Wave Burner.Bouncing WB files.

I mastered a project of 10 songs on Wave Burner using plug ins on WB.I figured out to get all the songs onto a CD burn.However I would like to get all the 10 songs that have been mastered,directly onto my hard drive,withou haveing to rip it from the Cd I burnt.Please tell me how to go about to get this.ie WB mix to hard drive in wav format to email others.

Bounce Project?
Regards

Similar Messages

Masterd files back into wave burner

Hi everyone.
Im currently getting my projects mastered abroad; usually when I master locally the mastering engineer can embed the my ISRC codes and information on a CD ready for duplication. However I dont think I can get a CD sent to me, it would just be the mastered WAV file.
Can I take the mastered WAV file back into wave burner to insert the relevant information and codes and export it back out without effecting the file?

That doesn't sound like a problem to me as long as you don't add any plug-ins, normalize, or make any volume level changes. If the mastered files come back as individual tracks, you will have to deal with timing gaps between tracks. If they come back as a single file, you will need to insert track markers.
Out of curiosity, where do you have them mastered? Are you getting good results?

Wave Burner

I am trying to import songs that have seperate left and right wave files. I can't seem to get them to line up. It seems that Wave Burner wants to treat the left as if it were a stereo file and the right as if it were a stereo file.

If you are only using logic and wave burner I think you can keep bounces as interleaved files. Go back to source sessions and bounce files as stereo interleaved.
You should have no troulbe in waveburner after that.
Cheers
Darrell, Ottawa

Wave burner mp3

I am sending a mp3 track via email and I have bounced it down from logic pro as mp3
I then import it into wave burner which automatically converts it into an audio file for mastering.
How does one bounce this file back to an MP3 file in order to reduce the size from approx 37 m/bits to about 4.3 m/bits as an mp3 file.
There does not seem to be an export window,or function to enable it to be converted back to an mp3 file.
Any answers
Thanks
Trafford Reeder

I realize that this is slightly off topic from your initial post, but you've said something that raises a concern: you mention that you bounce files into mp3 format from Logic, import them into Waveburner (which converts them to AIFF), and then intend to bounce them again into mp3 format. This process would be a bad idea, since you would be running the mp3 compression algorithm twice, reducing the quality of the audio considerably. When any program imports an mp3 file and rerenders it as AIFF or WAV, it is not a true lossless file, but rather a lossless representation of a lossy file. Or, in otherwords, it is just a high-fidelity copy of a lower-fidelity audio file. You really ought to bounce AIFF files from Logic, do whatever mastering you intend to do, and then convert the bounced file into mp3. I realize this seems to be several steps, but it is necessary to avoid losing quality.
I would like it very much, however, if Waveburner could render mp3 albums (and especially simultaneously export CD images and mp3s, much as Logic can do AIFFs and mp3s at the same time). Hopefully the developers find a way to do this.
-Mike

Problem with Wave Burner

Hi
I'm having a problem with Wave Burner hanging when I try to play audio files. The last time I used it, several months ago, all was well but now after importing my audio files and pressing play the program hangs up and can only be closed with force quit. This also happens opening saved files which played previously. Logic and Pro-tools are still working fine. No problems there.
Im using a digi003 with Core Audio. Logic 8.02 OS version 10.5.8. I mac 2.66 dual.
Any help would be appreciated. Thanks!!

I thought I'd try this again
In Wave Burner if I select the internal audio as playback it works. It's only when I select the Digi003 as playback that it hangs. It used to playback through the 003 fine.
Anyone?
Thanks!

Exporting AIFF or WAV - Burn CD - Import as MP3

Hello!
I have a strange problem ... first off, I am a Mac Newbie. I have used PC software to record, export, burn, extract music files for some time now without a problem like this.
Recently I acquired a mac and I'm now using Garage Band to record my CDs. I sell professional CDs online and so they need to be able to function perfectly.
The problem I am now encountering is that I will export and burn a perfect CD. It sounds great when I import it back into itunes on another computer, whether that import is an mp3, a wav, or any kind. It sounds fine on that computer.
But when I take that same .mp3 or .aac file or apple lossless, and sync it into my iphone, it sounds horrible. When I say horrible I mean, you can hear the music ok, but my voice is barely audible and all garbled sounding.
However, I can take other CDs I have made from my PC, import those, and the mp3 versions on my iphone sound perfect.
Since I sell these CDs, in the event someone sticks the CD in their computer and decides that they want to import the CD as an MP3, I don't want them to have to mess around with it to make it play properly.
So, the problem needs to be rectified at the level of exporting or burning or even something before that I am not aware of.
Again, I am new to Mac. I am actually using itunes to burn the CD. Could that be the problem? Maybe there is a better software to make a better CD that will import properly?
Thanks for your help!

