Waveburner resets (64bit) IK Multimedia plugins when stopping and starting

Does anyone else happen to have this problem:
I'm finding that while mastering, I want to look back at the incremental changes made and have found that the Pultec EQ and some other plugins seem to default to a preset.
In order to get to this problem I did the following:
1 track in Waveburner, added the Pultec EQ,
2 added a limiter chose a preset 'MIX PRESENCE' then got my desired sound.
3 When listening everything seems fine and then you stop and start again, or go back to the beginning of the track by pressing the 'BACK ONE TRACK' button on the transport and all of the sudden the Pultec EQ resets to that original preset.
So not too sure what to do, the only way of getting round this issue was to mix as best as I could, save as a new preset while it was playing and then when hitting start again then while it is playing then I quickly hit the preset on that I made and have to bounce my mix at the same time in order to finally get my desired output which is less than okay.
Can anybody help. I'm running on an iMac, 64bit Version10.6.7 OS and Waveburner is 1.6.1
Many thanks

It is not just IK Multimedia and Waves plugs that are resetting on me; it is also the WaveBurner 'native' plug "Linear Phase EQ" and who knows how many others, were I to begin testing instead of trying to work through this.
This little bug renders this software effectively useless for professional work.
Some of my Waves plugs hold their values, others don't.
Elysia products screwed up too; so much for that demo.
As far as I can tell I am not using any automation, but, is there a way to globally turn off the possibility of automation (I tried RightClicking in the mix lane but there is no choice of automation available there, perhaps 'cause there is none as I suspect)?
I am using WaveBurner 1.6.1.
C'mon Apple, its November already; you must fix this.

Similar Messages

defunct process when stop and start web server

Dear all,
I am using Sun One Web Server 6.1 SP6. When i try to stop and then start the web server. The <defunct> process is generated (his parent PID points to webservd).
The following is the result:
1st stop and start the web server (defunct process is generated)
2nd stop and start the web server (defunct process disappears)
3rd stop and start the web server(defunct process is generated)
4th stop and start the web server (defunct process disappears)
Here is my magnus.conf
ServerID www
ServerName www.abc.edu.hk
ErrorLog /i03_01/SUNWwbsvr616/https-www/logs/errors
PidLog /i03_01/SUNWwbsvr616/https-www/logs/pid
User nobody
DNS off
Security off
ClientLanguage en
AdminLanguage en
DefaultLanguage en
RqThrottle 512
StackSize 131072
Init fn="load-modules" funcs="caspreq,caspinit,casptrans" shlib="/i03_01/casp/module/sunos5_optimized/netscape_6.x/nes_casp2.so"
Init fn="caspinit" casplib="/i03_01/casp/asp-server-3078"
Init fn="load-modules" funcs="htaccess-init,htaccess-find" shlib="/i03_01/SUNWwbsvr616/plugins/htaccess/htaccess.so"
Init fn="htaccess-init"
Init access="/i03_01/SUNWwbsvr616/https-www/logs/access" format.access="%Ses->client.ip% - %Req->vars.auth-user% [%SYSDATE%] \"%Req->reqpb.clf-request%\" %Req->srvhdrs.clf-status% %Req->srvhdrs.content-length% \"%Req->headers.referer%\" \"%Req->headers.user-agent%\"" fn="flex-init"
Init fn="load-modules" shlib="/i03_01/SUNWwbsvr616/bin/https/lib/libj2eeplugin.so" shlib_flags="(global|now)"
TempDir /tmp/https-www-61c30017
# Load modules for PHP
Init fn="load-modules" funcs="php4_init,php4_execute,php4_auth_trans" shlib="/i03_01/SUNWwbsvr616/bin/libphp4.so"
Init fn="php4_init" LateInit="yes" errorString="Failed to initialize PHP!" [php_ini="/i03_01/SUNWwbsvr616/https-www/config/php.ini"]
# Enable statistics
Init fn="stats-init" update-interval="5" virtual-servers="100" profiling="yes"
any ideas? Thank

- which OS & version are you running into this issue ?
- By definition, defunct processes (or zombie processes) are processes that have exited prior to it's parent calling a wait() on it to get the return status .
- couple of things I can think of to narrow down the cause of this issue
1. disable ASP & php plugins and see if this still causes this issue
2. try starting the web server with log level to finest and see fi you get any useful information from the server error logs
hope this helps

Sometimes when listening to music or a podcast, it will stop and start in rapid fire. I have a 4th gen iPod Touch.

