WAV Audio Track 2 silent when rendered

Using CS4/    i7 & 8 gig ram.
Thanks so much for your help in the past. I've just noticed something strange.
On the past couple of projects, the following happens:
Using Bill's suggestion, I changed the mp3 over to WAV with Audacity.  Everything works better.  However, there is another issue.
I have  imported a WAV music track into my project and placed it on audio track 2.  When I first start further editing on the project, the audio from track 2 plays fine.
However,  when I render the video, and audio render follows, track 2 does not play.   Track 1 plays fine.
1.  I can go to the preview panel and place the same audio file on track 3 and it will play fine................  or,
2.  I can exit from PP and when I restart PP and reopen the project, the track 2 audio will play fine.  If I do not render the audio when I render the video,Track 2 plays fine............
Why would rendering the audio shut off the sound?????  Any way around this situation?
  Tks,  Tom B.

You do not need Audacity. Premiere has a feature called Render and Replace.
Is this rendering the timeline or exporting out of Premiere?
You can do whatever works best.
Select audio clip, go to Clip, Audio Options, Render and Replace. THis will render the audio part to a wave generated by Premiere.
See how that works.

Similar Messages

  • Audio tracks missing when doing automate to sequence.

    Using PMW200 with 4 audio tracks. When dragging single file to timeline I get the 4 audio tracks. But when I do an automate to sequence, I only get 1 audio track, plus, the default audio transition is not going on.
    I have all the tracks highlighted and have ticked apply audio and video transitions.
    Any idea where I'm going wrong? Thanks
    Mike Ward

    Hi Kevin.  I uploaded a clip onto you tube for you to try, but you tube mixed the audio tracks so it was useless.
    Basically, drag any video clip with 4 audio tracks recorded from camera onto timeline in cs6, and all audio tracks appear on the timeline.  But automate several similar tracks to timeline and only one audio track gets added.  The other 3 do not appear.  Is there a work around for this, rather than dragging all on one at a time.
    Thanks

  • Audio tracks silent

    My project's audio tracks have become silent except the comments track. How to restore?
    Thanks in advance.
    (Première Elements 12)

    bermard
    No clues on this Premiere Elements 12 happening that has been reported by several users.
    I have tried to reproduce the problem to troubleshoot it and cannot reproduce it so that I can troubleshoot it.
    The ID Liamadude99 had the problem and believes she resolved it. She posted the following March 2, 2014
    "I was trying different things and I went to tools to narration. I removed the mute audio before recording, then deleted
    the narration I previously did and then pressed undo, to bring it back and my audio returned on my video. Very strange
    but it worked....."
    Please give that a try and then let us know if that worked for you. That would be a major contribution.
    Also a screenshot of your Timeline when the problem exists would be helpful to me to try to reproduce the problem.
    Thanks.
    ATR

  • How can I keep one of my audio tracks stationary when syncing multiple tracks?

    I am trying to edit a video that has external audio from an H4N recorder and internal audio from 2 Canon DSLRs. The internal audio is just there to help my sync everything and will be muted during output. From the H4N I have one long, continuous recording, but from the cameras I have shorter clips, not all of which happened exactly after the previous one.
    Here's the issue I'm having: when I sync the two video clips & the external audio early in the timeline, everything lines up (using the automatic synchronization based on waveform). However, when I am syncing clips later in the timeline, sometimes Premiere chooses to pull the external audio track FORWARD (thus bringing it out of alignment with the earlier video), rather than pushing the video tracks BACK (which is what I need).
    Is there some way to tell Premiere which tracks should and should not be moved during sync? If I lock the track, then I cannot use the sync function on it at all. I basically need a way to specify that one track should be used as the "anchor" and that others should be moved forward or backward as needed, without moving the "anchor" track.

    Cut up the 4n audio clip and synch it to its respective clips.

  • In GB, I need to insert an audio track. When I try, it obliterates part of the adjacent bridge (track). How can I insert an audio track in an audio timeline without stepping all over clean material? Is it possible to recover the "clean" track bridge?

    Am doing an audio timeline in GB. Need to insert a corrected section of track. When I try the insert, it knocks out the top part of the adjacent track bridge/element. How can I insert cleanly in a timeline? Is it possible to "recover" the good track that was "stepped on?"

    Undo what?
    Insert in a new track?
    I don't think so. I've started an audio book and I'm doing chapter long segments (assuming I can make simple corrections, such as ones made in iMovie and numerous other video editing programs. Routine edits in GB are simple and intuitive. I cannot wrap my mind around the fact that I'm prevented from doing a simple drag and drop, import or paste a two-sentence audio clip. Nor can I find any reference to straightforward audio elements.
    Any suggestions you might have would be appreciated.

