Waterfall charts to present variance details

Hello,
Our financial analysts use waterfall charts (a.k.a., cascade charts) extensively to present variance details to management. This can be done in manually in Excel.Since BO does not offer waterfall charts as a standard charting option, is there any tools you would receommend to achieve the same ?
Thanks
Priya

Hello Priya,
I haven't used this one before but they do offer a Waterfall chart type as an add in for Crystal Reports.
http://www.threedgraphics.com/tdg/products/tools/crchart/crchart.php
Regards,
Graham

Similar Messages

Error while trying to setup waterfall Chart in OBIEE 11.1.1.6.7

Hi All,
I am working on the OBIEE 11.1.1.6.7 version. This upgrade to 11.1.1.6.7 was done recently from 11.1.1.6.2 version by running the latest patch downloads using Opatch functionality.
Recently we had a requirement and I am trying to set up waterfall chart in this new 11.1.1.6.7 environment.
I added the below code snippet in the instanceconfig.xml file.
<Charts>
<EnableWaterfall>true</EnableWaterfall>
</Charts>
Then I restared the OPMN. Restart of presentation services fails with below error in log file.
13/02/07 22:56:08 Start process
[Util Logger] Exception occurred:
     Severity:5
     Type:class saw::Exception const * __ptr64
     File:main/project/webutil/configreaderinstance.cpp
     Line:558
     Message:Invalid settings in config file: Bad config instance '\\?\E:\<Middleware_Home>\instances\instance1\config\OracleBIPresentationServicesComponent\coreapplication_obips1\instanceconfig.xml'!
Unknown element 'EnableWaterfall'
Element 'EnableWaterfall' is not valid for content model: 'All(AxisLimitsFudgeFactor,AxisLimitsOverscanLimit,Bidi,EmbedFonts,JavaHostReadLimitInKB,DefaultWebImageType,CompressXMLData,Disabled,Enabled,DefaultNavigationPath,DeliveredImageType,FlashCLSID,FlashCodeBase,FlashPluginsPage,FontMapFile,MaxCompletionTimeInSec,MaxInMemoryChart,SVGPluginsPage,Funnel,Gauge,POP,SectionSliderLimit,SectionSliderDefault,MaxVisibleColumns,MaxVisiblePages,MaxVisibleRows,MaxVisibleSections)'
13/02/07 22:56:10 Start process
[Util Logger] Exception occurred:
     Severity:5
     Type:class saw::Exception const * __ptr64
     File:main/project/webutil/configreaderinstance.cpp
     Line:558
     Message:Invalid settings in config file: Bad config instance '\\?\E:\OBIEE11gODI11gMWH\instances\instance1\config\OracleBIPresentationServicesComponent\coreapplication_obips1\instanceconfig.xml'!
Unknown element 'EnableWaterfall'
Element 'EnableWaterfall' is not valid for content model: 'All(AxisLimitsFudgeFactor,AxisLimitsOverscanLimit,Bidi,EmbedFonts,JavaHostReadLimitInKB,DefaultWebImageType,CompressXMLData,Disabled,Enabled,DefaultNavigationPath,DeliveredImageType,FlashCLSID,FlashCodeBase,FlashPluginsPage,FontMapFile,MaxCompletionTimeInSec,MaxInMemoryChart,SVGPluginsPage,Funnel,Gauge,POP,SectionSliderLimit,SectionSliderDefault,MaxVisibleColumns,MaxVisiblePages,MaxVisibleRows,MaxVisibleSections)'
Restart of OPMN works fine, when this code is removed from instanceconfig.xml file.
Kindly help.

Hi SS2012,
I am also running into the same issue, were you able to find a resolution to the probelm? Please let me know
Thanks in advance. Kindly help.

Why waterfall chart is available in Xcelsius 2008 but not in 2011?

Hello there,
I used to use Xcelsius 2008 engage to create waterfall chart. But I found the waterfall chart is not available in Xcelsius 2011. I checked both Xcelsius Presentation Design 2011 & Xcelsius Dashboard Departmental 2011, both edition don't have waterfall chart?!!
why a newer version doesn't have this function?
any idea is appreciated. Thanks.
Regards,
gloria

Hi Gloria,
Dashboard Design 4.0 (Xcelsius presentation design 2011) was coded before and was in the ram-up stage from last year.
Waterfall chart was added as new component in Xcelsius 2008 SP4 which was in Q2 this year. You would see the chart present in Xcelsius 2011 next release(i.e. Dashboard design 4.1).
Hope this helps.
Thanks,
Amit

Need help in creating a Waterfall Chart

Hi,
I have a requirement where in which I need to create a waterfall chart. In this chart we need the sales value for a Brand for two years, (say 2010 and 2009) and also need to plot the growth of the various sub-brands that come under that brand. Some dummy
data to explain my scenario follows.
MAT 09
MAT 10
Brand
1400
1450
Sub Brand 1
300
400
Sub Brand 2
400
500
Sub Brand 3
500
300
Sub Brand 4
100
50
Sub Brand 5
100
200
In my chart it has to be a vertical bar chart, 1st line should be MAT 09, then the growth values should be plotted, but the axis for that will not be 0, rather start at the value of MAT09.
I am unable to paste a dummy chart here. :(
Can anyone throw any inputs as to how it can be achieved.
Thanks in Advance,
Suman Sarkar

