WaveBurner does't burn CD (Invalid field in CDB)

+a lack of free space on my hard drive (10 GB unused).+
I don't know what the 'invalid field in cdb' is, but that amount of free space is not enough to run the app. You need to keep at least 25 GB free.
However, I researched that error message and it may indeed be some incompatibility with the drive.
Can you create a disk image file?
If so, then iDVD is not the problem. You can then probably burn to disk from the disk image file using Disk Utility or Toast.
Post back if this does not help.

Similar Messages

WaveBurner - invalid field in cdb

I have been using logic for years and have never had this problem with Waveburner. I went to burn a copy of a master, the only difference in it and earlier copies is I was adding the ISRC. When trying to burn I got this message:
"Disk drive didn't respond properly and cant recover or retry. Invalid field in CDB"
Any ideas on what the problem might be?
WaveBurner 1.6.1.(331.9)
Model Name:          MacBook Pro, Mac OS X (10.6.8)
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.66 GHz
L2 Cache:          6 MB
Memory:          4 GB
Bus Speed:          1.07 GHz
HL-DT-ST DVDRW GS21N:
Firmware Revision:          SA18
Interconnect:          ATAPI
Burn Support:          Yes (Apple Shipping Drive)
Cache:          2048 KB
Reads DVD:          Yes
CD-Write:          -R, -RW
DVD-Write:          -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies:          CD-TAO, CD-SAO, CD-Raw, DVD-DAO

+a lack of free space on my hard drive (10 GB unused).+
I don't know what the 'invalid field in cdb' is, but that amount of free space is not enough to run the app. You need to keep at least 25 GB free.
However, I researched that error message and it may indeed be some incompatibility with the drive.
Can you create a disk image file?
If so, then iDVD is not the problem. You can then probably burn to disk from the disk image file using Disk Utility or Toast.
Post back if this does not help.

Daily Messages relating to (invalid field in cdb)

Hello all,
I am investigating a set of messages that occur at the same time every day. See excerpt below. They occur at 9:41 everyday and are shown in the oldest messages file which go as far back as May 1st. Is there anyway to find out what is causing these messages? The server is a Sun-Fire V440 running Solaris 9 with c1t0d0 and c1t1d0 hardware raided. I was not a part of the original setup so I do not have much details on how the initial configurations went. I have searched the net and found that the ASC:0x24 basically indicates an illegal request was sent to the device and is of no harm, but I want to know why they occur at the same time every day. Any help will be greatly appreciated. Thanks
May 29 09:41:15 servername scsi: [ID 107833 kern.warning] WARNING: /pci@1f,700000/scsi@2/sd@0,0 (sd1):
May 29 09:41:15 servername      Error for Command: inquiry Error Level: Informational
May 29 09:41:15 servername scsi: [ID 107833 kern.notice]      Requested Block: 0 Error Block: 0ear
May 29 09:41:15 servername scsi: [ID 107833 kern.notice]      Vendor: LSILOGIC Serial Number: LSI INTERNAL
May 29 09:41:15 servername scsi: [ID 107833 kern.notice]      Sense Key: Illegal Request
May 29 09:41:15 servername scsi: [ID 107833 kern.notice]      ASC: 0x24 (invalid field in cdb), ASCQ: 0x0, FRU: 0x0
May 30 09:41:16 servername scsi: [ID 107833 kern.warning] WARNING: /pci@1f,700000/scsi@2/sd@0,0 (sd1):
May 30 09:41:16 servername      Error for Command: inquiry Error Level: Informational
May 30 09:41:16 servername scsi: [ID 107833 kern.notice]      Requested Block: 0 Error Block: 0
May 30 09:41:16 servername scsi: [ID 107833 kern.notice]      Vendor: LSILOGIC Serial Number: LSI INTERNAL
May 30 09:41:16 servername scsi: [ID 107833 kern.notice]      Sense Key: Illegal Request
May 30 09:41:16 servername scsi: [ID 107833 kern.notice]      ASC: 0x24 (invalid field in cdb), ASCQ: 0x0, FRU: 0x0
May 31 09:41:16 servername scsi: [ID 107833 kern.warning] WARNING: /pci@1f,700000/scsi@2/sd@0,0 (sd1):
May 31 09:41:16 servername      Error for Command: inquiry Error Level: Informational
May 31 09:41:16 servername scsi: [ID 107833 kern.notice]      Requested Block: 0 Error Block: 0
May 31 09:41:16 servername scsi: [ID 107833 kern.notice]      Vendor: LSILOGIC Serial Number: LSI INTERNAL
May 31 09:41:16 servername scsi: [ID 107833 kern.notice]      Sense Key: Illegal Request
May 31 09:41:16 servername scsi: [ID 107833 kern.notice]      ASC: 0x24 (invalid field in cdb), ASCQ: 0x0, FRU: 0x0

