Watermark help

I am using lightroom 5 and I have created a graphic watermark. I can not figure out how to make the background of the watermark transparent. Any advice?

There are lots of tutorials on line about watermarks. 

Similar Messages

  • Graphic watermark help

    Hello
    i made a graphic watermark with photoshop
    the document size i checked is 1200 x 1200 pixels
    i exported it as png to use it in lightroom as watermark
    it is impossible to place it at the bottom
    how do i place it where ever i want to?
    when i scale it to fill the picture, it will go in the upper part of the picture
    when i try to change the position with the little grid i can push it down until the middle of the picture but not more
    how can i do?
    do i have to change the photoshop document size?
    if so, how can i do it without altering the graphic i just did?
    it took me too long to do it again
    thanks for your help
    matteo

    In the watermark Editor you need to select an anchor point. Perhaps try the center point and then experiment with proportional and fit rather than using fill.
    You can also create some horizontal and vertical inset, which may help.
    http://lightroomsecrets.com/2010/03/watermarks-take-a-big-leap-forward/

  • Batch watermark help? lmage logo moves out of photo

    hi i'm having trouble batch watermarking basically the photo logo moves in the first few photos its okay and then the logo moves from the place i've positioned to out of the screen

    hi thanks for the reply the photo dimensions are the same on all photos, i have a photograph open in photoshop
    new action
    name it
    record action
    file, place upload the image logo
    move it to a corner where i want it
    press enter
    file save as (save as jpg)
    stop
    automate batch and then into the folder where the other photos are
    the first one is okay and then the rest are like of the screen for some unknow reason
    thanks for helping!

  • Lightroom 2 watermark HELP!

    Trying to add a watermark but it wont show up!

    As far as I know, Lightroom 2 doesn't have watermark capabilities.
    How are you trying to add a watermark?

  • Otterbox Defender Watermark help.

    I just today put my verizon iphone 4 in the otterbox defender. (yes the one that works with bot at@t and verizon iphone 4) I left my front zagg invisibleshield on because i hear it fixes the watermark problem, but my defender still has a BAD watermark issue. Any ideas?

    Invisibleshield is not compatible with the Defender.  The new Defenders don't have the watermark issue.

  • Trying to create a brush to watermark my photos. HELP!!

    So, Im trying to create a brush to watermark my photographs, but the 'define brush preset' isnt clickable, but it is clickable with any other photo i try it with. What am i doing wrong? can someone please help me? It's quite frustrating.

    Haw large in Pixels is the image?
    And quite frankly I would recommend creating a Path and using »Embed Path« instead of a Brush as Actions that include Paths can be more easily transferred without the risk of forgetting the Brushes.

  • PhotoShop Elements 10...I need help with font size for watermark in Processing Multiple Files.....

    I have PhotoShop Elements 10, and I am trying to watermark some of my photos, I have successfully added them one at a time with a font large enough to be seen. Now I am trying to add it using the "process multiple files" , I can do that but the font even at 72 the largest setting is so small on the photo you can barely read it! Can anyone help me the size larger on my photos?

    Thank you, Michael. I just watched the Russell Brown video again for CS6 and looked real closely at his settings in ACR and he was using 240ppi. I changed my file in image size to 240 ppi and then ran the script and the layer didn't change size this time when I ran the script.
    It is kind of annoying to have to change the image size everytime I want to run this script and then change it back again as most of my files are 300 ppi. I used to run his script for edit in ARC in CS5 and recall that if I just remembered to change the settings in ARC to 300 ppi while the script was playing and before pressing 'open' that the image wouldn't change size during the raw processing, but this doesn't seem to be working in CS6. Do you know of a way to use this script and not have to change the ppi for the image to 240?
    Thanks again.

  • Photoshop says "Rendering Type" and loads for a very long time, how do I fix this? I'm new to Photoshop and I was trying to learn how to make a watermark. This happens once I press the "Text" tool. I'm using a Mac with OS X. Please help, thank you.

