Wav file attachements

My home VOIP system notifies me with an email that voice mail has been received and attaches the voice mail message as a wav attachment. Is there any way of listening to these wav attachemnts on my iPhone? Thanks

At this time playing WAV files from attachments is not possible. You may want to Submit feedback on this and put in a request for it to be a added feature.
http://www.apple.com/feedback/iphone.html
Customers feedback influences changes the most.

Similar Messages

  • IPhone email WAV file attachment

    Hello. My company uses a system for voicemail, that will send an email to me with an attached WAV file with the voicemail in it.
    When I check the email and then select the WAV file attachment to play, it pops up with an error that says "this movie could not be played".
    I have researched this and noticed that the WAV file that is sent as an attachment is ecoded with "ACM Waveform". The only WAV file encoding that I found works on the iPhone is "PCM Windows".
    Is there any way to be able to listen to the ACM WAV file? Anyone know of a fix?
    WAV files encoded with ACM, ADPCM and PCM all play fine in iTunes. WAV files encoded with DVI do not however. Yet only the PCM encoded file will play on the iPhone.
    Any suggestions?

    Sure you can. I can send myself emails with WAV files and they open fine using the media player on the iPhone, provided they are encoded with Windows PCM. Anything else does not work.
    That is my issue. The WAV files that my system sends me are encoded with ACM. I need them to be PCM.

  • E66 .wav file attachment download

    On the E51 and E65 when an email attachment that is a .wav file was downloaded, the phone would allow playback immediately without saving or any other action. On the E66 as with the N95 the file comes up with the attachment but will not allow it to be immediately played. The only way that I have been able to figure out playing the attachemtn is to save it to the phone internally in "sound clips". I must then go to sound clips and play the file from there after downloading and saving. There must be a better wa to do this. Any help would be appreciated.

    Hi Trung,
    Try disabling plug-ins in Chrome and see if it works, if works you can pin-point out the exact plug-in causing the issue.
    Type this in the chrome browser's address bar: 
    about:plugins
    Reference:
    Chrome: Attachments save as attachment.ashx and a number
    Regards,
    Satyajit
    Please “Vote As Helpful”
    if you find my contribution useful or “Mark As Answer” if it does answer your question. That will encourage me - and others - to take time out to help you.

  • Unable to open a .wav file attached to email.

    When I click on an attached .wav file in an email it launches a player of some sort, appears to load the file, then displays the error "There was an error playing the file."
    According to the tech. specs, .wav files are supposed to be compatible.
    Anyone have any ideas? 
    Post relates to: Pre p100eww (Sprint)

    I was able to play a WAV sent to me via email. I have Vonage and it sends voicemails to my email as WAV files; these files work fine for me.

  • Cannot play .wav files attached to email

    I see on page 50 of the iPhone manual that .wav files are supported, however, they do not play. The error I get is "this movie format not supported". Does anyone have an answer that will help me?
    Thanks!

    did you find a resolution for this? I have the same issue on my business wav email accounts, but my home wav email account works fine.

  • How do you play a WAV file attached email

    How do you get a WAV file to play on the iPhone?

    Read https://discussions.apple.com/thread/1252769?start=0&tstart=0

  • Unity Connections - can I save my voicemail message locally as a .wav file?

    Is this possible and if so how?
    I am running Unity Connections v7 on a CMBE system.
    If I have IMAP setup, is the message attached, or is it a link?
    Thanks in advance,
    Steven

    Steven,
    Yes, this is most definitely possible. If you have IMAP set up then you are using "Integrated Messaging" and your email client is configured as an IMAP client with Unity Connection as the IMAP server. You may or may not be using the ViewMail plugin for your email client. If you are using ViewMail, the default behavior is that the media control used to play the voicemail message provides the option to "save as" a WAV file. If you don't have the ViewMail control loaded, then the file is simply seen as a WAV file attachment and will be played using a desktop media play that the user has selected to play files with the .WAV attachment.
    Check this link for some useful background:
    http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/administration/guide/7xcucsag210.html
    HTH.
    Regards,
    Bill

  • WAV Files on IPHONE

    I have a IPAD2 and a IPHONE 4S.
    I can listen to a WAV file attached to an email on my Ipad. But I can't listen to the same WAV file on my Iphone.  Is there a setting I have missed?

    You need to obtain and install a 3rd Party app from the iTunes App Store to enable listening to .WAV files on your iPhone.
    Hope this helps

  • Playing a .wav file from email attachment

    I am trying to play a .wav file that is attached to an email, and i get "The document conversion failed". Am I missing something? What do I need to do to be able to play .wav files that are sent to me via email?