  • Audio Tracks Disappear When Zooming on Timeline

    It's very strange, but whenever I zoom in on a certain portion of a timeline I'm working on, audio tracks warp, change, duplicate, or disappear altogether. See below for a video:
    Does anyone have any idea as to what this could be? Thanks in advance for all and any help!

    It's actually a feature film I've been working on for quite a while – most likely several CC versions back, maybe even from CS6 – sorry I can't remember off the top of my head. Could that be what's causing it? Is there any fix? Or do projects that have been upgraded several time throughout CC update history always have this issue?
    Thanks in advance for your help!

  • Audio tracks hissing when record enable is engaged

    Hi guys. I am having a big problem with hissing when record enable is engaged. I've discovered that when I click off software monitoring the hiss goes. But then I cant add effects like reverb for singers who want to record with reverb whilst they're recording. It shouldn't be the case, but any enlightenment and I would be grateful. Thanks.

    There are some issues with Audio Hijack app. After updated it, some problems related with Audio System Preferences have gone.
    Kuso

  • No audio tracks when sending from Final Cut?

    Hi,
    I'm working with a 90 minute edited sequence in final cut that I've nested in another sequence to create a continuous video with a stereo audio track. When I send it to soundtrack (multitrack project) for mixing, the video is there but the audio tracks are blank.
    Does any one know why this is happening or have suggestions as to what I might do differently?
    Thanks in advance.

    I ended up exporting the sequence inside my nested sequence and that worked as it should.
    But all of my audio tracks were given their own track in Soundtrack which wasn't what I wanted. Finally I exported my nested sequence "for soundtrack" and applied the effects and filters to the resulting file's audio tracks and saved it. I then imported the file back into FCP, put it in a sequence and made any adjustments that I needed before exporting it with compressor.
    I don't know if this applies to what you need to do but I hope it's helpful.
    Trevor

  • My CS6 close when i touch every audio track

    When i move the sound track, or I Import an effect and drop it in the audio track, or when I apply an effect to an original sound or when I equeallize it, premire shows an error and force me to restart the program.

    More information needed for someone to help... please click these links and provide the requested information
    -Information FAQ http://forums.adobe.com/message/4200840
    -Effective questions http://forums.adobe.com/thread/416679
    -How to get help quickly http://forums.adobe.com/thread/419406
    What are you editing, and does your project match your video?
    Please NOTE that the PPro CS6 screen may look a bit different (I use CS5)
    For CS5 and later, the easy way to insure that your video and your project match
    See 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666
    -and a FAQ on sequence setting http://forums.adobe.com/message/3804341
    When your project sequence is correct, you will not see a red line over your timeline at first import, before you do anything to the video
    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
    Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30
    For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
    For Mac http://mediainspector.massanti.com/

  • How do I add/import multiple audio tracks when adding a video to the Elements timeline?

    I have 2 audio tracks that have been made, but only 1 is being brought in. ( It is a .Ts video file that is from Hauppauge Capture and it has game play audio and commentary audio that is being over-layed.) They are written as separate audio tracks but when imported into Premier only 1 of the 2 are being brought in. Is there a way to bring in both files?

    pinhead276
    It is my recollection that we had a similar question a little while ago on this question. I do not recall the outcome. My first impression "it is what it is", but I am trying to dust off my memory to make sure that the user did not come up with a unique way to workaround the situation. I will start searching for the thread that I think that I remember.
    If you find the thread first, please post and let us know.
    More later.
    ATR

  • Naming audio tracks when recording??

    Is there a way of naming audio tracks so when you record them the actual name of the track exists in the audio folder??
    When you record in an audio track in logic for the first time, it prompts you to name and select where the audio track will be saved. Now whatever tack I record I end up having the same name for ever track..

    I did wonder if I should edit my answer with more detail
    In the Set Audio Record Path box if you check "Use Audio Object Name For Filename" then the name of whichever track you have selected and and are recording to is used.

  • Unable to perform multi audio tracks mixing with Audio Mixer

    How do you get a simple multi track mix with the Premier Pro 1.5 Audio Mixer?
    I got 2 audio clips, each sitting at the start of its own separate track (Audio 1 and Audio 2). I just want to mix them into the Master track.  Simple enough.
    So I go to the Audio Mixer. Position the CTI at the start of the tracks and hit the red RECORD button. The red spot starts blinking. Then I hit the START/STOP button expecting the tracks to start mixing into the Master track. Instead, I get this error message
         "PLAYER ERROR: You cannot record without enabling at least one track for recording."  
    I get the same problem if I try the mix onto a submix track.
    What am I missing? I combed through the Premiere Pro User Guide and J. Rosenberg's Premiere Pro Studio Techniques but to no avail.
    Thanks for any help.
    JB.