Sometimes when listening to music or a podcast, it will stop and start in rapid fire. I have a 4th gen iPod Touch. A Genius suggested something went wrong during the transfer from my MBP to my iPod, but I tried resyncing it, and it seems to happen haphazardly. Even if a podcast plays oddly one time, it might play perfect the next - so it can't have been the sync that went bad.

- First try a reset. Nothing will be lost.
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Next restore from backup
- The restore to factory defaults/new iPod

HT6058 I have updated my I pad dut I'm still having problems my iPad seems to freeze and when I go to put in my pin it take a few seconds before the numbers go in and my games stop and start and stop and start for a bit before they run properly

I have updated my I pad dut I'm still having problems my iPad seems to freeze and when I go to put in my pin it take a few seconds before the numbers go in and my games stop and start and stop and start for a bit before they run properly

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
 Cheers, Tom

Reset (stop and start) Apple Remote Desktop

Log in SSH to my xServe, I want to reset (stop and start) the Apple Remote Desktop service of the sharing system preferences of my server. I'm looking for a command: systempsetup -set...

kickstart can do this and much much more.
http://docs.info.apple.com/article.html?artnum=108030

Firefox4 on ubuntu, after awhile when I click on bookmarks and then move the cursor down to a bookmark, the list of bookmarks disappears. A stop and start of firefox4 fixes the problem but what is the long term fix?

I upgraded to 4 and I noticed that after 4 has been up for an hour or so I click on the bookmarks. I see my list of bookmarks below but when I move the cursor down to select one, the list disappears.
The only way I have found to fix this is to stop and start 4. I can then move the cursor down to select a bookmark. This problem has not occurred in previous versions.
ps.. no '''''delicious''''' installed

No, I see the three areas at the bottom of the Bookmark area that you refer to, but that also highlights an issue. When I want to save a story to my Reading List and click on Share then "Add to Reading List" then go back to look at what is stored in the Reading List, my recently-saved item is not there.
I looked thru the History tab and the Reading List tab and have been in the Bookmark tab. But even when I Save a Bookmark, that newly-saved Bookmark does not show up in the Bookmark area.
But then again, the next day (and actually just in the last half-hour) all of the functionality came back. When I look at the Bookmarks, suddenly, again, all of the Bookmarks that are on my Safari browser on my iMac are now there, and I can now Save a Bookmark.
It keeps coming in and out and that is what is driving me a little nuts.
Thanks.

HT2729 I bought a TV episode from iTunes (I have version 10 installed), but when I try to play it on my laptop, it keeps stopping and starting, with the voices out of sync with the action. The action is stop/start as well. What settings can I change to

I bought a TV episode from iTunes (I have version 10 installed), but when I try to play it on my laptop, it keeps stopping and starting, with the voices out of sync with the action. The action is stop/start as well., and occasionally it skips 5 or 10 seconds altogether, making it impossible to watch. What settings can I change to fix the problem.

Repair your QuickTime.
Control Panel > Programs n Features > highlight QuickTime and click CHANGE then REPAIR.

When I try to play the timeline stops and starts constantly.

Días de Hola Buenos
Que Desde él Instalado fcpx 10.1.1 CUANDO trato de Reproducir La Línea de Tiempo en sí detiene y Comienza constantemente.
Podria ayudarme?
gracias
saludos

Oops!! sorry I put it in Spanish, to translate back and bring it into English.
Since FCPX 10.1.1 install when trying to play any imported video just stops and starts constantly.
Could you please help me
thanks
regards

How come when I stop and start an audio clip before its done...

How come when I stop and start an audio clip when before its done, that when I play it it only plays part of the file?

I'm not sure if I got you right, but do you mean that it's like pausing...
I have never played an audio clip with java, but if this is the case, maybe you have to rewind the clip.
/J Lindroos

When I watch youtube videos, it always stop and start. Very annoying. Any good apps that we can use.

