Waves bundle in audio plugin list?
Hi,
I don't see my waves bundle in the audio plugin list in fcpx?
In Pro Tools I see it and it is working.
I do see my psp vintagewarmer plugin and my izotope plugin.
They have to be AU format, and installed for Logic. FCP X reads from Logic, is not a DAW so it won't read all audio plugins. But, you can get Automatic Duck for free, and export and OMF to go to ProTools or SoundTrack Pro or Logic.
Similar Messages
-
Just completed first project since updating to 10.0.8 - which was not without it's problems, invovling much deleting of preferences to cure the "restoring windows" hang... Anyway - made a compound clip of the final for export and went to grab an audio limiter to push the levels up a little only to find I had no audio plugins anymore - or so I thought. After much frustration and back and forth with safe boots and more preference deleting I discovered that I did in fact still have all my audio plugins - BUT - all of the catagories that used to display them on the left hand side of the effects browser are now missing; INCLUDING the main catagory labelled "AUDIO" - so it looks like there are no audio plugins available at all.. but actually, if you select "ALL" from the VIDEO list and then scroll down past the video plugins you get the the audio plugins... :-O
So I'm posting here for 2 reasons - firstly in case anyone else experiences the sense of panic I did when I thought I was going to have to export the audio to process outside and re-import (hours before delivery) and secondly because I would love to know "Where have all the audio catagories gone?"
I have Waves Mecury, UAD and many, many other plugins installed (594 in total) - so working my way quickly through the list to find what I want is now a complete pain.
Anyone have any ideas? Or is that just "progress'...?I have Waves Mecury, UAD and many, many other plugins installed (594 in total) - so working my way quickly through the list to find what I want is now a complete pain.
Anyone have any ideas? Or is that just "progress'...?
No, this must merely a glitch that may probably be fixed by one of the standard troubleshooting techniques:
1) trash preferences (which you probably tried already)
2) revert to original layout
3) delete the layouts folder inside ~/Library/Application Support/Final Cut Pro -
Third Party VST audio plugins - stereo, multichannel
Hello,
I am developing VST audio plugins. I have the trial version of Adobe Audition CS5 on Mac OSX and as I started to realize this version of Audition doesn't support 64-bit VST plugins, is this correct? or is there something I should do for Audition to scan and load my 64-bit plugin?
Another question I have is well I just made a 32-bit version of my plugin for Audition to find it and it works fine when its a stereo 2 input 2 output plugin.
But I have a plugin that is 2 input 4 output and although making it 32-bits Audition will scan and find it, It will always be disabled in the plugin list and I can't find a way to enable the plugin.
I would like to know if its possible to have a plugin that has more than 2 outputs and what do I have to do to enable it since the standard way won't do it (although the plugin is found). And also what is the deal with 64 bit plugins and Audition CS5.
Any information would be highly appreciated!
Thanks you very much.
Sergio.sergexte wrote:
Hello,
I am developing VST audio plugins. I have the trial version of Adobe Audition CS5 on Mac OSX and as I started to realize this version of Audition doesn't support 64-bit VST plugins, is this correct? or is there something I should do for Audition to scan and load my 64-bit plugin?
This release of Audition is 32-bit only and thus only supports 32-bit VST plug-ins. You may wish to try your 64-bit VST in Premiere Pro as it is a 64-bit app that also supports third-party VSTs
sergexte wrote:
I would like to know if its possible to have a plugin that has more than 2 outputs and what do I have to do to enable it since the standard way won't do it (although the plugin is found). And also what is the deal with 64 bit plugins and Audition CS5.
You can have plug-ins with more than 2 outputs, however, we don't support plug-ins with asymmetrical channel configurations. There's a lot of details that need to be attended to in order to get that to be bulletproof. So if you had something that was 6 in and 6 out, that should be possible in this version of Audition. -
Third party Audio plugins don't work here
I'm wondering if someone is able to use third party Audio plugins (like Waves, Sonnox, Sonalksis, etc.) in FCPX. I can't. I have them for Logic and I can see them in FCPX, but if I try to use them I encounter various issues (settings not saved, FCPX crashes, and so on...).