    Photoshop says "Rendering Type" under a "Progress" Bar that shows up. I'm trying to create a watermark and this happens when I press the "Text" tool. Please help, I'm new to Photoshop. Thank you.

    So you created a document 192000 pixels wide, and 108000 tall, and  set the type to be 2 inches tall.  Yes, the type is going to take a few minutes to render in that document.
    Yes, you created a document much bigger than you probably intended (you probably wanted 1920 PIXELS by 1080 PIXELS).
    Pixels and inches are not the same, and you need to pay attention to the units.

  • Hi... I am looking for an inexpensive app for my macbook pro that I can put pictures and videos together into a slideshow with captions and music WITHOUT a watermark and that also will burn the slideshow to a DVD in its own app. Help?

    Hi... I am looking for an inexpensive app for my macbook pro that I can put pictures and videos together into a slideshow with captions and music WITHOUT a watermark and that also will burn the slideshow to a DVD in its own app. Help?

    The issue with the A1400 is that like most economy compact cameras, they will not have very fast focus times in indoor lighting situations. Many people have gone to entry level DSLR's (Canon T3i) or micro 4/3 cameras. They are fairly expensive, but a late model refurbished T3i can sometimes be found with a kit lens for about $300.00. With Auto and scene modes, as well as full manual modes, these are very versatile cameras that focus very quickly, even in lower lighting situations. Canon is not really into the micro 4/3 cameras, instead they are focusing on the new G7x and G1x cameras, which are way out of your price range. The A720 is still available used at some places such as KEH camera, but you'll need to check often as their stock changes constantly. Obviously the DSLR's don't use AA batteries, but the T3i is good for about 600 photos (or more) per charge.
    My refurbished DSLR was practically brand new condition when I got it. I could not find any sign of wear at all, so I feel they are a real bargain. These are rugged cameras that are made to last. The A1400 is a $99.00 camera, so it's not intended for heavy usage, plus the image quality of a DSLR (even entry level) is far better than the A1400. That would be my recommendation.
    Steve M.

  • Help! When in "graphic watermark" setting, how do I remove white box around my watermark? Already saved in PNG

    I'm trying to upload a saved graphic watermark to my photos in Lightroom 4 but no matter what I do, I can't get the white box around the watermark to go away. I've already tried saving the watermark file in PNG like other sites suggested but it does no good. Other sites tell me I need to save the watermark in another version of adobe and check the box "transparent" but Lightroom is the only version of adobe I have. Any help ASAP would be greatly appreciated!!!

    I have also been trying to solve the same problem.  Where does one take an already created watermark and make it transparent?  I have Photoshop on my old Mac and e-mailed my solid white background watermark to myself, opened it in Photoshop and "erased" the white background.  Transfered it back to my Lightroom on my MacBookPro and exported the test photo w/ the "erased" background watermark.  I had no idea if it would work….it did not.  OR : How does one create a transparent watermark?  I have a graphic I want to use w/ my name.   Please HELP!!!

  • Pdf watermark, positioning help

    I've recently been playing around with the idea of automatically updating pdf's that are submitted to our website with our web address. Idealy the text would be a clickable link that is centered and positioned at the very top of the page (although im not quite sure if the clickable link part is even possible with cfpdf or itext).  I've been able to add watermarks using both cfpdf and itext, but the watermarks always seem to be pushed down almost an inch from the top of the page and i need the watermark to be at the very top of the page so that it doesn't interfere with the other text (even though the watermark has an opacity of 85%).  I'm looking for suggestions on how i can:
    A. position the text/watermark at the very top of the page.
    B. make the text a clickable link.
    Any help is greatly appreciated!
    Thanks!

    jcdev01 wrote:
    but the watermarks always seem to be pushed down almost an inch from the top of the page
    It sounds like your positioning is off.  Can you post the code you are using to position the watermark?
    Regarding hyperlinks, you can use an Anchor object to add a hyperlink to an existing pdf.
    http://itextdocs.lowagie.com/tutorial/objects/anchors/index.php

