Waveburner: Freezes at import file command.

I have opened a new Waveburner session. When I click import on the interface, either on the main interface or in the region list, or when I click import audio in the file menu, the program freezes, spinning beach ball and everything.
Anyone know what's up?

You shoul try to do one by one (dataobjects and then reports and the eds and so on).
This link may help you with the rigth command to use: http://download.oracle.com/docs/cd/E12839_01/integration.1111/e10224/bam_app_icommand.htm#BABFAAGA
I had the same problem and solved it exporting and importing eache on by time.

Similar Messages

Clean Re-install? Keeps Freezing when importing files.

Hope someone can help...I can't stop my photoshop from searching for files to import. No matter what I do it freezes on the importing files and never moves...I am beyond frustrated to the point i have uninstalled and reinstalled to see if I can get it to stop by it keeps starting with that Can I completely delete and re-install clean and re-program where to get files? I think I moved files without doing it through Adobe and it hasn't been the same since but i thought my external drive was dying.

You will need to turn off Watch folder service. Please follow these steps-
On desktop press 'CTRL+R' key to open 'Run' dialog'. Type 'services.msc' and hit enter
Check for 'Adobe Active File Monitor v9' and right click it > choose Stop.
Thanks
Andaleeb

Motion locks up / freezes when importing files

Motion opens fine and opens existing files fine and from what I can tell performs fine with existing projects. But now, I cannot import anything, to begin a new project or to import assets, Motion just locks up. Occasionally when I restart, it will work but not all the time. This was also happening with FCP but has not happened recently.
Any ideas?

You might want to post that here.
N

Import files from usb impossible?

I tried to import a .mov file from usb. by using the import file-command in FCPX. Impossible; the clip is empty with red warningsign. I must first via finder import into the map "film" ("movie") and from there import it (by using the importfile-command in FCPX) in the event and than it works.
For audio almost the same; first import in iTunes and from there into FCPX using the FCP-importcomand. I think this is wrong.
Any idea about the reason?

Is it possible you unchecked Copy files to Final Cut Events folder-in your Import Preferences?
Because if that's unchecked, then FCP X will go looking for your USB stick to play that file back. And if it's no longer attached to your computer, it will appear as offline- which is what that warning is.
I have no trouble importing footage from USB into FCP X that I then eject- as long as it's copied over on Import. Remember- "Import" is just FCP X getting pointed to your media. If you don't check, Copy files, the media doesn't move from its original import location and when that location is no longer visible to FCP X- i.e. on a drive that gets ejected- it will appear offline which is probably what happened here.
Though personally I wouldn't suggest ingesting directly from a USB stick but rather copying the contents from the stick to your hard drive first and then pointing it to FCP X- for improved performance.

Using ?import:file? command in a linux Enterprise server

Hello.
I'm with a problem with a template. I never had a client that use linux as OS in enterprise server.
I work with embedded bi publisher in JDEDWARDS and usually i use this command to call dinamic footers and never had a problem. For example
<?import:file:///\\10.153.2.86\BIP\R5543501\footerlastpage.rtf?>. This customer is in linux and dont know nothing about linux but i think that the problem is in this command because linux dont use " \\ " to perform this command \\10.153.2.86\BIP\R5543501\footerlastpage.rtf.
Someone know how i can solve this problem? i tried something like this ( <?import:file://///10.153.2.86\BIP\R5543501\footerlastpage.rtf?>) but still not working and cant find much information in internet about this.
Any help is appreciated
Tks in Adavance
Paulo Duarte

Hi Paulo,
You can import subtemplates this way:
<?import:http://myservername/subtemplates.rtf?> (access over HTTP)
or
<?import:file:///mydirectory/subtemplates.rtf?> (access over File System)
(Notice: http uses two forward slashes // and file uses three /// )
So in your case try this: <?import:file:///10.153.2.86/BIP/R5543501/footerlastpage.rtf?>
Another thing to make sure is set is this:
1) http://www.oracle.com/webfolder/technetwork/de/community/bip/tipps/Subtemplates/image01.png
2) http://www.oracle.com/webfolder/technetwork/de/community/bip/tipps/Subtemplates/image02.png
References:
BI Publisher Subtemplates:
http://www.oracle.com/technetwork/middleware/bi-publisher/overview/bip-subtemplate-1-132933.pdf
Cheers
Jorge
ps. If this answers your question then please grant the points and close the thread

ITunes freezes when importing music from CD and also when playing,

Just recently iTunes has started to freeze when importing music from a CD - it just stops and the progress bar remains as it it. The whole mac then freezes and I get the spinning beachball. I can't use any other application. The same thing is happening when I play music - it's ok for a song or two and then freeze and the beachball appears. I've downloaded iTunes again and reinstalled and it's just the same. Using Safari and Mail etc is no problem at the moment.
I also have a problem getting the iMac to recognise external hard drives - it won't show them on either firewire 400 or 800. I can see my 1TB drive using usb ( it shows up on the desktop, whereas on firewire it doesn't do this) but if I try to open it and see the contents in finder, it opens, but doesn't dispaly the contents of the drive. I can see the disk size but just get a grey spinning wheel in the bottom right hand of the finder window. Timemachine does not work.

