Water ripple distortion top of screen

Hi,
When I have my AppleTV plugged to my crystalio VPS2300 video processor with a HD cable that came with the Crystalio, component to a VGA looking plug, there is interference/distortion at the top of the screen. It looks like small water ripples. When i have the 2 connected with component to component the distortion goes away.
I'm guessing its a problem with the cable and i should get a HDMI to DVI cable.
Can someone confirm this please, i don't know what is really going on.
thanks, marc

ok, i found the answer. It seems the component on the ATV outputs the bog-standard 480i/576i, and I was using the HD input of my image processor that takes 480p and above. So i need to get a HDMI to DVI cable.

Similar Messages

  • Best way to create water ripples effect?

    Hi, I need to add water ripple effects to an existing video, the water ripples need to go over all the subjects and the floor in the videos (so that's easy).
    The hard part is trying to find a good generator for water affects. Currently I'm trying to use the Caustics Generator in Motion along with the Underwater Filter. I added Gausian Blur to soften it. But it just looks a bit too sharp (is there any way to Anti-Alias?). I'm not exactly going for realistic, but I'd like something that looks as if the water ripple affect was created during the filming (using an effects light) and instead of post.
    Any other suggestions?

    http://www.amazon.com/How-Cheat-Motion-Patrick-Sheffield/dp/024081097X
    Enojy!
    Did I mention that the author is a regular contributor to these forums?
    He's even in the list of top users >>>>>>>>>>>>>>>>>>>>>
    Oh, Wow!

  • My iPhone 4 has water damage and a cracked screen but i have no warranty will apple still replace my phone at a cost?

    my iPhone 4 has water damage and a cracked screen but i have no warranty will apple still replace my phone at a cost?

    Yes, out of warranty replacement for the iPhone 4 is $149.

  • Any ideas on a filter to add water ripples to a font?

    Any ideas on a filter to add water ripples to a font?
    this is the example:
    http://logofaves.com/wp-content/uploads/2009/07/loc-m.jpg
    thanks in advance!

    You might try scribble
    I di this with live text two copies and two different clipping masks.
    You would group them after applying the clipping masks.

  • How do I only show typed URLs in the Top Sites screen?

    It's really obnoxious to see hundreds of ephemeral URLs that you'll never visit again on the Top Sites screen. Is there a way to make this user friendly so I can only see the URLs I typed. I am happy to set something in about:config.

    No, this is for Android version. I would love to disable the stupid "Awesome" screen. The link you posted explained how to turn the tab garbage off on the desktop version, but Mobile (i.e. Android) version ignores the parameter value.
    Likewise, the above "browser.urlbar.default.behavior" parameter set to '32' produces the reasonable behavior I want on the desktop, but the Mobile (Android) version just ignores this configuration parameter.

  • After updating to ios5 the shortcut 'tapping top of screen' to scroll back to top does not work! Is there a way to get that back?

    Since updating my ipad2 to iOS 5 the shortcut 'tap top of screen to quickly scroll back to top' no longer functions! How can I get this back?

    It still works on my iPad - is it working on any of your apps e.g. Safari, Mail, Notes, and are you touching right at the top of the screen (I've seen a few other posts implying that the area of the screen that you need to touch isn't quite as deep as it used to be) ? Have you tried a reset to see if it works after the iPad has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Why does my Lightshop 5.6 hangs on opening with "not responding" at top of screen.

    I managed to use the programme for the first time after original install. Next day it just hung on opening with the panels all their on screen but with the splash screen still centre and "not responding" at top of screen. I am totally new to Lightroom and set it up using Scott Kelby's book Lightroom 5 everything appeared to set up properly. I uninstalled the programme and reinstalled exactly same thing has happened. Is their a maximum caralog size that is usuable, mine is 2.7TB and is on one of the desktop's 3 discs.
    Advice please, thanks

    No, but try terminating and restarting Safari:
    1. Press the Home button
    2. Double click the Home button to bring up the "Recent Apps" tray.
    3. Touch and hold on the Safari icon in the "Recent Apps" tray until a "-" appears.
    4. Touch the "-" to terminate Safari.
    5. Restart Safari and see if your Bookmarks are back.

  • Just updated to 7.1 and now open some apps and cannot seethe entire screen because the iPad, time n battery icons are covering top of screen.

    Just updated to 7.1 and now open some apps and cannot see the entire screen because the iPad, time n battery icons are covering top of screen.

    I tried what you said but it still didn't help.
    It only affects some of my apps other apps are fine.
    For some reason in some of my apps the iPad, time and battery icons get bigger on the top of my screen so I can't see the top of the app page which effects some of the games and applications.
    Is there any way to turn these icons off on the top of the screen?

  • Dashboard Links At the top of Screen visibility

    Hi,
    When I enter as a Presentation Catalog Administrator to Answers, I can not see the some dashboard links at the top of screen. But I have access right to enter them.
    Is there any configuration about the visibility of the links of dashboards at the top of the screen.
    Thanks.
    Edited by: user10137960 on 02.Ara.2009 05:16

    As Administrator Go to Setting - Administrator - Manage Interactive Dashboards.
    Choose a dashboard that you are not able to see and click on the permissions button. Check if the Presentation Server Administrators has Full Controll access to the dashboard. If not, try adding it.

