WAVEBURNER 3 - How do we check resulting Red Book Master CD?

Dear all
I'm in a quandary. Happily mastered and EQ'd a soundtrack album ready for the pressing plant using WAVEBURNER 3 (from Logic 8 bundle) .... as always, everything is very last minute and this has to fly to another country (remember good old times when physical things went by courier?!) a question:-
What can we use to check the master CD has everything it should (ie correct titles- ISRC codes - Bar Codes etc) ....... I once made a mistake with a foreign pressing plant which had a 3 day delay in courier time between me and the pressing plant and one track had the wrong ISRC code.
Surely there should be a way to double check a Red Book Audio master CD?
If not perhaps WAVEBURNER should build this into their software?
Anybody else had this problem? What do you check back your master CD's with?
All the best
Dick

Thank you so much John ....... been in a two and eight this last few days ..... but that's the command! I have seen other people mention this as a way to read codes but until your info never been given the correct instruction for TERMINAL. That's the trick ..... you can read everything now,
BTW if anyone at WAVEBURNER reads here ...... IT WOULD BE A GREAT FACILITY TO BE ABLE TO CHECK THE RESULTING CODE INFO OFF A CD BURN as a double check.
10 days ago I sent a Red Book CD mastered in WAVEBURNER to a German pressing plant for manufacture by courier. (This was to coincide with a TV mini series which opens in Germany ....... so a last minute panic! ) I had a call from the record company to say there was a track ISRC code missing on just one track ...... I'd missed it whilst putting the info into WAVEBURNER ....... chances are that I would have noticed this if I'd had facility to check back the resulting CD burn codes.
However thanks to John ..... I now see how to do this using TERMINAL ...... but there is much mis-information out there in Forum Land about what instruction to type in and it would be great advantage to have this facility in WAVEBURNER?
All best wishes
Dick
Best wishes
Richard

Similar Messages

How can I check my Mac book pro as it is running very slow

My mac book pro has just sterted to run very slow indeed. I noticed it after I registered to use Knowhow cloud.
I wondered if anyone else has had a simular problem, and if you can help me.
Many thanks

Lisadawson11 wrote:
My mac book pro has just sterted to run very slow indeed. I noticed it after I registered to use Knowhow cloud.
Well it depends what you have backed up to their cloud service.
If it's a lot, it's going to take a long time to upload all your stuff as Internet Service Providers restrict upload speeds to a fraction of their download speeds.
Cloud backups is bad, the data can be snooped on without a warrant, it can be lost and it's slow as heck unless it's only a small amount.
If you don't know what your doing, then disconnect from the Internet and uninstall their software, use a external drive you can get from any computer or office store and connect it to the Mac, when TimeMachine pops up and asks, say yes and let it work overnight to create your first backup (takes the longest)
Forget the Cloud, it's a joke.

Layout & Red Book

Hi- Can someone answer these for me please! First off, after I build a VIDEO_TS folder and click on the layout file to burn, it attempts to launch DVDSP and I get the DVDSP splash screen, but it hangs there forever and never opens up. What could be wrong?
Also, when I'm burning from DVDSP how do I create a red book disc (ie, 1x speed burn).
Thanks a lot
Robert

MIDI Sequencing and VSTi support is not available in Audition CS6. There was a lot of primary feature development this cycle, and I would not have wanted to make the compromises to a MIDI environment that would have been necessary to squeeze it in this cycle.
MIDI composition support remains in our feature backlog and is considered for each release, but there are several reasons it doesn't typically bubble up higher in priority. Audition and Cool Edit always shined as audio editing tools, and this has always been the focus of the team with MIDI support sort of an afterthought, but never our core competency. With Audition 3, we built a basic MIDI Sequencer with VSTi support, but ran into some implementation speed bumps when plugging it into the existing playback engine that resulted in a less-than-great experience in my opinion. It functioned, but I've never felt it held up to the other areas of Audition in terms of usability and simplicity.
I know there are those on the team - myself included - that would love to develop a full MIDI environment, and while it's never been a highly-demanded feature, I know plenty of users would like a basic composition workflow in Audition as well. If we tackle this, I would hope we can take the time and resources to design a very competent interface that you enjoy using, and not just build something as a check mark on a feature list. We can start a separate thread on this, perhaps in the Feature Request forum, and discuss in detail what sort of functionality and tools you would like to see in Audition to support MIDI and virtual instruments.

How do I check if a cell is an error (Red triangle)?

How do I check if a cell contains an error (Ie. a red triangle)? I can't seem to find an apropriate function, nor an answer using the search function on this board (Nor Google).
Otherwise I'll have to do a ton of IF functions to fix it...

