WaveBurner - invalid field in cdb

I have been using logic for years and have never had this problem with Waveburner. I went to burn a copy of a master, the only difference in it and earlier copies is I was adding the ISRC. When trying to burn I got this message:
"Disk drive didn't respond properly and cant recover or retry. Invalid field in CDB"
Any ideas on what the problem might be?
WaveBurner 1.6.1.(331.9)
Model Name:          MacBook Pro, Mac OS X (10.6.8)
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.66 GHz
L2 Cache:          6 MB
Memory:          4 GB
Bus Speed:          1.07 GHz
HL-DT-ST DVDRW GS21N:
Firmware Revision:          SA18
Interconnect:          ATAPI
Burn Support:          Yes (Apple Shipping Drive)
Cache:          2048 KB
Reads DVD:          Yes
CD-Write:          -R, -RW
DVD-Write:          -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies:          CD-TAO, CD-SAO, CD-Raw, DVD-DAO

+a lack of free space on my hard drive (10 GB unused).+
I don't know what the 'invalid field in cdb' is, but that amount of free space is not enough to run the app. You need to keep at least 25 GB free.
However, I researched that error message and it may indeed be some incompatibility with the drive.
Can you create a disk image file?
If so, then iDVD is not the problem. You can then probably burn to disk from the disk image file using Disk Utility or Toast.
Post back if this does not help.

Similar Messages

WaveBurner does't burn CD (Invalid field in CDB)

WaveBurner does't burn CD (Invalid field in CDB)

+a lack of free space on my hard drive (10 GB unused).+
I don't know what the 'invalid field in cdb' is, but that amount of free space is not enough to run the app. You need to keep at least 25 GB free.
However, I researched that error message and it may indeed be some incompatibility with the drive.
Can you create a disk image file?
If so, then iDVD is not the problem. You can then probably burn to disk from the disk image file using Disk Utility or Toast.
Post back if this does not help.

Daily Messages relating to (invalid field in cdb)

Hello all,
I am investigating a set of messages that occur at the same time every day. See excerpt below. They occur at 9:41 everyday and are shown in the oldest messages file which go as far back as May 1st. Is there anyway to find out what is causing these messages? The server is a Sun-Fire V440 running Solaris 9 with c1t0d0 and c1t1d0 hardware raided. I was not a part of the original setup so I do not have much details on how the initial configurations went. I have searched the net and found that the ASC:0x24 basically indicates an illegal request was sent to the device and is of no harm, but I want to know why they occur at the same time every day. Any help will be greatly appreciated. Thanks
May 29 09:41:15 servername scsi: [ID 107833 kern.warning] WARNING: /pci@1f,700000/scsi@2/sd@0,0 (sd1):
May 29 09:41:15 servername      Error for Command: inquiry Error Level: Informational
May 29 09:41:15 servername scsi: [ID 107833 kern.notice]      Requested Block: 0 Error Block: 0ear
May 29 09:41:15 servername scsi: [ID 107833 kern.notice]      Vendor: LSILOGIC Serial Number: LSI INTERNAL
May 29 09:41:15 servername scsi: [ID 107833 kern.notice]      Sense Key: Illegal Request
May 29 09:41:15 servername scsi: [ID 107833 kern.notice]      ASC: 0x24 (invalid field in cdb), ASCQ: 0x0, FRU: 0x0
May 30 09:41:16 servername scsi: [ID 107833 kern.warning] WARNING: /pci@1f,700000/scsi@2/sd@0,0 (sd1):
May 30 09:41:16 servername      Error for Command: inquiry Error Level: Informational
May 30 09:41:16 servername scsi: [ID 107833 kern.notice]      Requested Block: 0 Error Block: 0
May 30 09:41:16 servername scsi: [ID 107833 kern.notice]      Vendor: LSILOGIC Serial Number: LSI INTERNAL
May 30 09:41:16 servername scsi: [ID 107833 kern.notice]      Sense Key: Illegal Request
May 30 09:41:16 servername scsi: [ID 107833 kern.notice]      ASC: 0x24 (invalid field in cdb), ASCQ: 0x0, FRU: 0x0
May 31 09:41:16 servername scsi: [ID 107833 kern.warning] WARNING: /pci@1f,700000/scsi@2/sd@0,0 (sd1):
May 31 09:41:16 servername      Error for Command: inquiry Error Level: Informational
May 31 09:41:16 servername scsi: [ID 107833 kern.notice]      Requested Block: 0 Error Block: 0
May 31 09:41:16 servername scsi: [ID 107833 kern.notice]      Vendor: LSILOGIC Serial Number: LSI INTERNAL
May 31 09:41:16 servername scsi: [ID 107833 kern.notice]      Sense Key: Illegal Request
May 31 09:41:16 servername scsi: [ID 107833 kern.notice]      ASC: 0x24 (invalid field in cdb), ASCQ: 0x0, FRU: 0x0