Well from the old explorers I am inclined to think maybe its something else and not processes. Maybe what you said about the LSI card drivers sending bad values to the scsi drivers. From the old explorers also there was no iostat or vmstat or anything that looks suspicious in the process list. I am inclined to believe these messages existed since installation of the server.
Dec 26 15:05:06 servername scsi: [ID 107833 kern.warning] WARNING: /pci@1f,700000/scsi@2/sd@0,0 (sd1):
Dec 26 15:05:06 servername Error for Command: inquiry Error Level: Informational
Dec 26 15:05:06 servername scsi: [ID 107833 kern.notice] Requested Block: 0 Error Block: 0
Dec 26 15:05:06 servername scsi: [ID 107833 kern.notice] Vendor: LSILOGIC Serial Number: LSI INTERNAL
Dec 26 15:05:06 servername scsi: [ID 107833 kern.notice] Sense Key: Illegal Request
Dec 26 15:05:06 servername scsi: [ID 107833 kern.notice] ASC: 0x24 (invalid field in cdb), ASCQ: 0x0, FRU: 0x0
Dec 27 15:05:07 servername scsi: [ID 107833 kern.warning] WARNING: /pci@1f,700000/scsi@2/sd@0,0 (sd1):
Dec 27 15:05:07 servername Error for Command: inquiry Error Level: Informational
Dec 27 15:05:07 servername scsi: [ID 107833 kern.notice] Requested Block: 0 Error Block: 0
Dec 27 15:05:07 servername scsi: [ID 107833 kern.notice] Vendor: LSILOGIC Serial Number: LSI INTERNAL
Dec 27 15:05:07 servername scsi: [ID 107833 kern.notice] Sense Key: Illegal Request
Dec 27 15:05:07 servername scsi: [ID 107833 kern.notice] ASC: 0x24 (invalid field in cdb), ASCQ: 0x0, FRU: 0x0
Dec 28 15:05:06 servername scsi: [ID 107833 kern.warning] WARNING: /pci@1f,700000/scsi@2/sd@0,0 (sd1):
Dec 28 15:05:06 servername Error for Command: inquiry Error Level: Informational
Dec 28 15:05:06 servername scsi: [ID 107833 kern.notice] Requested Block: 0 Error Block: 0
Dec 28 15:05:06 servername scsi: [ID 107833 kern.notice] Vendor: LSILOGIC Serial Number: LSI INTERNAL
Dec 28 15:05:06 servername scsi: [ID 107833 kern.notice] Sense Key: Illegal Request
Dec 28 15:05:06 servername scsi: [ID 107833 kern.notice] ASC: 0x24 (invalid field in cdb), ASCQ: 0x0, FRU: 0x0

Invalid field in parameter list. (0x26, 0x00)

I was archiving my old family videos and making a nice movie of them in final cut express. I exported them the same as I always do and created a menu using the reflections theme in iDVD. The movie was big so I adjusted the settings for DVD+R DL as I hae done before and clicked burn. I use and external Sony DVD Burner that is wonderful and has never given me any trouble.
After about ten hours I came back and there was an error message.
Burning Finished
Errors were found during the burning process
OK
When I clicked on the down arrow this appeared...
The recording device reported the illegal request: Invalid field in parameter list. (0x26, 0x00.)
So i clicked ok and this appeared...
Multiplexor Error
There was a problem during multiplexing/burning
ok
So I clicked ok and took the dvd to try and play it in a DVD player, obviously it wouldnt work so I quit iDVD and restarted my mac. I tried the process agian with another DVD and after 10 hours, same message and same result. So I went to the store and got sony DVDs (I was using memorex ones), but still, even with sony's DVDs I go tht esame message.
PLEASE HELP ME
imac G4 Mac OS X (10.4.10) 800 MHz PowerPC G4, 512 MB SDRAM

