Waveform Editor Grid Lines in Audition 5.5

Hi,
Anyone know how to turn OFF the grid lines (vertical and horizontal) in the Waveform Editor view in Audition 5.5? I'm on a try-out version at the moment, but have used Audition 2 for years - I loved the way the display was completely customisable. The grid lines in Audition 5.5 are very heavy, and it feels as though they get in the way of me viewing the waveform properly. It may seem like a small thing, but when you're editing thousands of files, sometimes sitting for 4 hours or more at a time, these small things can make a HUGE difference!
Here's hoping!

New Audition user, longtime audio professional, bumping up this post to 2015. Need to remove the grid behind the waveform in Audition; self-help search engine is giving irrelevant results and is wasting significant work time.
Not a big fan of this 'user community/self-help forum' business model, no offense...requesting an answer from an Adobe employee, please...as in, the company this product and service was purchased from. Thanks in advance, cheers!

Similar Messages

  • Why do my Waveform Chart Grid Lines Disappear when this runs?

    Hello all
    I have a Waveform Chart that Im using. The charts grid lines are initially set at 1 min intervals...which works fine
    However, after the 1 set of intervals (red grid lines) are reached, there are no further grid lines seen on my chart.
    Can someone tell me how to create a chart with continuous grid lines that scroll?
    thanks
    J
    Attachments:
    JH_waveform_graph_markers[1].vi ‏25 KB

    Hi hova2010,
    Please keep your questions on the same issue to a single thread. Thanks!
    Thank you for choosing National Instruments.
    Aaron Pena
    National Instruments
    Applications Engineer
    http://www.ni.com/support

  • How do I add a time stamp to the moving "Major Grid Lines" of a Waveform Chart?

    Hello
    I am using LV 8.5.1
    I am using a Waveform Chart and I have turned on the "Major Grid LInes" using the properties tab of my waveform chart. (properties-->scale->grid lines)
    When the code executes, I want to attach  a time stamp to each moving yellow grid line.
    So as the grid lines move from right to left, there is an associated time stamp for each.
    Can someone help!
    thanks
    J
    Solved!
    Go to Solution.
    Attachments:
    how do I add time to the yellow grid lines.vi ‏16 KB

    hova2010,
    If you right click on your graph and go to X Scale >> Style >> and then choose one of the 3 styles on the far left you shoul see timestamps for those grid lines.
    Ben Sisney
    FlexRIO V&V Engineer
    National Instruments

  • Digital waveform editor

    If I use the Digital Waveform Editor to create a clock, can this clock signal be used as a my clock source?  An example I am trying to reference for creation of my own VI is the Dynamic Generation and Acquisition - Demo.vi found in the Example Finder in LabVIEW 2012.  In it the On Board Clock is used for both Generation and Acquisition.  I would like to use a clock that I have already created in my waveform file because I know my other signal is working with it and the device under test when doing a signal generation and acquisition using a scope.  Any advice on how to do this (if possible) would be appreciated.

    tcarrico,
    In terms of using the waveform file that you created directly as your clock source, this is not possible. However, if you wanted to output this waveform using a function generator and then use that signal as an external sample clock for your Digitizer, this would be more likely to work. Is this more along the lines of what you were thinking?
    Robert B
    Applications Engineer
    National Instruments

  • Digital waveform editor sample size limit?

    Hi,
    Can anybody please tell me the sample size limit of the Digital Waveform Editor? Thanks!
    Jing

    Hello,
    1) You can actually acquire as many points as you want. You may be worried about the throughput of all this data from the DAQ board into computer memory, but I don't think this will be much of a concern for your application. You're limited only by how much memory your computer has. Mainly, you should be concerned about what you are doing with all those samples after they are acquired. Are you just using them once then throwing them away? (Such as the "Cont Acq&Graph Voltage-Int Clk.vi" shipping example.) Or are you streaming them to disk? If you just keep them all in computer memory, then there would be some maximum number of samples you could hold but that number would be system dependant and you'd just have to experiment to find that number.
    2
    ) That's a great idea to take those voltage signals and make them digital inputs. This way you'll also free up some more bandwidth giving you the option to increase the sample rate on your other channels. However, you won't be able to include any DIO channels in the same task with your other analog channels. You need to create a separate task for these digital input channels. Lines 0,1,2, and 4 will be reserved for communication with your SCXI chassis by the way. You also won't be able to do any buffered sampling like you can with the analog channels. The DIO for the PCI-6024E is only immediate and software-timed. (You must poll the status of the line with a software loop.)
    Let me know if you have any other questions.
    Russell
    Applications Engineer
    National Instruments
    http://www.ni.com/support

