after I accepted the TERMS and Conditions for Adobe Reader 11 installstion. What I need to do next? Thanks."
To view the discussion, visit: https://forums.adobe.com/message/6442262#6442262

Iphone 5 stopped working after updated to IOS 7.1

I have just updated my iphone 5 to IOS 7.1 and unfortunately it stopped working. I can not turn it on. Anyone got the same problem? My phone is already out of warranty so I have no idea how much it would cost to fix my died phone

My sons iPhone 5 did the same thing after updating to iOS 7.1.
You may have to connect the device to a computer running iTunes and do a restore on the device. Restore as new. If you don't have a backup everything will be lost but you may get the device working again.
http://support.apple.com/kb/ht1414

My iphone-4 stopped working after updating it to iOS 5

I tried upgrading my i-phone 4 to the new oerating system iOS5 and now it stopped working. it says connect to i-tunes and when I tried doing it my pc does not detect I-phone. can anyone help?

Same as I posted to another user:
well I only have a 3gs so I'm not all up on the current but the way I see it you have a few option's depending on the route you want to take,
If you don't mind loosing what's on the phone (if you want to try save info try 2 before 1)
1. (Best Chance) put the iphone into DFU mode, (1. turn off iphone while plugged into computer, then hold the sleep button count to three 2. then hold the home button whiile still holding the sleep button, count to 10 3. release the sleep button but keep home button,) then itune should detect the phone and offer to restore it, this should restore it
1b. I would repeat above with a active SIM card, doesn't make a difference where I live but you never know
I'd suggest this if your having problems connecting
1c. I would try On difference Computer (rule out bad download, currupt driver's etc etc)
If you want to try save the information then I would say you are doing some of this at your own risk as I'm not sure about apple rules regarding these, the steps should all be legal but might void your warrently so be warned!
2. Download a utility call Tinyumbrella ( http://thefirmwareumbrella.blogspot.com/ ) and have you phone connected and run the program, on the left should be a list of connected devices (make sure itunes is closed) click on the device connected and on the right click exit recovery, hopefully your device will reboot normally, (there's also an fix recovery option but I've never used that)
2b this option is to jailbreak your phone as that "hacktivates" your phone if using this option and it works I suggest a FULL backup then follow option 1 above, download a program call Redsn0w ( http://blog.iphone-dev.org/tagged/redsn0w ) and follow the instructions that come with it, again if this works I suggest a full backup then follow option 1 about even if you do wish to stay "jailbroken"
this advice is just some idea's as you have given no information on what happen or firmware involved current mood of phone ^^ I can only hazard a guess at the problem< if after these steps is doesn't work i suggest trying to bring it back and get someone professional to look at it

Iphone sound stopped working after ios 6.0 update

My 4s was working fine until I updated to 6.0. After that, my sound stopped working. If I plug in headphones it works, but as soon as I unplug it stops. When I plug into my USB sync cable it works, but when I unplug it stops working. I updated through user settings over wifi and not through itunes sync if that makes any difference. I know other people are experiencing similar problems. Any help would be appreciated.

Yes rev, I tried the dock cleaning as well, I didn't help me either. I read and tried everything others did-no luck. I'm guessing these are the facts, either it will quietly get fixed on an update or the % of phones with the problem compared to those that don't doesn't warrant attention and is better addressed through Apple by just replacing it..if it's still under warranty.

Tablet stop working after two months

Dear Sir/Madam,
I am using a tablet Seriel Number: <Personal Content Removed> in Cambodia and did not work over two weeks (Can not turn on) after buying over 2months from Sanfrancisco, USA. I would like to send back your repair center, so could you tell me where should I send from Cambodia? you can contact me<Personal Content Removed>
Look forward to your reply soon.
Best regard,
Mao

Sunmao wrote:
I would like to send back your repair center, so could you tell me where should I send from Cambodia? you can contact me<Personal Content Removed>
Try what has been recommended above.
This is a user-to-user community support forum. We are not RIM employees, but volunteers who enjoy assisting other users. RIM personnel rarely comment on queries posted here.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

My Zii Sound D5 stopped working after one year

Hi there,
After one year of enjoying my beloved Zii Sound D5 it stopped working with any apparent reason. It just does not switch on.
I dont have any technical knowledge but after reading a few messages in the forum my guess is that the problem is related to a power spike.
Can anyone help?
Thanks

Tobago82,
Have you tried plugging the speaker to another power outlet? If you have not done so already, please contact our Customer Support for assistance.

