Waterfox seems slow, but Firefox appears when I want to Fix it

Waterfox seems slow, but when I click on: "How to Fix the Problem", Firefox appears, instead of Waterfox............if I continue, will this cause any future problems, Or, will Waterfox problem be fixed/speed up, when I "Fix the Problem" in Firefox mode?

Hi Jckingdom:
Waterfox from my internet searches seems to be a 3rd party (not made by Mozilla) desktop 64 bit version of Firefox. Is that right?
If that is right, Mozilla doesn't support 3rd party browsers even if they are based on Firefox code. I suggest asking Waterfox support which seems to be at:
https://www.waterfoxproject.org/
I hope that helps!
Cheers!
...Roland

Similar Messages

  • Ello, I changed my Imac hard drive which no longer worked. I installed a hard drive Western Digital 500 GB 7200 rpm SATA3 WD5002AALX 32M Black. Sometimes I see the hard disk in the utility on the Starter CD, but access seems very slow. By cons when I want

    Hello, I changed my Imac hard drive which no longer worked. I installed a hard drive
    Western Digital 500 GB 7200 rpm SATA3 WD5002AALX 32M Black. Sometimes I see the hard disk in the utility on the Starter CD, but access seems very slow. By cons when I want
    install OS X 10.4.2 on the hard drive, I do not see the disk. What is the problem?

    Thanks for the help
    I started on the installation CD OS X 10.4.2, I used Disk Utility
    to partition the disk according to the document that you have proposed. unfortunately
    I have not succeeded. When I partition the disk, even if I called it Macintosh HD, it
    does not keep the name and it shows disk0s3 instead. I did an erase on disk.
    When I mount the disk it tells me that I must repair. When I tried to repair, I got
    the following message:
    Volume check failed
    The underflying task reported failure on exit
    1 HFS volume checked
    1 volume could not be repaired because of an error.
    I also had a message:
    Invalid b-tree node size.
    Note: The disc is new, but it has already been formatted on a computer Imac 27 inch 2011 OS X Lion.
          I used a USB 2.0 to SATA cable to adjust the formatting.
    What to do to fix it?

  • In Numbers, I copied a worksheet and deleted the contents. The sheet I copied from has a header, I can't see it or bring it up when I'm working but it appears when I print the sheet. How do I delete it?

    In Numbers, I copied a worksheet and deleted the contents. The sheet I copied has a header.  I can't see it or bring it up when I'm working but it appears when I print the sheet. How do I delete the header?

    Hi Cristina,
    Headers are not shown in normal view.
    Menu > File > Print to open Print View.
    Hover the cursor over the Header to see the outline. Click and delete.
    Regards,
    Ian.

  • I ordered the new Iphone 6 and it will ship on 10/31, on 10/15 I completed the paperwork to return my iphone 4 8GB, but it appears when my paperwork was emailed to me and I didn't notice until today.  It has my return phone listed as an iphone4 16GB...is

    I ordered the new Iphone 6 and it will ship on 10/31, on 10/15 I completed the paperwork to return my iphone 4 8GB, but it appears when my paperwork was emailed to me and I didn't notice until today.  It has my return phone listed as an iphone4 16GB...is this going to be an issue?  I was quoted a trade in value of $200 and need to apply this to my iphone 6, if the trade in is not going to be $200 I need to cancel.  I did call the verizon store today and the woman told me it should be no problem, but I keep hearing horror stories about this trade in program and I need to be sure.

    susan522,
    Congratulations on the purchase of your new iPhone 6. Ordering a new device can be very exciting and we understand wanting to be able to get your hand on it as soon as possible. With the trade in program the device that is being returned should indeed match what was selected at the time the trade in was processed. What we can have you do is reach out to our trade in team to see if this will cause any problems with the amount you receive once you turn in the iPhone 4. You can reach them here http://vz.to/1pJQcUb by clicking in the "How do I contact you" section. It will allow you to send an email to the team that handles the trade in requests personally.
    CandiceH_VZW
    Follow us on Twitter at @VZWSupport

  • I downloaded a game that need to pay, but after that when i want to update or download a free game from app. It opens the pilling page again, and can't download or update anything any more, why this happen?

