Wave forms won't display in timeline

Hello:
I just upgraded to FCP version 5.1 from version 4.5 on my G4 powerbook. The audio plays fine, but for some reason I can't get the waveforms to show up in the timeline. All I see are the red lines and the small "x" symbols on each audio clip. When openning individual audio clips in the viewer the waveforms do not show up there either. I made sure that the "Show audio waveforms" box was checked on the timeline options tab. Could it be a ram issue? I only have 1 gb installed. Any sugggestions would be greatly appreciated. Thanks.
--jaypee100

I've seen a certain waveform lag on projects, before. You get the X's, and you have to sit at one space in your time line to get the waveforms to update. If you're scrolling a lot, they might appear to not be displaying at all.
Could certainly be a memory issue. Could also be an issue with your audio's codec. I would image an mp3 would take a little longer than an aiff to update, because of the compression.

Similar Messages

  • Can I get the audio wave form to show in the Timeline?

    Can I get the audio wave form to show in the Timeline?
    Thanks / Christer

    Yes Christer.
    At the bottom left corner , under the audio timelines you will see a tiny black triangle.
    Click it and from the contextual menu that appears select "Show Audio Waveforms".
    Ian.

  • Contact Form won't display input text

    Hi,
    I'm trying to create a flash contact form that sends the
    user's message on enter key. Therefore I need you to help me do
    this and also help me understand why my form isn't displaying right
    when I have a mask for it.
    To get a better picture of the problem
    here you can
    see how the form should look like and
    here you can
    see the same form, but with the mask

    I'm not sure I understand what you mean by "embed the fonts
    in each of the text fields"
    Please have a look at the .fla file:
    http://www.claudiudesign.org/test/sterg.fla
    (this fla has the mask; if you remove it you will be able to
    see the working contact form)
    It won't take you more than 1 min to understand what's up
    with it if your good at this.
    Thing is I'm behind the schedule with this and I have to
    solve the problem as soon as possible.
    Thank You

  • IRS forms won't display on screen; this just started.

    Recently, IRS forms will not display on my screen. I have a Mac and it used to display these forms on the screen. Could the problem be caused by a recent version of Firefox Mozilla.
    == URL of affected sites ==
    http://

    Check to see if your Adobe Acrobat & Reader Plug-in is current; IRS forms use Adobe Reader/Acrobat for their forms. Also see if your Java and Shockwave Flash (aka Adobe Flash) are current.
    Check your plugins here: http://www.mozilla.com/en-US/plugincheck/
    See the following for instructions for updating your plugins if they are not current:
    http://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox
    http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox
    http://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin

  • The memo field in forms won't display text?

    I am using Firefox 33.1.1 on a WindowsXP Pro system and have been using FireFox for quite some time . . .
    Recently, I must have done something, I just don't know, but I can't seem to remedy the problem.
    I create and use a lot of forms. Standard <form></form> HTML forms.
    Whenever I pull up a form, I can no longer see any text as I type into the MEMO field. I also don't see any contents of the MEMO field when I recall a record fromn the database within the form.
    This is happening ONLY with the MEMO field.
    This very message I had to type in notepad and copy and paste it into this bug report form.( OMG - when I pasted this text into this form, I can see the text!! But still not in other forms)
    YET, the text is indeed in the form. This text will display when recalling a record to the webpage and displaying the memo field contents on the page.(Not in form)
    I have done all I can according to FireFox problem resolution suggestions including uninstalling and reinstalling a fresh pristeen copy of Firefox to a diff location on HD.
    I do NOT have this problem when I go into Windows IE. I know there is no problem with the form itself or database contents. This happens on ANY memo field at ANY website, not just mine.
    I cannot say if this began after an FF update or not. I feel it may be a simple fix. I may have hit a key or combination of keys that changed a setting causing this, but I dont know where.
    Any clues would be helpful.
    thanks
    jim

    Try to disable OMTC and leave hardware acceleration in Firefox enabled.
    *<b>about:config</b> page: layers.offmainthreadcomposition.enabled = false
    *http://kb.mozillazine.org/about:config
    You can try to disable hardware acceleration in Firefox.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    You need to close and restart Firefox after toggling this setting.
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    *https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration
    This can be a problem with the font that is used to display the text.
    You can do a font test to see if you can identify corrupted font(s).
    *http://browserspy.dk/fonts-flash.php?detail=1
    You can try different default fonts and temporarily disable website fonts to test the selected default font.
    *Tools > Options > Content : Fonts & Colors > Advanced
    *[ ] "Allow pages to choose their own fonts, instead of my selections above"

  • Customer registration form won't display in testing environment.

    Hi everyone,
    I am using DWCS3 with the free version of MAMP.
    I have put a customer registration form together and have just started to add the php $mailSent code.
    In design view everything seems to be o.k the three gold shields are displayed at the top of my page.
    However when I try to view the page in my local testing environment, the page doesn't display at all I just get a white screen. I was also getting an error message suggesting my site url's weren't mapped properly, or, my server wasn't serving pages with a .php extension.
    I checked my datetest page and that is displaying today's date, I also checked my phpinfo page and that is also displaying.
    I also checked that my site url's are mapped properly, I would say they are because my other site pages e.g. index page, links page, about page ect are opening up in my testing browser.
    I have added my code for anyone to take a look at;
    the 1st block of code I added at the top of the document before the <!DOCTYPE> (suggested in The Essential Guide to Dreamweaver CS3)
    the 2nd block of code is added just after the page's main heading.
    the 3rd line of code is added to the form action in the opening form tag.
    Could someone please help, as I am stumped.
    Thankyou.
    <?php
    if (array_key_exists('send', $_POST)) {
    //mail processing script
    $to = '[email protected]';
    $subject = 'Customer Registration from HLPhotography';
    //process the $_POST variables
    $name = $_POST['name'];
    $email = $_POST['email'];
    $postcode = $_POST['postcode'];
    //build the message
    $message = "Name: $name\n\n";
    $message .= "Email: $email\n\n";
    $message .= "Postcode: $postcode";
    //limit line length to 70 characters
    $message = wordwrap($message, 70);
    //send it
    $mailSent = mail($to, $subject, $message);
    ?>
       <?php
    if ($_POST && !$mailSent) {
    ?>
        <p class="warning">Sorry there was a problem sending your message, please try later.</p>
        <?php
    elseif ($_POST && $mailSent) {
    ?>
        <p><strong>Your message has been sent thankyou for registering your details.
        </strong></p>
        <?php } ?>
    <form id="formcusrg" name="formcusrg" method="post" action="<?php echo $_SERVER['PHP_SELF']; ?">