  • I need help on these issue (watermarking and steganography)

    Hi guys, my lecturer did assign me a an assignment. She asked to insert the information about the production's company,expired date, and the approval message into a logo (to avoid fraud lisence). She's giving me option whether to use steganography or watermarking. From my reading (i'm such newbie in this field) one of the best way in stegano and watermarking is patchwork algorithm. So I did search on patchwork algorithm.
    The thing that make me so confuse is when I did the searching in google for that patchwork algorithm, the result will be in patchwork algorithm in waterwarking. There's no such details for patchwork algorithm in stegano. There's some in stegano but those just touch on the theory only. So do u guys know resource that I could refer about patchwork algorithm in stegano? I mean very detail experiments or journal or even sourcecode..
    Well, it's fine enough if I have to do it in watermarking. But there's is one issue. When I'm hiding the info, can I extract the info by using a system only (like stegano) without using any hardware device? If it so, is there any sample source code for it? Please help me...Thanks in advance guys!

    What is the connection to LabVIEW?
    LabVIEW Champion . Do more with less code and in less time .

  • Need help with making a Watermark

    I am using Photoshop Elements 8 to make a watermark.  All goes well until I get to the (Go to edit>select "Define Brushes")  Define Brushes is not highlighted and will not let me select it.  Helpful solutions would be most welcome.  I have tried a number of things including uninstallingthe program, restarting, installing.  I'm out of ideas.

    You need to have an open image. So you must first create your watermark. Here are instructions for making a text watermark with bevel.
    Create a template using the editor:
    File >> New >> Blank File
    Set your dimensions and resolution of 72 and choose transparent for your background color.
    Select the type tool and add your name or watermark information.
    Choose the effects pallet and under styles find the bevels. Drag the one you cant on top of the text. The go to File >> Save For Web
    Select file type PNG24 (that will preserve the transparency) and then save your file.
    You can now use this file to make your brush.
    Go to Edit >> Define Brush
    After you have saved your new brush pre-set select the brush tool and scroll down to the bottom of the brush list. You can apply to photos with one click.

  • Need help creating Watermark

    I am trying to create a "fancier" watermark for my photos.   Something that is 2 or 3 lines, maybe multiple fonts and colors.  I can do it individually in PSE 7 but can't figure out how to add it quickly to all photos in a set.  In the "Process Multiple Files" I am only allowed one line and limited characters.  I have placed Text on a photo then used the "Duplicate Layer" option and placed it on each photo that is open.  But this limits me to location and is slow.
    What are my options?
    Thanks in advace for the help.

    Suggest that you make a brush containing the information that you desire.
    This provides the ability to apply same to multiple picture files, albeit one at a time, in a location of choice. The batch process mode is not very flexible.
    This link provides a tutorial for making a brush:
    http://www.elementsvillage.com/forums/showpost.php?p=2610&postcount=14

  • Hello, I have been exporting my photos with a watermark. Without changing any settings, half way through my day things changed, and now about 1 out of 7 photos have the watermark after export. Change you helpe me change this back please?

    Hello, I have been exporting my photos with a watermark. Without changing any settings, half way through my day things changed, and now about 1 out of 7 photos have the watermark after export. Change you help me change this back please? Has anyone had this issue before?

        I'm sorry to learn that you have endured the audio issues outlined in your post for almost 2 years SusanLM1! This is certainly not normal! Let's get to the bottom of this issue, first please confirm your phone model; your mention that you have the iPhone 5 but your post is on the iPhone 5S forum. Also, share the iOS version currently installed on your phone. What is your ZIP code? Does this happen mainly while you make/receive calls from a particular location (home, office, etc)?
    AntonioC_VZW Follow us on Twitter at www.twitter.com/VZWSupport

Maybe you are looking for