  • No battery percentage at top of screen.

    Why dosen't my iPad 2 no longer show battery percentage at top of screen.

    Go to Settings>General>Battery Percentage and make sure it is set to ON. If it is - reset your iPad. Hold down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple logo appears. Ignore the red slider.

  • Wheb U first downloaded Firefox there was a toolbar at top of screen. Now it is gone. How do I retrueve it?

    When I first downloaded Firefox there was a tool bar at top of screen with print, yahoo and other items. Now it is gone. My question is this--how can I get it back?

    Hit the '''Alt''' key and release to temporarily show the Menu bar, then open View > Toolbars and select Menu bar, so it has a check-mark. <br />
    The F10 can also be used on most PC's to temporarily reveal the Menu bar.
    https://support.mozilla.com/en-US/kb/Menu+bar+is+missing

  • User-defined alert based on Top Activity screen?

    Does anyone know the query used to populate the Top Activity screen in Grid Control? I want to make a user-defined alert that will page me if the Top Activity is over a certain amount.

    Hi Bishal,
    Rather than using an alert, you could put validation code in the SBO_SP_TransactionNotification stored procedure to check for the same job number before the document is added. This is a permitted solution as SAP allow users to add their own sql code to this proc (provided it's not inserting or updating data in SBO system tables).
    To set up this solution (on a test system):
    1) Open SQL Studio Management
    2) In the Object Explorer expand the company database, expand Programmability and Stored Procedures
    3) Right-click the SBO_SP_TransactionNotification stored procedure and choose Modify. This will create an update script in the main window.
    4) Look for the following section in the script:
    --     ADD     YOUR     CODE     HERE
    5) Underneath the above section, paste the following code:
    if @OBJECT_TYPE = '17' and @TRANSACTION_TYPE in ('U', 'A')
         if exists(select DocEntry from ORDR where DocEntry &lt;&gt; cast(@LIST_OF_COLS_VAL_TAB_DEL as int)
                        and U_Jobnumber is not null and U_Jobnumber &lt;&gt; ''
                        and U_Jobnumber = (select U_Jobnumber from ORDR where DocEntry = cast(@LIST_OF_COLS_VAL_TAB_DEL as int)) )
              begin
                   set @ERROR = '9999' -- Set your own error code here
                   set @ERROR_MESSAGE = 'The Job Number entered has already been used on a previous sales order.'
              end
    6) Click on Execute and you should get a message stating that the update was successful
    7) Test adding a new sales order
    The above script will raise an error when the user clicks on Add if a job number has been specified on the sales order and that number has already been used. It will not check if a job number has not been specified
    Kind Regards,
    Owen

  • All navigational subheadings near top of screen in previous version of ff disappeared when installed ff4. they included Wikipidia, news(with sub-options LA times, NY times,BBC etc), YouTube, mail & others. how do i recover previous version?

    all navigational subheadings near top of screen in previous version of ff disappeared when installed ff4. they included wikipedia, news(with sub-options LA times, NY times, BBC etc),YouTube, mail & others. how do i recover previous version?

    You are welcome. I'm glad you got it back up.
    (1) You say you did the symbolic link. I will assume this is set correctly; it's very important that it is.
    (2) I don't know what you mean by "Been feeding the [email protected] for several weeks now, 700 emails each day at least." After the initial training period, SpamAssassin doesn't learn from mail it has already processed correctly. At this point, you only need to teach SpamAssassin when it is wrong. [email protected] should only be getting spam that is being passed as clean. Likewise, [email protected] should only be getting legitimate mail that is being flagged as junk. You are redirecting mail to both [email protected] and [email protected] ... right? SpamAssassin needs both.
    (3) Next, as I said before, you need to implement those "Frontline spam defense for Mac OS X Server." Once you have that done and issue "postfix reload" you can look at your SMTP log in Server Admin and watch as Postfix blocks one piece of junk mail after another. It's kind of cool.
    (4) Add some SARE rules:
    Visit http://www.rulesemporium.com/rules.htm and download the following rules:
    70sareadult.cf
    70saregenlsubj0.cf
    70sareheader0.cf
    70sarehtml0.cf
    70sareobfu0.cf
    70sareoem.cf
    70sarespoof.cf
    70sarestocks.cf
    70sareunsub.cf
    72sare_redirectpost
    Visit http://www.rulesemporium.com/other-rules.htm and download the following rules:
    backhair.cf
    bogus-virus-warnings.cf
    chickenpox.cf
    weeds.cf
    Copy these rules to /etc/mail/spamassassin/
    Then stop and restart mail services.
    There are other things you can do, and you'll find differing opinions about such things. In general, I think implementing the "Frontline spam defense for Mac OS X Server" and adding the SARE rules will help a lot. Good luck!

  • My CC on MAC laptop seems to have completely stopped working. my shortcut at top of screen is gone

    My CC on MAC laptop seems to have completely stopped working. my shortcut at top of screen is gone. Any suggestions?
    Thanks.

    sorry. seems to be resolved.

  • HT4865 My iPhone 5c keeps signing recording at the top off screen how do u turn it off

    My iPhone 5c keeps signing recording at the top off screen how do u turn it off

    http://support.apple.com/kb/ts3805

Maybe you are looking for