    Sorry, I can't help with your question, I'm not a php guru  :-)   but you may want to edit out that email address if it's a live one - it will get hit by the bots if left here too long !
    Nadia
    Adobe® Community Expert : Dreamweaver
    Unique CSS Templates |Tutorials |SEO Articles
    http://www.DreamweaverResources.com
    http://csstemplates.com.au/
    http://twitter.com/nadiap

  • 9i Form won't display

    Hi,
    I have a simple form that I created in the 9i developer suite. After I start OC4J, I click on the runform button in forms developer to run the form, all I get in the end is a blank screen with an "applet started" message in the console of the browser. I have an old 6i form that runs just fine but can't seem to find the problem with the new 9i form. Anyone have any ideas on where to start looking for the source of this problem?
    Thanks in advance.
    Jeff

    Boris,
    Thanks for your response. Unfortunatly, that is not the problem as there are no spaces in the form's name. I will clarify that the blank screen I am getting is really a dark blank screen within the browser, with the approximate dimensions of and positioned where my form ought to be. In other words-- I get a big dark grey square in the middle of my browser when I run the form. Also, I'm not getting any error messages which is making this difficult to diagnose.

  • OS X - Audio Wave Form Disappears

    OS X 10.10.2
    Premiere v. 2014.2
    In every project I start I notice that the audio wave form that displays in the timeline, after Premiere conforms the audio, disappears depending on where I have the scroll bar in the timeline. This only happens when I create a multicam clip with two or more cams. I can also pin-point when it happens. If I scroll to the end of the timeline that I placed the clip in as soon as the end of the clip enters the current timeline field of view the wave forms will disappear. I took a video to show exactly what happens.
    I understand that I am going to have to submit a bug report, but I want to know if 1) anyone else is experiencing this or can reproduce it and 2) if there is a way to fix it. Right now the only workaround for me is to Render and Replace the audio for every multicam clip I make. When I do that the wave forms seems to display correctly, but I would rather not have to do that every time I use a multicam clip.
    I figure if others experience this and we all submit a bug report the odds of it getting fixed will increase.

    I'm going to bump this. Is anyone else even experiencing this or able to reproduce it?

  • View audio wave form in A1 and A2 etc in the timeline instead of the Viewer

    It's likely this is an amateur question buuut -
    Is there anyway to get the audio wave form to show in the Audio layers in the timeline. The only way I've seen to adjust and play with audio is when I double click on one of the tracks and then the audio tab in the viewer will open. I want to be able to see waveform in the timeline and then add or remove markers and adjust from the timeline -
    There's got to be some way to adjust audio and play and stop so that you can watch the video and hear audio changes as you tweak it at the same time.