Well from the old explorers I am inclined to think maybe its something else and not processes. Maybe what you said about the LSI card drivers sending bad values to the scsi drivers. From the old explorers also there was no iostat or vmstat or anything that looks suspicious in the process list. I am inclined to believe these messages existed since installation of the server.
Dec 26 15:05:06 servername scsi: [ID 107833 kern.warning] WARNING: /pci@1f,700000/scsi@2/sd@0,0 (sd1):
Dec 26 15:05:06 servername Error for Command: inquiry Error Level: Informational
Dec 26 15:05:06 servername scsi: [ID 107833 kern.notice] Requested Block: 0 Error Block: 0
Dec 26 15:05:06 servername scsi: [ID 107833 kern.notice] Vendor: LSILOGIC Serial Number: LSI INTERNAL
Dec 26 15:05:06 servername scsi: [ID 107833 kern.notice] Sense Key: Illegal Request
Dec 26 15:05:06 servername scsi: [ID 107833 kern.notice] ASC: 0x24 (invalid field in cdb), ASCQ: 0x0, FRU: 0x0
Dec 27 15:05:07 servername scsi: [ID 107833 kern.warning] WARNING: /pci@1f,700000/scsi@2/sd@0,0 (sd1):
Dec 27 15:05:07 servername Error for Command: inquiry Error Level: Informational
Dec 27 15:05:07 servername scsi: [ID 107833 kern.notice] Requested Block: 0 Error Block: 0
Dec 27 15:05:07 servername scsi: [ID 107833 kern.notice] Vendor: LSILOGIC Serial Number: LSI INTERNAL
Dec 27 15:05:07 servername scsi: [ID 107833 kern.notice] Sense Key: Illegal Request
Dec 27 15:05:07 servername scsi: [ID 107833 kern.notice] ASC: 0x24 (invalid field in cdb), ASCQ: 0x0, FRU: 0x0
Dec 28 15:05:06 servername scsi: [ID 107833 kern.warning] WARNING: /pci@1f,700000/scsi@2/sd@0,0 (sd1):
Dec 28 15:05:06 servername Error for Command: inquiry Error Level: Informational
Dec 28 15:05:06 servername scsi: [ID 107833 kern.notice] Requested Block: 0 Error Block: 0
Dec 28 15:05:06 servername scsi: [ID 107833 kern.notice] Vendor: LSILOGIC Serial Number: LSI INTERNAL
Dec 28 15:05:06 servername scsi: [ID 107833 kern.notice] Sense Key: Illegal Request
Dec 28 15:05:06 servername scsi: [ID 107833 kern.notice] ASC: 0x24 (invalid field in cdb), ASCQ: 0x0, FRU: 0x0

Cannot edit wiki pages-- Exception message: Invalid field name

We have migrated from one Sharepoint 2010 environment to another Sharepoint 2010 environment and only wanted to preserve a few sites, mostly Enterprise Wiki Sites.
We have imported 5 total Enterprise Wiki Sites, all of which point to particular Term Sets in Managed Metadata.
2 wikis are pointed to term set A, 2 wikis are pointed to term set B and one wiki is pointed to term set C.
One of the wikis pointed to term set A is working, and one is not
The malfunctioning wiki has the following symptom:
Whenever you try to edit a page (new or existing) and save your changes, regardless of whether it is tagged, you cannot save your changes. When you try, you get the error below.
Error
Failed to get value of the "Wiki Categories" column from the "Managed Metadata" field type control. See details in log. Exception message: Invalid field name. {f863c21f-5fdb-4a91-bb0c-5ae889190dd8}
https://sharepoint.domain.com/wiki/adminwiki /wiki/adminwiki/Pages.
Troubleshoot issues with Microsoft SharePoint Foundation.
Correlation ID: 4188c150-de8f-4940-9dbd-54939f117bfe
Date and Time: 3/12/2012 4:26:09 PM
Go back to site
To me, it looks like there is an invalid URL, since it gives the URL path, and then there is a space, and then it also has a relative URL to /wiki/adminwiki/pages ...is this normal?
Any ideas on how to fix this is great. I don't think it has anything to do with the Managed Metadata service or the Term Store since the other wiki site (pointing to the same exact Term Set) is working normally with no problems.