YouTube videos always stop and start . Is there an apps that we can download to stabilize the video.

Are you trying to watch YouTube from a web browser on iPad or from the YouTube app?
Should be running fine from the YouTube app on the iPad unless you have a slow connection.
Our family uses DSL (4-5 Mbps) and we stream video both with iPads, computers and TV with,mostly, no issues like buffering or data degradation/pixellation. It all depends on how much traffic there is on the Internet at any one specific time.
Heavy Internet traffic on different days at different hours of the day, from your ISP, can also be a factor in slowing down your Internet connection.

MacBook Pro hard disk stops and starts

Why does the hard disk on MacBook Pro stop and start every 15 minutes or so? All operations suddenly stop for five to ten seconds during the spin down. I don't recall this happening in OS 10.5. The preference "Put the hard disk to sleep when possible" is NOT ticked, therefore the drive should never spin down.
Any ideas?

Try resetting your SMC. Resetting the System Management Controller >>
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G + 120G OCZ Vertex 3 SSD Boot HD 

Communication Channel Stop and Start

Hello everyone,
We are using XI along with MQ for queing messages to our 3rd party logistics. Due to some issues happened in the past, it is decided to stop and restart the MQ channels every weekend. Now the problem is, when the MQ is down, some of the XI communication channels will go down, and will not start automatically, when the MQ bounces back. Now this had created a manual activity every weekend to stop and start all communication channels.
Question is, is there any way we can schedule it as a job to stop and start the channels, at a specific time ?

Hi!
It is possible in scheduling the messages in XI...
1. But before doing this make sure that at what time you want to be schedule ?
2. Is that time will be uniform for every week or else is it may varies ?
3. If Uniform please make schedule or else if it is varying note the difference between those timings I mean
     If your Messages are flowing for every Tuesday and also every Thursday...., etc..
4. You can schedule what ever may be the time it is suppose if those timings are varying weekly once a
     day but in that single day or next day if it was more than once..then better scheduling the
      communication channels to be start for and to be process for that particular 2 days and remaining days
      it wont work I mean stopping Cc
5. Now when come to process...in scheduling...
a) Click RWB>Component Monitoring>Communication Channel monitoiing
b) Right side u can check Availability TIme planning option click that..a seperate window will opens
    THere u can observe these options..
c) also u can see the log
I hope it will be useful to you...
Availability plan--> ONCE /DIALY / WEEKLY/ MONTHLY based on your req select any one...
Create: to create the scheduling...
change: to change the existing one
Save: to save
Reset if u want toreset alll
Delete and copy also as u know these..
While creating you can again see these options 3 main TABS
details: --> Corresponding details
CC: select ur chanel
OPTION 2
In XI 3.O you can directly do scheduling there after selecting the radio button of any Comunication channel and there adjacent to Audit log u can see availability time plan other than rt side top corder..
I hope it will be useful to u
Regards
Amar Srinivas Eli

Problem stop and start the ias 6.0

Hi all,
i have a problem when i stop and start the ias 6.0 sp2. The problem
apparent is that when i stop the ias the IAS web connector plugin stop,
then i start the ias and when i try to connect to a servlet in my ias
the page i find in my brwser tell me "The documento contained no
data.Try later again ..". Afte this i see that the IAS web plugin begin
to start and then the same connect to the servlet works.
Somebody can help me.
Thanks in advance.
Ignacio Ramos Garcia
Division TSO
Area de Telecomunicaciones
Tecsidel
C/ Enrique Jardiel Poncela, 6
28016 Madrid
Tel: (+34) 91 353 08 19
Fax: (+34) 91 353 08 81
<mailto:[email protected]>
www.tecsidel.es