    SEQUENCE--> SHOW AUDIO WAVEFORMS

  • Dreamweaver Form Won't Submit- Says Error page cannot be displayed

    My dreamweaver form won't submit because it says there is an error. Am I doing something wrong? I don't know much about forms and how they submit but I heard that in order for their to be a confirmation page I have to create a php page? Here's my code. Thanks!
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
    <title>Rental and Availability Information</title>
    <style type="text/css">
    <!--
    @import url("CSS Styles/ThankYou.css");
    .style18 {font-size: 16px; font-weight: bold; }
    .style21 {color: #FFFFFF}
    .style42 {
    font-size: 16px;
    color: #000000;
    font-family: Garamond;
    a:link {
    color: #000000;
    .style43 {
    font-family: Garamond;
    color: #FFFFFF;
    font-weight: bold;
    .style44 {
    font-family: Georgia, "Times New Roman", Times, serif;
    font-size: large;
    -->
    </style>
    <link href="CSS Styles/ActivBorder.css" rel="stylesheet" type="text/css" />
    <link href="CSS Styles/border.css" rel="stylesheet" type="text/css" />
    <style type="text/css">
    <!--
    .style50 {
    font-family: "Goudy Old Style";
    font-weight: bold;
    font-size: 24px;
    color: #FFFFFF;
    .style57 {font-family: Verdana, Arial, Helvetica, sans-serif}
    .style58 {font-family: Verdana, Arial, Helvetica, sans-serif; font-size: 14px; }
    -->
    </style>
    </head>
    <body>
    <form id="form2" name="form2" method="post" action="inquiryreceipt.html">
      <table width="556" border="0" align="center" cellspacing="0" bgcolor="#003366" class="ImageBorder">
        <tr>
          <td colspan="3" valign="top"><div align="center" class="style50"><u>Rental and Availability Information</u></div></td>
        </tr>
        <tr>
          <td width="189"><div align="right" class="style18 style57"><span class="style21">Name:</span></div></td>
          <td colspan="2"><input name="name" type="text" id="name" size="50" maxlength="100" /></td>
        </tr>
        <tr>
          <td><div align="right" class="style18 style57"><span class="style21">Property of Interest: </span></div></td>
          <td colspan="2"><label>
            <select name="property" size="1" id="property">
              <option>Butte Creek</option>
              <option>Casa De Ladrillo</option>
              <option>Collins Island</option>
              <option>The Crosby Estate</option>
              <option>Kailua Beach</option>
              <option>Keefer Ranch</option>
              <option>Koko Head</option>
              <option>Rancho Mirage</option>
              <option>San Diego Luxury High Rise</option>
              <option>Santiago Canyon</option>
              <option>South Lake Tahoe</option>
            </select>
          </label></td>
        </tr>
        <tr>
          <td><div align="right" class="style18 style57"><span class="style21">Dates:</span></div></td>
          <td width="83" align="right" bgcolor="#003366"><div align="right" class="style58">
            <div align="right"><span class="style21">Arrival:</span></div>
          </div></td>
          <td width="270" align="left" bgcolor="#003366" class="FormBorder"><strong>
            <select name="smonth" id="smonth">
              <option>Month</option>
              <option value="January">January</option>
              <option value="February">February</option>
              <option value="March">March</option>
              <option value="April">April</option>
              <option value="May">May</option>
              <option value="June">June</option>
              <option value="July">July</option>
              <option value="August">August</option>
              <option value="Semptember">September</option>
              <option value="Octover">October</option>
              <option value="November">November</option>
              <option value="December">December</option>
            </select>
            <select name="select" id="select">
              <option>Day</option>
              <option value="1">1</option>
              <option value="2">2</option>
              <option value="3">3</option>
              <option value="4">4</option>
              <option value="5">5</option>
              <option value="6">6</option>
              <option value="7">7</option>
              <option value="8">8</option>
              <option value="9">9</option>
              <option value="10">10</option>
              <option value="11">11</option>
              <option value="12">12</option>
              <option value="13">13</option>
              <option value="14">14</option>
              <option value="15">15</option>
              <option value="16">16</option>
              <option value="17">17</option>
              <option value="18">18</option>
              <option value="19">19</option>
              <option value="20">20</option>
              <option value="21">21</option>
              <option value="22">22</option>
              <option value="23">23</option>
              <option value="24">24</option>
              <option value="25">25</option>
              <option value="26">26</option>
              <option value="27">27</option>
              <option value="28">28</option>
              <option value="29">29</option>
              <option value="30">30</option>
              <option value="31">31</option>
            </select>
            <strong><strong>
            <select name="select2" id="select2">
              <option>Year</option>
              <option value="2002">2002</option>
              <option value="2003">2003</option>
              <option value="2004">2004</option>
              <option value="2005">2005</option>
              <option value="2006">2006</option>
              <option value="2007">2007</option>
              <option value="2003">2008</option>
            </select>
            </strong></strong>      </strong>       
          <div align="left"></div>      <div align="left"></div></td>
        </tr>
        <tr>
          <td><span class="style57"></span></td>
          <td bgcolor="#003366"><div align="right" class="style58">
            <div align="right"><span class="style21">Departure:</span></div>
          </div></td>
          <td align="left" valign="middle" bgcolor="#003366" class="FormBorder"><strong>
            <select name="smonth" id="smonth">
              <option>Month</option>
              <option value="January">January</option>
              <option value="February">February</option>
              <option value="March">March</option>
              <option value="April">April</option>
              <option value="May">May</option>
              <option value="June">June</option>
              <option value="July">July</option>
              <option value="August">August</option>
              <option value="Semptember">September</option>
              <option value="Octover">October</option>
              <option value="November">November</option>
              <option value="December">December</option>
            </select>
            <select name="sday" id="sday">
              <option>Day</option>
              <option value="1">1</option>
              <option value="2">2</option>
              <option value="3">3</option>
              <option value="4">4</option>
              <option value="5">5</option>
              <option value="6">6</option>
              <option value="7">7</option>
              <option value="8">8</option>
              <option value="9">9</option>
              <option value="10">10</option>
              <option value="11">11</option>
              <option value="12">12</option>
              <option value="13">13</option>
              <option value="14">14</option>
              <option value="15">15</option>
              <option value="16">16</option>
              <option value="17">17</option>
              <option value="18">18</option>
              <option value="19">19</option>
              <option value="20">20</option>
              <option value="21">21</option>
              <option value="22">22</option>
              <option value="23">23</option>
              <option value="24">24</option>
              <option value="25">25</option>
              <option value="26">26</option>
              <option value="27">27</option>
              <option value="28">28</option>
              <option value="29">29</option>
              <option value="30">30</option>
              <option value="31">31</option>
            </select>
            <strong> <strong><strong>
            <select name="syear" id="syear">
              <option>Year</option>
              <option value="2002">2002</option>
              <option value="2003">2003</option>
              <option value="2004">2004</option>
              <option value="2005">2005</option>
              <option value="2006">2006</option>
              <option value="2007">2007</option>
              <option value="2003">2008</option>
            </select>
            </strong></strong></strong>      </strong></td>
        </tr>
        <tr>
          <td><div align="right" class="style18 style57"><span class="style21">Email:</span></div></td>
          <td colspan="2"><input name="email" type="text" id="email" size="50" maxlength="50" /></td>
        </tr>
        <tr>
          <td><div align="right" class="style18 style57"><span class="style21">Phone: </span></div></td>
          <td colspan="2"><input name="phone" type="text" id="phone" size="30" maxlength="30" /></td>
        </tr>
        <tr>
          <td height="204" valign="top" bgcolor="#003366"><div align="right" class="style18 style57"><span class="style21">Additional Info: </span></div></td>
          <td colspan="2" bgcolor="#003366"><label>
            <textarea name="info" cols="40" rows="10" id="info"></textarea>
          </label></td>
        </tr>
        <tr bgcolor="#660000" class="FormBorder">
          <td height="33" valign="middle" bgcolor="#003366"><label for="Submit"></label>
              <label for="label3"></label></td>
          <td colspan="2" align="center" valign="middle" bgcolor="#003366"><div align="left">
              <input type="reset" name="Reset" value="Clear" id="Submit" />
              <input type="submit" name="Submit" value="Submit" id="label3" />
          </div></td>
        </tr>
        <tr bgcolor="#660000" class="FormBorder">
          <td height="33" valign="middle" bgcolor="#003366"><div align="left" class="style43"><span class="style29 style44"><strong>&laquo;</strong></span> <a href="Index.html" class="style60"><span class="style61 style21"><u>HOME</u></span></a></div></td>
          <td colspan="2" align="center" valign="middle" bgcolor="#003366"> </td>
        </tr>
      </table>
      <div align="center"><span class="style42">&copy;<strong><a href="Index.html">TheBestSpots.com</a>   Phone: (800) 761-9819 Fax: (949) 851-0450 <a href="mailto:[email protected]"><br />
      [email protected]</a></strong></span>  </div>
    </form>
    </body>
    </html>