  • Amplify knob in waveform editor

    I'm using Audition CC.  When in the waveform editor, there's usually a little knob that I can use to amplify the whole file or just the selected portion.  Mine has disappeared and I can't figure out how to get it back.  Any suggestions?

    That's the one.

  • Is there a way to turn on grid lines in mailboxes like you could in Eudora?

    If anyone here has used Eudora, then you probably know that you could customize the message listing for a mailbox to turn on grid lines between message lines and or columns if you wanted.
    Does anyone know of a hack that could do that, or maybe just tell Mail to highlight every other row for easier list readability?
    Thanks!

    That would be an improvement to the interface. I've been looking for some time and not found a way to do it though. Anyone else?
    If anyone here has used Eudora, then you probably
    know that you could customize the message listing for
    a mailbox to turn on grid lines between message lines
    and or columns if you wanted.
    Does anyone know of a hack that could do that, or
    maybe just tell Mail to highlight every other row for
    easier list readability?
    Thanks!
    Mac Pro   Mac OS X (10.4.8)  

  • How to print a report without row numbers or grid lines?

    Is there a way to print a Discoverer report without row numbers or grid lines?
    Thank you.
    Blake

    Hi Blake
    You're not doing anything wrong.
    The settings made when you use Tools | Options | Sheet are global settings that are only applied to new workbooks and worksheets going forwards. These have no impact on existing worksheets or even the one you currently have open. This is because Discoverer does not know whether your original worksheets were setup in a certain way deliberately as opposed to inheriting the global settings as they were at that time. What this also means, reading between the lines, is that these settings must then be stored within the worksheet itself, and this is exactly what happens.
    Thus, to edit an existing worksheet's settings you need to open the worksheet, right-click in the sheet and from the popup select either Format Table or Format Crosstab depending upon the type of worksheet you are working with. After making any necessary changes you will need to save or re-save the workbook in order for those settings to be remembered for the next time.
    Best wishes
    Michael

  • When I have a border around a group of cellsand remove it, it also removes the grid lines. When I go to print the sheet, there are blank spaces where the border had been. I'm sing a MacBook.

    When I have  a border around a group of cell, how do I remove it. If I outline the cells again and then show in the Inspector NO BORDER, it removes not only the borderbut when I go to print it also the grid lines.

    What application are you using? Numbers? Excel? Something else?
    For help with Numbers spreadsheets go to this forum.
    If you are using Excel, Microsoft has a forum to help you.
    If it is something else, let us know what and we will try to point you in the right direction.
    Best of luck.

  • Printing iCal grid lines...?

    Hello.
    I would like to print my weekly calendar with the grid lines showing.
    Is there a way to do this?
    Thank you.

    Hi Jack,
    I'm sure anyone who actually knows details of iCal in Leopard is not allowed to say.
    Currently you could have 3-4 categories in different colors, but when you publish to the web/.Mac they are all in the same color
    I currently publish three seperate calendars to a Webdav server and use PHPiCalendar to view them. They all show up as separate individually coloured calendars.
    I'd submit your suggestions as user feedback if I were you.
    Best wishes
    John M

  • How can I make the GRID lines more bold within a table in the new Pages?  (Not the outline of a table)

    I can't find where to darken GRID lines on a table in the new Pages.  I can make the outline more bold, but not the grid lines within the table.  Is there a way to do this?  The default grid lines are far too faint.

