.wav audio file not syncing up to project

I have a project of a concert that i have recorded in DV/NTSC 29.97fps and 48kHz rate for audio and wanted to sync a master audio .wav file, replacing the original audio from the recording but at the end of the set, the audio goes out of sync. I tried to export the audio file from a sequence w/ 29.97 fps and used the exported audio file on the concert and it is still doing the same thing. Its there something i am not doing right?

I believe that there's your problem - because 30fps is not exactly the same as 29.97fps. It is 0.1% slower and that may be causing your drift. Try doing a speed change on your audio file (command-J) and just make it 101% of its original speed. See if that works?

Similar Messages

Overview for audio files not showing up in project.

I just got a new mac, transferred everything over, and everything is working great except...
I have lost the overviews of all of my wav files for one song.
please help ^_^
bp

"Does it display overviews of newly added audio files in the arrange?"
no it does not
"If not you would have to export tracks to audio files and import them into a new project file."
that would stink...
any other ideas, i really don't want to have to export all of those tracks, and then add the 40 or so plugins back in
also, bouncing over and over can create problems, so i prefer to only bounce once (final)
<Edited by Moderator>

How do I export separate really short wav. audio files?

Hey, I'm having a big problem with the exporting procedure using wav. audio files. For my editing project, a client asked me to export separate wav. audio file from a large audio sequence about a live auction, and he will use each 'bet' audio files for his website. For example, he wants each 'bet' that the auctioneer says to be put as separate wav file, so I cut each number individually with '1', '2', '3', '4', so on and so forth. However, when I'm trying to export each wav audio file for each number, all it came up with is general error message. Is it too short? If so, how do I export really short wav. audio clip? I'm really behind schedule and I don't think there's much of an alternative to send separate short audio files over to his e-mail. Let me know if I'm not making it clear.
Message was edited by: tommybone
Message was edited by: tommybone

I record voice tracks for slide shows that are online training packages that require WAV files.
Here's what I do. It's tedious but the workflow guarantees accuracy and repeatability.
Ingest.
Create master sequence of audio-only. Edit out bad takes. Using blade tool, slice track into separate sections for each slide. Make aditional edits in each slide's segment to take out bad takes, flubs.
Save early, save often.
Select all, adjust levels.
Select all, make independent clip. This step is crucial.
Back in browser, I create a new sequence and call it slide_01 and open the sequence. I go back to the Master, select one at a time the clips that are used for slide_01, use properties and rename them slide_01a, slide_01b, slide_01c. Copy them and paste them into the slide_01 sequence.
Repeat for every slide in the show, sometimes there are forty of the little basterds.
When I'm all done, I select all fo the slide sequences and use batch export.
Making the clips independent means they can be easily edited without referring to the original media. Using batch export means they allgo to the same location with the same settings.
bogiesan

I am trying to edit a .mov video in Premiere Elements 12, but the video and audio do not sync. They work fine when played in Quicktime.

Hello,
I am trying to edit a .mov video in Premiere Elements 12, but the video and audio do not sync as soon as I load it into the program. It appears to work fine in Quicktime.
Thanks in advance.

mbgoodwi
Thanks for the reply. This is the plan.
Open Premiere Elements 12/12.1 to the Expert workspace.
In the Expert workspace, go to File Menu/New/Project and Change Settings.
In the Change Settings area, select the project preset
NTSC
AVCHD
AVCHD LITE 720p30
OK out of there. In the New Project dialog that appears, note that it has your new project preset named.
Be sure to put a check mark next to "Force Selected Project Setting on This Project". And, then OK out of there.
Back in the Premiere Elements 12 Expert workspace, use Add Media/Files and Folders to bring your video
into Project Assets. From Project Assets drag your video to the Timeline Video Track 1/Audio Track 1.
Is there an orange line over the content in the Timeline. See screenshot for orange line to which I am referring.
There should be no colored line over the content if the project preset matches the video properties. But, if you do see
that orange line, then render the Timeline content by pressing the Enter key of the computer main keyboard or press
the Render button above the Timeline.
Do your video/audio now play back in the Edit area monitor in sync?
Please let us know the result, and then we will decide what next.
Thanks.
ATR

Logic Pro X: Audio file not found?

