Wats the use of reward points in this site

wats the use of reward points in this site
Senthil

From whose point of view?
From the point of view of the originator of the post
--> people will be encouraged to answer your questions because you told them how valuable their answers were.
From the point of view of the people who answer
--> It will tell them if they are on the right track or not in understanding and providing the answer for your question
--> It will give them a sense of satisfaction that they were able to help someone
--> It works as an indirect measure for their knowledge
From the point of view of others searching the forum
--> It will tell them that someone else had the same or similar issue and they got n number of answers and the points will tell how close each one of them are to the ultimate resolution
From the point of view of SAP
--> It attracts people to the forum, which generates more visbility for their products.
--> They can find patterns and may be breakthrough thinking presented in the forums that they may use in their product development
--> If more and more people share their knowledge and help each other in resolving their issues, then the cost of ownership of their products will be lower for the customers and so they will stay with SAP products.
--> and many more
Above all, your points will allow me to gain one more T-shirt or Ipod or some of the cool things that SAP is giving top contributors.... so why not!!!..} Right? Wrong, it is the recognition and acceptance that you gain from others that inspires you to learn more and contribute more...
Happy SDNing..)
Srinivas

Similar Messages

What is the use of change pointer technique in IDOC

hi
could anybody suggest me
what is the use of change pointer technique and how to use it
thank you
kalyan.

Change pointers are used for changes to the master data objects are flagged for distribution by SMD Tool.i.e.shared Master Data.
You need change pointers to distribute changes with the ALE SMD tool. If you do not use this tool, you do not need to write change pointers.
You can deactivate change pointers and activate them again with the transaction BD61
The SMD tool is connected to the change document interface. If the master data changes are to be distributed, the application writes a change document. The contents of this are passed to the SMD tool. The tool writes change pointers, reads the application data and creates the master IDoc.
The master IDoc is then passed to the ALE layer, which sends it to all interested systems.
The change pointer tables (BDCP und BDCPS) should be as small as possible. Use as few change pointers as possible and delete change pointers which you no longer need.
You can increase the rate of processing by using the Analyze Change Pointer and Reorganize Change Pointer functions.

What is the use of change pointer concept in ale?

what is the use of change pointer concept in ale?
Edited by: Alvaro Tejada Galindo on Feb 6, 2008 5:10 PM