    I believe my it guys have php on their server. When I look on the internet
    to try and use the form to test it, I get the error:
    The website cannot display the page
    HTTP 500
    Most likely causes:
    The website is under maintenance.
    The website has a programming error.
    What you can try:
    Refresh the page.
    Go back to the previous page.
    Here's one php code I have linked to one of my documents:
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
    <title>Untitled Document</title>
    <style type="text/css">
    <!--
    .ThankYou {
    background-attachment: fixed;
    background-repeat: no-repeat;
    background-position: center center;
    border: thick dotted #660033;
    font-family: "Times New Roman", Times, serif;
    font-size: 24px;
    font-weight: bold;
    color: #660033;
    font-style: italic;
    background-color: #FFFFFF;
    .style3 {
    font-size: 18px;
    font-style: italic;
    font-weight: bold;
    font-family: Georgia, "Times New Roman", Times, serif;
    color: #000066;
    .style4 {font-size: 30px}
    a:link {
    color: #000066;
    a:visited {
    color: #000000;
    a:hover {
    color: #000000;
    a:active {
    color: #000000;
    -->
    </style>
    </head>
    <body>
    <div align="center">
      <table width="780" height="150" border="1" class="ThankYou">
        <tr>
          <td valign="middle"><div align="center">
            <p class="style4">Thank You For Submitting Your Comments!</p>
            <p>-The Best Spots<br />
              Luxury Vacation Rentals</p>
          </div></td>
        </tr>
      </table>
      <p align="left"><img src="BOPIcon copy.gif" alt="BirdOfParadise" width="36" height="36" /><span class="style3"><a href="Index.html">TheBestSpots.com </a></span></p>
    </div>
    <p>
      <?php
    $txtToAddr = '[email protected]' ;
       $txtSubj = 'Guest Comment From '. $_POST['fname'] . ' ' .  $_POST['lname'] . ' email '. $_POST['email'] . ' Property' . $_POST['property'] ;
    $txtFromAddr = $_POST['email'];
    $txtBody = $startdate = $_POST['smonth']  .  $_POST['sday'] . $_POST['syear'] . ' ' . $enddate = $_POST['emonth'] . $_POST['eday'] . $_POST['eyear'] . ' ' . $_POST['comments'] ;
       $headers = 'From: '. $txtFromAddr . "\r\n" .
        'Reply-To: ' . $txtFromAddr . "\r\n" .
        'X-Mailer: PHP/' . phpversion();
        // echo " Thank you for you request. You will be contacted within 1 business day."; 
        mail( "$txtToAddr", "$txtSubj", "$txtBody", "$headers");
    ?>
    </p>
    <p> </p>
    <p>  </p>
    </body>
    </html>
    And here's the other php code I have linked to the other:
    <?php
    $FM_VERS = "8.05";      // script version
    /* ex:set ts=4 sw=4 et:
    * FormMail PHP script from Tectite.com.  This script requires PHP 4 or later.
    * Copyright (c) 2001-2008 Root Software and Open Concepts Pty Ltd
    * (ABN 93 003 733 499), Melbourne, Australia.
    * This script is free for all use as described in the "Copying and Use" and
    * "Warranty and Disclaimer" sections below.
    * Visit us at http://www.tectite.com/ for updates and more information.
    *** If you use Tectite FormMail, please support its development and other
    *** freeware products by putting the following link on your website:
    ***  Visit www.tectite.com for free <a href="http://www.tectite.com/">form processing script</a>.
    * Author: Russell Robinson, 2nd October 2001
    * Last Modified: RR 14:07 Wed 15 August 2007
    * QVCS Version: $Revision: 1.4 $
    * Read This First
    * ~~~~~~~~~~~~~~~
    *  This script is very well documented and quite large!  It looks daunting,
    *  but really isn't.
    *  If you have experience with PHP or other scripting languages,
    *  here's what you *need* to read:
    *      - Configuration (TARGET_EMAIL & DEF_ALERT)
    *      - Creating Forms
    *  That's it!  (Alternatively, just read the Quick Start and/or
    *  Quicker Start section below).
    *  Full configuration documentation is here:
    *      http://www.tectite.com/fmdoc/index.php
    * Purpose:
    * ~~~~~~~~
    *  To accept information from an HTML form via HTTP and mail it to recipients.
    * What does this PHP script do?
    * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    *  On your web site, you may have one or more HTML forms that accept
    *  information from people visiting your website.  Your aim is for your
    *  website to email that information to you and/or add it to a database.
    *  FormMail performs those functions.
    * Quick Start
    * ~~~~~~~~~~~
    *  1. Edit this file and set TARGET_EMAIL for your requirements (near
    *      line 235 in this file - replace "yourhost\.com" with your mail server's
    *      name).  We also strongly recommend you set DEF_ALERT (the next
    *      configuration below TARGET_EMAIL).
    *  2. Install this file as formmail.php (or other name ending in .php)
    *     on your web server.
    *  3. Create an HTML form and:
    *      - specify a hidden field called "recipients" with the email address
    *        of the person to receive the form's results.
    *      - in the your form tag set the action attribute to
    *        the formmail.php you uploaded to your web server
    *  Once you have FormMail working, you may be interested in some advanced
    *  usage and features.  We have HOW-TO guides at www.tectite.com which
    *  describe many of the advanced processing you can do with FormMail.
    *      http://www.tectite.com/fmhowto/guides.php
    * Quicker Start
    * ~~~~~~~~~~~~~
    *  Use the FormMail Configuration Wizard here:
    *      http://www.tectite.com/wizards/fmconf.php
    *  By answering a few questions you'll get a configured FormMail and
    *  a sample HTML form ready to upload and use on your server.
    * Features
    * ~~~~~~~~
    *  For a list of features go to: http://www.tectite.com/formmailpage.php
    * Security
    * ~~~~~~~~
    *  Security is the primary concern in accepting data from your website
    *  visitors.
    *  Tectite FormMail has several security features designed into it.  Note,
    *  however, it requires configuration for your particular web site.
    * Configuration
    * ~~~~~~~~~~~~~
    *  To configure this script, go to the section titled "CONFIGURATION"
    *  (after reading the legal stuff below).
    *  There is only one mandatory setting: TARGET_EMAIL
    *  and one strongly recommended setting: DEF_ALERT
    *  Full configuration information is available here:
    *      http://www.tectite.com/fmdoc/index.php
    * Creating Forms
    * ~~~~~~~~~~~~~~
    *  Go to this URL to learn how to write HTML forms for use with
    *  Tectite FormMail: http://www.tectite.com/fmdoc/creating_forms.php
    * Copying and Use
    * ~~~~~~~~~~~~~~~
    *  Tectite FormMail is provided free of charge and may be freely distributed