Hi David,
"How do I check if a cell contains an error?"
To check if a cell contains an error, you look at the cell. If it shows a red triangle, it contains an error.
Do you mean 'How do I fix an error?"
That depends on what the error is. You start by clicking the error triangle to view the error message.
If it says "The formula contains a syntax error," you examine the formula carefully to find the syntax error, then correct the error. The most common source of syntax errors in complex formulas is misplacing one or more parentheses.
If it says "bad reference" you examine the cell references in the formula to see if one or more is beyond the boundaries of the table referenced.
Other error messages require other detective work.
Can you clarify the issue with more specific details? What do you mean by "an appropriate function"? Appropriate to what purpose?
Regards,
Barry

R3 - XI - Auto-ID:How to check result of Idocs sending out from R3 in aii ?

Hi,
I am implementing the SAP RFID-Enabled Outbound Delivery Process, the installation and configuration guide have been provided from SAP; able to d/l from SAP web site. Right now, I have 3 servers already installed components for this scenario:
1.SAP R/3
2.SAP XI 3.0;
3.SAP Auto-ID(Auto-ID) v2.1
Currently, I can send Material Master Idocs out from R/3, using t-code: AIDMM. And then I check the inbound Material Master Idoc in SAP XI, the status of Inbound Idocs is "Processed Successfully" and Ack. Status is "Still waiting acknowledgment". I have the following questions:
1. Why does Ack. Status is "Still waiting acknowledgment"? Which server should send the acknowledgment back to it?
2. How do I check the result in Auto-ID server? It suppose to have the submitted Material in Auto-ID server, doesn't it? I tried to check data in Auto-ID Cockpit->Master Data->Product and then click 'Go' but no result display.
Please advise as the questions above. If you want more information please let me know
Thanks,

Hello,
<u>Point 1 :</u>
You have "Still awaiting ack" until the receiver send you an acknowledgement.
If you don't want ack you can customize the table IDXNOALE in XI (SE12).
I don't know Auto-ID but if it is a SAP system like R/3, you can use the SAP documentation named : HowTo_IDOC_Ack.pdf to send acknowledgment.
https://websmp201.sap-ag.de/~sapdownload/011000358700004003762004E/HowTo_IDOC_Ack_20040817RR.pdf
<u>Point 2 :</u>
If transaction "we02" exist you can see your IDOC.
Regards,
Chris
Message was edited by: Christophe DUMONT

Just bought the ipad mini and on my mail icon it has a red dot with the number 15. Earlier this morning it said 3 and I checked it and have no new messages. How do I get the red dot off of the icon?

Just bought the ipad mini and on my mail icon the red dot is appearing and I have no new messages, only sent one message and no saved messages. How do I get the red dot to go away. Thank you for any help you can give me.

Tap Settings
Tap Notifications
Tap Mail
Tap the name of your email account (if you have more than one)
Look for Badge App Icon (see image below)

Control-k key binding broken. How can I check and change my key bindings?

I use the Terminal app a lot. Unfortunately I am not able to use the control-k shortcut to cut lines in the terminal anymore. How can I check (and change) the Terminal key bindings?
Thank you!

Basing on your input, you should get the following values:
1) session keys
SK_ENC: 6DCE2A99BACB5207A7A96A92F114D66C
SK_MAC: 0D446132B168F75CD6F0A780693A4DD3
SK_DEK: 19F7B0F94837F32874B29B5EFB7809F6
2) host cryptogram
1B781553209748EA
3) Retail MAC
01761103B810F00E
Summing up, the External Authenticate command should have the following value: 84 82 01 00 10 1B781553209748EA 01761103B810F00E.
Try to compare it with your results.
Regards

How can i check if a procedure exists in a certain database version

So today i became really frustrated after noticing that the Oracle SQL version on some computer I needed to work on was 10.1. The problem with that was that I needed a procedure called "xmlserialize". I browsed the documentation for it, but I didn't see anything like "since 11.0" or something similar.
So.. how can I see what is the first Oracle SQL version that supported some procedure?
For example, when I check a class definition for Java, I consult the javadoc :
http://docs.oracle.com/javase/7/docs/api/java/math/BigInteger.html
and there there's a field called "Since". For BigInteger ( it's just an example ), it says "Since: JDK1.1", so I know that if I'm using a JDK version earlier that 1.1, I won't have that class.
Is there some similar information for Oracle procedures/ functions/ features/ etc?