I have Logic Pro X, and this problem has never occurred before but...
I was mixing one of my songs and everything was perfect, then I made sure to save it.
As I reopened literally 10 seconds later (not sure why I even closed it) it was showing me a message that said "Audio file not found"
At least 12 audio files went missing out of nowhere. It's only the files recorded from Logic that are not found.
I tried to locate them through my Finder but I don't know where my audio files are stored onto my macbook, and it doesn't seem to be in an easily accessible place.
It's just weird because they were all fine just before I closed Logic, then they disappeared.
I checked the audio bin in Logic and they seem to be there but they seem corrupted.
If anyone can help, or at least show me where audio files are stored on your mac from recording through Logic, that may help.
Thank you.

To clarify:
Logic Pro X
I have also experienced this issue as a result of having recording delay set other than zero, and rectified it by returning to 0.
Otherwise,
[Command 8] or
Window > Open Project Audio, select audio files that appear flatline, click 'Audio File' menu at top left, click 'Refresh Overview(s)'.
No way I know of to auto-enable this.

When i try to open my projekt in logic pro x it say audio files not found?

when i try to open up a projekt in logic pro x it say audio files not found why is this heppends?

This error typically means the audio files you used in this project are no longer found in their original location.. (did you move or delete them?) or you have renamed the audio files..... or they were located on an external HD etcand that drive or disk is no longer available.... because its not plugged in.

Logic X EXS24 - audio file not found

I know this question crops up often and is usually a Garageband/missing downloadable contents issue but that's not the case here.
I'm a long time Logic user (pre Apple) and can usually work my way around issue or find answers online, but I'm completely stuck with this one.
I've been running my current setup for about eight months now (new Mac Pro, latest versions of Logic Pro and OS) with no problem at all.
I have an extensive sound library stored on external drives (Pegasus2) via Firewire and everything has been zipping along, then yesterday for no know reason EXS24 suddenly gives me the "audio file not found" message when trying to create a new instrument.
All previously created EXS24 instruments load just fine as the audio files were copied onto the project drive, but Logic no longer sees the library on my external drive.
The external drive is working just fine (troubleshooting shows no errors or issues) and I can access it just fine, load sounds into other applications etc), I can also manually drag individual samples into my EXS24 instrument so that it "sees" them, but very impractical to do this with so many audio files, and obviously that's not how it's supposed to work.
I thought I had found a workaround yesterday by making an alias of the folder containing the sound library and copying the alias to User/Music/Audio Music Apps and that worked while I was working yesterday, but on loading Logic today the problem is back.
I've reindexed the drive in question with Spotlight..
As mentioned, this setup has worked for months (and for years on my previous hardware) but suddenly Logic can no longer see those files via EXS24.
Any suggestions as to why this suddenly happened, and more importantly, on a permanent fix?
B.

It doesn't really matter where you put the samples, as the EXS will search for them when you try to load an instrument that references them.
The reason why the "davidfelton" bit is in there, is that the location of the samples is stored inside EXS files. At load time, if the samples are not at that location, the EXS will search for them, and once found, will write the new location back to the EXS file so it doesn't have to search next time.
If the EXS cannot find your samples, then open the EXS preferences and make sure your default search locations will find the files (ie you don't have it set to look on one drive, when the samples are on a different one).
Or you can use the project managers "resolve" function to update the sample locations to all the EXS files in one go.
Any probs, post back...

Is there a way to make an audio clip not cover the whole project? I want to add audio clip or song and let it start at a certain point in the project. I'm working with iMovie on IPad!

Is there a way to make an audio clip not cover the whole project in iMovie? I want to add audio clip or song and let it start at a certain point in the project. Whenever I add audio or song it covers the whole project. I'm working with iMovie on IPad!

Thank you for your reply Karsten but unfortunately this didn't help me so far. Or maybe I'm missing something?
First the link is a tutorial for iMovie on a Mac. I'm using iMovie on iPad so the steps are inapplicable.
Second it is only possible for me to manipulate the end part of the sound clip to whichever duration I want. But I can't do the same with the 'beginning' of the sound clip.
I simply want to place some photos in the beginning of my video with no sound in the background then after like 2 secs I want to start the music clip. For some reason that is not possible! Cause every time I drop the music clip unto my project timeline it automatically place it self along with the first frame in the project! And consequently the photos and music are forced to start together.
Hope I'm making sense...