    *  and used provided that you:
    *      1. keep this header, including copyright and comments,
    *         in place and unmodified; and,
    *      2. do not charge a fee for distributing it, without an agreement
    *         in writing with Root Software allowing you to do so; and,
    *      3. if you modify FormMail before distributing it, you clearly
    *         identify:
    *              a) who you are
    *              b) how to contact you
    *              c) what changes you have made
    *              d) why you have made those changes.
    * Warranty and Disclaimer
    * ~~~~~~~~~~~~~~~~~~~~~~~
    *  Tectite FormMail is provided free-of-charge and with ABSOLUTELY NO WARRANTY.
    *  It has not been verified for use in critical applications, including,
    *  but not limited to, medicine, defense, aircraft, space exploration,
    *  or any other potentially dangerous activity.
    *  By using Tectite FormMail you agree to indemnify Root Software and
    *  Open Concepts Pty Ltd, their agents, employees, directors and
    *  associated companies and businesses from any liability whatsoever.
    * We still care
    * ~~~~~~~~~~~~~
    *  If you find a bug or fault in FormMail, please report it to us.
    *  We will respond to your report and make endeavours to rectify any
    *  faults you've detected as soon as possible.
    *  To contact us please register on our forums at:
    *      http://www.tectite.com/vbforums/
    *  or view our contact information:
    *      http://www.tectite.com/contacts.php
    * Version History
    * ~~~~~~~~~~~~~~~
    *  Near the top of this file, you'll find its version. The version
    *  line looks like this:
    *       $FM_VERS = "N.MM";     /* script version ...
    *  The version history used to be located within this file.  However,
    *  starting with Version 8.00 we've moved it...
    *  You can read the complete version history of FormMail on our
    *  main website here:
    *   http://www.tectite.com/fmdoc/version_history.php
        // Capture the current date and time, for various purposes.
    $lNow = time();
    set_magic_quotes_runtime(0);        // disable this silly setting (usually not enabled)
    ini_set('track_errors',1);          // enable $php_errormsg
    $aAlertInfo = array();
    $aPHPVERSION = array();
    $sLangID = "";                      // the language ID
    $aMessages = array();               // all FormMail messages in the appropriate
                                        // language
    $bUseOldVars = IsOldVersion($aPHPVERSION);
        // seed the random number generate if not version 4.2.0 or later
    if (!IsPHPAtLeast("4.2.0"))
        mt_srand(time());
        // we set references to the appropriate arrays to handle PHP version differences
        // Session vars are selected after we start the session.
    if ($bUseOldVars)
        $aServerVars = &$HTTP_SERVER_VARS;
        $aGetVars = &$HTTP_GET_VARS;
        $aFormVars = &$HTTP_POST_VARS;
        $aFileVars = &$HTTP_POST_FILES;
        $aEnvVars = &$HTTP_ENV_VARS;
    else
        $aServerVars = &$_SERVER;
        $aGetVars = &$_GET;
        $aFormVars = &$_POST;
        $aFileVars = &$_FILES;
        $aEnvVars = &$_ENV;
    $bIsGetMethod = false;
        // If the form submission was using the GET method, switch to the
        // GET vars instead of the POST vars
    if (isset($aServerVars["REQUEST_METHOD"]) && $aServerVars["REQUEST_METHOD"] === "GET")
        $bIsGetMethod = true;
        if ($bUseOldVars)
            $aFormVars = &$HTTP_GET_VARS;
        else
            $aFormVars = &$_GET;
    if (!isset($REAL_DOCUMENT_ROOT))
        SetRealDocumentRoot();
    if (isset($aServerVars['SERVER_PORT']))
        $SCHEME = ($aServerVars['SERVER_PORT'] == 80) ? "http://" : "https://";
    else
        $SCHEME = "";
    if (isset($aServerVars['SERVER_NAME']))
        $SERVER = $aServerVars['SERVER_NAME'];
    else
        $SERVER = "";
    /* CONFIGURATION (do not alter this line in any way!!!)                      */
    * This is the *only* place where you need to modify things to use formmail.php
    * on your particular system.  This section finishes at "END OF CONFIGURATION".
    * Help for all settings can be found on our website:
    *  http://www.tectite.com/fmdoc/index.php
    * Also, above each setting is a direct URL to the help information for the
    * setting.
                /* Help: http://www.tectite.com/fmdoc/email_name.php */
    define("EMAIL_NAME","^[-a-z0-9.]+");    // the '^' is an important security feature!
                /* Help: http://www.tectite.com/fmdoc/target_email.php */
    $TARGET_EMAIL = array(EMAIL_NAME."@thebestspots\.com$");
                /* Help: http://www.tectite.com/fmdoc/def_alert.php */
    define("DEF_ALERT","[email protected]");
                /* Help: http://www.tectite.com/fmdoc/set_real_document_root.php */
    $SET_REAL_DOCUMENT_ROOT = "";       // overrides the value set by SetRealDocumentRoot function
        // override $REAL_DOCUMENT_ROOT from the $SET_REAL_DOCUMENT_ROOT value (if any)
        // Do not alter the following code (next 3 lines)!
    if (isset($SET_REAL_DOCUMENT_ROOT) && $SET_REAL_DOCUMENT_ROOT !== "")
        $REAL_DOCUMENT_ROOT = $SET_REAL_DOCUMENT_ROOT;
                /* Help: http://www.tectite.com/fmdoc/config_check.php */
    $CONFIG_CHECK = array("TARGET_EMAIL");
                /* Help: http://www.tectite.com/fmdoc/at_mangle.php */
    define("AT_MANGLE","5VLNXQL");
                /* Help: http://www.tectite.com/fmdoc/target_urls.php */
    $TARGET_URLS = array();         // default; no URLs allowed
                /* Help: http://www.tectite.com/fmdoc/head_crlf.php */
    define("HEAD_CRLF","\r\n");
                /* Help: http://www.tectite.com/fmdoc/body_lf.php */
    define("BODY_LF","\r\n");       // the new default: use this for CR+LF
    //define("BODY_LF","\n");       // the old default: just LF
                /* Help: http://www.tectite.com/fmdoc/from_user.php */
    $FROM_USER = "";                            // the default - setting not used
                /* Help: http://www.tectite.com/fmdoc/sendmail_f_option.php */
    define("SENDMAIL_F_OPTION",false);
    define("SENDMAIL_F_OPTION_LINE",__LINE__-1);    // don't modify this line!
                /* Help: http://www.tectite.com/fmdoc/fixed_sender.php */
    $FIXED_SENDER = "";
                /* Help: http://www.tectite.com/fmdoc/set_sender_from_email.php */
    define("SET_SENDER_FROM_EMAIL",false);
                /* Help: http://www.tectite.com/fmdoc/ini_set_from.php */
    define("INI_SET_FROM",false);
                /* Help: http://www.tectite.com/fmdoc/logdir.php */
    $LOGDIR = "";                           // directory for log files; empty string to
                                            // disallow log files