Only Logic plugs work fineThere are NUMEROUS of issues with third pty AU's in FCPx. I have reported many of them. Settings not getting stored, crashes etc etc etc...
Plugs that work perfectly in Logic Pro....
AU integration in FCPx is highly erratic. Unfortunately.
You also wanna be VERY careful when using .CAF files in FCPx which have more than two channels of audio. Distortion etc... are bound to happen unless you take appropriate measures and disable channels not pertaining to stereo. -
I couldn't find a place where this really fit—it's an audio plugin question, but I don't use the Pro Software—so I put it in the general OSX category; feel free to move it.
My issue is with the DVC PRO HD Audio plugin (/Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin). I am using a simple afplay command to try and add sounds on startup/login, but I note the following error when using the command through terminal:
afplay[18548:903] Error loading /Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHDAudio: dlopen(/Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHD Audio, 262): no suitable image found. Did find:
/Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHDAudio: no matching architecture in universal wrapper
2010-08-10 21:08:07.249 afplay[18548:903] Cannot find function pointer NewPlugIn for factory C5A4CE5B-0BB8-11D8-9D75-0003939615B6 in CFBundle/CFPlugIn 0x10020d3a0 </Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin> (bundle, not loaded)
For some reason the audio plug in is not loading correctly, and i can't figure out why. To my knowledge I have never messed with the audio plugins on my computer. Kicker: the command worked the first time I used it, but has failed in subsequent uses. Not sure if restart fixes the issue. Any ideas?
-KaiI have this problem happening on a fresh OS X 10.6.5 Install + Logic Studio 9. The console log is filling up with it like crazy. I guess I will remove it from the system for now, but I sure would like to know what it is and what affects the removal of it may have.
I get the same errors as everyone else, and my plug shows as Universal with a version number of 1.3.2.
System Preferences[713] Error loading /Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHDAudio: dlopen(/Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHD Audio, 262): no suitable image found. Did find:
/Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHDAudio: no matching architecture in universal wrapper
System Preferences[713] Cannot find function pointer NewPlugIn for factory C5A4CE5B-0BB8-11D8-9D75-0003939615B6 in CFBundle/CFPlugIn 0x2000fb200 </Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin> (bundle, not loaded) -
Fcp wont load cause of audio plugins
Hi. I work on Fcp studio and Logic pro. I have a lot of audio plugins for Logic espescially waves. But now fcp wont load cause it crashes when it gets to a certain plugin. I don't want to use audio plugins in fcp as I do my audio in logic.
Why has fcp seen my logic plugins and how can I stop this, I can't run fcp. I've tried dragging the components folder out but no luck. There must be a resolution to this, it's driving me nuts.
Many thanks
Antony.I've had the same problem.
FCS maintenance pack is not really an option - it disables the plugins globally, so Logic wont load them. It's also expensive (for what it does) - $169.
The easiest workaround I found is to shift the plugins (located in the /Library/Audio/Plug-Ins/Components/ folder) to - for example - another folder (not called 'components') on the desktop, before launching FCP. Then you can move them back before launching Logic. A pain, yes, but until Apple fixes their problem...waiting.
None of the plugins in this folder are core to FCP (if you're like me they'll be all Logic plugins), so there are no consequences to FCP. You could probably keep some in the folder, as I think the problem has got to do with the number of plugins (a different plugin crashes FCP every time for me).
Cheers,
Dan -
After some experimentation, I've found that CS6 Audio Plugin Manager doesn't remove old listings for plugins in the UI, and there's no way to remove them. (I can choose not to enable them, but they still appear in the list. So I now have, for example, three instances of a Lexicon plugin, only one of which is functional.) Is there a way I haven't found to get rid of the ones that no longer need to be there?
If you choose the option to "Scan for plug-ins" making sure the "Rescan existing plug-ins" box is ticked, do you not "lose" all those extras listed?