Hi Suman Sarkar,
I am a little confused about the layout of your waterfall chart, could you please post some dummy chart here, with a clear
understanding with the issue, we could give some solution or workarounds, the steps of uploading the picture are following:
1.
Upload the picture to a website
http://skydriver.live.com
2.
View the picture in the website.
3.
Right-click the picture, and then select “Copy”
4.
In reply window, select “Paste” to paste the picture into a post.
If you have any question about the steps, please feel free to ask.
Regards,
Challen Fu

Media presentation with details help.

Hi there I am currently implementing a simple media presentation with details and I struggle to do 2 things:
1. Buffer all videos so that after they load once they play from the memory not depending on a "let's say" faulty internet connection.
2. The most important thing that I was unable to figure out is how to make the chapter details play like 15 seconds after the video ends. I mean when de video ends the chapter pauses and displays the chapter details for 15 seconds.
Any help would be very appreciated. Thank you very much.

QuantumJourney wrote:
I am new to Mac - just got my matchbook pro a few months ago. 256G is half gone with a lot of pictures and documents that I have not looked at in years.
I am using back blaze as a back up source, but you can only restore files, you cannot access them.
I want to use iCloud as a means to put all my old pictures on and if I want to email one to a friend, I can select it from the cloud, put it in my email and send it without downloading it to my computer.
Not yet, photo's are currently not stored in iCloud.
QuantumJourney wrote:
I also want to store all my music in iCloud, purchased and uploaded but I don't see how to do that.
Music that you purchased is always available from iTunes Cloud (not iCloud), if you wish to extend that to music you uploaded to your iTunes library then you would use iTunes Match (limit 25,000 songs). Match is $25 per year.
Changes are coming to the iCloud service, so although this information is up to date, it won't be for long.

Waterfall Charts

Hello all,
I have to create a so called "waterfall chart" (also called delta chart) in SAP BW 3.5 (see http://en.wikipedia.org/wiki/Waterfall_chart for an example) . The chart designer in SAP BI 2004s provides this chart type (see http://help.sap.com/saphelp_nw04s/helpdata/en/44/bcc74adef94612e10000000a11466f/content.htm ) . But it is unfortunately not available in BW 3.5. Do you have any idea how to create that kind of chart in BW 3.5? I already thought about defining a stacked chart and supressing certain parts by using transparent colours. But I still do not have an exact idea how to do it.
Many thanks in advance for your help
Regards
Marco

Hi Jody,
I did not get an answer but I found a way or lets say a workaround to realize the waterfall charts. You have to create a view which only contains the delta key figures and assign it as dataprovider to your chart. By using the chart type "stacked chart" you can "build up" all single graphs from these delta key figures. The parts (series) which are not to be shown (as for example the space between the X -axis and the delta) can be hidden by setting their colour and their frame colour to "none". For the remaiming parts you have to use a unique colour so that it looks in the end as if your graph consists of only one part. As it is unfortunately not possible to show more than one of these graphs in one chart you have to create multiple charts (one for each graph) and put them next to each other. Finally you have to format them in a way that it looks like one chart (deactivate auto format, remove the spaces between the charts, hide the y-axis (except for the chart on the most right hand side)... . It did it that way and it worked fine
Cheers, Marco

Click on chart values to get details

Hi,
We have a requirement where we need to click on chart series and get details for same, e.g if there are different employee groups showing totals in a graph, we need to be able to click on the total in chart and get detail for same.
Regards

Hi Najeeb,
RaviChandra is correct this can be achieved using the report -to - report functionality.
use transaction code: RSBBS. There you can connect two queries.
Once you have the connection set up, the user will be able to right click on 1st query -> Goto-> Second query will appear in the options.
check the link below
[http://help.sap.com/saphelp_nw70/helpdata/en/44/63ebb8896a311de10000000a155369/content.htm]

Waterfall Charts in Webi

Hi All,
Does anyone know how to create a Waterfall Chart in Webi... it is not a standard chart type in Webi, yet it is possible in Crystal Reports or Xcelsius...but I need a Webi solution to this chart type.
Any ideas on how to create this in Webi will be welcome.
Thanks
Jacques

