Watermarking program with time stamps?

Hi all,
Just curious to see if Acrobat Pro has a feature where I can add a watermark both at the top, bottom and middle-diagonal with name and timestamp of date opened/accessed or created. I've been looking all over and have only found a watermarking option but no time stamp feature.
Any help woudl be greatly appreciated, and I'm sorry if this is in the wrong subforum.
Thanks.

Are you sure you want a watermark?
Reader cannot add the OCG watermark layer!
You can create  watermarkFromText with JavaScript but you cannot update or remove a watermark with JavaScript.
You can create a string value of formatted date and time object from the system date time object.
So one could combine the create watermarkFromText and compute the text string for the date and time from the system date and time or form info creation date or modified date.
Have you considered using read only form fields?

Similar Messages

  • Mail attachment with time stamp

    Hi
    My scenario is Proxy to Mail.
    On receiver side I am getting the data as an attachment but i want that attachment with time stamp.
    How to add time stamp to the attachment in reciever mail adapter.
    Regards
    Sowmya
    Edited by: Sowmya on Aug 28, 2008 12:24 PM

    hi sowmya,
       The bellow link for MessageTransformBean..
      [http://help.sap.com/saphelp_nw70/helpdata/EN/57/0b2c4142aef623e10000000a155106/content.htm]
      In that ContentDisposition is used to fill the value for Attachment file name..
      Its allows the value accordingly "RFC1806" Note..
      RFC1806 allows accordingly RFC822 ..
      Check RFC822 ..
        5.  DATE AND TIME SPECIFICATION
    Regards,
    Prakasu

  • File name for append processing mode with time stamp

    Hi Experts
    we are doing file to file scenario using the processing mode as Append.
    the requirement for us to append the files and we need to have new file name with time stamp added to the appended file.but in the processing mode of the file adapter either we can append or add time stamp. thatz the problem I am facing now.
    we are doing file based processing not message based ,micheal blog regarding the dynamic file name is for message based not for file based.
    Please provide your valuable comments.
    Thanks
    Faheem

    Hi mohamed,
                      I suggest you to map the target source structure to the required filename u want, like for example ur filename is input26062008.txt means to the target structure u perform the following mapping
    constant (input) concat with currentdate function --> concat with constant .txt --> map this concat to target. So u will get the filename u expected with the time.
    Then in the communication channel u select the mode as append. Now ur requirement will get solve i think so. plz try.
    Regards,
    Murugavel

  • How to read multiple Digital samples and plot a chart with time stamps

    Hi,
     Could anyone send me a code that:
    1. Reads 'multiple samples(lets say 4) from single digital input' 
    2. 'plot digital data as a chart with time stamps'
    3. Find frequency
    4. Log data into file with time stamps
    I have attached the code which i tried.
    Thanks,
    LK
    Attachments:
    DigitalNSample.vi ‏27 KB
    DigitalNSample.vi ‏27 KB

    Hi,
     Could anyone send me a code that:
    1. Reads 'multiple samples(lets say 4) from single digital input' using NI USB 6009 or NI USB 6251.
    2. 'plot digital data as a chart with time stamps'
    3. Find frequency
    4. Log data into file with time stamps
    I have attached the code which i tried.
    Thanks,
    LK
    Attachments:
    DigitalNSample.vi ‏27 KB

  • TDMS viewer not showing data with time stamp

    Need help with time stamping data in a TDMS file generated by DAQ Assistant.
    When I use the TDMS Viewer, with the x-scale set to absolute time, the date starts at 1903. If I use Excel to look at the file the start time is correct (i.e. 2013).
    Solved!
    Go to Solution.

    Bo_Xie, I have simplifed my VI and now able to display the correct time stamp. Thank for your time!

  • Advertisement Details of Specific Computer with Time Stamp

    Hello Guys,
    Could you please help me how to get Advertisement Details of Specific Computer with Time Stamp?
    Thanks in Advance.
    Mukhyaprana

    It's true that there is no reliable install date, but IMO last status time for an advertisement is usually close enough. 
    Select r.name0, adv.advertisementname, stat.laststatename, stat.lastexecutionresult, stat.lastStatusTime
    from v_r_system r
    inner join v_clientAdvertisementStatus stat on stat.resourceID = r.resourceID
    inner join v_advertisement adv on stat.AdvertisementID = adv.AdvertisementID
    where r.name0 = 'clientname'
    order by adv.advertisementname

  • Apache Trinidad is running with time-stamp checking enabled.

