Waveforms not showing up in Timeline

Need a little help.
I can't get the audio waveforms to show up in the timeline. All I get is little x's across the audio tracks.
Any help is greatly appreciated.
Thanks,
Chikers

in addition:
what i'd call the creation of waveform peak files (so you can see the waveforms) seem to be only created when the timeline is zoomed out where you can see all of a particular clip or clips.
after you zoom out, then wait, you'll see the little x's turn in to visible waveforms over time.

Similar Messages

  • I recently updated to ios 6.1.1 and since then, the photos i am uploading via ios does not show on my timeline or on the newsfeed, but the pictures show in the album. can you help me with it? thanks.

    i recently updated to ios 6.1.1 and since then, the photos i am uploading via ios does not show on my timeline or on the newsfeed, but the pictures show in the album. can you help me with it? thanks.

    fingers crossed, it appears they are working the bugs out of this update....i was able to post a pic to my newsfeeds/time line this morning....first the picture went into the ios album but within a minute, it appeared on my timeline! im glad ...

  • Waveform NOT showing up

    Windows 7
    CC2014 Premiere - up to date.
    P2 Footage
    Still, constantly having issues with the waveform NOT showing up in the sequence.
    Usually the second 1/3 or 1/2 of the footage in the sequence.

    Hi editman,
    Please tell us more about your system:
    FAQ: What information should I provide when asking a question on this forum?
    ... if you want anybody to give you qualified assistance, provide the suggested info.
    especially GPU and Audio Hardware and the media formats affected.
    Also:
    Are the clips nested or multicam?
    Did you render the sequence audio?
    Did you choose Automatic peak file generation in the audio preferences?

  • Audio Waveforms Not Showing In Timeline - Bug Report

    When I send P2 Footage from Prelude to PP, the audio waveforms on the timeline do not show, even though the settings are correct. I have to close PP and then reopen it and then they show.  It is some sort of a bug.  I'm on Mac OS 10.9, latest version, fast computer. Anyone else having this issue?

    There are three kind of audio tracks, stereo, mono and 5.1. Mono can only be placed in a mono track, stereo only in a stereo track and 5.1 only in a 5.1 track. By default a new sequence has three stereo tracks, so when you enter mono material, a new mono track is created in track 4.
    In your case you probably have 6 audio tracks of one kind and the 'lost' one is another kind of track and that is the reason it ends up in track 7. You can of course delete empty audio tracks, which will cause track 7 to move up.

  • Capacitor & inductor current waveforms not showing correctly

    Hello, 
    After a fair amount of time playing around, I cannot seem to get the current waveforms of a purely capacitive / inductive circuit to show correctly on the oscilliscope.
    since I through inductor =( ∫v  dt) / L
    I get extremely high current values on the oscilliscope (in the region of kA) adn for a purely capacitive circuit - in the region of pA.
    ie, a square wave DC source, 10V to -5V, 1ms @ 10V and 2ms @ -5V, period of 3ms - connected to a 1mH inductor.
    (∫10 dt)/L = (10 x .001) / .001 = 10A - so at 1ms, the current will rise to 10A ( in a linear fashion)
    [(∫10 dt) / L] from 0 to 1ms + [(∫-5 dt) / L] from 1ms to 3ms = 0 = current will drop to 0A in a linear fashion from 1ms to 3ms.
    THIS does not show on the osciiscope!
    By adding an instantaneous current probe onto the circuit - this will roughly show the correct value - but obviously will not show an accurate waveform.
    Any help would be extremely appreciated.
    Many thanks.

    Thanks for your reply,
    I'm using 12.0.1 power pro edition
    I literally just opened up the file to check it and to post it here, and it works?!
    Rather confusing as it was most definately not working when I started this thread.
    Maybe the program needed and clean startup or something.... but the current values were all over the place.
    When I analysed the circuit by hand, I would get values for current and voltages but when simulated they were in the range of 500KA etc with a simple capacitor circuit with a 10V sawtooth supply.
    Thanks anyway.
    SS

  • Waveforms not showing up in final cut pro 10.1.3

    Hi there,
    I've recently updated to FCP X 10.1.3 - mostly works fine but i've got a problem with audio waveforms (both separate audio and audio track of a video clip) not rendering/showing up when editing in the timeline.
    Also i've found multi-cam or syncronising clips to be worse at syncing audio than previous versions.
    Anyone else have this problem, or any clue how to fix?
    Thanks.
    David

    Apologies! All sorted. My mac was just taking so long to render the audio lol
    Still having issues with syncing audio (zoom h4n) video clips (multicam clip or sync clips). Normally works like a dream even on difficult material, but for some reason now randomly sync's clips way off the mark.
    Cheers

  • Audio waveforms not showing up in viewer

    Using Final Cut Pro 6. When double clicking an audio track, it doesn't show up correctly in the viewer. The top half doesn't come up at all and the bottom doesn't look right. No idea why this is happening or how to fix it. Tried dumping the audio waveform cache, but that did nothing. Help ASAP would be much appreciated as this system needs to be used to edit something with audio right away. Thank you!

    I am having the same problem. I am running FCP 6.0.4 and when I double click on an audio clip in the timeline, there is no waveform in the viewer. Just a big black box.
    In the past I have deleted the waveform cache folder and trashed preferences. But this isn't working anymore.
    DKG

  • Waveforms not showing properly from purchased ITMS

    I have imported some songs that I purchased from iTunes into the iMovie timeline...Unlike songs that I have ripped from a CD they don't seem to show a waveform and instead just show a big purple bar which makes things trickier to synch to the images/clips...
    Sorry if this has already been covered in a different forum but if someone could point in the right direction on how to resolve it I would be most appreciative.

