Waveforms keep calculating on each open of a project
I'm wondering if anyone else is having this problem in Logic 8 - I haven't experienced it in v7. I have a couple projects (that coincidentally were converted from Logic Express 7) that re-calculate the waveforms on 1 or 2 files every time the project is launched. There's nothing in particular about these specific audio files that are any different than the other files in the project, and when closing the project, everything seems to close gracefully (i.e. no crash on project exit).
Anyone have any tips or ideas?
Thanks,
-Mark
Thanks for the tip, but it's not a permissions issue. All of the audio files in the project have the same R&W permissions, and it's only 1 of several audio files (with the same permissions) that seem to be re-drawing on each launch. Strange.
Similar Messages
-
I was loading a big file of photos from iPhoto to Adobe Photoshop CS3 and more then midway it keep collapsing, yet each time I re-open photoshop to load a small amount of photos, it load the previous photos again, and again it collapse. is there a way to stop this cycle and start a new?
http://helpx.adobe.com/photoshop.html
-
InDesign CS5.5 keeps crashing when I open a particular document
InDesign CS5.5 keeps crashing when I open a particular document. This suddenly started happening a few hours ago, and other files are unaffected. I downloaded a backup from last week and that was fine, but I need to get this latest version working again. I've cleared out the Recovery folder, deleted Preferences, and even reinstalled InDesign - all to no avail.
I'm running Windows 8.
Any help gratefully received!Even after emptying the recovery folder?
It's either a damaged install or a bad font or some other conflict. Do the font trouble-shooter first, then move to checking for a conflict.
To check for a conflict, go to the start button and in the Search field Type msconfig to bring up the configuration utility. Open it, go to the Services tab and click the box to Hide All Microsoft Services. You can uncheck just about anything that's left (for diagnostic purposes) except FLEXnet Licensing Services and a service starting with ##ID_String... which are part of the Adobe licensing sytem and need to be active for Adobe product to run.
Now switch to the Startup tab, and uncheck everything except your mouse driver and the Adobe Service Manager for this version.
Reboot. Ignore the warning about startup in diagnostic mode for the moment and Launch ID and see if it works. If it does, go back msconfig and add back startup programs in groups, rebooting each time and repeat the test until you get a failure. If all the startup programs work, repeat with the services tab. If nothing causes a problem I have no idea what's going on.
On the other hand, if ID fails again straight off with all that stuff disabled, the installtion is corrupt. Run the cleaner tool (CS Cleaner Tool for installation problems | CCM, CS6, CS5.5, CS5, CS4, CS3) and reinstall while still in diagnostic mode, then run msconfig one last time to restore normal startup. -
How to keep Folder Windows From Opening When Turning On System
I have a couple hard drives connected to my APExtreme. When I turn on my Mac Mini it mounts the drives correctly and shows them on the desktop. It also opens windows for each drive. How do I keep these windows from opening?
Thanks!Uncheck this when shutting down:
-
ITunes keeps re-configuring after opening
My problem is my itunes keeps re-configuring each time i open up iTunes, this usually only happens after an update, then you agree to some terms .... etc.
Now it happens everytime! I had this problem b4 but i forgot how i fixed it.
"Please wait while windows configures iTunes" and you wait some time while it does it. I've tried reinstalling it and that doesn't seem to work... neither does removing Pref folders.
PLEASE HELP!Its cool, here's what you have to do
go to start menu --> run
type regedit, press enter
go to computer/hkeyclassesroot/
find pcast (make sure its pcast and not .pcast, the one you want is nearer the bottom) and right click it
click permissions
during the course of this you may get a message saying you cant change anything, but you can change who can change things. just click ok.
click advanced, then owner tab
change the owner from administrator to whatever name you are using by clicking your username in the box
click ok on both pop-ups to get out of them completely
right click pcast again
click permissions
click OWNER RIGHTS
click the allow boxes beside full control and read
click ok and then exit the program
All set! Now open iTunes normally and it should be fine. Hope this helps. -
When I am using Firefox I keep getting unrequested Windows opening with full page advertisements. Why is this happening and how can I stop it? This is particularly aggravating when the new page has music or a voice message that intrudes even when I am not looking at the page.