    Help
    I downloaded a game that need to pay, but after that when i want to update or download a free game from app. It opens the pilling page again, and can't download or update anything any more, why this happen?

    Recent crashes of certain multimedia contents (this includes Youtube videos, certain flash games and other applications) in conjunction with Firefox are most probably caused by a recent Flash 11.3 update and/or a malfunctioning Real Player browser plugin.
    In order to remedy the problem, please perform the steps mentioned in these Knowledge Base articles:
    [[Flash Plugin - Keep it up to date and troubleshoot problems]]
    [[Flash 11.3 crashes]]
    [[Flash 11.3 doesn't load video in Firefox]]
    Other, more technical information about these issues can be found under these Links:
    http://forums.adobe.com/thread/1018071?tstart=0
    http://blogs.adobe.com/asset/2012/06/inside-flash-player-protected-mode-for-firefox.html
    Please tell us if this helped!

  • Hi I'm Barb I have another question - thanks to Eric Root was able to install OSX - but had problum when it wanted to set everything up beCause I forget my login info so I put it thru as No Sign In - I got my info and would like to have OS X set itself up

    Hi I'm Barb I have another question - thanks to Eric Root was able to install OSX - but had problem when it wanted to set everything up because I forget my login info so I put it thru as No Sign In - now I have my info and would like to have OS X set itself up can I get back to that setup point? and of course how? Thanks again Eric

    Hi Eric -As to both questions I must tell you how relieved you made me, I've been on mac's since 1990? and this is truthfully the first time I've received a intelligent understandable response without have to go through 3 or 4 people - You are really Great - hope you won't mind my coming back to you if I need to. Thanks Again   -   Oh by the way I did what you said and did it manually easier and safer. Barb

  • A copy of Firefox is already open. Only one copy of Firefox can be open at a time. I GET THIS MESSAGE - BUT FIREFOX APPEARS NOT TO BE OPEN.????????

    i have already deleted (trashed) all versions of firefox, and then re-downloaded the new Firefox, and when i try to open it, i get the message, "A copy of Firefox is already open. Only one copy of Firefox can be open at a time."

    Make sure you allow Firefox a few minutes to close down,and always use the menu options to close Firefox (Not just closing a window or killing the process).
    Just for now Look for Firefox processes or plugin container that are still running and kill them before trying again.
    * see [["Firefox is already running but is not responding" error message - How to fix it]]
    ** and also [[Firefox hangs or is not responding - How to fix]] <br />& http://kb.mozillazine.org/Firefox_hangs#Multiple_sessionstore.js_files

  • I dropped my macbook pro off my couch and when it landed it was shut, i opened it and it was on a grey sceen so i shut it down with the button and when i turned it back on it was kind of slow but not anymore i just want to know if i should be worried

    i dropped my macbook pro off my couch and when it landed it was shut, i opened it and it was on a grey sceen so i shut it down with the button and when i turned it back on it was kind of slow but not so much anymore. i quit all of my applications before i shut down and i noticed that when there are no more things t quit and i click "hide finder" its not grey anymore it still gives me the option to hide it when i dont need to, little things bug me and i just got this laptop, i just want to know if i should be worried

    I suggest you immediately make a backup of your data. You don't know if or when the computer will show some symptoms from the drop. You may want to, for piece of mind, take the computer to an authorised service center for assessment. No one here can assess any internal damage you may have done.

  • My connection seems slow but I've no idea what its...