I'm glad to be here.
However this doesn't help. When I click on the link
and error message appears.
Today is very frustrating
Yikes! I surely didn't mean to add to your aggravations today!
Try this:
http://discussions.apple.com/thread.jspa?messageID=4664212&#4664212
:)Sue

Error Invalid field format (screen error) in module pool

Hi
experts i am doing module in whichi had many check boxes on screen and each check box has function code means i want to do some thing else . but as i click the first or any other check box i get a error message
INVALID FIELD FORMAT (SCREEN ERROR).
Can anyody help me with this asnwers will be rewarded points .
regards

Dear Farukh,
can you please let me know how have you declared you check boxes.
how did you handle the click or the function codes in the user command module in your PAI.
The declaration of your fucntion codes can be done when you create your screen fields and then they need to be handled in the user command module i.e what you want to do when suppose you click on that particular check box.
Thanks
venugopal

Waveburner stuck during burn

I've been getting stuck in Waveburner whenever I try to burn a CD. I'm able to edit my fades and get the songs ready for a final burn. However, after clicking on the burn and inserting a CD, all that happens is the window opens to display the burn process, and all it does is make a tiny initial move to indicate it's started burning; the time indicator tells how long the burn will take - then nothing; I have to cancel the burn and eject the CD via iTunes.
Any suggestions would be great.
Thanks,
Randall

Randall, I also posted this reply to another gentlemen's thread that addressed the same issue. Here's the copy/paste response I lifted from that thread and wanted to share with the community.
Here we go with what worked for me (finally). I may post this as a standalone "solution," too, albeit quite technical. I will add the caveat here that I just switched to the Mac in Sep 05, so some of the terms I use may not be Mac-speak.
First, here's the present config of my DAW (digital audio workstation) that I went in with to tackle the Waveburner "freezing while burning" issue populating several streams in the forum:
- H/W, S/W: G5 Dual, 2.3GHz, 2.5GBytes RAM, OS 10.4.4, Logic Pro 7.1.1, Waveburner v1.1.2 (I reinstalled the v1.1.2 release), Pro Apps v3.1 (I reinstalled this guy, too)
- Soundcard: Presonus Firepod, but not turned on (For no particular reason, I kept the Firepod turned off during all of the below troubleshooting events. This may/may not contribute to burn problems and I'll try to add some more info regarding this configuration in a later posting.)
- DVD Burner: Pioneer DVD-RW DVR-109 (this was the stock burner in my G5), using CD-R media from "Imation" and "Compucessory" and "Office Depot"
- the crossover cable between the G5 and my PC was left inactive/disabled
Second, I need to mention that I "repaired permissions" on my OS hard drive after the ProApp 3.1 and Waveburner 1.1.2 updates were reinstalled. I should mention I repaired permissions on the hard drive twice in the sense that I first repaired it by selecting the official hard drive name and then selected the personalized hard drive name (e.g., "Rich's Main Drive") within the Disk Utility application. This may not matter, but I was willing to try all options.
Third, I deleted the old Waveburner preferences file that is found in the Users/Library/Preferences folder or something like that since I'm going off of memory here to allow Waveburner to re-establish a new prefs file for itself.
Fourth, I accessed only the Waveburner application and did not open any other application first. Again, this probably won't impact anything, but I took a very conservative approach.
Fifth, let's talk about my Waveburner settings that worked and definitely did not work as of today. I'll need to double check if the OS 10.4.4 update includes the DVD burner driver or firmware updates (I'm unsure if the firmware needs to be activated separate from a simple OS update. Any ideas?). So, here are the settings I used in the Waveburner preferences with comments:
- selected "built-in audio", "channels 1-2" (still need to verify the Firepod would work, too)
- "no dithering" was selected
- burn tab: all items left unchecked (When I selected "CD Text," the burn definitely froze immediately following the mix bounce and I'm not sure if that is burner related or S/W related. Either way, trying to include "CD text" was not successful.)
- "replace region with bounce" checked (when left unchecked, the burn froze after the bounce)
- slowest burn speed selected (4x) to try and miminize burn errors (of course, I'm going to try and increase the burn speed now that I have a stable config working)
- I initially selected "test burn" prior to actually burning. This obviously added extra time to the effort, but was worth it for troubleshooting purposes. In the end, my stable config does not include this step anymore, so I just burn outright without a test burn, now.
- selected the "ballad" mix plug-in chain preset
So, the above settings seemed to be the bare bones settings to start with. Unfortuneately, I trashed multiple disks to get to this point. I'm anxious to see what settings I can add before I have a total freeze again.
Sixth, I need to mention that I imported four pre-dithered, pre-mastered, 16 bit, 44KHz aiff files totaling just over 20 minutes of audio (I also cross-faded them and freely adjusted the track start markers). I realize for better audio, you'd want to import 24 bit, 48KHz files or greater, but remember I'm just trying to troubleshoot right now. I also realized that essentially re-mastering the tracks by including Waveburner's "ballad" plug-in preset would potentially create a mix that was too "hot," but I merely wanted to see if plug-ins were the culprit. It turned out the plug-ins did increase the mix's temperature quite a bit, but the plug-ins did not freeze the burn process.
Lastly, I found that patience, as always, was the key in the following areas:
- After the bounce, the burn did not start until ~45 seconds once the burn status window popped up that shows the time remaining until completion. This delay may decrease or increase based on the overall length of the CD you're trying to burn, but I haven't tested that yet.
- Once the final track was burned and the status window displayed "closing session," the burn process took an additional ~20 to 30 seconds until the disk was automatically ejected.
Give these rather comprehensive ideas a shot and then work your way up from there.
Good luck and I'll keep checking the posts to see if additional questions arise.
Rich

