Watermark problems in 5.4 version

I have downloaded the 5.4 lightrooom onto a new computer with Windows 8. Originally had 4.0 on older laptop with windows 7. Since on new laptop - the watermark feature WILL NOT WORK, and the presets "appear" to be there, but when clioking a folder - nothing happens - no presets come up.

Downgrading of the iOS is not supported.
The only difference between 4.3.3 and 4.3.5 are security fixes.
Try basic troubleshooting of reset, restart, restore to rectify your issues.

Similar Messages

Hello all .. i have a big problem in my ipad version 5.1.1 that is when i connect the ipad with my computer the i tunes give me this message ( itunes couldnt connect to this ipad .an unknown error occurred (0xE8000012).) how i can solve this problem pleas

hello all .. i have a big problem in my ipad version 5.1.1 that is when i connect the ipad with my computer the i tunes give me this message ( itunes couldnt connect to this ipad .an unknown error occurred (0xE8000012).) how i can solve this problem please
and this is an pic for the problem

There is some troubleshooting for 0xE8 error codes on this page : http://support.apple.com/kb/TS3221 - you could see if anything on that page fixes it

Problems with Itunes New Version?

Problems with Itunes New Version?
Here is a copy of the error message. Every Time I listen to a song and it end and I go to listen to a new song the Itunes Freeze up. This is on the New Version of Itunes. I have a Windows 7 32bit 3GB Ram 1TB harddrrive Space
<edited by host>
Thanks,
<edited by host>
Fault bucket 1279649891, type 5
Event Name: AppHangB1
Response: Not available
Cab Id: 0
Problem signature:
P1: iTunes.exe
P2: 9.2.1.5
P3: 4c47745b
P4: e36b
P5: 2048
P6:
P7:
P8:
P9:
P10:
Analysis symbol:
Rechecking for solution: 1
Report Id: 46dfdb3e-99a7-11df-8064-00038a000015
Report Status: 0
Fault bucket 1279649891, type 5
Event Name: AppHangB1
Response: Not available
Cab Id: 0
Problem signature:
P1: iTunes.exe
P2: 9.2.1.5
P3: 4c47745b
P4: e36b
P5: 2048
P6:
P7:
P8:
P9:
P10:
Analysis symbol:
Rechecking for solution: 0
Report Id: 46dfdb3e-99a7-11df-8064-00038a000015
Report Status: 0

There certainly is a problem with itunes. I downloaded 9.2 and now it won't open. It won't recognize my iphone, either. I uninstalled it in the order recommended by the site, no joy. Deleted a configuration file, no joy. System Restore, no joy. All other software and hardware on the machine is working fine. I call AppleCare AND a local store, either they are completely clueless (which I doubt), or they have no idea how to fix it. I can't even back up my phone, or use the ipod. And since no one at Apple seems to care enough, I'll have to wait until the clamor is loud enough for them to even admit to a problem before I can use the ipod again.

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding"

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

HT2292 hello i'm facing problem i downloaded iTunes version 11 32bit and after i installing the set up when i opened the iTunes a massages occur saying i tunes could not connect to iTunes store an unknown error occurred (-3212) even though my interne

Hello i'm facing problem i downloaded itunes version 11 32bit for windows 7 and after i installing the set up when i opened the iTunes a massages occur saying i tunes could not connect to iTunes store an unknown error occurred (-3212) even though my internet is on

Try this...
Triple click anywhere in the line below to select it and press Ctrl+C to copy it.
cmd /k netsh winsock reset
Press the WinLogoKey+R to open the run dialog, then Ctrl+V to paste, then press enter/return.
You should get something similar to this:
Reboot the computer and the problem should be resolved.
If it doesn't work then perhaps a full tear down and rebuild of iTunes will fix things. See Troubleshooting issues with iTunes for Windows updates for details.
tt2

Hi Experts , I am currently facing problems while running restricted version copy .. The log says 0 location products copied and that the process has has timed out. the error message is /SAPAPO/MVM_INT_SVC_CO_VER_LCW reported exception in task DP00014, th

Hi Experts , I am currently facing problems while running restricted version copy in sap apo .. The log says 0 location products copied and that the process has timed out. the error message is " /SAPAPO/MVM_INT_SVC_CO_VER_LCW reported exception in task DP00014 " , then ending in time limit exceeded. could anyone explain why this happens. please note even if the log says 0 location products copied , in reality they have have been partially copied.
Regards
Jerel

Hi, thank you for your replies, I found out few things about my servlet, and its portability
and i have few questions, although i marked this topic as answered i guess its ok to post
I am using javax.servlet.context.tempdir to store my files in that servletcontext temporary directory. But i dont know how to give hyperlink
of the modified files to the user for them to download the modified files.
What i am using to get the tempdir i will paste
File baseurl = (File)this.getServletContext().getAttribute("javax.servlet.context.tempdir");
System.out.println(baseurl);
baseurl = new File(baseurl.getAbsolutePath()+File.separator+"temp"+File.separator+"files");
baseurl.mkdirs();so i am storing my files in that temp/files folder and the servlet processes them and modifies them, then how to present them as
links to the user for download ?
and as the servlet is multithreaded by nature, if my servlet gets 2 different requests with same file names, i guess one of them will be overwritten
And i want to create unique directory for each request made to the servlet , so file names dont clash.
one another thing is that i want my servlet to be executed by my <form action> only, I dont want the user to simply type url and trigger the servlet
Reply A.S.A.P. please..
Thanks and regards,
Mihir Pandya

TS3212 Is anyone else having problems loading the newest version of iTunes (10.6.3) on Windows?