>
Let me be more explicit. I've searched for xmlserialize function.
The only place on the website that holds information regarding this function is this page:
>
To paraphrase sybrand - that's utter nonsense. I have never found only one reference to anything on the web.
Your question subject is
>
how can i check if a procedure exists in a certain database version
>
And since you said you were using 10.1 I searched for
>
oracle 10.1 xmlserialize
>
And the very first link on the search results is
>
What's New In Oracle XML DB?
http://docs.oracle.com/cd/B19306_01/appdev.102/b14259/whatsnew.htm
>
That link is for the XML Db Dev Guide for 10g Release 2
Would you like to guess what you find if you search for xmlserialize?
Right on the very first page is this
>
Oracle Database 10g Release 2 (10.2) New Features in Oracle XML DB
SQL/XML Standard Compliance (SQL:2005 Standard Part 14)
Support for the developing SQL/XML standard has been extended. The following SQL functions have been added: XMLPI, XMLComment, XMLRoot, XMLSerialize, XMLCDATA, and XMLParse. Escaping of identifiers has also been updated, in accordance with a change to the SQL/XML standard. See "Generating XML Using SQL Functions".
>
Did you notice the second sentence? I removed the clutter to make it easier to see.
>
The following SQL functions have been added: . . .XMLSerialize. . .
>
Fnding information can't get any easier than that.

Mac book running slow I tried etresoft but not sure how to inturpret the resultsmac book running slow I tried etresoft but not sure how to inturpret the result