Do a malware check with some malware scanning programs on the Windows computer.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.<br /><br />
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
*http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked -
How do I keep the Character panel open and why are my font examples fuzzy?
Hello,
I am unable to keep the character panel open while editing text. The options will not open in the top tool bar next to color and stroke. The link to the character panel is in the top bar, however, I must click it each time to open. Problem 2, is that even after opening the character panel and opening the drop down box, the 2nd column of text, the column that shows the font examples, is blurry. I've been dealing with this for some time, but had a little extra time today to ask for help.
I am using a PC and using Illustrator in Creative Cloud 2014.1.1 Release, 18.1.1(64-bit).
JulieHello,
Thank you for the reply. When I do Window > Type > Character still the palette opens up and I want it to actually be in the bar at the top. I just opened an ai document from one of their tutorials and the characters are now open on top. The dropdown is still wonky.
The left side is very sharp, the right side is fuzzy. -
Interest calculation only for open item for customers
Hi, do you know how to calculate Interest calculation only for open item for customers?I do not want to see cleared items. I have problem with customization.
Best Regards
TomIn the item interest calculation, you can tick the 'open items' for calculation of interest and also select the 'no cleared items'.
Regards -
Interest Calculation on Cleared Open Items
Hi,
I have the following scenario:
We have a receivable to a customer. Posting date of the transaction is June 01, baseline date is also June 01 and due date is on July 15.
Entry is (Exhibit a)
A/R-Customer 1
A/R-CEWT
At the same time, we have also CM to the customer with July 01 as posting date and July 01 as baseline date.
Entry is (Exhibit 2)
A/R-CEWT
A/R-Customer 1
In order for the customer not to pay anymore the A/R-, we did automatic clearing for the AR and CM with July 1 as posting date of the clearing.
Entry is
A/R-Customer 1 (Exhibit 2)
A/R-Customer 1 (Exhibit 1)
But why is that when i run the interest on July 25, interest was still computed for the AR (Exhibit 1) when there should be none because it was already cleared on July 1, 14 days before it become overdue.
Is it because clearing is also customer?
Thank youHi,
We can calculate interest on items cleared with in the calculation period.
When you are calculating interest on open items, system will check open items as on the Calculation Date.
But if you want to calculate Interest on items cleared with in the calculation period., you have to check Calculate Interest on Cleared Items also.
For Instance: If you are calculating Interest on 31st July for the period of 01.07.2009 to 31.07.2009, in this case
some open items are already cleared with in this calculation period, even though you have to calcuate interest for those cleared items for that many days. System will calculate interest for that many days.
Try with this option, still if you need any help please let me know.
Thanks
Chandra -
How do I keep applications from automatically opening when I power up my Macbook Air?
How do I keep applications from automatically opening when I power up my Macbook Air?
When you Shutdown or restart, uncheck this option.
Regards,
Captfred -
I am doing two people's jobs and I need to use two separate log-ins on the same website. How can I keep both log-ins open at the same time. Everytime I switch tabs I have to log in again.
Try one of these extensions for multiple cookie sessions.
Multifox: <br />
http://br.mozdev.org/multifox/ <br />
Cookie Swap extension: <br />
https://addons.mozilla.org/firefox/3255/ <br />
Cookie Pie extension: <br />
http://www.nektra.com/oss/firefox/extensions/cookiepie/ -
Keep the styles drawer open in Pages 5?
I searched a bit and didn't see anything on it. Please forgive if this has been answered. Is there a way to keep the styles drawer open as in previous versions? My workflow is to type in everything I want - as in a screenplay - and then use the arrow keys and mouse button to quickly descend the document and change the styles as I go. As in keep the mouse on a particular style (CHARACTER NAME, for instance) and then as I hit a paragraph that needs that style just click while arrowing down...