I have had the same problem & itunes crashes when i try to import a file. Now i can't even start itune. I've reinstalled itunes so many times, without a fix, I've lost count.
I did post and had no reply. I'll watch this post with interest.

B2B SelfService Error creating Trading Partner .zip import file using ant

SOA 11g 11.1.1.5 B2B - We are trying to create an import file for out trading partners into SOA B2B 11g but are getting errors when we run the ant script to build the import zip file.
We ran the ant-b2b-util to get the b2bselfservice.xsd file, loaded that into jDev to show the selfservice.xml structure.
We have built a trading partner xml file and at this point have stripped it down to one TP just to see if we could get it to work and we keep getting the same error messages.
From the $SOA_ORACLE_HOME/bin directory (where we have placed our TP xml file: TPD_NA.xml) here is the command and results from running the ant script:
[oracle@nalinoap05 bin]$ ant -f ant-b2b-util.xml b2bselfservice -Dinput=$ORACLE_HOME/bin/TPD_NA.xml -Doutput=$ORACLE_HOME/bin/TP_Docs.zip
Buildfile: ant-b2b-util.xml
b2bselfservice:
weblogic_dependencies:
[echo]
[echo] Weblogic server location: /oracle/SOAWDEV/11.1.1.5/Oracle/Middleware/wlserver_10.3
[echo] JNDI properties folder location: /oracle/SOAWDEV/11.1.1.5/Oracle/Middleware/Oracle_SOAWDEV/bin
[echo]
verifyargs:
utility:
[echo]
[echo] java.naming.provider.url=${java.naming.provider.url}
[echo] java.naming.factory.initial=${java.naming.factory.initial}
[echo] java.naming.security.principal=${java.naming.security.principal}
[echo] java.naming.security.credentials=*****
[echo]
[echo]
[echo] args=selfservice
[echo]
[java] Commandline arguments 1: [selfservice]
[java] 2012.04.10 at 13:27:35:559: main: (INFO) Input file location(s) :[oracle/SOAWDEV/11.1.1.5/Oracle/Middleware/Oracle_SOAWDEV/bin/TPD_NA.xml]
[java] 2012.04.10 at 13:27:35:559: main: (INFO) Output file location :/oracle/SOAWDEV/11.1.1.5/Oracle/Middleware/Oracle_SOAWDEV/bin/TP_Docs.zip
[java] 2012.04.10 at 13:27:35:596: main: (INFO) TradingPartner created :/soa/b2b/tp_id1AC191488133.xml
[java] 2012.04.10 at 13:27:35:600: main: (SEVERE) TPD_NA.xml: Combination of Documentprotocol=EDI_X12 docVersion=4010VICS docType=852 docDef=852Def not found in doc_*.xml file
[java] 2012.04.10 at 13:27:35:600: main: (SEVERE) TPD_NA.xml: Combination of Documentprotocol=EDI_X12 docVersion=4010 docType=997 docDef=997Def not found in doc_*.xml file
[java] 2012.04.10 at 13:27:35:600: main: (SEVERE) TPD_NA.xml: Combination of Documentprotocol=EDI_X12 docVersion=5010 docType=850 docDef=850Def not found in doc_*.xml file
[java] 2012.04.10 at 13:27:35:601: main: (SEVERE) TPD_NA.xml: Combination of Documentprotocol=EDI_X12 docVersion=5010 docType=860 docDef=860Def not found in doc_*.xml file
[java] 2012.04.10 at 13:27:35:601: main: (SEVERE) TPD_NA.xml: Combination of Documentprotocol=EDI_X12 docVersion=4010VICS docType=864 docDef=864Def not found in doc_*.xml file
[java] 2012.04.10 at 13:27:35:601: main: (SEVERE) TPD_NA.xml: Combination of Documentprotocol=EDI_X12 docVersion=5010 docType=864 docDef=864Def not found in doc_*.xml file
[java] 2012.04.10 at 13:27:35:601: main: (SEVERE) TPD_NA.xml: Combination of Documentprotocol=EDI_X12 docVersion=5010 docType=997 docDef=997Def not found in doc_*.xml file
[java] 2012.04.10 at 13:27:35:602: main: (SEVERE) TPD_NA.xml: Combination of Documentprotocol=EDI_X12 docVersion=5010 docType=856 docDef=856Def not found in doc_*.xml file
[java] 2012.04.10 at 13:27:35:602: main: (SEVERE) TPD_NA.xml: Combination of Documentprotocol=EDI_X12 docVersion=5010 docType=810 docDef=810Def not found in doc_*.xml file