                /* Help: http://www.tectite.com/fmdoc/autorespondlog.php */
    $AUTORESPONDLOG = "";           // file name in $LOGDIR for the auto responder
                                    // log; empty string for no auto responder log
                /* Help: http://www.tectite.com/fmdoc/csv_file_settings.php */
    $CSVDIR = "";                       // directory for csv files; empty string to
                                        // disallow csv files
    $CSVSEP = ",";      // comma separator between fields (columns)
    $CSVINTSEP = ";";   // semicolon is the separator for fields (columns)
                        // with multiple values (checkboxes, etc.)
    $CSVQUOTE = '"';    // all fields in the CSV are quoted with this character;
                        // default is double quote.  You can change it to
                        // single quote or leave it empty for no quotes.
    //$CSVQUOTE = "'";  // use this if you want single quotes
    $CSVOPEN = "";      // set to "b" to force line terminations to be
                        // kept as $CSVLINE setting below, regardless of
                        // operating system.  Keep as empty string and
                        // leave $CSVLINE unchanged, to get text file
                        // terminations for your server's operating system.
                        // (Line feed on UNIX, carriage-return line feed on Windows).
    $CSVLINE = "\n";    // line termination for CSV files.  The default is
                        // a single line feed, which may be modified for your
                        // server's operating system.  If you want to change
                        // this value, you *must* set $CSVOPEN = "b".
                /* Help: http://www.tectite.com/fmdoc/templatedir.php */
    $TEMPLATEDIR = "";                  // directory for template files; empty string
                                        // if you don't have any templates
                /* Help: http://www.tectite.com/fmdoc/templateurl.php */
    $TEMPLATEURL = "";                  // default; no template URL
                /* Help: http://www.tectite.com/fmdoc/multiformdir.php */
    $MULTIFORMDIR = "";         // directory for multi-form template files; empty string
                                // if you're not using multi-forms
                /* Help: http://www.tectite.com/fmdoc/multiformurl.php */
    $MULTIFORMURL = "";                 // default; no multi-forms templates URL
                /* Help: http://www.tectite.com/fmdoc/authentication_settings.php */
    $AUTHENTICATE = "";
    //$AUTHENTICATE = "Basic cnVzc2VsbHI6dGVzdA==";        // example
    $AUTH_USER = "";
    $AUTH_PW = "";
                /* Help: http://www.tectite.com/fmdoc/form_ini_file.php */
    $FORM_INI_FILE = "";
                /* Help: http://www.tectite.com/fmdoc/moduledir.php */
    $MODULEDIR = ".";
                /* Help: http://www.tectite.com/fmdoc/fmcompute.php */
    $FMCOMPUTE = "fmcompute.php";
                /* Help: http://www.tectite.com/fmdoc/fmgeoip.php */
    $FMGEOIP = "fmgeoip.php";
                /* Help: http://www.tectite.com/fmdoc/advanced_templates.php */
    define("ADVANCED_TEMPLATES",false);     // set to true for advanced templates
                /* Help: http://www.tectite.com/fmdoc/limited_import.php */
    define("LIMITED_IMPORT",true);      // set to true if your database cannot
                                        // handle escaped quotes or newlines within
                                        // imported data.  Microsoft Access is one
                                        // example.
                /* Help: http://www.tectite.com/fmdoc/valid_env.php */
    $VALID_ENV = array('HTTP_REFERER','REMOTE_HOST','REMOTE_ADDR','REMOTE_USER',
                    'HTTP_USER_AGENT');
                /* Help: http://www.tectite.com/fmdoc/fileuploads.php */
    define("FILEUPLOADS",false);        // set to true to allow file attachments
                /* Help: http://www.tectite.com/fmdoc/max_file_upload_size.php */
    define("MAX_FILE_UPLOAD_SIZE",0);       // default of 0 means that other software
                                            // controls the maximum file upload size
                                            // (FormMail doesn't test the file size)
                /* Help: http://www.tectite.com/fmdoc/file_repository.php */
    $FILE_REPOSITORY = "";
                /* Help: http://www.tectite.com/fmdoc/file_mode.php */
    define("FILE_MODE",0664);     // always precede with 0 to specify octal!
                /* Help: http://www.tectite.com/fmdoc/file_overwrite.php */
    define("FILE_OVERWRITE",true);
                /* Help: http://www.tectite.com/fmdoc/next_num_file.php */
    $NEXT_NUM_FILE = "";
                /* Help: http://www.tectite.com/fmdoc/put_data_in_url.php */
    define("PUT_DATA_IN_URL",true); // set to true to place data in the URL
                                        // for bad_url redirects
                /* Help: http://www.tectite.com/fmdoc/db_see_input.php */
    define("DB_SEE_INPUT",false);       // set to true to just see the input values
                /* Help: http://www.tectite.com/fmdoc/db_see_ini.php */
    define("DB_SEE_INI",false);     // set to true to just see the ini file
                /* Help: http://www.tectite.com/fmdoc/maxstring.php */
    define("MAXSTRING",1024);           // maximum string length for a value
                /* Help: http://www.tectite.com/fmdoc/bshowmesgnumbers.php */
    $bShowMesgNumbers = false;
                /* Help: http://www.tectite.com/fmdoc/filters.php */
                /* Note for Tectite personnel: the upgrade Wizard will merge new values
                 * but be careful of $var usage and quoting in new entries.
    $FILTERS = array("encode"=>"$REAL_DOCUMENT_ROOT/cgi-bin/fmencoder -kpubkey.txt",
                    "null"=>"null",
                    "csv"=>"csv");
                /* Help: http://www.tectite.com/fmdoc/socket_filters.php */
    $SOCKET_FILTERS = array(
                     "httpencode"=>array("site"=>"YourSiteHere",
                        "port"=>80,
                        "path"=>"/cgi-bin/fmencoder",
                        "params"=>array(array("name"=>"key",
                                "file"=>"$REAL_DOCUMENT_ROOT/cgi-bin/pubkey.txt"))),
                     "sslencode"=>array("site"=>"ssl://YourSecureSiteHere",
                        "port"=>443,
                        "path"=>"/cgi-bin/fmencoder",
                        "params"=>array(array("name"=>"key",
                                "file"=>"$REAL_DOCUMENT_ROOT/cgi-bin/pubkey.txt"))),
                /* Help: http://www.tectite.com/fmdoc/filter_attribs.php */
    $FILTER_ATTRIBS = array("encode"=>"Strips,MIME=application/vnd.fmencoded,Encrypts",