    Experts,
    Contents of my web.xml file
    <context-param>
        <description>If this parameter is true, there will be an automatic check of the modification date of your JSPs, and saved state will be discarded when JSP's change. It will also automatically check if your skinning css files have changed without you having to restart the server. This makes development easier, but adds overhead. For this reason this parameter should be set to false when your application is deployed.</description>
        <param-name>org.apache.myfaces.trinidad.CHECK_FILE_MODIFICATION</param-name>
        <param-value>false</param-value>
      </context-param>When my application runs i get the following on the weblogic console
    <ViewHandlerImpl> <_checkTimestamp> Apache Trinidad is running with time-stamp checking enabled. This should not be used in a production environment. See the org.apache.myfaces.trinidad.CHECK_FILE_MODIFICATION property in WEB-INF/web.xml
    <UIXEditableValue> <_isBeanValidationAvailable> A Bean Validation provider is not present, therefore bean validation is disabled
    Isnt it a bit strange ? Please advise what is wrong.
    thnks
    jdev 11.1.2.1

    If you're talking about the integrated WLS, time-stamp checking is automatically enabled no matter what so that changes you make in the IDE can be picked up. It's nothing to worry about.
    John

  • Inserting Current Date with time stamp in oracle database

    Hi Experts,
                     I want to insert the current Date and time stamp in a field in the Oracle Database Table.
    I am able to insert date but i am not able to insert the date with time stamp. Any Suggestions??
    Thanks
    Naveen

    Naveen,
    Do you want to get current date (from sysdate) with a specific format or transform a value containing a date/time value to insert it in ORACLE ?
    Usually, you insert current datetimestamp in a date field using this :
    TO_DATE(sysdate,'dd/mm/yyyy hh:mi:ss')
    you may have to tweak the format pattern ('dd/mm....') according to your needs
    if you want to transform a date, use something like this:
    TO_DATE(your_date,your_format)
    but make sure your format is compliant with your date, ie
    TO_DATE('31/12/2008','MM/DD/YYYY') could raise error (litteral does not match) cuz ORACLE can't recognize 31 as a month pattern
    Chris

  • File with time stamp

    Hi All,
    I using RFC to file scenario ,in this when file is created it folder it is coming with date and time stamp.but i am not using add time stamp in processing paramerts.i have checked the file name in communication channel monitoring it is coming without timestamp
    but in folder file is getting created with time stamp.
    Regards

    Hi Gangadhar,
    In the receiver file adapter, under Processing tab, see the value of File Construction Mode.
    This value should be Create instead of Add Time Stamp.
    After making the changes save & activate the file receiver channel. The output file then will not have timestamp appended to its name.
    Regards,
    Gautam Purohit

  • Bounce with time stamp

    hi, is there a way to bounce with time stamp in logic? can logic automatically put time stamped files in the right place in the arrange window?
    thx, w

    Hi, Acmarie.
    Thank you for visiting Apple Support Communities. 
    To see what time a message was sent or received. Drag any bubble to the left.  Below, I have included the user guide which references this new feature on page 66. 
    iPhone User Guide
    Cheers,
    Jason H. 

  • Where clause with time stamp

    Hii,
    I have an issue with using where clause with time stamp. My requirement is to
    select * from driver_on_policy
    where last_change_datetime = '2001-03-06 19:00:06'
    date is in this form 6/3/2001 7:00:06 PM
    thnks
    sam

    If you want to use '6/3/2001 7:00:06 PM', then
    where last_change_datetime = to_timestamp('6/3/2001 7:00:06 PM','DD/MM/YYYY HH:MI:SS PM')If you can use a literal string in ANSI standard YYYY-MM-DD HH24:MI:SS format, then just
    where last_change_datetime = timestamp '2001-03-06 19:00:06' (That 'DD/MM' might need to be switched around to 'MM/DD' if you are in America.)
    Message was edited by:
    William Robertson

  • Can someone help with a previous post labeled "Writing to a data file with time stamp - Help! "

    Can someone possibly help with a previous post labeled "Writing to a data file with time stamp - Help! "
    Thanks

    whats the problem?
    Aquaphire
    ---USING LABVIEW 6.1---

  • Can't show 7PM with Time Stamp Control

    Maybe it's just me, but I can't seem to get any time stamp controls to accept 7PM as an entry.  
    ....this is kind of a problem for the data entry I'm supposed to be doing this weekend.  
    Any workaround?
    Patrick Allen