Is anyone having problems loading the newest version of iTunes (10.6.3) using Windows Vista? My current iTunes program version 10.6.1 keeps telling me there is an update but when I try to load it the information box goes away and nothing happens. I have tried downloading the new version from Apple web site but it brings up a warning screen of " iTunes setup.exe is not commonly downloaded and could harm your computer." I select the action of run anyway and get the next error "iTunes Setup.exe is not a valid Win32 application." What Gives?

I select the action of run anyway and get the next error "iTunes Setup.exe is not a valid Win32 application."
In the course of your troubleshooting to date have you worked through the following document?
iTunes: Windows reports that "iTunesSetup.exe is not a valid Win32 application"

Anyone else had problems downloading RH9 trial version?

I have unsuccessfully tried to download the RoboHelp 9 trial version using various browsers (IE, Firefox, Safari) on both my work and personal laptops. Received the following error message when trying to download the trial this morning using Safari. Has anyone else had problems downloading the trial version? I just ran across download information on Adobe's website this morning stating that popups, firewalls, 3rd party security, etc. must be disabled before downloading. Is this the problem or is there an issue at Adobe's end??
I haven't used RoboHelp in many years and need to get the trial installed asap in order to compare against Flare 8.
Thank you.
Ruth Markham

Hi Ruth,
Yes probably, your firewall, might be obstructing.
I was wondering, in case you are still facing the issue then you can try following steps too--
1) Go to this page (copy to your address bar)
https://www.adobe.com/cfusion/tdrc/index.cfm?product=robohelp&loc=en_us&promoid=DJDVH
2) Log in using your Adobe ID and Password
3) Copy paste each of the below links in the address bar, one at a time and hit "Enter" from keyboard (Return)
http://trials.adobe.com/AdobeProducts/RBHP/9/win32/RoboHelp_9_WWEFDJ.exe
http://trials.adobe.com/AdobeProducts/RBHP/9/win32/RoboHelp_9_WWEFDJ.7z
4) Once you ahve downloaded both of the links, use the EXE to initialize the installer.
Good Luck!
Thanks,
Anjaneai

When i connect my ipad2 to iTune, it show "iTunes could not check for an update to the carrier settings for your iPad. An unknown error occured (1651)". What should i do to solve this problem? My iTune version is 10.1.4.10 and my ipad is 4.3.5.

When i connect my ipad2 to iTune, it show "iTunes could not check for an update to the carrier settings for your iPad. An unknown error occured (1651)". What should i do to solve this problem? My iTune version is 10.1.4.10 and my ipad is 4.3.5.

If you have iOS 7.1 then you must be a developer, so you should be posting in the developer forums : https://devforums.apple.com/index.jspa

Is Anyone Having Problems with the newer version of Firefox?

I still have my older Mac OsXv10.4 Tiger software. I wasn't exactly happy with Safari browser as it would block many sites and were considered incompatible so I downloaded the free Firefox browser (the 2.0 version) of which I STILL have. I'm aware that there is a much newer version and would like to download that, but I've heard a lot of people saying they have been having severe problems with it, but then they have PCs and not Macs.
So my question is for you Mac users that use Firefox, have you had major problems with the newer version? I'm real hesitant to download if I'm going to have the same problem PC users are having...like constantly crashing. Also would my old Tiger software be compatible? I don't want to upgrade to Leopard.

Yes. I had problems with Firefox 3.5. The primary problem was very slow or never-ending loading of certain websites (particularly secure sites and sites with many features). I also have had similar, but not as bad, problems with Safari 4. I never had these problems with Safari 2 or Firefox 2. It just seems that with each update, the problems increased for me. I have read the Safari and Firefox forums and tried many fixes with little improvement. I have come to the conclusion that there is some kind of compatibility problem between the latest versions of Safari and Firefox and Shockwave Flash and/or Javascript and OS 10.4, particularly on PPC Macs. I expect there are many who will disagree and I cannot argue or prove the point. This is just my opinion. And I recognize that my problems could be caused by my setup and not by the browsers. By the way, I do not use any add-ons with any of my browsers. Anyway, I got tired of dealing with it and installed the latest version of Camino about 2 weeks ago. I also did a clean install of Firefox 3.0.13. Camino is working out great for me. It is simple and it works. No problems at all. So currently I am using Camino as my primary browser and Firefox 3.0.13 as my backup. I hope this helps.