ALE Architecture:
It consists of an Outbound process, an Inbound process, and an Exception Handling process.
Outbound Process:
ALE Outbound Process in SAP sends data to one or more SAP Systems. It involves four steps.
1. Identify the need of IDoc: This step starts upon creating a application document, can relate to a change to a master data object.
2. Generate the Master IDoc: The document or master data to be sent is read from the database and formatted into an IDoc format. This IDoc is called as a Master IDoc.
3. Generate the Communication IDoc: The ALE Service layer generates a separate IDoc from the Master IDoc for each recipient who is interested in the data. Separate IDocs are generated because each recipient might demand a different version or a subset of the Master IDoc. These recipient-specific IDocs are called Communication IDocs and are stored in the database.
4. Deliver the Communication IDoc: The IDoc is delivered to the recipients using an asynchronous communication method. This allows the sending system to continue its processing without having to wait for the destination system to receiver or process the IDoc.
Inbound Process:
The inbound process receives an IDoc and creates a document in the system.
1. Store the IDoc in the database: The IDoc is received from the sending system and stored in the database. Then the IDoc goes through a basic integrity check and syntax check.
2. Invoke the Posting Module: The control information in the IDoc and configuration tables are read to determine the posting program. The IDoc is then transferred to its posting program.
3. Create the Document: The posting program reads the IDoc data and then creates a document in the system. The results are logged in the IDoc.
Over view of IDocs:
IDoc is a container that is used to exchange data between any two processes. The document represented in an IDoc is independent of the complex structure SAP uses to store application data. This type of flexibility enables SAP to rearrange its internal structure without affecting the existing interface.
IDoc interface represents an IDoc Type or IDoc data. IDoc Type represents IDocs definition and IDoc Data is an instance of the IDoc Type.
IDoc Types:
IDoc type structure can consist of several segments, and each segment can consist of several data fields. The IDoc structure defines the syntax of the data by specifying a list of permitted segments and arrangement of the segments. Segments define a set of fields and their format.
An IDoc is an instance of an IDoc Type and consists of three types of records.
i. One Control record: each IDoc has only one control record. The control record contains all the control information about an IDoc, including the IDoc number, the sender and recipient information, and information such as the message type it represents and IDoc type. The control record structure is same for all IDocs.
ii. One or Many Data records: An IDoc can have multiple data records, as defined by the IDoc structure. Segments translate into data records, which store application data, such as purchase order header information and purchase order detail lines.
iii. One or Many Status records: An IDoc can have multiple status records. Status record helps to determine whether an IDoc has any error.
Message in IDoc Type:
A Message represents a specific type of document transmitted between two partners.
Outbound Process in IDocs:
Outbound process used the following components to generate an IDoc. A customer model, and IDoc structure, selection programs, filter objects, conversion rules, a port definition, an RFC destination, a partner profile, service programs, and configuration tables.
The Customer Model:
A customer model is used to model a distribution scenario. In a customer model, you identify the systems involved in a distribution scenario and the message exchanged between the systems.
Message control:
Message control is a cross application technology used in pricing, account determination, material determination, and output determination. The output determination technique of Message control triggers the ALE for a business document. Message control separates the logic of generating IDocs from the application logic.
Change Pointers:
The change pointers technique is based on the change document technique, which tracks changes made to key documents in SAP, such as the material master, customer master and sales order.
Changes made to a document are recorded in the change document header table CDHDR, and additional change pointers are written in the BDCP table for the changes relevant to ALE.
IDoc Structure:
A message is defined for data that is exchanged between two systems. The message type is based on one or more IDoc structures.
Selection Program:
Is typically implemented as function modules, are designed to extract application data and create a master IDoc. A selection program exists for each message type. A selection programs design depends on the triggering mechanism used in the process.
Filter Objects;
Filter Objects remove unwanted data for each recipient of the data basing on the recipients requirement.
Port Definition:
A port is used in an outbound process to define the medium in which documents are transferred to the destination system. ALE used a Transactional RFC port, which transfers data in memory buffers.
RFC Destination:
The RFC destination is a logical name used to define the characteristics of a communication link to a remote system on which a function needs to be executed.
Partner Profile:
A partner profile specifies the components used in an outbound process(logical name of the remote SAP system, IDoc Type, message type, TRFC port), an IDocs packet size, the mode in which the process sends an IDoc (batch versus immediate), and the person to be notified in case of error.
Service Programs and Configuration Tables:
The outbound process, being asynchronous, is essentially a sequence of several processes that work together. SAP provides service programs and configuration tables to link these programs and provide customizing options for an outbound process.
Creation of IDoc:
Basic Type:
Basic IDoc type defines the structure and format of the business document that is to be exchanged between two systems.
Segments:
Segments form the basic building blocks of an IDoc type and are used to store the actual datta. A segment type is the name of a segment and is independent of the SAP elease. A segment definition is the release-specific name of a segment.
Steps in creating Segments:
T.Code WE31
Enter the name for your segment type and click on the create icon.
Type the Short text.
Enter the variable names and data elements.
Save and Go back.
Go to Edit -> Set Release.
Repeat the steps to create more segments.
IDOC TYPE:
Business data is exchanged with an external system using the IDoc Interface.
IDoc types (Special Structures) An IDoc type is defined through its permitted segments. Segments can be dependent on each other (parent and child segments). The IDoc interface can check for each IDoc whether thhe segments contained are compatible with thhe definitiion of its type. This systax check is activated or deactivated in the Partner Profiles.
Steps in creating IDoc Type:
T.Code WE30 to create IDoc Type.
Enter the Object Name, Select Basic Type and click Create Icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDoc name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press enter
The system transfers the name of the segment type to the IDoc editor.
Follow these steps to add more number of segments to Parent or as Parent-child relation.
Save it and go back.
Go to Edit -> Set Release.
Message Type:
Steps in Creating Message Type:
T.Code WE81.
change the details from Display mode to Change mode
After selection, the system will give this message "The table is cross client (See help for further info)". Press enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back.
Assign Message Type to IDoc Type:
T.Code WE82
Change the details from Display mode to change mode.
After selection, the system will give this message "The table is cross client (See help for further info)". Press enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back.
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Feb 6, 2008 5:10 PM

My iPod touch was stolen and recovered. I can use my Apple id for this site but the theif changed the Apple id needed to update apps etc and I do not know how to delete his acct. Any help with this will be greatly

My iPod touch was stolen and recovered. I can use my Apple id for this site but the theif changed the Apple id needed to update apps etc and I do not know how to delete his acct. Any help with this will be greatly appreciate

If the thief enabled activation lock on the device, then there is nothing that can be done. Only the password for the Apple ID that it is locked with can disable activation lock.