[java] 2012.04.10 at 13:27:35:691: main: (SEVERE) TPD_NA.xml: Error in Validation:
[java] [org.xml.sax.SAXParseException: XML-24536: (Error) Missing Attribute 'documentDefinitionRef',
               org.xml.sax.SAXParseException: XML-24536: (Error) Missing Attribute 'documentDefinitionRef',
               org.xml.sax.SAXParseException: XML-24536: (Error) Missing Attribute 'documentDefinitionRef',
               org.xml.sax.SAXParseException: XML-24536: (Error) Missing Attribute 'documentDefinitionRef',
               org.xml.sax.SAXParseException: XML-24536: (Error) Missing Attribute 'documentDefinitionRef',
               org.xml.sax.SAXParseException: XML-24536: (Error) Missing Attribute 'documentDefinitionRef',
               org.xml.sax.SAXParseException: XML-24536: (Error) Missing Attribute 'documentDefinitionRef',
               org.xml.sax.SAXParseException: XML-24536: (Error) Missing Attribute 'documentDefinitionRef',
               org.xml.sax.SAXParseException: XML-24536: (Error) Missing Attribute 'documentDefinitionRef']
[java] Java Result: 255
BUILD SUCCESSFUL
Total time: 1 second
Here is the contents of TPD_NA.xml:
<?xml version="1.0" encoding="UTF-8"?>
<SelfService xmlns="http://xmlns.oracle.com/integration/b2b/selfservice/profile">
<TradingPartners>
<TradingPartner hosted="false" name="OvvvvvvvX" >
<Identification name="EDI Interchange ID" value="18xxxxxxxxxX" />
<Identification name="EDI Interchange ID Qualifier" value="14" />
<Identification name="DUNS" value="18xxxxxxxxxX" />
<Identification name="Generic Identifier" value="18xxxxxxxxxX" />
<Identification name="AS2 Identifier" value="18xxxxxxxxxX" />
<SupportedDocumentDefinition initiator="true" docTypeName="852" docProtocolVersion="4010VICS" docProtocolName="EDI_X12" docDefName="852Def" />
<SupportedDocumentDefinition initiator="true" docTypeName="997" docProtocolVersion="4010" docProtocolName="EDI_X12" docDefName="997Def" />
<SupportedDocumentDefinition initiator="true" docTypeName="850" docProtocolVersion="5010" docProtocolName="EDI_X12" docDefName="850Def" />
<SupportedDocumentDefinition initiator="true" docTypeName="860" docProtocolVersion="5010" docProtocolName="EDI_X12" docDefName="860Def" />
<SupportedDocumentDefinition initiator="true" docTypeName="864" docProtocolVersion="4010VICS" docProtocolName="EDI_X12" docDefName="864Def" />
<SupportedDocumentDefinition initiator="true" docTypeName="864" docProtocolVersion="5010" docProtocolName="EDI_X12" docDefName="864Def" />
<SupportedDocumentDefinition initiator="true" docTypeName="997" docProtocolVersion="5010" docProtocolName="EDI_X12" docDefName="997Def" />
<SupportedDocumentDefinition initiator="false" docTypeName="856" docProtocolVersion="5010" docProtocolName="EDI_X12" docDefName="856Def" />
<SupportedDocumentDefinition initiator="false" docTypeName="810" docProtocolVersion="5010" docProtocolName="EDI_X12" docDefName="810Def" />
</TradingPartner>
</TradingPartners>
</SelfService>
We have exported our metadata and looked at the doc_EDI_X12.xml file and ALL of these referenced documents exist in that file and can be seen by going to Administration --> Document and under the Document Protocols navigation --> EDI_X12 --> 5010 --> 810 --> 810Def (as an example).
If we strip out all of the SupportedDocumentDefiinition lines then the ant script will build an import file with just the trading partners and Identifications.
What are we doing incorrectly or what is not working properly to get the ant script to build the import zip file??
Thanks for any assistance,
Ken