Anyway...I don't see a way to do this in the new version.
TIA.
DavidUPDATE -- I have discovered a fix of sorts. Sorry if this is obvious.
Go to VIEW / Customize toolbar and drag in "copy style" and "paste style"
you can also access these from FORMAT menu or via command-option-C; command-option-V
Use this function to copy the style you wish to apply
Then go through and paste it everywhere you want it.
Not as good as the old way, but probably more efficient than constantly re-opening the drawer.. -
Hi, dear friends,
I have a big problem:
Since I installed OS 10.9.3 MAV (Maverick), I am unable to use Adobe CS6. Each opening Photoshop attempt, the system tells me an error of type 6 or 16.
Thank you for your help, Guys,
Marius SANNAWhich version of Photoshop do you have? The current version is 13.0.6.
-
I have lightroom 5 and after I just tried to upload my wacom tablet 3 on laptop and, it's not compatable. I've tried to remove the Wacom program. Awindow box keeps apearing when I open lightroom it say tablet version mismatched and it completely closes my lightroom on me. What do I do??? I need my lightroom
Hi,
/Users/sarahschadek/Desktop/Safari.app/Contents/MacOS/Safari
Move the Safari app from the Desktop to the Applications folder.
Restart your Mac.
That's why you see this:
When I try to do the updates my computer says it has ready it goes through like it is downloading them then at the end it says some of the files could not be saved to "/" files.
After your restart your Mac, click the Apple menu (top left in your screen) then click: Software Update ...
Carolyn -
Import GL opening balance,AR and AP aging with each open invoice data
We tried to use Data Transfer Workbench to import GL opening balance back to 2007 year end but got an error "can not post to Control Account".
In Admin>Sys Init> Opening Balances> GL opening, Businesss Partner, 1099 opening balance can import all opening balance with AR, AP. But, can not import for each open invoice amount, invoice number, invoice date information.
If we entered those GL, AR, AP opening balance those won't affect the GL F/S, right?
We will need to close year 2007 then import each period Trial Balance Debit and Credit amount for each account then close each period to have all 2008 each account period data until May 2009.
Would like to know which is the best way to do this?
Edited by: Lily Chien on Jun 4, 2009 11:21 PMHi,
Please, use oInvoice and oPurchaseInvoice templates (as service type and offset account is opening balance account) to import opening balance. This don't affect to inventory, P/L account.
Hope this helps,
Son.
Maybe you are looking for
-
Why can't I see my installed profile on my Apple TV?
I created and installed a WiFi profile using Apple Configurator 1.2.1. on my Apple TV 3rd Gen running 5.2.1. I waited until the Green icon with the check displayed showing successful installation of the profile. I then removed the USB cable and press
-
How can I retrieve clips lost by iMovie when selecting "force quit"?
While in the process of deleting a single block of frames from my source clip (from the entire 43 min. video) iMovie froze, I had to force quit, and then found iMove had trashed the entire 43 min. clip. Can this irreplaceable footage be restored? W
-
Hi Experts, Please help me on this ; We have defined a new planning profile ( T-Code : KP66 ) and assigned that to a new planning profile in SPRO following the path : SPRO -> controlling -> cost center -> accounting -> planning -> manual planning ->
-
LSMW - create Scheduling Agreement for subcontracting position type
Hi all, I want to use LSMW to create a scheduling agreement with position type L (subcontracting). I'm using Business Object Method BAPI with Business Object BUS2013 Method CREATE Message Type PURSAG_CREATE Basic Type
-
I have been using Lightroom 4.4 successfully for over 2 years. Just tried to import some new photos after a vacation and the application crashes when I click "import" every time. Tried restarting computer. Version says it is up to date. How do I g