BI Publisher Word Template The report does not contain any data fields.

I have OBIEE BI Publisher report (10.3.4) working fine using BIP but using MS Word 2003 I want to create new template and want to add charts etc.
Step 1. In MS Word I successfully login Oracle BI Publisher as Administrator
2. Oracle BI Publisher -> Open (I open the report)
3. Go to Insert -> Table Wizard
I get this error:
The report does not contain any data fields. Please make sure that the reports generates data with the default settings or provide a valid XML file.
Please help

Hi
How do I load XML data? Also why XML data load is required? Do I have to export XML data from BIP View screen and load from the same file from the word?
Please clarify
Thanks

Cannot edit wiki pages-- Exception message: Invalid field name

We have migrated from one Sharepoint 2010 environment to another Sharepoint 2010 environment and only wanted to preserve a few sites, mostly Enterprise Wiki Sites.
We have imported 5 total Enterprise Wiki Sites, all of which point to particular Term Sets in Managed Metadata.
2 wikis are pointed to term set A, 2 wikis are pointed to term set B and one wiki is pointed to term set C.
One of the wikis pointed to term set A is working, and one is not
The malfunctioning wiki has the following symptom:
Whenever you try to edit a page (new or existing) and save your changes, regardless of whether it is tagged, you cannot save your changes. When you try, you get the error below.
Error
Failed to get value of the "Wiki Categories" column from the "Managed Metadata" field type control. See details in log. Exception message: Invalid field name. {f863c21f-5fdb-4a91-bb0c-5ae889190dd8}
https://sharepoint.domain.com/wiki/adminwiki /wiki/adminwiki/Pages.
Troubleshoot issues with Microsoft SharePoint Foundation.
Correlation ID: 4188c150-de8f-4940-9dbd-54939f117bfe
Date and Time: 3/12/2012 4:26:09 PM
Go back to site
To me, it looks like there is an invalid URL, since it gives the URL path, and then there is a space, and then it also has a relative URL to /wiki/adminwiki/pages ...is this normal?
Any ideas on how to fix this is great. I don't think it has anything to do with the Managed Metadata service or the Term Store since the other wiki site (pointing to the same exact Term Set) is working normally with no problems.

To solve the problem make sure that the template you are using for the current page (with errors) has the same content type as the page. In example of the Enterprise Wiki page, I forgot to set the content type to an Enterprise Wiki page on a custom page
template I just added to the Master pages.
So what I had to do is:
go to properties of the page with errors described above and set it to be
Enterprise Wiki page
go to master pages and set the custom template to be of the same type, Enterprise Wiki page
That solved the problem

Why does the Mail.app CC: field puts me first on the CC: list although I was not ?

Why does the Mail.app CC: field always rearranges the list so I am first on the CC: list although the sender intentionally did not ?
I did not see how and where to de-activate this unnecessary intrusion in the company's communication codes.
iOS on my iphone, correctly leaves my name where it is in the CC: list.