Wats the use of Listener file in oracle

wats the use of Listener file in oracle.

Hi Rajesh !
The listener.ora file describes the environment within which requests for remote connections are serviced. When the listener process is running on a machine, connection requects are intercepted on the specified ports and passed to the database.
The listener trained to listen on a certain port , passess connections thru' to ORACLE 9i server when they contain proper authentication details.
listener.ora file consists of the following elements:
+ Listener's name
+ Protocol addresses that it is accepting connection requests on
+ Services it is listening for
+ Control parameters
By default, the listener.ora file is located in the $ORACLE_HOME/network/admin directory on UNIX operating systems and the ORACLE_HOME\network\admin directory on Windows NT.
It is possible to configure multiple listeners, each with unique name, in one listener.ora file FYI !!
~ Chinmay
~ Happy Working !!

Wats The UsE of the Dock Thing???

wats the use of the dock thing i got with my classic 80 gb....me myself cant find any use of it.....

The iPod adapter is also used by a number of iPod speaker docks (i.e those which employ the design of the iPod universal dock), some of which expect you to provide your own adapter.

How can I allow or block the use of local storage by specific sites for all users in my domain.

How can I allow or block the use of local storage by specific sites for all users in my domain.
I tried to do this by MMS.cfg but it is not working, the problem is also described in your blog "http://forums.adobe.com/message/3272907".
What I Want -: "I want to allow youtube for all the users in my domain and this should be listed in Control panel-->flash player-->storage-->local storage setting by site-->websites tab."

Wow, cor-el... Did you -intend- your reply to be inane, inappropriate and completely inapplicable?
How would that possibly do what I asked?
You -might- consider '''''reading''''' the question, -=before=- you reply. And it's really okay to NOT REPLY if you just don't know. Just an idea.
Feel better, real soon.

I am trying to set up my new iPad 2 and to begin I installed iTunes on my laptop and connected the iPad to the USB port. Neither Windows or iTunes recognizes the device. I did everything this site told me to try and still no luck. Help!

I am trying to set up my new iPad 2 and to begin I installed iTunes on my laptop and connected the iPad to the USB port. Neither Windows or iTunes recognizes the device. I did everything this site told me to try and still no luck. Help!

You will not be able to see what version you are running until the iPad is activated. It will be in Settings>General>About >Version when you can get to the settings app.
The slider bar that you are describing sounds like the screen lock side switch and that has no bearing on setting up the iPad or connecting to WiFi.
Why don't you try rebooting your router? Unplug it for about 30 seconds and then plug it in again and see if the iPad will recognize and join the network.

Is there a way to display again the description field by clicking on the gold star near the url (useful to type memos about this site)?

In the previous versions of Firefox, when you click on the star near the url, you can add this website on your favorites. Another click and you can edit some fields about this bookmark, like the url, the folder, etc...
But with FF17, the Description field is no longer there. You can only find it when managing your bookmarks, that is not really user friendly.
Is there a way to add again the description field when clicking on the gold star? It's very useful for adding notes about this website, and it's also synch with addins like Xmarks

Add code to the userChrome.css file below the default @namespace line.
*http://kb.mozillazine.org/userChrome.css
The customization files userChrome.css (interface) and userContent.css (websites) are located in the chrome folder in the user profile folder.
*http://kb.mozillazine.org/Editing_configuration
<pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
#editBMPanel_descriptionRow { visibility: visible !important; }
</nowiki></pre>

What is the difference between "Delete" & "Forget about this site" when deleting a single item in the 'History' as a 'customising' procedure ?'c'

I am still using Firefox on Windows XP

Using "Forget About This Site" will remove all data stored in Firefox from that domain like bookmarks, cookies, passwords, cache, history, and exceptions, so be cautious and if you have a password or other data from that domain that you do not want to lose then make sure to backup this data or make a note.
You can't recover from this 'forget' unless you have a backup of the involved files.
It doesn't have any lasting effect, so if you revisit such a 'forgotten' website then data from that website will be saved once again.