mac book running slow I tried etresoft but not sure how to inturpret the results any help would be so awesome, thank you
Problem description:
Computer started running very slowly, when I type there is a delay and internet connection is very slow although it is not the wifi connection because it is running well on all other computers, phones, ect.
EtreCheck version: 2.1.8 (121)
Report generated March 28, 2015 12:02:27 PM HST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (13-inch, Late 2011) (Technical Specifications)
    MacBook Pro - model: MacBookPro8,1
    1 2.4 GHz Intel Core i5 CPU: 2-core
    4 GB RAM
        BANK 0/DIMM0
            2 GB DDR3 1333 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1333 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 640
Video Information: ℹ️
    Intel HD Graphics 3000 - VRAM: 384 MB
        Color LCD 1280 x 800
System Software: ℹ️
    Mac OS X 10.7.5 (11G63) - Time since boot: 24 days 0:56:6
Disk Information: ℹ️
    ST9500325ASG disk0 : (500.11 GB)
        disk0s1 (disk0s1) <not mounted> : 210 MB
        Macintosh HD (disk0s2) / : 499.25 GB (422.45 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
    MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
    Apple, Inc. MacBook Pro
Launch Agents: ℹ️
    [running]    com.Affinegy.InstaLANa.plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [unknown]    com.Affinegy.InstaLANd.plist [Click for support]
    [loaded]    com.google.keystone.daemon.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [failed]    com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist [Click for details]
    [running]    com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Application Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    GrowlHelperApp    Application (/Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlHelperApp.app)
    Belkin Router Monitor    Application (/Applications/Belkin/Belkin Router Monitor.app)
    AdobeResourceSynchronizer    Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
    Dropbox    Application (/Applications/Dropbox.app)
    Spotify    Application (/Applications/Spotify.app)
Internet Plug-ins: ℹ️
    FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.1
    AdobePDFViewerNPAPI: Version: 10.1.3 [Click for support]
    AdobePDFViewer: Version: 10.1.3 [Click for support]
    Flash Player: Version: 16.0.0.305 - SDK 10.6 Outdated! Update
    OfficeLiveBrowserPlugin: Version: 12.3.5 [Click for support]
    SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Click for support]
    Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
    DirectorShockwave: Version: 12.1.3r153 - SDK 10.6 [Click for support]
    JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    Growl [Click for support]
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
        22%    iTunes
         5%    ReportCrash
         2%    WindowServer
         1%    Microsoft PowerPoint
         1%    Google Chrome
Top Processes by Memory: ℹ️
    241 MB    Google Chrome
    137 MB    Google Chrome Helper
    107 MB    Microsoft PowerPoint
    103 MB    Dropbox
    94 MB    mds
Virtual Memory Information: ℹ️
    440 MB    Free RAM
    2.27 GB    Active RAM
    536 MB    Inactive RAM
    1.05 GB    Wired RAM
    8.03 GB    Page-ins
    908 MB    Page-outs
Diagnostics Information: ℹ️
    Mar 28, 2015, 12:01:57 PM    /Library/Logs/DiagnosticReports/Belkin Router Monitor & Setup_2015-03-28-120157_[redacted].crash
    Mar 28, 2015, 12:01:36 PM    /Library/Logs/DiagnosticReports/Belkin Router Monitor & Setup_2015-03-28-120136_[redacted].crash
    Mar 28, 2015, 12:01:36 PM    /Library/Logs/CrashReporter/Belkin Router Monitor & Setup_2015-03-28-120136_[redacted].crash
    Mar 28, 2015, 12:01:25 PM    /Library/Logs/DiagnosticReports/Belkin Router Monitor & Setup_2015-03-28-120125_[redacted].crash
    Mar 28, 2015, 12:01:14 PM    /Library/Logs/DiagnosticReports/Belkin Router Monitor & Setup_2015-03-28-120114_[redacted].crash
    Mar 28, 2015, 12:01:14 PM    /Library/Logs/CrashReporter/Belkin Router Monitor & Setup_2015-03-28-120114_[redacted].crash
    Mar 28, 2015, 12:00:31 PM    /Library/Logs/DiagnosticReports/Belkin Router Monitor & Setup_2015-03-28-120031_[redacted].crash
    Mar 28, 2015, 12:00:20 PM    /Library/Logs/CrashReporter/Belkin Router Monitor & Setup_2015-03-28-120020_[redacted].crash
    Mar 28, 2015, 12:00:20 PM    /Library/Logs/DiagnosticReports/Belkin Router Monitor & Setup_2015-03-28-120020_[redacted].crash
    Mar 28, 2015, 12:00:10 PM    /Library/Logs/DiagnosticReports/Belkin Router Monitor & Setup_2015-03-28-120010_[redacted].crash
    Mar 28, 2015, 12:00:10 PM    /Library/Logs/CrashReporter/Belkin Router Monitor & Setup_2015-03-28-120010_[redacted].crash
    Mar 28, 2015, 11:59:59 AM    /Library/Logs/DiagnosticReports/Belkin Router Monitor & Setup_2015-03-28-115959_[redacted].crash
    Mar 28, 2015, 11:59:47 AM    /Library/Logs/DiagnosticReports/Belkin Router Monitor & Setup_2015-03-28-115947_[redacted].crash
    Mar 28, 2015, 11:59:38 AM    /Library/Logs/CrashReporter/Belkin Router Monitor & Setup_2015-03-28-115938_[redacted].crash
    Mar 28, 2015, 11:59:29 AM    /Library/Logs/CrashReporter/Belkin Router Monitor & Setup_2015-03-28-115929_[redacted].crash
    Mar 28, 2015, 11:59:20 AM    /Library/Logs/CrashReporter/Belkin Router Monitor & Setup_2015-03-28-115920_[redacted].crash
    Mar 28, 2015, 11:59:09 AM    /Library/Logs/DiagnosticReports/Belkin Router Monitor & Setup_2015-03-28-115909_[redacted].crash
    Mar 28, 2015, 11:59:09 AM    /Library/Logs/CrashReporter/Belkin Router Monitor & Setup_2015-03-28-115909_[redacted].crash
    Mar 28, 2015, 11:58:57 AM    /Library/Logs/DiagnosticReports/Belkin Router Monitor & Setup_2015-03-28-115857_[redacted].crash
    Mar 28, 2015, 11:58:57 AM    /Library/Logs/CrashReporter/Belkin Router Monitor & Setup_2015-03-28-115857_[redacted].crash
    Mar 28, 2015, 11:58:45 AM    /Library/Logs/CrashReporter/Belkin Router Monitor & Setup_2015-03-28-115845_[redacted].crash
    Mar 28, 2015, 12:01:45 PM    /Library/Logs/DiagnosticReports/Belkin Router Monitor & Setup_2015-03-28-120145_[redacted].crash
    Mar 28, 2015, 12:01:45 PM    /Library/Logs/CrashReporter/Belkin Router Monitor & Setup_2015-03-28-120145_[redacted].crash
    Mar 28, 2015, 12:01:03 PM    /Library/Logs/CrashReporter/Belkin Router Monitor & Setup_2015-03-28-120103_[redacted].crash
    Mar 28, 2015, 12:00:54 PM    /Library/Logs/DiagnosticReports/Belkin Router Monitor & Setup_2015-03-28-120054_[redacted].crash
    Mar 28, 2015, 12:00:54 PM    /Library/Logs/CrashReporter/Belkin Router Monitor & Setup_2015-03-28-120054_[redacted].crash
    Mar 28, 2015, 12:00:42 PM    /Library/Logs/DiagnosticReports/Belkin Router Monitor & Setup_2015-03-28-120042_[redacted].crash
    Mar 28, 2015, 12:00:42 PM    /Library/Logs/CrashReporter/Belkin Router Monitor & Setup_2015-03-28-120042_[redacted].crash
    Mar 28, 2015, 11:59:47 AM    /Library/Logs/CrashReporter/Belkin Router Monitor & Setup_2015-03-28-115947_[redacted].crash
    Mar 28, 2015, 11:59:29 AM    /Library/Logs/DiagnosticReports/Belkin Router Monitor & Setup_2015-03-28-115929_[redacted].crash
    Mar 28, 2015, 11:59:20 AM    /Library/Logs/DiagnosticReports/Belkin Router Monitor & Setup_2015-03-28-115920_[redacted].crash
    Mar 28, 2015, 12:02:18 PM    /Library/Logs/DiagnosticReports/Belkin Router Monitor & Setup_2015-03-28-120218_[redacted].crash
    Mar 28, 2015, 12:02:06 PM    /Library/Logs/CrashReporter/Belkin Router Monitor & Setup_2015-03-28-120206_[redacted].crash
    Mar 28, 2015, 12:02:06 PM    /Library/Logs/DiagnosticReports/Belkin Router Monitor & Setup_2015-03-28-120206_[redacted].crash
    Mar 28, 2015, 12:01:57 PM    /Library/Logs/CrashReporter/Belkin Router Monitor & Setup_2015-03-28-120157_[redacted].crash
    Mar 28, 2015, 12:01:25 PM    /Library/Logs/CrashReporter/Belkin Router Monitor & Setup_2015-03-28-120125_[redacted].crash
    Mar 28, 2015, 12:01:03 PM    /Library/Logs/DiagnosticReports/Belkin Router Monitor & Setup_2015-03-28-120103_[redacted].crash
    Mar 28, 2015, 12:00:31 PM    /Library/Logs/CrashReporter/Belkin Router Monitor & Setup_2015-03-28-120031_[redacted].crash
    Mar 28, 2015, 11:59:59 AM    /Library/Logs/CrashReporter/Belkin Router Monitor & Setup_2015-03-28-115959_[redacted].crash
    Mar 28, 2015, 11:59:38 AM    /Library/Logs/DiagnosticReports/Belkin Router Monitor & Setup_2015-03-28-115938_[redacted].crash