1.Create a table in DB with 2 fields, CONCEPT and YEAR. Feed it like this:
   INCOMES                    2009
   DIRECT EXPENSES     2009
   INDIRECT EXPENSES 2009
2.Include this new table in Universe and link it with FACT_TABLE.YEAR ===> NEW_TABLE.YEAR
3.Create in universe 3 objects: Concept (dimension) Visible(measure) NotVisible(measure)
4.The query of these objects will be:
   a)Concept : NEW_TABLE.CONCEPT
   b)Visible: sum(DECODE   (NEW_TABLE.CONCEPT,'INCOMES',FACT_TABLE.INCOMES,
                                                                                'DIRECT EXPENSES', FACT_TABLE.DIRECT_EXPENSES
                                                                                'INDIRECT EXPENSES', FACT_TABLE.INDIRECT_EXPENSES))
c)NotVisible: its the same concept as Visible, here you have to think like this..."If CONCEPT is x, whats under it (abc)? if CONCEPT is y what´s under it? (def)
We have created 2 measures, visible will be colour blue and invisible will be white. Change the order of colours in the palette of data (properties of the graph)
5.Now just create a stack bars graph and add these new 3 objects of universe (Concept, Visible, NotVisible)
You will have to tune the order of position of measures, to quit backgroud colours and these things to simulate the effect of waterfall chart.

Waterfall chart data labels - not rendering in Flash

I have a problem with the waterfall charts. When I turn on the data labels, the charts fail to render in Flash - I get a axis and some garbled legend icons. If I turn off the waterfall chart data labels, the problem goes away. Clearly, there is some bug in the label coding.
Ken Jones

Make sure you have the "Refresh before components are loaded" option checked on your QaaWS connection for the monthly data in the connection manager of Xcelsius.
To do this go to the connection manager in Xcelsius. Go to the connection you want to edit. Click the "Usage" tab. Then check the first check box that reads "Refresh Before Components Are Loaded".
This will run that query as soon as the dashboard is loaded. I think what may be happening to you now is that you have set a trigger cell of some kind that says, "When cell X becomes "XYZ" run the monthly data query. But when the dashboard is first loaded cell X does not equal "XYZ" therefore the query does not run initially. But then when you click the weekly tab and the back to the monthly tab you are setting cell X to "XYZ", therefore the query runs at that point.
Hope this helps,
Jeff
Edited by: Jeff Hoffner on May 18, 2010 9:07 PM
Edited by: Jeff Hoffner on May 18, 2010 9:07 PM

Alert colors in Waterfall chart on iPad

Hi,
We have created a Web Intelligence Report with Waterfall charts and given colors for +ve and -ve values as green and red.
Report is coming well on desktop, but on iPad alert colors are not visible.
Any idea, how we can achieve this for iPad.
Thanks
Vaishali

hi,
you can create exceptions which automatically shows result in 3 colors
please refer:
http://help.sap.com/saphelp_nw04s/helpdata/en/c4/274b795a809a4da0f3c991284e1cee/frameset.htm
Regards,
Archana

Creating Waterfall Chart view on OBIEE Answers

Hello guys
Is it possible to create waterfall Chart view on OBIEE answers?
The idea is to show the differences in number between bars at the chart.
Please let me know how it can be done
Thanks in advance
Devarasu.R

Waterfall chart is not yet defined in OBIEE, But internal Corda Pop Chart engine allows you to develop new chart types. Look for Cords Pop Chart documentation in OracleBI\corda50\docs. But you need to do a feasibility study on what you get for how much work?
- Madan

Hyperion Web Analysis --Waterfall Chart

Hi,
I have to create a waterfall chart in Hyperion WA report.
Waterfall chart has to be created for different countries. Each country has 5-7 business units under it.
Only Budget values for each business unit has to be included in the chart and sum of all business units is the value for Country.
I would appreciate any help.

While there is no option to select a waterfall chart type, you can create a basic one manually using a bit of trickery:
For example in showing expense/profit:
Use accounts as the X axis, then on the Y: Revenue - Expenses, Revenue, Expenses
Then create a stacked bar chart, using colors as: Rev= Green, Exp=Red, Rev-Exp=White *This is so to hide it on the chart, you will need to make sure to have a white background for the chart.
Hope this helps get you started ;-)
Cheers, Iain

Waterfall chart

Anybody has an idea/sample on how to create a waterfall chart in Crystal XI?
Thanks.

Farhan,
I spent a lot of time trying to create one in Crystal Reports using formulas and subreports and stacked bar charts with the first stack series set to transparent only to find that it couldn't handle values that were less than the previous value.
However there is a 3rd party that has a charting add on where waterfall chart type is included. I believe they are called three d graphics.

Waterfall chart, Mobile rendering Error

dear all.
I got a problem mobile in waterfall chart
it doesn't bind label for bar
Is this bug? anyone got a this problem?
please advice for me.
device : ipad retina (ios7)
DS1.3 (SP1)

Hi - it seems to be working for me - see picture below:
Tammy

Variance details

Hi ,
I have executed KKS2 and got the Variances.
i have configured all the variances to flow to COPA.
Is there any report in SAP to view the varaiances in details like how much is towards input price and how much is towards input qty etc.,
Can we see these details order wise also.
Kindly help.
Thanks,
sudha

Hi
Please go through the below mentioned links refered
http://help.sap.com/saphelp_470/helpdata/en/90/ba6228446711d189420000e829fbbd/content.htm
Hope it may helpful to you
Regards
Praveen P C

Waterfall charts to present variance details

Similar Messages

Maybe you are looking for