Well, I believe I have resolved my own problem. It's kinda silly. I think in my old software on my pc, I had it already configured to default to record the tracks in mono. Something I guess I had long forgotten about. So, changing the tracks to mono definitely has fixed the issue here. I KNEW it had something to do with what I was doing wrong in my recording software, and not an itunes or iphone problem as apple was trying to get me to believe.

Bouncing a file for mastering...

What is the correct way to export a final mix out of Logic to be reimported into a new Logic file for a final master?

There is a Mastering template when you boot up Logic- I haven't used it but it's there. You can also do it the way you have suggested, and you can also use Wave Burner I would imagine. Also there are popular programs like Bias Peak.
There is a book by Bob Katz (http://books.google.com/books?id=EBCmpwGCROMC&dq=BobKatz&hl=en&prev=http://www.google.com/search?hl=en&rlz=&q=bob+katz&btnG=GoogleSearch&sa=X&oi=print&ct=result&cd=2&cad=author-navigational) that is a good read and very informative.\
When one masters, you take the final mix and apply careful final EQ and some compression, depending on the needs of a song, and make sure that all the levels are the same for the whole package (CD or whatever). Maybe you already know this, I'm just throwing it out there- and I don't know squat else except what I have told you, so I'm on my way now.

How do I burn a .mov file to DVD?

I need to burn an MPEG-2 video file saved as .mov to a DVD that will play in a regular DVD player.
I have tried opening iDVD and the selecting 'Create a New Project'. When I have selected a location for the project and the main window opens, I go to File > OneStep DVD from Movie...
My understanding is that when I import a movie file, it will burn it straight to the disc without any further options. It does this, however after a couple of minutes the DVD is ejected blank and iDVD says the burn has completed.
How can I solve this problem or is there another way to burn a .mov file to DVD?
Thanks, Dan

A green screen in an indication that the movie is in a format not supported by iDVD. It should be in one of these formats: DV, high-definition video (HDV), MPEG-2 SD, MPEG-2 SD, MPEG-4 SD, MPEG-4 HD, and AVCHD. (From SDMacUser's post in What input file formats does iDVD...: Apple Support Communities). The post has other requirements that need to be met.
SD = standard definition.
Open your movie with QT Player and bring up the Info window for the movie. It will have the format:
Another possible reason is the Energy Saving settings on the Mac. Turn off energy saving and screen saver before starting the save as disk image or burn.
Other possible fixes can be found in this tipic: Green Screen with audio after Burning: Apple Support Communities

Bounced MP3 file do not play in iTunes

Hi guys!
I'm a new Logic Express 9 user (and a complete novice in recording!). I just managed to connect my Roland RD-700SX piano to my Macbook Pro (USB connection). I managed to use Logic Express 9 to record a simple song that I played on the piano. If I understand it correctly, the flow of data and subsequent "creation" of sound is as follows:
- upon recording: piano keyboard (acting as controller) --> Logic Express (receiving MIDI-data from keyboard) --> sound generator inside the piano (receiving MIDI-data from Logic Express) --> speakers
- upon playback: Logic Express (sending the recorded MIDI data) --> sound generator inside the piano (receiving recorded MIDI-data from Logic Express) --> speakers
I then bounced the file to an MP3 (following the directions in the "Exploring Logic Express 9" manual).
Upon playing the MP3 file in iTunes, there is no sound. I can see that the file was compressed (the MP3 file is about a quarter of the original uncompressed file).
Why is there no sound after bouncing the file? Does it have something to do with the fact that the "playback" within Logic Express 9 is sending the MIDI data to the piano's sound generator, and therefore does not actually hold the "audio" data, but a mere projection of that data? If the latter, how can I record the "audio" that I hear when playing the recording in Logic Express? If not possible to record the exact same audio (which is based on a top-range grand piano pre-installed in the RD-700SX), is there a way to use the MIDI-data in the project file and record "audio" based on the instruments that came with Logic Express?
Thanks!

Hi man,
my sympathy for RD700sx users is unbroken
You gave the answer yourself: "Why is there no sound after bouncing the file? Does it have something to do with the fact that the "playback" within Logic Express 9 is sending the MIDI data to the piano's sound generator, and therefore does not actually hold the "audio" data, but a mere projection of that data?"
That's exactly what happens. You didn't record any audio in Logic, but only MIDI data streamed from and to your digital piano.
To have your song bounced, you must record the RD700SX' sounds into an audio track. To do this, it is not sufficient to connect the keyboard via USB, because it hasn't got an integrated audio interface.
Instead, go get yourself an audio interface (or, in case of missing funds, connect it with a suitable adapter cable directly to you Mac's inputs, you'll want to use the headphone jack of the RD700 as output perhaps). Then, aim a audio track for recording and hit record. The Mac will stream the MIDI data to your RD700, which in return will feed the audio track with audio (resulting in a visible waveform). Now this can be bounced.
Alternatively, you can use the MIDI data you've recorded to feed software instrument tracks which will produce audio as well.
Fox