    I'm on Option 3 - my connection seems slow. I was unable to use the speed tester on the BT site because the latency was too high. Are these results typical?
    Below are my speedtest.net results from 2010 to now and my ADSL line status
    ADSL line status
    Connection Information
    Line state
    Connected
    Connection time
    0 days, 00:20:36
    Downstream
    21,344 Kbps
    Upstream
    1,159 Kbps
    ADSL Settings
    VPI/VCI
    0/38
    Type
    PPPoA
    Modulation
    G.992.5 Annex A
    Latency type
    Fast
    Noise margin (Down/Up)
    2.9 dB / 6.5 dB
    Line attenuation (Down/Up)
    18.3 dB / 6.2 dB
    Output power (Down/Up)
    32.5 dBm / 1.7 dBm
    Loss of Framing (Local/Remote)
    0 / 0
    Loss of Signal (Local/Remote)
    0 / 0
    Loss of Power (Local/Remote)
    0 / 0
    FEC Errors (Down/Up)
    0 / 0
    CRC Errors (Down/Up)
    4 / 0
    HEC Errors (Down/Up)
    14 / 0
    Error Seconds (Local/Remote)
    4 / 0
    IP_ADDRESS
    TEST_DATE
    TIME_ZONE
    DOWNLOAD_MEGABITS
    UPLOAD_MEGABITS
    LATENCY_MS
    SERVER_NAME
    DISTANCE_MILES
    86.170.227.14
    01/05/2010 20:37
    GMT
    1.27
    0.32
    57
    Birmingham
    50
    86.170.227.14
    01/05/2010 20:41
    GMT
    1.31
    0.34
    57
    Birmingham
    50
    81.159.169.200
    1/16/2013 1:08 PM
    GMT
    1.49
    0.72
    19
    Sheffield
    50
    81.159.169.200
    1/16/2013 1:14 PM
    GMT
    1.34
    0.88
    15
    Leeds
    0
    109.151.198.84
    1/16/2013 1:32 PM
    GMT
    2.28
    0.97
    15
    Skipton
    50
    86.171.176.205
    1/16/2013 1:37 PM
    GMT
    1.94
    0.73
    15
    Kingston Upon Hull
    50

     The wholesale broadband test rates my speed today as 18.15mbps download and 0.86mbps upload. Ping 21.38ms. I've never seen it that high...odd
    ADSL line status
    Connection Information
    Line state
    Connected
    Connection time
    1 days, 05:02:32
    Downstream
    21,344 Kbps
    Upstream
    1,159 Kbps
    ADSL Settings
    VPI/VCI
    0/38
    Type
    PPPoA
    Modulation
    G.992.5 Annex A
    Latency type
    Fast
    Noise margin (Down/Up)
    2.8 dB / 6.5 dB
    Line attenuation (Down/Up)
    18.3 dB / 6.2 dB
    Output power (Down/Up)
    32.4 dBm / 1.7 dBm
    Loss of Framing (Local/Remote)
    0 / 0
    Loss of Signal (Local/Remote)
    0 / 0
    Loss of Power (Local/Remote)
    0 / 0
    FEC Errors (Down/Up)
    0 / 0
    CRC Errors (Down/Up)
    3392 / 0
    HEC Errors (Down/Up)
    21015 / 0
    Error Seconds (Local/Remote)
    798 / 0

  • Body of message either blank  but text appears when Reply button hit

    I have had this problem over the past 3 months or on a number of email messages that I have received, in each case from Windows users. When I open the message(s), either there is no text or only a part of the text appears. If I hit "Reply" to notify the sender of the lack of any text, the full text appears in the new Reply button.
    Anything that I can do on my end to eliminate these occurrences?
    Anybody else experiencing a similar situation?

    If there are blank areas in the text of the original, do they correspond to where in the reply the missing text shows up, even if the text doesn't actually appear when selected? Is this highlighted area at some particular location in the messages, like at the end, or at one or more points in the middle of the text?
    How are the Mail preferences for responding to messages (in the Composing tab) & displaying remote images (in the Viewing tab) set?
    Does this happen only with a particular type of message, like HTML formatted ones, or just ones with attachments, or anything like that you can correlate with the problem?
    If, instead of hitting the reply button, you change the message view (like by choosing the plain text or next alternative in View -> Message or text encoding in Message -> Text Encoding) does the missing text appear?
    Any Mail plugin or other modifications on your system?