Hi,
This really looks like a problem, kindly let me know the following...
- The O/S version & the web server with the service pack
- What method are you using to start & stop the application & web
server ?
- What application are you invoking to see this error ?
Regards
Raj
Ignacio Ramos Garcia wrote:
Hi all,
i have a problem when i stop and start the ias 6.0 sp2. The problem
apparent is that when i stop the ias the IAS web connector plugin stop,
then i start the ias and when i try to connect to a servlet in my ias
the page i find in my brwser tell me "The documento contained no
data.Try later again ..". Afte this i see that the IAS web plugin begin
to start and then the same connect to the servlet works.
Somebody can help me.
Thanks in advance.
Ignacio Ramos Garcia
Division TSO
Area de Telecomunicaciones
Tecsidel
C/ Enrique Jardiel Poncela, 6
28016 Madrid
Tel: (+34) 91 353 08 19
Fax: (+34) 91 353 08 81
<mailto:[email protected]>
www.tecsidel.es

The video action stop and starts momentarily at random

hi-
dell xps 8500 running windows 8.1. Purchased march 2013. 8 gb ram 1 tera bit hd. Amd radeon video card 1 gb ram, video card was tested by dell twice. Refreshed the whole computer, reinstall everything fresh. All drivers Bios updated. Playing a game: zuma revenge, the action stops and starts randomly. This is the reason why i went thru a complete refresh. Problem still exists. help please.
Phil

Hello,
Potentially unsafe versions of the Java plugin are "Click to Play" blocked, meaning that you have to click to activate Java for each site. See the [[How to enable Java if it's been blocked]] article for more information.
'''Note:''' To make sure that your Java plugin is working, you can visit the test pages listed in the article, [[Use the Java plugin to view interactive content on websites]]. If an "Activate Java" message box appears, click inside the box to activate the Java plugin.
When you see the "Activate Java" message box, simply click it to load the Java content normally.
 
[[Image:Fx24-JavaActivate]]
If there is no visible area to activate Java content in the page, click the red plugin icon in the address bar. In the message panel that opens, choose "Allow Now" to enable Java content temporarily.
 
[[Image:Fx24-JavaAllowNow]]
 
The next time you visit the site or any other that uses Java you will see this message again.
If you want to always activate Java for a particular site, you can use the "Allow and Remember" option shown above.
After activating Java, you may also see a "Security Warning" dialog box, asking you to confirm that you want to run Java. This warning comes from Java itself, not from Firefox.
Does this solve your problem? Let us know.

How may I automatically stop and start Mail services at a set time please

Hi folks. I was wondering if anyone could tell me how to automatically stop and start Mail services (or any other services) at a set time please in Leopard Server? Is there a script someone has created which might help?
Cheers, David ( a realy newbie when it comes to administering OS X server)

launchd works through a series of XML documents that define tasks to run, either at launch, on a time schedule, in response to network events, etc.
So you'll need to create two .plists - one to start the mail server and one to stop it. They should be saved in /Library/LaunchDaemons. I'd suggest something like:
/Library/LaunchDaemons/local.postfix.stop.plist:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple
.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
 <key>Label</key>
 <string>local.postfix.stop</string>
 <key>ProgramArguments</key>
 <array>
 <string>/usr/sbin/serveradmin</string>
 <string>stop</string>
 <string>mail</string>
 </array>
 <key>StartCalendarInterval</key>
 <dict>
 <key>Hour</key>
 <integer>1</integer>
 <key>Minute</key>
 <integer>00</integer>
 </dict>
</dict>
</plist>
and /Library/LaunchDaemons/local.postfix.start.plist:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple
.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
 <key>Label</key>
 <string>local.postfix.start</string>
 <key>ProgramArguments</key>
 <array>
 <string>/usr/sbin/serveradmin</string>
 <string>start</string>
 <string>mail</string>
 </array>
 <key>StartCalendarInterval</key>
 <dict>
 <key>Hour</key>
 <integer>4</integer>
 <key>Minute</key>
 <integer>00</integer>
 </dict>
</dict>
</plist>
You'll need to either use launchctl load /Library/LaunchDaemons/local.postfix.stop (or start) to load the tasks, or reboot your server.
I'm curious, though, as to why you want to do this. Mail is typically one of the services that people want to run 24/7 so they don't miss out on any emails (even though SMTP can tolerate this). Why do you want to shut yours down?

Waveburner resets (64bit) IK Multimedia plugins when stopping and starting

Similar Messages

Maybe you are looking for