I've not needed to do this recently but I'm sure that's the method I used some weeks ago to remove from the listing some items that were no longer present.
Jeff -
Imovie wont open because of razer audio plugin
Since the newest imovie updated I cannot open it. I Get an error that says quite unexpectedly because of the Razer Audio plugin. The only Razer software I have is for my mouse. As far as im aware it has nothing to do with Audio, and I movie worked fine with it before the update. Any fix ideas other than uninstalling my mouse?
/Library/Audio/Plug-Ins/HAL/RazerAudio.plugin/Contents/MacOS/RazerAudio
Remove the plug-in. -
How can I get the rest of my third party audio plugins (UAD & Altiverb) to show up in FCPX
Hello Everyone,
In FCPX'as audio effects I can see the Logic (included with FCPX) plugins, as well as my own Celemony (Melodyne) & PSP Audioware plugins. However, my UAD plugins and Altiverb are not there. How do I get FCPX to see my other audio plugins that are also currently on my machine?
Any help appreciated, thank you.
~Shea A.J. Comforterr = -50 when downloading from store - https://discussions.apple.com/thread/3697501 - delete incomplete downloads from downloads folder as per http://support.apple.com/kb/TS3297
iTunes Store: "Error (-50)" when downloading purchased content - http://support.apple.com/kb/TS1583 -
hi there...
1) firefox has been giving me problems for several months where it just stops responding, meaning I click on one of the 5 tabs open then it gives me msg "firefox not responding", also happens when I am working with xsitepro website builder development software stops me from moving around the xsitepro program and firefox again says firefox not responding
Note: However, when firefox gives me "not responding msg" it responds after a few minutes and gives me access the tab i clicked on but then happens again when i try to click on another tab
2) went to a page that firefox listed plugins http://www.mozilla.com/en-US/plugincheck/ and there are several plugins listed that I do not know what it means below the ones it says it is updated, those are listed as " unknown plugin and ?research "
Not sure what does this mean as far as those plugins that are listed unknown and research. I did a search to see if I could find those plugins under addons but did not see them listed so are these plugins being used and installed on my firefox browswer and if so why are they hidden if they are installed or are they not installed at all
I did a copy and paste of the plugin check page so u can see what i see below:
The plugins listed below are up to date
Plugin Icon
Plugin Icon
Java(TM) Platform SE 6 U22
Next Generation Java Plug-in 1.6.0_22 for Mozilla browsers 1.6.0.22 Up to Date
Plugin Icon
Shockwave Flash
Shockwave Flash 10.1 r102 10.1.102.64 Up to Date
Plugin Icon
Java Deployment Toolkit 6.0.220.4
NPRuntime Script Plug-in Library for Java(TM) Deploy 1.6.0.22 Up to Date
Plugin Icon
Adobe Acrobat
Adobe PDF Plug-In For Firefox and Netscape "9.4.0" 9.4.0.195 Up to Date
Plugin Icon
Google Update
Google Update Unknown plugin Research
Plugin Icon
RealPlayer(tm) HTML5VideoShim Plug-In (32-bit)
RealPlayer(tm) HTML5VideoShim Plug-In Unknown plugin Research
Plugin Icon
RealJukebox NS Plugin
RealJukebox Netscape Plugin Unknown plugin Research
Plugin Icon
RealPlayer Version Plugin
6.0.12.775 Unknown pluginOkay, that's a lot of information. I think the key part for support purposes is this:
''TheDrive [[#question-1057777|said]]''
<blockquote>
Just try yourself. Setup new profile and work a few days or weeks on any theme(s). Do not close tabs (at least ones, which you wanna explore once more). If your PC has 2-4Gb of RAM you will notice FF stopped to save session info after you will have a 50-100 tabs opened (you'll see sessionstore.js or session-backups\*.js script files reached 15-20-30MB long and stopped to change and it's LastMod date/time(s) are frozen) ...<br><br>
... I've noticed FF started to hang more and more and checked previous.js, recovery.bak, recovery.js was last modified on Apr, 14 but today is Apr, 16! I've lost one more hour trying to save tabs, even installed Session Manager, promised session saving on user demand but after a half hour of action against hanging FF, plugin showed me that I have NO ONE tab to save. I've managed to copy a few URLs to the text file before FF have completely fallen.</blockquote>
You're not the first person to report that the sessionstore.js or recovery.js file stopped updating with new activity. However, it's rare enough that I can't recall whether we have gotten to the bottom of it in a previous thread. I'll see whether I can search it up.