To solve the problem make sure that the template you are using for the current page (with errors) has the same content type as the page. In example of the Enterprise Wiki page, I forgot to set the content type to an Enterprise Wiki page on a custom page
template I just added to the Master pages.
So what I had to do is:
go to properties of the page with errors described above and set it to be
Enterprise Wiki page
go to master pages and set the custom template to be of the same type, Enterprise Wiki page
That solved the problem

Invalid field in parameter list. (0x26, 0x00)

I was archiving my old family videos and making a nice movie of them in final cut express. I exported them the same as I always do and created a menu using the reflections theme in iDVD. The movie was big so I adjusted the settings for DVD+R DL as I hae done before and clicked burn. I use and external Sony DVD Burner that is wonderful and has never given me any trouble.
After about ten hours I came back and there was an error message.
Burning Finished
Errors were found during the burning process
OK
When I clicked on the down arrow this appeared...
The recording device reported the illegal request: Invalid field in parameter list. (0x26, 0x00.)
So i clicked ok and this appeared...
Multiplexor Error
There was a problem during multiplexing/burning
ok
So I clicked ok and took the dvd to try and play it in a DVD player, obviously it wouldnt work so I quit iDVD and restarted my mac. I tried the process agian with another DVD and after 10 hours, same message and same result. So I went to the store and got sony DVDs (I was using memorex ones), but still, even with sony's DVDs I go tht esame message.
PLEASE HELP ME
imac G4 Mac OS X (10.4.10) 800 MHz PowerPC G4, 512 MB SDRAM

I'm glad to be here.
However this doesn't help. When I click on the link
and error message appears.
Today is very frustrating
Yikes! I surely didn't mean to add to your aggravations today!
Try this:
http://discussions.apple.com/thread.jspa?messageID=4664212&#4664212
:)Sue

Invalid field format (screen error) on Table Control

Hello,
When selecting a line or multiple lines on a screen made by me(using a Table Control), I get Invalid field format (screen error). Debugging the code it sends the message when looping the internal table on PAI to check if there were values changed. Is there a reason why this error appears on this?
loop at it_values.
    chain.
      field pvalues-BEGDA.
      module CHANGE_QUEUE.
    endchain.
endloop.
Thanks.

No need to loop to check whether data is changed after PBO, just check System Field SY-DATAR, it will be set to 'X' if any field was changed.
So the following code is enough;
IF SY-DATAR EQ 'X'.
   PERFORM SAVE_DATA.
ENDIF.
Regards
Karthik D

System.ArgumentException: Invalid field name. {c042a256-787d-4a6f-8a8a-cf6ab767f12d} while Activating Info path form Feature

We are encountering an error while activating features for info-path form on site collection.Earlier It was working fine but when we deactivate info path feature on site collection and try to activate again with updated info path form its giving below error.
Feature receiver assembly 'Microsoft.Office.InfoPath.Server, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c', class 'Microsoft.Office.InfoPath.Server.Administration.XsnFeatureReceiver', method 'FeatureActivated' for feature '86e128c1-8d91-9809-ac8a-7b77e8a2159b'
threw an exception: System.ArgumentException:Invalid field name. {c042a256-787d-4a6f-8a8a-cf6ab767f12d} at Site Collection url at Microsoft.SharePoint.SPFieldCollection.GetFieldById(Guid
fieldId, Boolean bThrowException) at Microsoft.SharePoint.SPFieldCollection.get_Item(Guid id) at Microsoft.Office.InfoPath.Server.Administration.XsnFeatureReceiver.UpdateContentType(SPContentType contentType, String serverRelativeUrl, FormTemplate formTemplate)
at Microsoft.Office.InfoPath.Server.Administration.XsnFeatureReceiver.CreateOrUpdateContentTypes(SPSite currentSite, String serverRelativeUrl, FormTemplate formTemplate) at Microsoft.Office.InfoPath.Server.Administration.XsnFeatureReceiver.FeatureActivated(SPFeatureReceiverProperties
properties) at Microsoft.SharePoint.SPFeature.DoActivationCallout(Boolean fActivate, Boolean fForce)