    Jacques, I havn't seen 1.5 for a while, so I need to stress that what I'm about to say is more of an educated guess linked to a rough memory.
    Each audio track in the mixer has a small chip (tickbox in 1.5??) that you click in order to enable that track for recording. In CS3 it's a little microphone.
    Having said that, I DON'T think that's going to give you what you want, as the intention of the recording functionality in PP is to record audio FROM AN EXTERNAL SOURCE (like a microphone) straight to an audio track, say, when doing a Voice Over for some video.
    You can't "mix down" to the master, as the master is not a track per se. It's just a "final" level control. The master will always be the sum of the active tracks, and THAT'S what will be rendered in the final output.
    You can still "live mix" your audio with the faders, it's just that those movements get recorded as keyframes on each of the tracks you modify (including, BTW, the Master).
    The advantage to this workflow is that every fader move you make is infinitley editable... a small error when riding the faders can easily be fixed by dragging keyframes.
    HTH.
    Matthew

  • Audio Tracks can be Heard but not Seen

    I am using Logic Studio 9 and in Logic Pro all the sudden I have had a problem with my audio tracks. When I record the tracks I can see the track audio waves being cut but once I hit stop the track visual go to a straight line with no feature. If I back up the play head and press play I can hear the audio of the track, but not see it. I can even bounce the track and use it in iTunes or WaveBurner, but still I cannot see the track visual info. This just recently started. ANY ANSWERS to this mystery would be greatly appreciated.
    Thanks

    http://discussions.apple.com/thread.jspa?threadID=2371889&tstart=0

  • Invisible audio tracks in timeline

    I've been working on a music video, so I've got multiple video clips in my timeline, but I've unlinked them from their original audio files and subsequently deleted the audio tracks they were assigned to. The only audio track I've kept is the original mp3 I am using. This was inserted on the audio track named "Soundtrack". For some reason, this track is no longer visible on my timeline. My Video tracks 1-7 are visible, but no audio tracks whatsoever. I can hear it fine and adjust it in the audio mixer, but I can't see it. Any idea how to get it back?
    NB: When I create a new sequence or project, the audio tracks are visible as usual. Just not in the sequence I'm working on. Also, if I add a new video clip with audio attached, I can preview the video and hear the audio, but again- the audio track isn't visible on the timeline. Please help! This is highly annoying...

    Are you using PrElements? PrPro does not have a "Soundtrack," but PrE does.
    My guess is that you need to scroll up/down in your Timeline, and you will find the phantom Audio Clip(s).
    Also, here is the Premiere Elements Forum. Maybe the MODs will move this post to that forum, if you ARE on PrE.
    Last, some users of PrE have had problems with both Soundtrack and Narration, the two fixed Audio Tracks. When this happens, I recommend that those Clips get moved to a free, regular Audio Track.
    Well, one more: I always convert any MP3 files to PCM/WAV 48KHz 16-bit, before Import. Many MP3 files can cause issues. I use Adobe Audition, but the great, free utility, Audacity, can do this too.
    Good luck,
    Hunt
    [Edit] The word "Sequence" indicates PrPro, and NOT PrE, so I was wrong about the program. In either program, look for the scroll bars to the far right of the Timeline Panel, and just scroll.
    To control the placement of Audio Assets, one thing to think about is that your source footage will determine which Audio Tracks will be available. The channel-count MUST match. A 1-channel source can ONLY go onto a 1-channel Audio Track. If you have Audio, that you do not want disturbed, just Lock that Track (note: ONLY in PrPro, as PrE does not have Track Locks).
    Message was edited by: Bill Hunt - Added Edit

  • Audio tracks stopped working

    i tried to solo an audio track and when i unclicked the S button a red line crossed through it and suddenly several other audio tracks stopped working. anyone?

    restarted everything and it fixed itself. yay.

Maybe you are looking for

  • Error in starting weblogic console

    I am getting this error when I am trying to enter this URL: http://localhost:7501/console/index.jsp I am trying to create a sample portal using weblogic portal server 4.0/weblogic server 6.0(sp1) Any help is appreciated. Thanks. Error 500--Internal S

  • Acrobat Reader 11 only prints the first page of a multipage document.

    When printing a commercially created document with printing permissions enabled, only the first page prints when printing all or a selected range of pages on HP LaserJet 4000 and 8000 printers.  Access is denied is displayed on ocassion.

  • How to replace one char with two chars in email address policy?

    I very much like to replace the 'ß' char in the surname with 'sz'. However, applying filter '%rßsz%[email protected]' on 'Preußig' leaves me with '[email protected]'. So, how do I replace one char with two chars in email address policy?

  • Groupwise 2012 SP2 and Office 2010 integration

    I have recently virtualized Groupwise 2012 and all seems to work well, Messenger launches on startup and it integrates with other applications etc but the only problem I have is when I open an Office 2010 document I get the following message popping

  • How to get rid of all the extra blank cells in excel export

    Hi I am using vs2005 and when the user exports a report to excel there are many extra blank cells and rows, just wondering if there is a way to get rid of these, thanks.