                            "httpencode"=>"Strips,MIME=application/vnd.fmencoded,Encrypts",
                            "sslencode"=>"Strips,MIME=application/vnd.fmencoded,Encrypts",
                            "csv"=>"Strips,MIME=text/csv",);
                /* Help: http://www.tectite.com/fmdoc/check_for_new_version.php */
    define("CHECK_FOR_NEW_VERSION",true);
    define("CHECK_DAYS",30);
                /* Help: http://www.tectite.com/fmdoc/scratch_pad.php */
    $SCRATCH_PAD = "";
                /* Help: http://www.tectite.com/fmdoc/cleanup_time.php */
    $CLEANUP_TIME = 60;     // cleanup time in minutes
                /* Help: http://www.tectite.com/fmdoc/cleanup_chance.php */
    $CLEANUP_CHANCE = 20;     // percentage probability that cleanup will be performed
                /* Help: http://www.tectite.com/fmdoc/pear_settings.php */
    $PEAR_SMTP_HOST = "";
    $PEAR_SMTP_PORT = 25;
    $PEAR_SMTP_USER = "";
    $PEAR_SMTP_PWD = "";
                /* Help: http://www.tectite.com/fmdoc/alert_on_user_error.php */
    define("ALERT_ON_USER_ERROR",true);
                /* Help: http://www.tectite.com/fmdoc/enable_attack_detection.php */
    define("ENABLE_ATTACK_DETECTION",true);
                /* Help: http://www.tectite.com/fmdoc/attack_detection_url.php */
    define("ATTACK_DETECTION_URL","");
                /* Help: http://www.tectite.com/fmdoc/alert_on_attack_detection.php */
    define("ALERT_ON_ATTACK_DETECTION",false);
                /* Help: http://www.tectite.com/fmdoc/attack_detection_mime.php */
    define("ATTACK_DETECTION_MIME",true);
                /* Help: http://www.tectite.com/fmdoc/attack_detection_dups.php */
    $ATTACK_DETECTION_DUPS = array("realname","address1","address2","country","zip",
                                    "phone","postcode","state","email");
                /* Help: http://www.tectite.com/fmdoc/attack_detection_specials.php */
    define("ATTACK_DETECTION_SPECIALS",true);
                /* Help: http://www.tectite.com/fmdoc/attack_detection_specials.php */
    $ATTACK_DETECTION_SPECIALS_ONLY_EMAIL = array("derive_fields","required",
                        "mail_options","good_url","bad_url","good_template",
                        "bad_template");
                /* Help: http://www.tectite.com/fmdoc/attack_detection_specials.php */
    $ATTACK_DETECTION_SPECIALS_ANY_EMAIL = array("subject");
                /* Help: http://www.tectite.com/fmdoc/attack_detection_many_urls.php */
    define("ATTACK_DETECTION_MANY_URLS",0);
                /* Help: http://www.tectite.com/fmdoc/attack_detection_many_url_fields.php */
    define("ATTACK_DETECTION_MANY_URL_FIELDS",0);
                /* Help: http://www.tectite.com/fmdoc/attack_detection_url_patterns.php */
    $ATTACK_DETECTION_URL_PATTERNS = array(
                '(^|[^-a-z_.0-9]+)(?<!@)([-a-z0-9]+\.)+(com|org|net|biz|info|name|pro|tel|asia|cat)\b',
                '(^|[^-a-z_.0-9]+)(?<!@)([-a-z0-9]+\.)+(com{0,1}|org|net)\.[a-z][a-z]\b');
                /* Help: http://www.tectite.com/fmdoc/attack_detection_ignore_errors.php */
    define("ATTACK_DETECTION_IGNORE_ERRORS",false);
                /* Help: http://www.tectite.com/fmdoc/geoip_lic.php */
    $GEOIP_LIC = "";        // default - no GeoIP
                /* Help: http://www.tectite.com/fmdoc/zero_is_empty.php */
    define("ZERO_IS_EMPTY",false);
                /* Help: http://www.tectite.com/fmdoc/session_name.php */
    $SESSION_NAME = "";
                /* Help: http://www.tectite.com/fmdoc/hook_dir.php */
    $HOOK_DIR = "";
    /* UPGRADE CONTROL
    ** FILTERS:lt:8.04:merge:The FILTERS configuration has
    ** been modified to include some new standard filters.:
    ** FILTER_ATTRIBS:lt:8.04:no_keep:The FILTER_ATTRIBS configuration has
    ** been modified to include new information about the standard filters.:
    ** ATTACK_DETECTION_URL_PATTERNS:eq:8.02:no_keep:The ATTACK_DETECTION_URL_PATTERNS
    ** configuration has been modified to fix a bug.:
    ** FILTER_ATTRIBS:lt:4.00:no_keep:The FILTER_ATTRIBS configuration has
    ** been modified to include new information about the standard filters.:
    ** SET_REAL_DOCUMENT_ROOT:gt:4.07:copy_from=REAL_DOCUMENT_ROOT:The
    ** REAL_DOCUMENT_ROOT configuration has been renamed to SET_REAL_DOCUMENT_ROOT.:
    ** EMAIL_NAME:lt:6.01:no_keep:The EMAIL_NAME configuration has
    ** been modified to match hyphens ('-') in email addresses.:
    ** ZERO_IS_EMPTY:le:6.01:set_to=true:ZERO_IS_EMPTY has been
    ** set to a value that duplicates previous behaviour.:
    ** END OF CONTROL
    /* END OF CONFIGURATION (do not alter this line in any way!!!)               */
        // the following constants define all FormMail messages
    define('MSG_SCRIPT_VERSION',0);     // This script requires at least PHP version...
    define('MSG_END_VERS_CHK',1);       // If you're happy...
    define('MSG_VERS_CHK',2);           // A later version of FormMail is available...
    define('MSG_CHK_FILE_ERROR',3);     // Unable to create check file...
    define('MSG_UNK_VALUE_SPEC',4);     // derive_fields: unknown value specification...
    define('MSG_INV_VALUE_SPEC',5);     // derive_fields: invalid value specification...
    define('MSG_DERIVED_INVALID',6);    // Some derive_fields specifications...
    define('MSG_INT_FORM_ERROR',7);     // Internal form error...
    define('MSG_OPTIONS_INVALID',8);    // Some mail_options settings...
    define('MSG_PLSWAIT_REDIR',9);      // Please wait while you are redirected...
    define('MSG_IFNOT_REDIR',10);       // If you are not redirected...
    define('MSG_PEAR_OBJ',11);          // Failed to create PEAR Mail object...
    define('MSG_PEAR_ERROR',12);        // PEAR Mail error...
    define('MSG_NO_FOPT_ADDR',13);      // You have specified "SendMailFOption"...
    define('MSG_MORE_INFO',14);         // More information...
    define('MSG_INFO_STOPPED',15);      // Extra alert information suppressed...
    define('MSG_FM_ALERT',16);          // FormMail alert
    define('MSG_FM_ERROR',17);          // FormMail script error
    define('MSG_FM_ERROR_LINE',18);     // The following error occurred...
    define('MSG_USERDATA_STOPPED',19);  // User data suppressed...
    define('MSG_FILTERED',20);          // This alert has been filtered...
    define('MSG_TEMPLATES',21);         // You must set either TEMPLATEDIR or TEMPLATEURL...
    define('MSG_OPEN_TEMPLATE',22);     // Failed to open template...
    define('MSG_ERROR_PROC',23);        // An error occurred while processing...
    define('MSG_ALERT_DONE',24);        // Our staff have been alerted...
    define('MSG_PLS_CONTACT',25);       // Please contact us directly...
    define('MSG_APOLOGY',26);           // We apologize for any inconvenience...
    define('MSG_ABOUT_FORMMAIL',27);    // Your form submission was processed by...
    define('MSG_PREG_FAI