Hi starbux48,
Yahoo! partnered with Apple to allow an IMAP style offering on the iPhone, free of charge for their users. However that feature is only available if you use the iPhone. If you want IMAP/POP access on computers then you'd need to upgrade to the Plus level account.

Why does the keyboard cover text fields ios 8

Why does the keyboard cover text fields in safari in ios 8 in safari? I've never had this problem before, but now when a text field is near the bottom of the page, I can't move it above the keyboard. If there any fix? This is extremely annoying and renders filling in text on many web pages impossible.

This solved it for me. I only needed to split it once before it was fixed (but shouldn't have had to do it at all). Thanks, chuck9999, you're my hero!
Level 1(0 points)chuck9999Oct 19, 2014 8:15 AM Re: Why does the keyboard cover text fields ios 8
Re: Why does the keyboard cover text fields ios 8in response to TeraBI had the exact same problem on my iPad Air and it's working fine now. Try toggling your keyboard a few times between split and regular using the keyboard key in the lower right corner. I also then docked the keyboard a few times. The turned-off/rebooted the iPad and it's worked fine ever since. I stumbled upon the fix reading another post, and it did work although not sure why. My guess is toggling the keyboard and rebooting updated something in the "registry".
Liked Show 1 Like(1)
Reply

Field ZZBUDAT is delta-relevant, but does not exist in the field list

Hi All,
I have created a Generic DataSource on a View.Now there is a situation ,i need to add a Date field form some other table.
So i have enhanced the datasource now that date is coming in my datasource.
But when i tried to make delta on that date field its showing error-
Field ZZBUDAT is delta-relevant, but does not exist in the field list
Message no. R8279
Diagnosis
The DataSource uses field ZZBUDAT for specifying the delta. In the DataSource field list, however, the field does not occur
Now how i can make this field dalta relevant?
Thanks,
Piyush

Piyush,
I think the message in SAP is quite clear....
If the field ZZBUDAT does not exist in the view ... how do you expect the datasource to know which records have changed...?
The delta relevant field SHOULD be in the view - else there is no way the extractor can identify the changed records ...
Please remember that the Generic extractor is a simple select statement with a where clause on the delta relevant field and nothing else ... if you want the changed on field to come from another table - then you need to write a function module extractor to do this...
The order of processing is that - the view fields are processed first - then the enhanced fields are processed followed by the user exits...

Idvd does not burn dvd

idvd does not burn project to dvd

You're going to give us a lot more information that that.
What version of iDVD do you have?
What happens when you try to burn the iDVD project?
Any messages or warnings?
What type of content do you have, i.e. movies, photos for slideshows?
What brand of DVD disk are your using?
If you get to the point of starting a burn what speed do you select.
OT

My iDVD does not burn the movie. It ejects DVD before finishing burning.

My iDVD does not burn movie on DVD. It ejects the the DVD before the burning is finished! Does anyone know what the problem is?

Try cleaning the Superdrive and performing a SMC reset:
Resetting the SMC (System Management Controller) on Intel-based Macs:
http://support.apple.com/kb/ht3964 and
http://support.apple.com/kb/HT1237?viewlocale=en_US
Resetting your Mac's PRAM and NVRAM:
http://support.apple.com/kb/ht1379
If you are using a Wireless Keyboard:
http://support.apple.com/kb/TS3273
Then reboot your Mac and try again.

What does "Error-2041: an invalid sample description was found in the movie"means?

what does "Error-2041: an invalid sample description was found in the movie"means?

I have the exact same problem. I have a PPC 6700, and now I can't view movies I created with it in mp4. If change extension file to 3GP video works just fine.
Also, when I try to see a webpage with a Quicktime video clip, I only get a Quicktime logo with a big question mark in it, but no play.
I tried uninstalling and reinstalling, but nothing seems to work.
I have Windows XP, and it worked fine until a couple weeks ago. Not sure if when upgrading to Quicktime 7.2, though.

Valdiation rule does not work on PrimaryBillToCity field

Hello to everyone,
Valdiation rule does not work on PrimaryBillToCity field (and other address fields)
Have someone a workaround ?
Thanks.
ML

I do not believe it is possible to do validation on the address fields in the address block.

WaveBurner does't burn CD (Invalid field in CDB)

Similar Messages

Maybe you are looking for