    Thanks for the reply Guenter.
    It's very strange.  Even after shutting down LabVIEW and starting with an entirely new VI, the time stamp control always displays 00:00:00 when I try to enter 7PM.  
    I've tried changing the defaults to just about everything.  But it's always the same behavior.
    For my work around I decided to just use Excel for all my raw data entry.  I'll write program to stuff it all in the database later.
    *edit*
    I just downloaded the attachment on your reply.....and it worked just fine.  
    I'm uploading the entire .vi now.   This is bizare.  
    Message Edited by pallen on 10-03-2009 05:44 PM
    Patrick Allen
    Attachments:
    time stamp weirdness.vi ‏6 KB

  • Graph plot with time stamp

    Hello All,
    In my attached VI I am facing some issues.
    My loop rate is 100ms and in chart plot data is not appering as per the x-scale(Time stamp). Values are just plotting in the chart without time. I am trying to implement a graph program that should show values according to time loop rate can be different. 
    In attached VI I have chart and XY graph both. Please have a look and suggest me the valuable modifications.
    Thanks and Regards
    Himanshu Goyal | LabVIEW Engineer- Power System Automation
    Values that steer us ahead: Passion | Innovation | Ambition | Diligence | Teamwork
    It Only gets BETTER!!!
    Attachments:
    Graph.vi ‏14 KB

    Hello Ben,
    Thanks for your valuable inputs.
    I don't have waveform data from the field, its only RS232 communication and each and every 100 ms interval I am getting only one value from the device. Now in current program I am using the chart function. But the value(Y-Axis) and the time(X-Axis) sync in not proper. To avoid this i am planning to implement this using XY Graph so I develop this sample VI. Here if you browse and observer in the code I have both chart and XY graph, in chart you can see my current implementation. If you run this code for few seconds you will get some difference in Y-Axis and X-Axis values plot time difference.
    Now If I am talking about XY graph on X axis I can send my system time with the field value to avoid this chart issue. (I am trying to implement same in XY Graph)
    Today I achieve the target by done offset and some chart property settings. Now I am looking for same in XY Graph.
    Thanks and Regards
    Himanshu Goyal | LabVIEW Engineer- Power System Automation
    Values that steer us ahead: Passion | Innovation | Ambition | Diligence | Teamwork
    It Only gets BETTER!!!

  • Write signal with time stamp

    hii...
    I've a student project to read and write data from a continous signal with labVIEW.. I'm going to read the system for 24/7, The reading program already finished.
    The problem is in the writing procces.. I have no idea how to write data to file with low level vi.. I'm new in LabVIEW and I already try some modification to my program but it still don't work as i want.
     I want the writing procces only occur when i press the button and it only run for a few second with constant time stamp.. It just to check if there are any data missing or not.. The system are a fast (It's what make problem bigger).
    I'm getting crazy at all.. If some one could help me i will be very grateful... I'm using LabVIEW 8.5 and PCI 6259...
    Kind Regards,
    Dani
    -Keep Learning-
    Attachments:
    Read Circle Encoder.gif ‏22 KB

    Hi Dani,
    here's the two-loop version...
    When you use the local you wouldn't need the queue at all... But using locals may lead to race conditions (not in your simple vi, but general) - locals don't provide "atomic" data access.
    In Labview the wire is equivalent to variables in text programming languages!
    The vi uses the producer-consumer-scheme (Erzeuger-Verbraucher-Struktur ?): one loop is producing values, the other is consuming them. It's a common scheme in LV programming, you will find examples and a lot of threads here in the forum.
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome
    Attachments:
    circle.vi ‏48 KB

Maybe you are looking for

  • Wrong file naming on latest installation ISO

    Hi all. I whose trying to install Arch from latest installation ISO without any success. I whose thinking that whose problem with UEFI and USB combination, similar to this Boot USB installation as EFI I've whose getting same output as on this screens

  • Not signing in

    my skype wont sign in at all, the app wont even open anymore. there is a grey skype box in the top bar but its all greyed out. nothing is loading.

  • Session problem in excel sheets

    Hi. I am using JDeveloper 9.0.3.3 and Excel 2002. When I try to open a JSP page in a excel sheet the session data can not be received. Is there a way to avoid this because I need that data for authentication issues.

  • Document of Settings of Central Administration

    Hello out there, I have googled a while to find a way to document the configuration of the "Central Administration". But I couldn't find any result which fits to my requirement. Maybe somebody in this community can give me an hint how to realize it i

  • UD  Insp. Lot for Vendor Source Inspection

    Experts, I set up Vendor Source Inspection for some of our parts. Customizing setting for Rejected is "Create New Lot". So in case of a "rejected" UD  before GR I get a second insp. lot after GR. Both insp. lots are refering to the same PO, but I see