    OK....sorry for the name change but this is still DVDFLASHBACKS and my quesion...apparently my settings for the forums didn't carry over properly and now I have somehow ended up with two profiles one for each machine but using the same login id...just another headache since I got this frickin Macbook Pro but that is for another thread...
    i have discovered that my problem with the wave forms only seems to be happening on the Macbok Pro...so I wonder if it is something wrong with iLife 06 on the Intel platform only...
    Using the exact same song from ITMS on my G5 I am able to see the waveform...

  • Outlook 2010 : Scheduling Assistant not showing participant's timeline, stuck on updating and won't finish

    Since last week when i tried to schedule a meeting, i am not able to use scheduling assistant to view the participants time. It will just display a gray bar with 'Updating Schedule Information" and it goes on without displaying anything. The
    same goes for my calendar.  I've added few colleagues' calendar and previously i was able to view their time, now it just says 'updating' with the spinning animation.
    I tried to :
    - start outlook in safe mode, not working
    - Create new profile with my account and restart outlook. No luck
    - enable logging on Outlook, but there is not <date>-<time>-fb.log file created when i tried to view a colleagues calendar.
    but,
    - Start OWA and view both calendar and scheduling assistant, works fine!
    - on my colleagues laptop, added my account and it works.
    It seems to me Outlook Calendar is not retrieving the information from exchange server. Sending email and receiving email works as normal and i can see my outlook status is connected to exchange server.
    Any idea how to fix this? Any help is greatly appreciated.

    Hi,
    According to your post, I understand that there is an issue when using Scheduling Assistant in Outlook. I noticed that the issue doesn’t exist in OWA or on your colleagues computer.
    Please change a new computer with your domain account to login to check whether the issue persists. If the issue doesn’t continue in new computer, the issue may be caused by some third-party programs in your original computer. We can disable them and perform
    a clean boot in Windows for the computer to have a try:
    http://support.microsoft.com/kb/929135/en-us
    Thanks,
    Winnie Liang
    TechNet Community Support

  • After transferring clips to Final Cut, they do not show up in the events library. They show up in the timeline of my project, though. how can I see then in the events browser?

    After importing clips to Final Cut, they do not show up in the events library. Events from 2014 show up, but not 2015.They show up in the timeline of my project, though. How can I see them in the events browser?

    TThose aren't bins. Those are just groupings based on when the content was created or any other selected parameter. Use the action popup in the toolbar tho change the setting.

  • Audio is not showing up in the browser nor the timeline???

    i have a question. i recorded a video and viewed it and the video and audio is working. when i imported it and it showed up on the browser the audio outputs were not showing up. also when i tried to dragged it to the timeline the audio tracks didnt show up either. what could this be?? i have a sony dvcam hdv deck in which someone used it and im thinking maybe they changed some settings on the deck?? help please!!??

    The VU meter is the audio meter (see FCE 4 user manual from page 56). If a clip include any audio, this meter should move when clip is played from browser to viewer.
    The camera audio should be 16 bit 48 kHz. You can use 32 kHz if you select the correct preset in Easy setup dialog box.
    Did you see the link provided earlier for patch panel bay use?
    The patch panel switch is the way to tell to FCE where (understand on exact layer) adding video and audio in timeline. If the audio switches are disconnected, the edit will insert only video. There is a contextual menu to reset the patch panel switch.
    Michel Boissonneault

  • Titles are not visible, they show up on timeline as a grey box no text  does not effect other events or projects

    titles are not visible, they show up on timeline as a grey box no text  does not effect other events or projects. could this have something to do with motion

    Without seeing the timeline it sounds as if they've been off. Maybe you pressed the V or the role is switched off in the timeline index.

  • PSe 8: Clips in timeline/sceneline not showing in project view.

    IN Photoshop Elements 8 I have a clip in my timeline/sceneline that is not showing up in Project view nor does it have the "P" in the bottom right corner in Organizer view. I thought that project view is supposed to display all scenes currently in the sceneline/timeline.

    Oops - this should be posted in the Premiere Elements Section.

  • Effects not showing in timeline

    Hi
    When i'm color correcting a clip, it's seen in the user. But when Im putting into the timeline the effect is not showing. if I now right click at an view it in the viewer the effects is no longer shown. All though you can see the settings it won't show if you change them.
    My RT settings is not set to show baselayer only.
    It would be great if someone can help me out!

    It would be helpful if you would describe the sequence of actions you are taking.
    Are you applying one of the color correction filters to a clip already edited into the sequence / timeline? Etc.

  • Why the waveform in Main program does not show up?

    Hellow!
    Attached is a simple example of the problem i met,when i run "main1.VI",why the waveform in subvi "1.VI" did not show up?what shall i do to make it show up? thanks!
    Attachments:
    test.llb ‏22 KB

    I thought I already explained that. You call a subVI that never stops which updates its own hidden waveform graph forever. This subVI cannot produce any output to the main VI until it finishes. It never finishes!
    Dataflow dictates that:
    A node cannot execute until all inputs have received data.
    A node cannot produce output until it finishes.
    You have a few options, two are shown in the attached modification:
    (1) get rid of the while loop in the subVI and place it in the main VI. Now the subVI gets called successively, always immediately returning a value. (This is the correct and recommended way).
    (2) Feed a reference to the chart of the main VI to the subVI, then update the main graph via property writes. This is not very efficient but can be useful in a limited set of circumstances. The implementation is also currently incomplete, because the subVI cannot be stopped.
    In any case, please put some small wait in each of your loops. Else they spin as fast as possible, consuming all CPU and making your computer sluggish.
    LabVIEW Champion . Do more with less code and in less time .
    Attachments:
    main3.llb ‏41 KB

Maybe you are looking for