Does that mean we have to create all of the document type definitions in the selfservice file?
We have created (installed) all of the document types by installing them from the B2B Administration --> Document page.
The definitions in the Trading Partner xml file exactly match the definitions of the installed documents.
In the selfservice.xsd the <element> SelfService shows the profile:DocumentProtocols as minOccurs as 0 :
     <element name="SelfService">
          <complexType>
               <sequence>
                    <element minOccurs="0" maxOccurs="1"
                         ref="profile:DocumentProtocols" />
                    <element minOccurs="0" maxOccurs="1"
                         ref="profile:TradingPartners" />
                    <element minOccurs="0" maxOccurs="1"
                         ref="profile:Agreements" />
               </sequence>
               <attribute name="version" type="profile:non-empty-string"
                    use="optional" />
          </complexType>
     </element>
so we thought that since the documents had already been defined (created/installed) to B2B they would not have to be redefined in the selfservice xml.
If we have to define all of the document types in the selfservice xml file that we are using for the trading partners what are the minimum values that we need to include?
Could we use minimal definitions such as this:
<DocumentProtocols>
<DocumentProtocol name="EDI_X12">
<DocumentProtocolVersion name="4010">
<DocumentType name="850">
<DocumentDefinition name="850def" />
</DocumentType>
<DocumentType name="997">
<DocumentDefinition name="997def" />
</DocumentType>
</DocumentProtocolVersion>
</DocumentProtocol>
</DocumentProtocols>
before the <TradingPartners> section of the seflxervice xml file?
Thanks for your assistance!

MaxL - Import File from DB with &

Hi,
I have Essbase application with DB name contain "&". I'm running the next Command to import file:
import database WD.P&L data from server text data_file 'WD_Exp.txt' using server rules_file 'WD_Rev' on error write to 'C:\errorFile.err';
I get the following msg: " Syntax error near ['&']".
How Can I import the File to specific location without changing DB name???
Thanks in advance,

Have you tried this:
import database WD."P&L" data from server text data_file 'WD_Exp.txt' using server rules_file 'WD_Rev' on error write to 'C:\errorFile.err';
Just my preference here with the double quotes and double slashes:
import database WD."P&L" data from server text data_file "WD_Exp.txt" using server rules_file "WD_Rev" on error write to "C:\\errorFile.err" ;
Regards,
Cameron Lackpour

Can't import using Import Files...

Recent download of Aperture 3.1.1 from App Store. Can't get images into Aperture using File>Import>Files... (Command I or the Import arrow). Selecting Import generates file structure in the Browser pane, the "loading Assets" spins a bit, but no thumbnails appear in the Viewer pane. Thus, no images are presented for import selection. However, I can drag images into the Browser from the desktop or Finder window, but this is cumbersome I don't think that should be the only way to do it.

OKay, I have had the issue of images not being able to be directly imported into the Project/Album that Aperture says it will import them into, and it used to do this, but now doesn't, and it is very annoying and frustrating! Even after the images are imported into the general Photos section, they cannot be dragged and dropped into the Project/Album either, even though the tooltip that appears when I am doing so, as it is hovering over the Project/Album shows the correct number of images it will now have, opening up the Project/Album the image(s) aren't shown.
I tried the tip suggested here of dragging the Aperture folder from the Application Support folder to the desktop and reopening Aperture, but still does the same thing.
Where are you guys finding this in the Basic Troubleshooting? I have searched it, but not seeing any topic that documents this. And/or which .plst to delete?
Any help to get this back to how it was before, when be very appreciative, I mean it worked correctly before and images imported directly to the Project/Album without a hitch, just all of the sudden it stopped doing it, and encounter these issues.
Thank you again,
JPH

I imported files into organizer but when i try and open the folder no thumbnails open

I imported files from my sd card into organizer but when I click on the folder nothing opens in the window. I also imported all my files from iPhoto and can't find them either.

Make a temporary, backup copy of your library if you don't already have a backup of the library (Control-click on the library and select Duplicate from the contextual menu) and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #1, followed by #3 and then #4 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Import file read status

Hi
I need to import 9i export on 11g database. It is a huge export dump. I dont know the schemas in the dump. Hence I opted for read import file option in 11g Enterprise Manager. It has taken 2 hrs so far. Still it is reading. Is there a way to check the status (in percentage) of the reading?
This is what I see on the browser:
Database Instance: orcl >
Import: Processing: Read Import File
The import files are being read.
This may take several minutes. This page will automatically forward to the next page when done.
Please help me.