    I have the same request.
    We have a new Panasonic phone system that sends out .wav voicemail files.
    Our company's Curve's play the wav fine.
    Our company's BOLDs ... DO NOT.

  • Pre does not play WAV file when received as an attachment via email

    I get my office voicemails emailed to me as an attachment but when I click on the attachment it goes to open the file to play but then it says that there was an error playing the file. Do i have to change a setting? Please help. Thank you!
    Post relates to: Pre p100eww (Sprint)

    I spoke to palm support they say they are aware of the problem at this time the pre doesn't support the wav file for voice mail . It is very important to me and I have been using this feature on my blackberry and my palm 755p I don't under stand why they would release a phone and not have the needed software for it .

  • Hi, I am getting an 'Error 4810 occurred at Sound File Read Open.vi' for the attached wav file (plus many other wav files). Any ideas?

    Hi,
    I am getting an 'Error 4810 occurred at Sound File Read Open.vi' for the attached wav file (plus many other wav files).
    Any ideas?

    No attachment exists.
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • Broadcast Wav files from PT to Logic not moving to original record position

    Okay, my system needs upgrading but I'm stable (at least I think I am til now!) I have a TV network sending me broadcast wav files from PT. They shoot their video on a 24 hour clock. I'm to be editing and mixing (in Logic) their audio tracks from PT and send them back as broadcast wav files for them to sync back to their video. After years and years of recording and producing music, this TV world is a first for me. 2 issues at hand that are causing trouble.
    NUMBER 1: The wav files will not snap to original record position. I keep getting an error message about "out of range" and of all craziness with a negative SMPTE number. ??? The prompt suggests an offset error. But there isn't I can find. Start time is set to 0:0:0.0.0 here and at the TV studio. They film at 29.97d. That matches as well. Sample Rate is correct at 48k 24bit. I've uncovered every thing I can think of. I did have to set the tempo down to 5 BPM in order to see a full 24 hours in SMPTE.
    NUMBER 2: I can't figure out how to see the timestamp start time of the audio files in the audio window. I have every option turned on in the VIEW option, I can see length, but I see nothing about start time of original record time. Am I missing something simple here? Seems like a very standard option that should be easily accessible. It would allow me to prepare the location on the time line.
    Overall, I'm hoping I can do all the above with my current rig but realize that the clock is ticking toward a whole new system with Logic 9.
    Help please. Don't want to lose this client.

    Sure do appreciate everyone's willingness to help. Setting SMPTE start to 24:00:00.0.0 didn't work either. I confirmed with the studio manager at the TV station also that they run a 24hour clock with 0 being midnight.
    I'm really hoping that the error is on their end.
    *It would help me if anyone knew how to VIEW the Timestamp info attached to the wav files. That would at least give me an approximate idea of where they should be.*
    I'm supposed to be editing and mixing the voice dialog from numerous different scene takes that were shot throughout a day of filming. It's critical that I can see all these different takes that were captured over hours of open recording. Some of the files are almost 4 hours long. It's a big project and I'm sure hoping I can stay inside Logic to get it all done with excellence.

  • How can I convert an array into a .wav file?

    I have an array of points that I need converted and written into a .wav file. Any help?

    Indeed there is!
    Look at the attached vi....that's about all there is to it!
    Good Luck..
    Eric
    Eric P. Nichols
    P.O. Box 56235
    North Pole, AK 99705
    Attachments:
    ARRAY_TO_WAVE.vi ‏17 KB

  • How can i create a .wav file from an array in v5.0?

    I am trying to output an aquired vibration trace as a .wav file.

    Hi Brian,
    no problem, see attached file.
    The file called "To Wav.vi"
    Hope it help you.
    Mike
    Brian wrote:
    > I am trying to output an aquired vibration trace as a .wav file.
    Attachments:
    To_Wav_Folder.zip ‏53 KB

  • Emailed voicemails with .wav files no longer play

    My office has a VoIP system that I have set up so it sends me an email (Gmail not Outlook) with the voice mail message attached as a .wav file.  On Sunday my Droid Razr M stopped working and Verizon made me do a hard reset to restore factory settings.  Since then I can't open the voice mail messages.  When I try to play the message I get this error message: "Info  No app can open this attachment for viewing."
    What got reset/removed during the factory reset and how can I restore the ability to play voice mails?

    its the updates to google play music causing the problem
    go to settings > apps > all and remove updates to google play music and it will start working

Maybe you are looking for