My Video and Audio are not syncing up after importing

I am trying to edit a few Ipad Clips in premier pro. My video and audio are not syncing. They are .mov lower resolution from the ipad. The original audio is fine - but after I put in a sequence the audio is off a few seconds (ahead). I did not add any affects or change anything. Please advise?
Thanks for any help in advance.
Allison

Premiere does not work well with variable frame rate video which, I expect, the ipad produces, You might have to convert the footage before you import it into Premiere. Do a forum search for variable frame rate, there are a lot of posts.

Play or download a WAV audio file stored in a BLOB

Hi all, I was hoping someone could point me to the proper steps to take to download or play a WAV audio file I have stored in a BLOB column (from APEX). I'm sure it's probably pretty easy, but I can't quite find exactly the right approach.
Basically all I want to accomplish is show a report, standard or IR, that will show some kind of link if there is a non-null BLOB value for a column -- the column only stores WAV audio files. I'd like the link (image, button, whatever) to either play the audio file directly (using whatever desktop player, plugin whatever the user might have), or at least prompt to download the WAV file for playback later.
Any advice on how to easily do this?
Thanks very much
David

Se this link: http://download.oracle.com/docs/cd/E14373_01/appdev.32/e13363/up_dn_files.htm#CIHDDJGF
Thank you,
Tony Miller
LuvMuffin Software
(281) 871-0950

ITunes 11.01 on Windows 8 audio will not sync with video

I have a new computer that is running Windows 8, and I have had no issues with iTunes 11.01 thus far on it other than the fact that when playing videos, the audio will not sync up with the video.
With the ineptitude that seems to define Apple as of late, there does not seem to be any actual support for Windows 8, and the "support" channels do no good at all.
Any ideas as how to fix this problem?

I think Microsoft made the Windows 8 incompatible with Apple products on purpose, they want windows users to have to download apps from their paid service which is more expensive than Apple's App/iTunes Store

Files not syncing...

Files not syncing in Creative Cloud, for the last two (?) weeks.......
I´ve tried everything, renaming the files, restarting, reinstall, you name it......nothing seems to work....
I´m working on Imac by the way...

Hi Klas,
A change has been made on the server which should address this issue.
Please quit the Creative Cloud application, then launch it again. You may see a message in the Files panel similar to "Updating file sync...". This should take just a few moments. When it is finished, you should be able to sync your files.
Please let us know if you are still unable to sync files after updating file sync. And I received you attached file, but it’s not the real log file, Can you resend the file in below location
Mac: /Users/<yourusername>/Library/Application Support/Adobe/CoreSync/
Windows: C:\Users\<yourusername>\AppData\Roaming\Adobe\CoreSync\
Thanks,
Jianfeng

Captivate 7 - HTML5 audio/slides not syncing

Hi,
I am trying to publish out to HTML5 (Captivate 7 with the patch on Windows 7). I have audio on each slide and if I just let it run straight through, it's fine. However, if I page forward the audio is not sync'd with the slide anymore. It looks like it take a little longer for the slide to catch up but the audio starts right away.
Also, if I go back and forth (I know this isn't right but I know learners are going to), sometimes I get audio from two slides playing at once.
Is this just an HTML5/audio issue or is this a Captivate issue?
Thanks,
Joy

Sreekanth,
I think I've found a workaround for this issue. I’m finding when audio is placed on each question slide in the pool, the audio on subsequent slides play. The audio on the question slides has to be different from audio used on non-question slides (but all the question slides can use the same audio). Also, the question slide audio can be a very short and silent piece of audio, so nothing is heard on the question slide itself.
Bruce

Audio file not support

Hi,
I am using a folio overlays for a digital publication and insert audio files. While inserting the audio file not supported. The following error was occurred. Please advice.

I've moved your question to the DPS forum.

TS1718 Movie audio does not sync with movie

Hi,
The movies I have bought through iTunes store does not work properly. I bought two last week and when trying to play them back over the weekend, the audio is not sync'd with the movie playback. I have a Winodws 8 laptop and enough space for the films to be played. The software is all up to date and can therefore see no problem as to why this should not be working. Does anybody know of any way to resolve this to allow me to watch the films?
Thanks,
G

Hello grs1989,
Thank you for providing the details about the issue you are experiencing with audio out of sync with video in iTunes. I found an article with steps to address issues with audio and video playback being out of sync:
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/ts1362
Thank you for using Apple Support Communities.
Best,
Sheila M.

.wav audio file not syncing up to project

Similar Messages

Maybe you are looking for