Problem with this new version is when i open firefox something change my home page to mozila defalut page and in the new tab open mozila firefox first run page.Sorry for my bad English

Problem with this new version is when i open firefox something change my home page to mozila defalut page and in the new tab open mozila firefox first run page.Sorry for my bad English

Sounds like this issue:
* http://kb.mozillazine.org/Preferences_not_saved
* [[Preferences are not saved]]

Problem in creating new versions for existing DIR using CV01N

I am working in SAP ERP 6.0 EHP 4.0 system.
I have problem in creating new versions for existing DIR using CV01N
I create a DIR version 00 with functional location and mpd cycles. Then when i try to create a new version by copying the contents created from already created document.I change the MPD cycles in the new version and save it.
once when i display the first document created the mpdcycle specified in version 01 is copied to the 00 version.
The document is inconsistent where versioning of document doesnot work properly wrt MPDCYCLE and MP HEADER.
The problem which i found was the document identification guid remains the same for all the document versions getting created.
The same is working fine in SAP ERP6.0 EHP3.0 sytem.
Please someone help me in resolving the above issue.
Regards,
Prasad.B

There is a change in the standard code.The reason for the above problem was because of a missing Enhancemnet point in a standard function module 'CV110_DOC_CREATE_WITH_TEMPLATE'.
IS-ADEC-MPD - Enhancement to copy MPD data
ENHANCEMENT-POINT CV110_DOC_CREATE_WTEMPL_01 SPOTS ES_SAPLCV110.
+*$*$-Start: CV110_DOC_CREATE_WTEMPL_01----------------------------------------------------------$*$*+
+**ENHANCEMENT 1 ZSF_AD_MPD_SAPLCV110.    "active version**+
+*** copy MPD relevant data from templ. doc to current doc**+
+**CALL FUNCTION 'MPD02_COPY_MPD_DATA'**+
    +**EXPORTING**+
      +**is_draw = ls_draw**+
    +**TABLES**+
      +**ct_drad = lt_drad.**+
+*ENDENHANCEMENT.**$*$-End:   CV110_DOC_CREATE_WTEMPL_01----------------------------------------------------------$*$*+
Created a custom enhancement point similar to SAP ECC6.0 EHP 3.0 system.
The reason was the buffer was not getting cleared previously.After inserting the above code the DIR's are getting created withot any issues.
Regards,
Prasad.B

[SOLVED] Dmenu + Xmonad, problem in a new version.

Hello guys.
I recently have problem with the new version of Dmenu on Xmonad. Dmenu version is 4.5 and the code i use is this:
keys' :: XConfig Layout -> M.Map (KeyMask, KeySym) (X ())
keys' conf@(XConfig {XMonad.modMask = modMask}) = M.fromList $
-- launching and killing programs
[ ((modMask, xK_Return), spawn $ XMonad.terminal conf)
, ((modMask, xK_F2 ), spawn "exe=`dmenu_path | dmenu -fn -*-profont-*-*-*-*-12-*-*-*-*-*-*-* -nb black -nf rgb:a0/a0/a0 -sb rgb:00/80/80 -sf black` && eval \"exec $exe\"")
Any idea?
Thanks in advanced.
Last edited by n0dix (2012-03-16 02:53:59)

Well got it working again, look for this post. And changed my file to the following:
[ ((modMask, xK_Return), spawn $ XMonad.terminal conf)
, ((modMask, xK_F2 ), spawn "dmenu_run -fn -*-profont-*-*-*-*-12-*-*-*-*-*-*-* -nb black -nf rgb:a0/a0/a0 -sb rgb:00/80/80 -sf black")
Thanks anyway

Problem with the Arabic vowelization in V 4.0 although we didn't face this problem with the previous versions ,so please fix it up quickly

There is a problem with the arabic vowelization in the browser version 4.0 although we didn't face this problem with the previous versions ,so please fix it up quickly because it affects on our work

Do you have an Arabic version of Firefox installed which isn't displaying the vowelization correctly, or are you trying to read it using an English language version?
There are a few add-ons for Arabic which might possibly help here: [https://addons.mozilla.org/en-US/firefox/search/?q=arabic&cat=all&x=0&y=0 Arabic add-ons]

Problem with the active version of the transfer rule ABAP program with sour

Hi,
I have a problem with the active version of the transfer rule ABAP program with source system EXCEL.
The system does not react to changes done in the transfer rule coding. For FISCPER I have hardcoded the result 'BABABA' and still the results delivered are those from the CSV.
Resetting the system buffers does not help. The problem is systematic in combination with source system EXCEL (i.e. not only 1 InfoSource). Checking the active program Extras->Display Program shows the coding (result='BABABA') being there, but
as stated, the system does not produce the result BABABA, but instead the result of the CSV.
It seems as if the original version from the very first activation of the transfer rule program remains somewhere and continues to be used. Does anybody know how to flush it out and get the system to actually use the coding appearing as the active program.
I have posted an OSS note, but SAP takes it time to answer and I am under time pressure so I figured that maybe one of you know who to solve it before SAP does.
Greetings and thanks,
Martin

Hi martin,
just try to go out the RSA1 and then return to your infopac. ...
sometimes there some "cache" trouble

Watermark problems in 5.4 version

Similar Messages

Maybe you are looking for