Waveburner "hidden track" possible?

Hey folks.
Is it possible to have a song before track one, ? I thought it just was to drag the track marker into the audiofile (witch contains two songs), but it didn´t work the track marker is unmovable.
Hope you can help me, otherwise it might be a thing to add in next update.
I guess this topic has been discussed before, but I can´t find it (I´ve looked at the yahoo group too).
thanx.

Waveburner and other CD authoring apps have to stick to existing technical specifications (e.g. the existing 'red book' standard) when it comes to burning audio cd's.
Another example for this is the 2 seconds of pause before any audio starts. That also is part of these specs, and it is also not possible to burn a 'ghost track' BEFORE track one (which always has to be the first track per definition). Not very likely Apple are going to change this in another WB update.
What you could do instead is a hidden track AFTER any of the tracks - just make it one long audio file with some silence in between the signals and give it just one ID at the start. Hope this works for you.

Similar Messages

Import secret/hidden track

Hi guys, new here. I have the self-titled Blink 182 CD that has a hidden track between tracks 4 and 5. I'm trying to rip it, but it doesn't show up in iTunes. When I play it on my stereo, I can only listen to that track during the transition from track 4 to 5. While the hidden track is playing, the stereo counter display counts down to zero then starts counting up again when track 5 starts. Technically, I don't know whether it exists on its own or if is a part of either of the two tracks. I'd like to get the track any way I can, whether it's appended to the end of track 4, added to the beginning of track 5, or on its own. I would call an Apple Expert, but my iPhone is out of warranty, and I can't afford to pay $29 for one phone conversation that might end in someone telling me it's not possible. Thanks in advance to everyone who reads this post.

Use SoundTrack or try the Garageband forum
This forum is Final Cut Pro.

Importing hidden track 00

Does anyone know if it is possible to get iTunes to import the hidden track 00 on CDs?
In fact, is it even possible to get any computer to even play them in the first place?
Just to clarify; the hidden track 00 is the one that plays when you rewind track 01 on a normal CD player (ideally with some form of time counter display) and typically get a song that begins at, for example, -04:00.
For anyone who didn't know they existed, give it a go. A few examples:
2 Many DJs - As Heard on Radio Soulwax Pt. 2
Muse - Hullabalo
The Music - The Music (Special edition)
Rammstein - Reise Reise
Skunk Anansie - Stoosh
UNKLE - Psyence Fiction (Special edition)
I just wish I could have them in my iTunes library. It would, however, cause a problem filing them correctly, you probably can't have a track number 00 in the file info.
Cheers to anyone who can help.

No can do.
Really the only way to capture the audio is to interface a stand-alone CD player with your computer, manipulate the CD player to play the hidden track, and use audio capture software to record the audio onto your computer.

Hidden Track at Beginning of CD

Not sure if iTunes can do this, but do you all know of another Mac program that might?
I have a couple CDs with hidden tracks at the beginning of the CD, meaning I have to start the CD on track 1 and rewind, essentially going into negative time. It only seems to work on my home stereo, and I couldn't adjust the time in iTunes to be negative, so I doubt it's possible. Any help with ripping these tracks onto my computer would be greatly appreciated.
Thanks.

It might be noted that a lot of us try to refrain from putting in volume curves until we're all done recording/arranging and are into the mixing process. That way you don't have to worry about duplication and moving them. In Logic, you have the option to move automation along with the region, but I am not sure if you copy a region that the automation can also be copied. I haven't got that far, yet. But even so, unless it really needs to be there for a cue or something, I'd refrain until the mixdown.

Logic Control Selecting Hidden Tracks/ Don't Want That!

i'm mixing and i have alot of hidden tracks. i only want logic control to select tracks that are on the arrange page. is this possible?
thanks

Sorry but I've never come across a way of doing this (I use a different control surface but the software principles still apply). I don't believe Logic is flexible to report hidden tracks to the control surface interface and there's nothing about it in the Control Surfaces manual.
Quel dommage...
Pete

Itunes won't read hidden tracks and video!!!

so i bought the new justin timberlake cd, and i can't play the hidden track at the end of the cd. also, i can't get it so i can watch the video that is supposed to come with the cd or see the interactive booklet.
please help!!!!

I am also having the same problem with about 200 of my MP3s. The tag info shows up perfectly using QuickLook on Leopard, but in iTunes I can't see any of the info. I have tried converting the ID3 tag version, revesing the unicode....nothing.
Have you had any luck?

Hidden track problem

I have a CD with 2 tracks, one hidden. iTunes will only recognise the hidden track - any clues as to how to cure this? Thanks.

I didn't mean to yell. I am sorry. I was having trouble completing my question in the "new and improved" forum.
Great help guys. If I quantized real tight, select the kick drum (C1) erase duplicates, it worked fantastic. All I had to was lower the quantize % and I had a great track. Thanks again!!!

How can one find and remove hidden tracking software on an iphone

How can one find and remove hidden tracking software on an iphone

When folks did not know that it was there, they assume that it is hidden. Even the EU and the US congress got all up in arms about it.

Hidden track on CD

I know that this site has had topics like this before but I think my problem is a bit different. I recently ordered a CD (neveroddoreven) from the UK and recently received it. A real CD. There are a few "hidden tracks" on this CD. One of which is your standard ordinary hidden track. A song and then a minute of silence and then the hidden song. The other is a bit different and I'm having trouble taking just that song and listening to it on anything but a stereo. The song is located before the first track begins. The only way (that I Know if) to listen to it is to manually rewind at the beginning of the first track. Therefore it doesn't show up on itunes or my ipod. I'm trying to figure out how I can change that. I figured that audacity would work and I could find the song there and then cut it, but even audacity doesn't recognize it being before the beginning of the track. Any other alternative? It's a real pain listening to it on stereo and I can't take a stereo with me everywhere. Any help would be appreciated, thanks.