  • I dont have audio wave forms in timeline

        I DONT SEE AUDIO WAVE FORMS IN TIMELINE , I CN HEAR DE SOUND

    Right click on the track hight toggle (Bottom left) and select "show audio waveforms"
    DM

  • JPG won't display in Image box.

    Trying to add a logo in JPG format to the top of the form using the Image control, but it won't display the image nor print it. If I use a GIF file it works fine, but looks horrible. I'm new at this, any ideas?

    I finally figured it out after posting another frustrating comment to this thread. I can't take the credit, however, as it was quickly solved by Irv Kanode in another thread. I have copied his exact post below. It solved this issue in seconds:
    ADOBE SUPPORT REPLY:
    Irv Kanode - 4:15pm May 5, 06 PST (#1 of 2)
    Check some of your JPEGs for CMYK vs RGB.
    Might the ones that fail be CMYK and the ones that work be RGB?
    When images don't work are you seeing a broken image icon or...?
    Irv
    Adobe Support
    USER FOLLOWUP TO ADOBE SUPPORT SUGGESTION:
    Kurt Wedberg - 5:27pm May 5, 06 PST (#2 of 2)
    Irv,
    Thanks for the reply. The images that didn't work were CMYK. When I converted to RGB they worked.
    The images that didn't work were coming up with random grey scale colors.
    Thanks again,
    Kurt
    Hope this helps everyone!

  • Dynamic text won't display

    I don't know if this is a bug. I have a movie that contains a
    dynamic text. When I run it, the text displays fine. But when the
    said movie is run through another movie clip (using loadMovie), the
    dynamic text won't display. Any ideas why? Thank you.

    dongzky wrote:
    > Actually, there was no code involved. The dynamic text,
    with borders around it,
    > I tried to put a value for testing. It works fine when
    run. But when called
    > by another movie clip, although the movie with the
    dynamic text still loads,
    > the text won't display anymore. Even the borders were
    gone.
    Than again, it's a bug on your end :)
    Dynamic text is a text container, it's to be use with
    dynamically given data, from
    source file or variable string on timeline. It's not meant to
    be for regular text
    display. You need to use Static text. The fact that you can
    see it it's just flash
    being tolerant but it only lasts for as long as the movie is
    getting more complex.
    You can get away with somethings even tho you should not be
    using them, does not
    mean they will work all the way. Dynamic text, as said above
    is for text that comes
    to flash from outside source and this is when it works best.
    Best Regards
    Urami
    <urami>
    If you want to mail me - DO NOT LAUGH AT MY ADDRESS
    </urami>

  • Text won't display

    my text won't display properly (size and position) in premeire elements 7

    dannyellis1
    What computer operating system are you running the Premiere Elements 7 program?
    Is this a "it worked before but not now" type of issue or "it never worked before"?
    Where is the text not displaying correctly...in the opened Titler, in the disc menu window in the Create Menus section of the program, other, or everywhere?
    Is your video card driver up to date according to the web site of the manufacturer of the video card?
    You mention size and position. What about font type?
    Also, please include:
    a. computer resources description
    b. properties of your source media
    c. project preset
    d. description of Timeline content and duration
    Let us start here and then decide what next.
    Thanks.
    ATR

  • Swf files won't display in Safari

    My swf files won't display in Safari but they will work in IE. I'm using Dreamweaver 3 and Flash 4 to build the website and movies. See below.
    <html>
    <head>
    <title>Untitled Document</title>
    <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
    <script language="JavaScript">
    <!--
    function MM_findObj(n, d) { //v3.0
    var p,i,x; if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) {
    d=parent.frames[n.substring(p+1)].document; n=n.substring(0,p);}
    if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[n];
    for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers.document); return x;
    function MM_controlShockwave(objStr,x,cmdName,frameNum) { //v3.0
    var obj=MM_findObj(objStr);
    if (obj) eval('obj.'cmdName+'('+((cmdName=='GotoFrame')?frameNum:'')')');
    //-->
    </script>
    </head>
    <body bgcolor="#FFFFFF">
    <object classid="clsid:166B1BCA-3F9C-11CF-8075-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/director/sw.cab#ver sion=7,0,2,0" width="720" height="28" name="dance1" onLoad="MM_controlShockwave('dance1','','Play')">
    <param name="src" value="../Images/dancewords1.swf">
    <embed src="../Images/dancewords1.swf" pluginspage="http://www.macromedia.com/shockwave/download/" width="720" height="28" name="dance1" swliveconnect="true">
    </embed>
    </object>
    </body>
    </html>

    A direct link to the site in question helps. Posting your code here isn't much help since the .swf file is stored on your server and can't be tested by the helpers here
    -Ryan

Maybe you are looking for

  • Subtitles get enlarged in 16:9 sequence

    I have a PAL DV 4:3 project that I have been converting to 16:9. I created a new sequence and changed the setting to 16:9 anamorphic. The frame size is 720x576, aspect ratio CCIR 601/DV PAL (5:4), pixel aspect ratio CCIR 601 (720x576). I pasted all o

  • Netflix turns on my I-Tunes and plays a song.

    If I turn on Netflix on my Apple TV, it works  -- but it also turns on my I-Tunes and plays a song. I walk over to my computer and turn it off, but it simply happens again next time I use the Apple TV remote.   (I-Tunes, and the first song in my play

  • IDOCS OUTBOUND

    HI I WAS CREATED ONE SALES ORDER 560. NOW  I  WANT TO CREATE IDOC FOR THIS SALES ORDER 560, OUTBOUND (ACKN) AND INVOICE. I DON'T KNOW HOW TO CREATE IDOC  CAN YOU SEND ME  PROCEDURE HOW  TO CREATE OUTBOUND IDOCS FOR THIS SALES ORDER  IN SAP . THANKS M

  • Overloud's TH1 Amp Sim FLAT OUT RAWKS

    Just PURCHASED Overloud's TH1 last night - and NO I didn't Pirate it either IT'S THAT FRIGGIN' GOOD! I tried the demo out a few weeks ago and was amazed at the sounds I was getting - sounded closer to real amps than Amplitube, Guitar Rig, etc. in my

  • Running Ant Propagation

    Hi, I've a problem when running Ant Propagation against my BEA Weblogic Portal 9.2 server. I've read the documentation, http://edocs.bea.com/wlp/docs92/prodOps/scripts.html, and configured my Ant Propagation Script. I can do <b>pingSrc/pingDest</b> a