Burning exported quicktime file to cd

Newbie here. After exporting different short (less than 3 minutes) files to quicktime (using a variety of settings) my quicktime file plays fine on my computer. I have even uploaded these files to Youtube with no problem.
The problem is burning the quicktime file to a cd. I've tried different write speeds, but the file hangs or is so choppy it is not watchable. I am not able to view the quicktime file on my computer or any other.
My computer is new (less than a month) so i tried burning a quicktime file exported from iMovie. That file plays fine. I wasn't sure if the problem was my cd drive.
Is there something simple i am missing? I've read many parts of the manual and looked thru this forum and am not finding a solution.

I was using a cd as the file was so small (ranging from 6mb to 600 mb - i've tried 2 dif files and converted them to quicktime multiple ways).
I did use the "quicktime movie" option to export, (along with the conversion. The conversion options had more settings i could control for Youtube use which was suggested on another site.http://www.kenstone.net/fcphomepage/you_tube_reduxgary.html) The sole purpose is to upload to Youtube. I'm burning to a cd as i am just giving the file to the person i made the movie for so they can keep it and upload to Youtube. I have not tried putting the quicktime file onto a dvd, but didn't think that was not needed for a 10mb quicktime movie. I did make the movie self-contained, but it won't play on my computer either.

HT204266 is wave burner included with the download of Logic Studio from the app store?

is wave burner included with the download of Logic Studio from the app store?

Hi HandletheTruth.
I will be able to assist you.
The MF Toolbox 4.9 software supports scanning in the document using OCR processing; however, you will need a separate OCR software that will allow you to edit the software.
I hope this information is helpful to you. Should you need further assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Can't Burn a .img file

iDVD file plays fine on Mac. File is a video transferred from VHS to iMovie, then made into iDVD file, with added scrolling block comments and one picture. The burn process completes the "Processing" step, but gives a message and hangs up without burning the .img file. The message is: "The selected folder contains no pictures. To see a slide show screen saver, add pictures to your picture folder, or choose a new folder that contains pictures in desktop and Screen Saver preferences".
What's this?
Stuart

Dumb Question!

I realize that wave burner is no longer part of Logic. Does anyone know of a viable option? thanks.

I realize that wave burner is no longer part of Logic. Does anyone know of a viable option? thanks.

I realize that wave burner is no longer part of Logic. Does anyone know of a viable option? thanks.

How to find and install Wave Burner?

Hi, recently i bought Logic 9 from App Store and I don't have Wave Burner as it was normally with previous versions.
How can I obtain it?
Regards

Hi
DJ Blendmaster RIP wrote:
I wish to use the Soundtrack more for editing purposes during work with Logic
It had good options such as noise reduction, which in logic do not work properly (silencer). And there were other good options such as spectrum View edits.
So when I have new system like mountain Lion and I downloaded Logic 9 from app strore, am I automatically deprived of using programs which I got with boxed Logic 8?
and
The Art Of Sound wrote:
The version of Soundtrack Pro on the Logic 8 DVDs is not compatible with Lion or Mountain Lion and therefore cannot be installed/run
Actually, it IS possible to install STP2 from the original Logic Studio (Logic 8) installer (using Pacifist), and it does seem to run OK in Mountain Lion (though I have not done much with it since I have STP3):
Waveburner 1.5.2 and 1.6.1 also run.
That said, there were/are a couple of *really nasty* bugs in STP 2, particularly regarding the Noise Print/Noise removal process. STP 3 is much much better.
Perhaps the OP can track down a Logic Studio 2 boxed set, and gain the benefit of STP 3?
CCT

Burn a PDF file onto a CD that contains music

Hello, I'm currently in the process of completing a physical version of some music I made. I also want to include the lyric booklet PDF file but I would like to keep the CD as a music CD so there won't be any compatibility problems. Is there any way to burn the PDF file onto the CD with the music without sacrificing playability? An album that I know has done this is Fall Out Boy's "Folie a Deux". They put some files onto the CD that would allow you to download additional content. Thank you for any help!

I know you can to this with Toast, Roxio Toast 11 Titanium - CD, DVD, Blu-Ray Burning Software Program for Mac I've done it before. Toast calls this an "enhanced audio CD". I don't know if you can do this with iTunes or Disc Utility, but probably not.

Wave Burner.Bouncing WB files.

Similar Messages

Maybe you are looking for