Water damaged ipod nano 7th gen.

I washed my ipod nano 7th gen. in the washing machine and it wont turn on. I tryed plugging it in to the charger and still wont turn on. Any help could help.

Charging it while still wet will cause damaged to your nano. Try what deggie said.....
You can try putting it in a bowl of raw rice for 4 to 5 days, charging it for a half-hour then resetting it while it is on the charger.
I done this trick a few years ago with a 5th generation nano. It turned back on.
Message was edited by: keeferaf

Similar Messages

Water damage iPod Nano 7th Generation?

My iPod Nano 7th Generation was in very good condition and it just went through the washer 3 nights ago and I plugged it into the charger and it would turn on but the touch screen wouldn't open the music or anything and the screen looked like there was water in it and it went very slow. How can I fix it or something? I cant buy a new one because it would be too high price and I can't get one either because Im 1 year away from being able to have a job. So how can I fix this or something?

Well if it's just the screen i'd try eBay, but it sounds like it has internal damage because you mentioned it is slow. You either would have to replace everything inside, or buy a new or refurbished one.
4

After upgrade to Windows 8.1, ipod nano 7th gen not recognized

/after upgrading to Windows 8.1, ITunes does not recognize my ipod nano 7th gen. I have uninstalled and reinstalled ITunes but no luck. I have gone through all steps in troubleshooting, but it still doesn't recognize it. Help!

Hi cindywindy,
If your iPod Nano is no longer recognized in iTunes after a recent system upgrade, you may find the following article helpful (apologies if you have already seen it):
Apple Support: iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Regards,
- Brenden

I recently purchased a bluetooth headphone set that I have been able to pair to my iphone6 , but it is not showing up on my ipod nano 7th gen, anyone else had a similar problem ?

anyone had trouble syncing a bluetooth headset to an ipod nano 7th gen ? I was able to sync to my iphone6 , but no luck with the ipod, even after a reset & several attempts

THanks for the suggestion deggie , but I have already tried this without any success. I just mentioned pairing it to prove that the headphones weren't defective. I also tried reaeting the ipod through itunes hoping that might help , but still no detection on the ipod

Is there a way to listen to radio on iPod nano 7th gen with Bluetooth headphones?

I know the iPod nano 7th gen uses the headphones as an antenna. I know there will need to be some sort of antenna attached. Does anybody know if there is an antenna on the market that can be plugged into the headphone jack that will allow audio to be sent to a pair of Bluetooth headphones?

There is currently no such antenna available.
B-rock

Ipod nano 7th gen not turning on or connecting to laptop??

My son's ipod nano 7th gen won't turn on and when I connect it to the lap top a message comes up saying device driver not recognised - he was listening to it just last night, can anyone help? He's only had it since his birthday in November.

I reset the ipod by holding down the power button and the menu button and the apple screen came up after a few moments - this seems to have done the trick!

IPod nano 7th gen (brand new) doesn't recognize Headphones

I have a brand new iPod nano (7th gen), and it doesn't detect when headphones are plugged in. I have read that the problem can ocurr because the headphones are not correctly inserted or that the headphone jack has dust inside. As i always do on a regular basis with mp3 devices, i cleaned out the jack to be sure
This is what happens:
When music is not playing i hear a crackle pop sound every 2 seconds or so. My headphones are perfectly fine and work with my Samsung galaxy s4 and my old iPod touch, and my brothers iPhone. Just don't work with iPod nano. I have 3 pairs of headphones all which do not work but I do not have the original headphones. they are so uncomfortable and seems unfair to me that apple would have a one size fits al headphone that only works with the device. I do not intend on switching.
When I play a song, and then press the sleep/wake button to turn off the display, the music stops. Or if I let the music play, it stops when the screen times out and turns off. These two things occur because the iPod "thinks" that there are no headphones inserted.
When I try to activate the FM radio, the radio won't start because it says that there is no radio signal (which occurs when no headphones are connected).
Needless to say, the microphone and volume controls of the iPhone headset, don´t work at all (they even work on the iPod shuffle!).. and because of this, no voice recording for me!
I have also restored the device in iTunes, and updated with no luck.....
Thanks in advance for any useful answer!
iPod nano

First, make sure the headphones plug is completely inserted into the nano's headphones jack. It should "click" into place. The fit may be tighter than expected, especially when new. There is a sensor in there, and if the plug is not completely inserted, you may get some sound, but the nano will not "sense" the headphones.
If that is not the problem, you should have the nano looked at under warranty. It should work with any standard headphones. If there is an Apple Store nearby, you can make a reservation at the store's Genius Bar and take it there.