Firefox is currently running survery with Kamplye 4 big pond news. Why is it inturupting the use of my computer. unable to sites to load. Facebook hotmail Youtube

Please all i am asking is when is this Survey going to stop. I would like to use my computer to its fullest. The survey is disrupting the use of my computer'''

Firefox may be slowed down by the use of other software or many addons and certainly could be impacted directly by malware or by processes malware starts.
With the name ''FirefoxinUbuntu'' I may not have expected you to be using Windows.
Note we already give general advice in these articles that covers much of what you say
*''' [[Troubleshoot Firefox issues caused by malware]]'''
* [[Firefox is slow - How to make it faster]]
* [[Firefox uses too many CPU resources - How to fix]]
The articles have slightly different versions for Windows Mac and Lynux users.

I cannot understand any of the instructions to email my photos from iPhoto - I don't know why it will not work. I believe I have tried all the answers I have seen on this site (which are confusing to me). HELP!

I have been trying to email someone some photos (only 10) from iPhoto. That darn pop-up window keeps popping up, telling me to check my email server, etc. I have NO idea what to do. I have tried doing what other posters have suggested - to no avail. Is there someone who can tell me what to do using non-tech language? This is SO frustrating...

Hi ..
It's just a matter of giving iPhoto your email reader.
Quit iPhoto if it's open.
Open the Mac Mail app.
From the Mail menu bar click Mail > Preferences then select the General tab.
Select your mail accoun tfrom the: Default email reader pop up menu.
Relaunch iPhoto.
Select a photo then go to the iPhoto menu bar click Share > Email

Whats the use of assigning price list to site

hi ,
Why we assign price list in site (wb01) merchandise category?is that price list the same which i assign in "assign pricing type/reference site to organisational levels" in sales price calculation.explain me whats the use of assigniing the price list in siter(wb01) merchandise category which we will find on the top screen inside the site master
regards
krish

Hi Krish
Price list are assigned to article through MC at site master, no where else we define price list with article. When you run WPMA to transfer article price to stores, system will look at assigned price list with MC at site master then transfer the price.
Price list assign at organisational level will help system to find which pricing procedure to be used and which store Net purchase price to be taken for calculation.
Best Regards
Swami

Does an ipad have any storage? Basically looking to eliminate DVD's and just use the storage on my movies (in iTunes) could I just get an external hard drive or what is the basic purpose selling point on this apple tv?

i would ideally like to not use all my macbooks memory either and we have an xbox so all the streaming for like netflix we can do on this. I guess thats why I'm wondering if it is a better idea and if it is possible for us to just utilize an external hard drive. And if we do that will i have more space on my computer?

davidfrombillings wrote:
I thought I could just drag and drop my iTunes library to an external hard drive.
it'll work ... if done properly ☞
copy the entire iTunes folder (not just the iTunes music or media folder) from <MacintoshHD>/users/<yourname>/music on your Mac to the external, then launch iTunes while holding the option (⌥) key, click on choose library when prompted, and select the iTunes folder on the external.
if I already have my iTunes going to the incorrect files how is it going to find the correct files again.
you could try if this script helps:
iTunes Track CPR v1.3
This script attempts to locate the files of so-called "dead tracks"--iTunes tracks designated with (!)--that you assume are not actually missing but are still located in the iTunes Music folder in their "iTunes File Order" (Music -> Artist -> Album -> file.xxx)."
Eric Ross wrote:
When you moved the file back did you go back into iTunes in your preferences and select the advance tab and then selected the location again or where your files are
the iTunes media folder location in preferences > advanced tells iTunes where to put new additions to your library, not where your content currently is.

Wat The Use Of PIN2 Code...!

Hello Nokia Care,
That My Frnd Use Wrong Number For PIN 2 Code.....
Nw That Asking The Final Attempt Of PIN2 Code...
Where Will Get PIN2 Code Or It No Use For Phone Lock R If I Tried Once It Will Lock R Wat...
Give Me Solution..
KamIsBack
Solved!
Go to Solution.

Refer THIS

Wats the use of reward points in this site

Similar Messages

Maybe you are looking for