IPod Mini Stop Working After 1 Year ?

I've heard rumours that after a year of having your iPod Mini that the battery will stop working.
I have had mine just under a year and The Battery is starting to play up.
Can you please tell me whether the rumours are true and how I can fix my iPod.
Thanks

Alistair,
If your iPod battery play time is really that bad, then my advice to you would be to send it off to Apple before the warranty runs out for a battery replacement.
Fill out the service request.

Hdmi sound on my mac mini has stopped working after I upgraded the OS

I just upgraded the iOS on my Core i5 Mac mini to 10.8.5 and my hdmi sound on my monitor stopped working. I have tried rebooting and adjusting the Audio midi settings and nothing seems to work. I know the mac mini speakers are working and the monitors speakers are working. What do I try next?

Resetting the NVRAM / PRAM, as per > About NVRAM and PRAM
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6. Release the keys.

Hyperion Reports Scheduler stopped working after 4 years of reliable servic

Hello,
I'm puzzled by this, but today at 4:00 AM, the scheduler stopped working. I tried to manually restart the service to no avail. I rebooted the server, nothing. I reinstalled Reports (but selected retain configuration), yet nothing. I'm perplexed as this has been working without issues for 4 years. Next step is to check whether the IT group did a patch upgrade of the OS and may have caused this.
If anyone has an idea, pls forward. Many thanks.
Here's the content of the log file:
10-29 04:06:48 INFO JobServiceThread     Batch "Station Reporting\2006 MOR" finished at Oct 29, 2008 4:06:48 AM
10-29 04:06:48 INFO JobServiceThread     Detail status : Batch "Station Reporting\2006 MOR" was started at Oct 29, 2008 4:06:31 AM
Problems encountered in "Station Reporting\MOR\2008 MOR"
ADM Error processing results from query: 1
Batch "Station Reporting\2006 MOR" finished at Oct 29, 2008 4:06:48 AM
10-29 04:23:06 INFO SchedulerServerLauncher     Hyperion Reports 7.0
10-29 04:23:06 INFO SchedulerServerLauncher     Copyright(C)2000-2004 Hyperion Solutions Corporation
10-29 04:23:06 INFO SchedulerServerLauncher     All Rights Reserved
10-29 04:23:23 ERROR SchedulerServerLauncher     Error while starting Scheduler Server

schedule.xml must be deleted if it reaches 8 megs. Surprised that Hyperion did not come with something more intuitive.

My magic stopped working after I updated the system to Windows 7 SP1

It all goes well under the Mac OS X 10.6.
But,to Windows 7, the partial function went down after I updated the system.
Here's my problem.
The function of rolling in the middle area of Mouse didn't work.
I've tried to reinstall the Bootcamp 3.1, but nothing help.
So I wonder if there's anyone who can help me out.
P.S. Poor English, expected that you can understand.

Did the Windows 7 disc have SP1 on it or did you download it from Windows Update/Microsoft site. I had Windows 7 64-bit on my system and I went to the Microsoft site to download SP1 and then installed it (I had issues in the past on different PC getting service packs to download and install from Windows Update). After it installed Windows was fine I had no issues. When I was finished with using the system for the day I went to Start>Shutdown to turn it off. Then the next day I turned it on and booted into Windows and it asked for my password. I went to type it in and nothing showed in the box. I went to use the built-in mouse in the MacBook Pro and it would not move. This had happened after I redid the entire hard drive (Mac OS X and Windows) after having some other Windows issues I was having. After I found out the issues were not on the Mac OS X side I put Windows back on and the drivers for it that was on the Mac OS X disc and used Apple Software Update for Windows to get the 3.2 drivers. I don't think Apple systems and Windows7 using SP1 is compatible. If you are able to in some way or form to go to Control Panel and view the installed Windows Updates, click on the one for Service Pack 1 and then click on uninstall and remove it. I take care of the updates on another system for someone else on an HP using Winsows 7 64-bit and after what happened to me I am not putting Service Pack 1 on theres.

Water damaged iphone 4, stopped working after two year , the water damage

Similar Messages

Maybe you are looking for