Pl identify exact versions of 11g and OS.
Use the SHOW parameter in the imp command line executable.
http://download.oracle.com/docs/cd/E11882_01/server.112/e16536/original_import.htm#i1021478
HTH
Srini

Freeze after import from built-in iSight

I go to File > Import from Camera..., record my lovely visage, and then I click Done. iMovie imports the new video just fine, I see it pop up in the little clips tray, but then I'm faced with a problem.
The capture window is still open and if I click the "Done" button or close the capture window, iMovie just freezes and I have to force quit.
When I re-open iMove, everything is fine, my project and the new clip still exist, but I've just wasted a lot of time.
It happens every time and it's really frustrating. What's going on?
Console offers little of interest...
3/28/08 12:51:43 AM iMovie[19101] CFDictionaryAddValue(): immutable collection 0x2630a390 given to mutating function
3/28/08 12:55:01 AM com.apple.launchd[169] ([0x0-0x38c38c].com.apple.iMovie7[19101]) Exited: Terminated
Message was edited by: Iynque

There are a few other threads out there based on iMovie freezing after importing, but most are people importing from other devices, not the built-in iSight camera. None has any good advice about how to correct it, that I can see.
I suppose the good news is it's not a problem endemic to the iSight camera capture option itself. I'm willing to bet it has something to do with disk fragmentation or dropped frames during capture -any of which a standard NLE would tell you about instead of crashing.
I guess the usual salvo of countermeasures are called for: verify the target volume using disk utility, defragment the drive, try building a new user account on your Mac and try the capture again (just to rule out any unruly preferences in your current config). Worst case, reinstall iMovie and see if it keeps happening. Now, having said all that, I haven't actually taken the time to try it myself. So, grain of salt, and all that.

How do you clear the Last Import file?

Every time I import new photos, previous imports are duplicated. And for every photo I import, a new import file is created. If I import 10 photos - one at a time - I end up with 10 folders, the last of which contains all 10 photos. I then have to manually delete the previous 9. I know there must be an easier way! And yes, I'm a new convert.

Sirc
Welcome to the Apple user to user assistance forums
Every time I import new photos, previous imports are duplicated.
Either delete the photos from your camera card (using the camera Format command is recommended) after importing or click the hide photos previously imported square in the import window
And for every photo I import, a new import file is created.
Please explain - you should not be looking at files within the iPhoto library - the only information that you should be using is that displayed by iPhoto - no file information is available or needed via iPhoto
If I import 10 photos - one at a time - I end up with 10 folders, the last of which contains all 10 photos.
Again importing does not create folders within iPhoto - folders can only be created by user action and folders do not contain photos - they contain other folders or albums
If you are looking with the finder - do not. There are no user serviceable parts in the iPhoto library.
I then have to manually delete the previous 9. I know there must be an easier way! And yes, I'm a new convert.
So you need to explain more clearly - I know that language can be a barrier but since we can not see anything exact, clear and detailed descriptions using standard English and iPhoto terms is very important - and do not use the finder to make any changes of any sort to the iPhoto library
LN
The last import is not a file - it is an album showing the photos last imported - albums do not duplicate photos - they point to them and take virtually no space

Sony File Commander really doesn't save files on sd card - they vanished after restart

Like in the subject. I've Sony Xperia Z3 dual sim version - 16GB + 64GB Kingston SD card. I was recording very important meeting with my phone. But after a few hours the internal space was full and I moved all of the recordings to my sd card using Sony File Commander. The files where there. But I have to restart my phone and I was so surprised that after doing that all of my files on sd card that I've moved using SFC where gone. I've lost very important stuff.
I'm using Sony Audio Recorder and this program can save recordings only to internal storage. There is no option in settings to change that. Please help! Sony, help!
Going back to factory settings, uninstalling software updates and cleaning data of SFC didn't solve the problem. All versions of SFC have this problem.

alexdon wrote:
I think this is something related to the microSD cards themselves. Have you tried others?
I'm using two Kingston 64 GB SD cards. The same issue is on my Sony Xperia Z3 Tablet Compact. When I remove my SD card and plug it directly through my SD/USB adapter to my computer I can easily cut and paste any files on it and there is no problem with them at all.

Freezes when adding files

all was perfectly well, until i hit the update button and got 7.5.
Now as soon as i try to add a file or a folder. Itunes freezes up and (though it still adds the files, about one album per two hours. And i get the "not responding" message if i try to do anything while its running.
this only happens when importing files to the library, everything else works.
ideas?

It is always a good idea to run a virus and spyware scan before starting troubleshooting to elimate malware as a cause.
There is an Apple article on troubleshooting freezes:
http://docs.info.apple.com/article.html?artnum=302856
First check to see if the problem is User-specific by opening iTunes in another account.
If the problem is system wide, try the section on "Conflicting Processes" first.

Waveburner: Freezes at import file command.

Similar Messages

Maybe you are looking for