Update your Belkin router software along with Affinegy software.

Call function in background task... How to get the result?

I want to use Call function in background task parameter.
But I cannot find the result of this function. (No export parameter, no table result, no exception)
How to get the result of this function module? Correct or not?

Hi Heinz,
You can check the result in SM58 transaction.
For more information pls. refer this thread :
No IMPORTING parameters allowed in CALL FUNCTION IN BACKGROUND TASK
Best regards,
Prashant

How i can check my phone is under warrenty???????

i want to know, how i can check my phone warrenty period and my phone originallty...........

Hi krishanjaat
It would help if you carry out *#0000# and post the results, if you want more help with this matter.
Happy to have helped forum in a small way with a Support Ratio = 37.0

How can I check the version of the rdf file?

Dear all:
How can I check the version of the rdf file? such like CEXRECRE.rdf .
my environment is : oracle 11.5.9
platform : Linux red hat 4.0
Regards
Terry

Terry,
Use "adident" or "strings -a" commands -- See (Note: 125922.1 - How To Find Oracle Application File Versions) for details.
Thanks,
Hussein

How can we generate result set report?

how can we generate result set report ?means the out put of one query be the input of another query?how it is?

Hi
You have to use APD ( analysis process designer) to use results of one query as the input for the other queries.
Check this link
http://help.sap.com/saphelp_nw70/helpdata/en/49/7e960481916448b20134d471d36a6b/frameset.htm
Regards

How to import payroll result from 3rd party system to SAP

Hi Experts,
May i know how to import payroll result from legacy system / 3rd party payroll system into SAP.
i need to import the payroll result from Jan - April (from 3rd party payroll system) and system go live on May. I using payroll malaysia.
Thanks.

check this link
http://help.sap.com/saphelp_40b/helpdata/en/91/80e9087834d111a4620060b03c3b0e/content.htm

Extended Program Check results in Internal table

HI,
How to get the Extended program check results into an internal table .
Thanks in advance.
Manohar

Hi,
Try using function module EXTENDED_PROGRAM_CHECK
Make sure the import parameter TEST_ALL = 'X' (By default it is not checked
Regards

WAVEBURNER 3 - How do we check resulting Red Book Master CD?

Similar Messages

Maybe you are looking for