Ipod nano 7th gen not being recognized by itunes

i have the new hp split x2 laptop running windows 8. i kept ignoring the new itunes update and everything was fine but as soon as i installed it, itunes no longer recognized my ipod nano (7th gen). i have been sitting here for about 2 hours looking for answers so now i am asking for them instead. is there a way to uninstall the last update? i would go to best buy and just have geek squad fix it for free (because im covered for 2 years) but we are currently having a massive snow storm here in NY please help!

I'm trying to put songs on it

I got a new iPod nano 7th gen., but when I tried downloading a video from my iTunes library a message popped up that said: Some of the videos in your iTunes library cannot be copied to your iPod because they cannot be played on this iPod.

I got a new iPod nano 7th gen, but when i tried downloading a video from my iTunes library a message popped up that said: Soem of the videos in your iTunes library were not copied to yor iPod because they cannot be played on this iPod. What should I do?

I kept having a similar problem - 3 out of the 10 videos I had on iTunes wouldn't sync. They were in the right format and I KNEW they worked on my iPod because I'd RECORDED them on my iPod. I finally figured out what to do! Go to the movies in your iTunes library. Click on one that does not sync. Click on "Advanced" at the top of iTunes and choose "Create iPod or iPhone version". Once that's finished, be sure you delete the old version so you don't keep getting the error (or have 2 copies of the same video) and sync. This should eliminate the problem. At least it did for me!

Does the ipod nano 7th gen work with Belkin Blue tooth In car hands free? Customer support said it did when I bought it, but the box doesn't say it does and I dont want to open it in case I have to return it.

Does the ipod nano 7th gen work with Belkin Blue tooth In car hands free? Customer support said it did when I bought it, but the box doesn't say it does and I dont want to open it in case I have to return it.

If the Belkin supports the A2DP (Stereo Bluetooth) profile then it will work.

IPod Nano 7th Gen says "Unsupported. Accessory is not supported" when trying to charge / sync

iPod Nano 7th Gen says "Unsupported. Accessory is not supported" when trying to charge / sync with official apple lightening cable.
It worked for almost a year then suddenly began to say that. My computer [windows], lightening cable and my power brick [all apple official] are all the same as they were when it was working. The iPod is almost a year old now, and has worked perfectly up until about a week ago.
I have tried resetting the iPod, plugging it into different charging sources but it keeps saying "Unsupported. Accessory is not supported"
Does anyone have any ideas on how to fix it?
Thanks.

Your iPod Nano firmware and iTunes updated to the current versions?
It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.

My ipod nano 7th gen no longer shows "Playlists" in the music menu. No changes made other than deleting one and adding one playlist to those synced. Synced fine in late February. Not working as of 3/7/2014.

My ipod nano 7th gen no longer shows "Playlists" in the music menu. No changes made other than deleting one and adding one playlist to those synced. Synced fine in late February. Not working as of 3/7/2014.

I would either say that the iOS is correpted due to a software glitch or y have have a hardware problem like bad memory locations that are corrupting the iOS.
- Restore from backup via iTunes. This will install a fresh copy of the iOS. See:
iOS: How to back up
- Restore to factory settings/new iOS device.   This will elimate corruptin in the backup causing the problem.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

IPod Nano 7th Gen. & Nike App

Good morning friends,
I am interested in purchasing an iPod Nano 7th Gen. for the fitness app but I have some queries - I've checked online and am a little more confused then when I started.
I understand that the Nike Fitness App doesn't need the shoe sensor in order to work. This is the main reason I am interested in purchasing the product; however, in the store the personnel indicated that the shoe sensor is required. I investigated this a little and now I am of the understanding that you can use the app without the shoe sensor for walking/running, but that having said sensor makes the app more efficient/accurate.
Could someone clarify this for me, and indicate which are the functions when having the iPod only or having the iPod + shoe sensor?
Thanks so much in advance!

Hello,
I have the ipod nano 7th gen. I use it without the sensor and it works fine. It is quite accurate. I have tested it by running around my neighborhood and then compared my run to Google Maps and it was pretty close. After each run, you can calibrate your distance. This will make your runs even more accurate.

IPod nano (7th gen) and iTunes have said it is 'synced' however no songs show when disconnected. Once reconnected, storage says data if fully free even though sync took place, experience of same, help?

IPod nano (7th gen) and iTunes have said it is 'synced' however no songs show when disconnected. Once reconnected, storage says data if fully free even though sync took place, experience of same, help please?

IPod nano (7th gen) and iTunes have said it is 'synced' however no songs show when disconnected. Once reconnected, storage says data if fully free even though sync took place, experience of same, help please?

How can i connect my ipod nano 7th gen to my car?

Hi, how can I connect my ipod nano 7th gen to my car with bluetooth? Since I only have onstar device on my car but no bluetooth device, do I need to buy extra device to connect my ipod ? And what kind of device I shall choose? Thank you!

Check with the manufacturer of your radio and see if they have a compatible cable.

Water damaged ipod nano 7th gen.

Similar Messages

Maybe you are looking for