    Yeah, the Help is missing a little.
    If you select the block of cells that you want to change, then in the Format inspector:
    Select the Cell tab
    Expand the Border section
    Set a line type
    Set a line width
    Choose a line color
    Choose one of the nine options for which borders get the new settings

  • Change Color from grid lines in Flash 2D Line Chart

    Hi,
    does anybody know how to change the color from the grid lines in 2D Line Chart?
    The color is always black (000000), I will use gray (CCCCCC).
    I can use a custom XML. Can you give me an example please???
    Where can I read something about the possible XML-Tags in Custom XML for Charts?
    Best regards
    Simona

    Simona,
    anychart.com has XML reference you can use for the charting engine in APEX.
    Try using custom XML and sticking this inside the grid > values tag:
    <lines color='0xCCCCCC' />- Marco

  • How to hide the grid lines between two rows in a ALv? Please help!

    Hi Experts,
             I have a ABAP ALV(reuse alv grid FM) report.
    The last field in the ALV is "Description" which can contain data of size more than 130 chars.
    Since the max field length in ALV grid is 130 chars hence I am splitting this field value whenever the field length is more than 130 chars.
    After splitting I am generating duplicate rows but with different "Description" field values ( each contains the splitted values".
    For example:
    Name| City | Description                             |
    Hari|HK    |Employee responsible for time management |
    Hari|HK    |and issue resolution                     |
    Now I want to hide the grid line between these two rows
    and just for Description field.
    In other words I want ALV to display like this:
    Name| City | Description                             |
    Hari|HK    |Employee responsible for time management |
    Hari|HK    |and issue resolution                     |
    How can I acheive this?
    Please provide some sample code.
    Please help. I will be really greatfull to your help.
    Thanks
    Gopal

    Hi Rich,
          If that is the case then atleast how can I hide the complete row grid line?
    Please give some sample code.
    Thanks
    Gopal

  • How do I remove unwanted dark grid lines from my Basic_Graphic_Textures?

    Basically, I have been having dark grid lines show up in files I create in Illutrator CS6 as of late.  This particular instance is surrounding a background layout im trying to create.  I select a 650x500 rectangle and apply a patterns fill.  To be specific, Patterns--->Basic Graphics--->Basic_Graphics_Textures-----Diamonds.  No matter what I do, there is a dark grid benath the fill. It shows up in any fill I have been doing lately.
    The above image is a layout with 3 layers.  1 white layer(bottom), 1 red/pink layer(middle), and the top layer being the rectangle/diamond fill.
    This only happens with pattern fills and with fluid repeating text fills.  Normally, the dark lines are full squares, but in the above image they are only running vertically. Any suggestions would be greatly appreciated.  I'm not sure  if this is just a hardware issue with my graphics card, or if I'm missing something else.

    The patterns are for filling space with a repeating pattern but have some problems as you are discovering. Try dragging the swatch for the Diamonds texture from the Swatch panel to a file you have open. You can see how the pattern is created. Notice the overhang on both sides. Does this look like your problem?
    By changing the stroke of the line in the Diamonds pattern to 0.25 and replacing the swatch I have to go out to 50% size to see the repeat like this

  • Unable to bold a cell verticle line in Cross-tab Format Grid Lines

    Hi
    I am unable to bold a random Cell vertical line inside the cross-tab. My cross-tab is having access database which pulls every data correctly,
    To elaborate , here is the images to make it clear.
    First one is the current output of cross-tab & 2nd one is the desired output :
    To make it more clear ,
    I am giving the screenshot of Format grid lines option,  when I have selected Cell vertical lines , I can change Line options (Like style,width,color) from it. When I change it, it changes all three lines simultaneously. But, in that, I just want to bold only the last line of this grid.
    The screenshot as follows (To denote the lines, I have put numbering under the vertical lines, where I want to bold only the third one) :
    Please let me know, if  any solution to this. I m using CRVS_13.
    Thanks in Advance.

    Hi,
    try to do this way..
    Right click on crosstab - > crosstab expert -> customize style -> select your particular column then goto Format Grid Lines -> select your particular one based view -> ok..
    I hope this not yet possible because select 1 automatically 2,3 vertical lines are selected..
    See how it works......Please update ASAP
    tHANKS,
    dj

Maybe you are looking for