  • Terrible noise appears when it wants and as long as it wants

    <hi @ all,
    I have a Creative x-fi music running on Win7. ?
    Normally i have an amazing good sound, but sometimes just out of a sudden it gets terrible (a terrible noise comes to the foreground and the normal sound gets "deeper"). This just appears whenever it wants to.
    Sometimes right after PC start for like 2secs, sometimes when i have the PC running for like 0hs without problems.
    It suddenly comes and suddenly goes. There is no "program" i started before etc.
    And it lasts as long as it wants to, sometimes secs, sometimes minutes (till i restart the pc).
    Like:
    I start the PC, close all programms running?<span class="lia-user-name UserName" ?<span class="lia-user-name UserName" in background and start VLC to watch a movie.
    The movie runs for 2hs without any problems. Suddenly the noise appeary without me even touching the mouse.
    2mins later the noise is gone.
    I already tried different drivers. The onBoard soundcard (which is deactivated when im running the creative card) has no problems.
    Anyone know what this could be or even better how to fix this? Ive really no idea.
    Or anyone experienced <span class="lia-user-name UserName" this problem before?
    Thx for help,
    theNick

    I keep encountering same once in every 2-3 days.
    Restarting windows audio service solves the problem
    (My) Computer->Manage->Services->Windows Audio->Restart

  • How do I get rid of the grid that appears when I want to edit a photo

    How can I get rid of the grid that has suddenly appeared when I edit photos?

    Make sure that you have installed East Asian language support.
    * http://en.wikipedia.org/wiki/Help:Multilingual_support_%28East_Asian%29 Wiki: Help:Multilingual support (East Asian)
    * http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/int_pr_install_languages.mspx?mfr=true - Microsoft Windows XP - Install East Asian language files on your computer

  • Slow boot up time and I want to fix.

    I am running 10.8.2 on my macbook pro that is a little over a year old. It could just be me but I remember when it would bot up in a matter of seconds....now it seems to take its time which is ok but if it can be faster I would love that. I have a lot of material added lately to my itunes which consist of music and videos right now but photos will soon become managed through that as well. So if anyone can help I will appreciate this. Thanks.

    This is where you will find other notebook owners:
    MacBook Pro
    https://discussions.apple.com/community/notebooks/macbook_pro 
    https://discussions.apple.com/community/mac_os?view=discussions
    http://www.apple.com/support/macbookpro
    Use OmniDiskSweeper
    Make sure you have 20% or more free space
    consider backups, archive, and off loading files to another drive and also upgrade and replace your internal drive.

  • Sending the UNIX command to install updates over Remote Desktop returns No Updates Available, but they appear when I manually check in the App Store. Why?

    We use profile manager to set the URL for the Software Updates on a server inhouse, and the clients see the updates when I open the app store on their iMac, but when I try to send the update command to all Macs through Remote Desktop, RD is returning that there are no updates available.
    And here's a log message:
    Mar 20 09:45:17 Alisas-iMac kernel[0]: BUG in process suhelperd[261]: over-released legacy external boost assertions (1 total, 1 external, 0 legacy-external)
    Mar 20 09:45:17 --- last message repeated 11 times ---
    Why does this happen? Do we really have to manually update each client or is there something wrong?

    We use profile manager to set the URL for the Software Updates on a server inhouse, and the clients see the updates when I open the app store on their iMac, but when I try to send the update command to all Macs through Remote Desktop, RD is returning that there are no updates available.
    And here's a log message:
    Mar 20 09:45:17 Alisas-iMac kernel[0]: BUG in process suhelperd[261]: over-released legacy external boost assertions (1 total, 1 external, 0 legacy-external)
    Mar 20 09:45:17 --- last message repeated 11 times ---
    Why does this happen? Do we really have to manually update each client or is there something wrong?

  • [solved] Firefox appearance when chrooted in XFCE

    So I run a 32-bit chroot to use firefox with java and flash.  Works just peachy - except that the UI looks like the default gtk theme when the rest of my UI has pretty a XFCE look.  Any way I could make FF look like the rest of XFCE in my native 64-bit environment?
    Last edited by synthead (2008-01-31 11:09:48)

    Solved, you were right - I installed the gtk-xfce-engine.  It looks exactly the same now.  Also, I installed the font theme I'm using on my 64-bit system, and because I'm sharing the home folder in my 32-bit chroot with my 64-bit system, it all came to life without configuration.  Thanks for the help!

Maybe you are looking for