Hi Prathap singh.
Greetings . pls try to deactivate from powerhell and activate it again
http://social.technet.microsoft.com/Forums/office/en-US/e79ebe96-2b48-46e3-8cce-6caed44f0418/invalid-field-name-error-while-trying-to-deactivate-administrator-approved-infopath-form-template?forum=sharepointcustomizationprevious
http://social.technet.microsoft.com/Forums/office/en-US/ddb8b710-138a-4e26-bf46-65ebd0ac525f/i-get-the-invalid-field-name-when-trying-to-activate-feature-to-publish-infopath-form?forum=sharepointcustomizationlegacy
Please remember to click 'Mark as Answer' on the answer if it helps you

"Invalid Field Name" Error message on Client System

Hi all,
I have installed some addons on server, and the same is installed on client systems as well. on server everything works well. But when it comes to client systems, one particular form shows an error message, "Invalid Field Name", on loading the form.
I have the same .srf's as on server but still the problem persists. If anybody knows the cause of the problem, please let me know what could be the reason.
Regards,
Rohan S. Kamble.

Hi Rohan,
Are you sure you have the same version of DI (also addon) on your client and your server side?
Reinstall the addon on your client, check if the problem still happens.
Regards,
Jay.

Error in module program - Invalid field format( screen error )

In the module program i have added 1 input field named gv_pallet of 1 character. while processing the transaction when i put value 1 in this input field and press a button i am getting error ' Invalid field format( screen error ) .
I am not geting any clue whats the eror . can anyone able to tell me the error.
Point will be guranted .
Regards

No need to loop to check whether data is changed after PBO, just check System Field SY-DATAR, it will be set to 'X' if any field was changed.
So the following code is enough;
IF SY-DATAR EQ 'X'.
PERFORM SAVE_DATA.
ENDIF.
Regards
Karthik D

Error Invalid field format (screen error) in module pool

Hi
experts i am doing module in whichi had many check boxes on screen and each check box has function code means i want to do some thing else . but as i click the first or any other check box i get a error message
INVALID FIELD FORMAT (SCREEN ERROR).
Can anyody help me with this asnwers will be rewarded points .
regards

Dear Farukh,
can you please let me know how have you declared you check boxes.
how did you handle the click or the function codes in the user command module in your PAI.
The declaration of your fucntion codes can be done when you create your screen fields and then they need to be handled in the user command module i.e what you want to do when suppose you click on that particular check box.
Thanks
venugopal

Invalid field format (screen error)

We are using custom module pool report for displaying information. Information display in Table control which has also Radio button option for the further processing. After unicode conversion we are getting error while accessing the screen as "Invalid field format (screen error)" when user select Radio button. In production environment we are not facing any issue, but in Dev + Qas we have this issue. Nothing is changed as all environment are sync. To solve the issue we re-defined the Radion screen element, but no success we are still getting same error. I am not sure whether it is related to Page Format or something else. Could you please let me know whether anybody faced this issue ? For the information, I already searched on SDN and SNote, but there is no post or SNote

Have you checked if there are overlapping fields on the screen.
I've seen simular errors and usually it was beacuse of some change by SAP that made it so that the defined length of the screen field was suddenly to small.
I'm not saying that this is the case in your situation, but it never hurts to try and change the length of your screen field and see if that resolves the issue.
Arthur