Ah thank you for the link. I went ahead and took the initiative to do some inquiries to what a "pregap" track was. To be honest, I didn't really know that there was terminology for all of this, so your post helped me out tremendously. As far as the EAC link you posted. The thread was fine, but I had to find out the download link itself on my own. Thanks once again, it now works just fine, I extracted the hidden song and it is now a separate track (jokingly, I named the track "00-cells" in honor of the fact that it is technically the zero'th track). Thanks once again!

Hidden Track Crashes Music App

I purchased an album on iTunes that contains a hidden track as the last track of the album. The hidden track will play when I play the album on my computer, and it burned onto a CD just fine. However, when I play the album on my iPhone (iPhone 5; 8.1.3, but problem was also happening with 8.1.2), the hidden track crashes the Music app. It will play the previous track all the way to the end, but then when it should go to the next (hidden) track, it does one of two things: 1) It will flip to the hidden track momentarily (but not play), then flip back to the track listing screen, then just stop playing and it doesn't proceed onto the first track of the next album for that artist; or 2) Instead of flipping to the hidden track the Music app will just crash and return back to the Home screen.
Syncing my phone with my computer does not solve. I have not deleted the album off my phone; should I delete and re-download?

I had this same problem with the Leonard Peikoff podcast. I noticed that if I downloaded the podcasts directly from my phone, I could listen to them just fine. However, when I sync'd them from iTunes, the iPod app would crash as soon as I tried to view the podcast under the podcast section.
What I did to resolve it was rename the files in iTunes. The files were named such as "Episode 025 – 8/11/2008" I just removed the " – 8/11/2008" part and now the files can be played.
I don't know for sure, but I think that this may have something to do with the iOS file system or something... Maybe the '/' or '-' character.
It's odd though since my brother seems to be able to play the same files just fine without renaming them (same phone). Others I know who listen also don't have this problem.
Hope this helps all.

Hidden Track

How do you seperate out a hidden track, or remove the annoying gap before the hidden track plays

Let's try that again.
Have a look at the inimitable b noir's User Tip: http://discussions.apple.com/thread.jspa?messageID=2331260&#2331260

Editing "Hidden" tracks from a CD

You know how some CDs have "hidden tracks? When you import them they come with minutes of silenece - can you devide them? and then delete the silence?
Help? Thanks!

You can't do it through iTunes. I think you're going to need some kind of program that splits audio tracks so you can divide that track into 2 parts. After that it would need to be imported into iTunes and from there to the iPod.
I don't have any experience of any such programs on Windows though.

ITunes can't play "hidden", Track 0

Anyone encountered this before?
- insert CD (http://www.discogs.com/release/393750) into computer
- itunes recognizes only 13 of the 14 songs
- all 14 songs, however, can be played in a car CD player, but somehow iTunes is not recognizing the Track 1
Is there any way to get iTunes to recognize the very first track - "Track 0" - so that I can rip it?!
Thanks!

hiya!
okay, first let's explicitly doublecheck your precise itunes version number. in itunes, go "help > about itunes" and wait for the version number to scroll up from the bottom of the screen. (for example, mine says "itunes 6.0.4.2")
if you've got an itunes version 5.0.0.35, 5.0.1.4, 6.0.0.18 or 6.0.1.3
... first let's check on this possibility:
iTunes for Windows: Audio files do not play in iTunes 5 or 6
if you've got an itunes version 6.0.2.23 or higher, or the compatibility settings thing wasn't a factor for you
... then first we'll try a careful standalone QT 7.1 reinstall.
download and save a copy of the QT 7.0.4 standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off antivirus and antispyware applications prior to the install.
Quicktime 7.1 Standalone Installer
if that install goes through okay, does your itunes play audio properly again?
(if you get an error message on the QT standalone reinstall, let us know what it says. include error message numbers if you're getting any.)
love, b

Turning off Midi Channel on an audio track-possible?

I do not want to receive any midi data (it is causing the track to mute) from my Moog Little Phatty on the corresponding audio track I am recording to in Logic. I do not want to filter this midi message out as I'd still like to be able to record that information on the corresponding midi track.
I know if I deselect the audio track it will no longer respond to midi messages being sent from the Moog. What I'd really like however is to stop Logic from muting a selected track whenever cc# 9 is transmitted.
Is this possible?

Aaron H wrote:
Jim Frazier wrote:
And, just curious... if you're recording the MIDI info anyhow, why not just record the MIDI track, and then export it to an audio file?
I like to capture the live performance of my external synths on an audio track. I record the midi information more as a back up/reference in case I want to tweak it later.
And I totally understand that. I guess I suggested it, as work around in the meantime.
Recording the MIDI, and then bouncing as audio, won't undermine the integrity of that approach, as long as you refrain from over-twaeking, BEFORE bouncing down the file!

Number of audio tracks possible? in logic

im trying to determine the number of possible audio tracks in logic....in my pulldown menue, there are only 24 possible...i imagine i can set this to a higher number?? any suggestions?
thanks

I think what you are looking for is in the Arrange window, Track->Create Multiple->Track Type: Audio. This should allow you to access the unlisted tracks from the Arrange view. Just add however many you need.

Waveburner "hidden track" possible?

Similar Messages

Maybe you are looking for