Failing to export with Export-SPWeb - Invalid Field Name error

Hi,
I am trying to export a site collection and restore the site collection to a sub site. In order to do that I have used Export-SPWeb command to export the site collection. The command I used
Export-SPWeb -Identity http://SitecollectionURL/ -Path "F:\filename.bak" -IncludeUserSecurity -Compression 1024 -IncludeVersions 4
I got the below error,
Progress: Starting to process objects of type ContentType.
FatalError: Invalid field name. {c876558a-1cb9-4a87-bf55-ee69876f6b8b} http://sitecollectionURL/
Debug: at Microsoft.SharePoint.SPFieldCollection.GetFieldById(Guid fieldId, Boolean bThrowException)
at Microsoft.SharePoint.SPFieldLinkCollection.Load(XmlReader xrdr)
at Microsoft.SharePoint.SPFieldLinkCollection.EnsureLoaded()
at Microsoft.SharePoint.SPFieldLinkCollection.Save(XmlTextWriter xwtr)
at Microsoft.SharePoint.Deployment.ContentTypeSerializer.GetDataFromDataSet(Object obj, SerializationInfo info, StreamingContext context)
at Microsoft.SharePoint.Deployment.DeploymentSerializationSurrogate.GetObjectData(Object obj, SerializationInfo info, StreamingContext context)
at Microsoft.SharePoint.Deployment.XmlFormatter.SerializeObject(Object obj, ISerializationSurrogate surrogate, String elementName, Boolean bNeedEnvelope)
at Microsoft.SharePoint.Deployment.XmlFormatter.Serialize(Stream serializationStream, Object topLevelObject)
at Microsoft.SharePoint.Deployment.SPExport.SerializeObjects()
at Microsoft.SharePoint.Deployment.SPExport.Run()
I need assistance on this.
Thanks in advance
-Sasi

Hi Sasi,
Export-SPWeb is used to export a site, list, or library rather than a site collection. The Identity of the command should be a site.
Based on your description, my understanding is that you want to export a site and import it to aother site. Is it right?
I run your command using the URL of my site instead of the
http://SitecollectionURL/, everything worked well. Please re-run the command below:
Export-SPWeb -Identity <URL of your site> -Path "F:\filename.bak" -IncludeUserSecurity -Compression 1024 -IncludeVersions 4
In addition, please try to export the site via Central Administration->Backup and Restore->Export a site or list under Granular Backup, and select the site collection and the site, then click ‘Start Export’. If you want to import the exported
site to another site, you should use Import-SPWeb command.
About Export-SPWeb command:
http://technet.microsoft.com/en-us/library/ff607895(v=office.15).aspx
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Dialog Screen - Invalid field format (screen error)

Dear all,
I have developed a modal dialog screen and succesfully invoked it with CALL SCREEN command in the main screen. Unfortunately, it always returns "Invalid field format (screen error)" when clicking on the dialog's GUI control such as button or radio button. Anyone encountered this before??
Regards,
KK

Hi KK,
Just make sure that the fields take on the screen are also declared in the top module of your program.
And also match their data-types and size i.e., declared in top module and on the screen in their respective attributes.
Hope this solves your problem.
Thanks & Regards,
Tarun Gambhir

Search Help error : Invalid field format Screen error

Hi All,
I have attached a search help to contract field for contract no and item number. (in my own screen developed in a report)
The search help picks up data and assigns it to the fields,
But after this when I click on any other button, I get error saying :
<b>Invalid Field Format (Screen Error) !!!</b>
Any pointers guys !!!
Warm Regards,
Girish

screen checks in abapautomatically checks for format of field when u enter data....i.e date, integer etc...the problem in this case is that when u seelct a value using the help it is filling a value which is not the correct format...so check for the data types and test it again...this is definitely the problem.

Exception message, failed to get value, could not load managed metadata, invalid field name

Hi, i have created some site collection columns with managed metdata and taxonomy term sets. I have then created some site content types of those site columns. Some of them function properly and some don't.
When i have created or uploaded a document to the document library i start to "tag" the document by first choosing witch conent type i want too use, but when it comes to save the document it renders an error message(its not the full content
of the message):
"exception message, failed to get value, could not load managed metadata, invalid field name"
I have created some other site content types before and with the same site columns and they do not generate a error message. Is there a solution for my dilemma?

try these links:
https://prashobjp.wordpress.com/2014/02/14/failed-to-get-value-of-the-column-name-column-from-the-managed-metadata-field-type-control-see-details-in-log-exception-message-invalid-field-name-guid-site-url/
http://www.sharepointconfig.com/2011/03/issues-provisioning-sharepoint-2010-managed-metadata-fields/
http://blog.goobol.com/category/sharepoint/sharepoint-issue-troubleshooting/
http://www.instantquick.com/index.php/correctly-provisioning-managed-metadata-columns?c=elumenotion-blog-archive/random-whatnot
https://pholpar.wordpress.com/2010/03/03/taxonomy-issues/
Please mark answer as correct if it is correct else vote for it if you find it useful Happy SharePointing

WaveBurner - invalid field in cdb

Similar Messages

Maybe you are looking for