Meanwhile, someone might be able to come up with a way to watch for problems and extract some debug information, but I'm not personally familiar with such tools. -
Premiere CC hangs on startup ' scanning audio plugins'
Having trouble with Premiere CC on a Mac. Installed and re-installed several times, deleting everything I could find.
Everything installed fine - but when I startup Premiere, it hangs on the 'scanning audio plugins'
Does anyone have the same experience and if so, is there a simple solution?
Thank you.Hi,
Please move all Items from the below mention folder location and empty the Folder
Main Hard drive->Library->Application Support->Adobe->Common->Plugin->7.0->Media Core
Once the Media Core folder is Empty then try to launch .
Also empty the Quick time folder from the below mention location
Main Hard drive->Library->Quick time
Move all components from the Quick time folder and empty the folder and then try to launch , it might fix the problem for you as it seems some plugins are causing the issue.
regards
Karandeep singh -
Opera 12.16 (build 1860)
Windows 7 Pro (64 bit)
SEVEN times ADOBE has asked me to install the latest version of Flash Player.
SEVEN times I have installed the latest version of Flash Player.
SEVEN times I have checked to see if it in the Plugins list and enabled.
SEVEN times it is in the Plugin list and ENABLED.
ALL SEVEN of them.
Being clever, I disabled all but one of them.
It still doesn't f***** work.
It still f***** asks me to install the f***** program.
Basic question:
Does this lauded, insistent, invasive (and apparently at the moment, USELESS) Adobe product WORK with Opera?
NOTE:
1. All extensions/plugins disabled/turned off: apparently the existence of a YouTube Downloader interferes with Adobe downloads. As does AdBlock, Ghostery, Facebook Redirect, Sociopath, TinEye, TS Video Player, and three of four other things.
PS: Even though I tell it I "DO NOT" want to install Google Chrome, why does it install Google Chrome (first time).
Even though I told "DO NOT" install Google Chrome, why does it look for it and decide it's already installed (second time).
But as a time-waster it's nice.
I got to uninstall Google Chrome twice.Why are you editing my "question?"
Is it because I said Flash for Opera seemed to patently USELESS (seeing as I've installed it SEVEN times and it still doesn't work)?
Adobe, thank you for the free stuff, but it would be nice if it worked and didn't need updates every thirty minutes. -
FMLE No Default Sound in Audio DropDown list
Hi im pretty new to FMLE,
Does anyone know how to get the Default PC sound to show up under the drop down list for Audio? The only the that shows is my USB Mic, but I want to live cast my PC sounds for my game that I will be streaming, not just my voice. I actually want to get both to play.FMLE only lists what your OS reports is present.
What you are looking for is called "Stereo Mix" and it is NOT enabled on soundcards in Windows by default. You need to enable it as a recording device: 1. Right-click on the speaker icon in the task bar (next to the clock)
2. Click "Recording Devices"
3. Right-click in the "Select a recording device" window (on white space)
4. Click on "Show disabled devices"
If your driver supports Stereo Mix you will now see it in the list. You can right-click it and click "enable". If your driver does not support stereo mix you will need to get an updated driver and install it. Note: usually the Microsoft driver does not include this support. Go to the soundcard manufacturer's web site (or motherboard manufacture if the sc is onboard) and download it from there. Then repeat the above process to enable Stereo Mix recording.
Now start FMLE and it should show up in the audio devices list. -
Since Volume Logic doesn't work anymore, and they don't seem to be in a hurry to fix it, does anybody know of any other good audio plugins for iTunes on Windows, please.
Help much appreciatedPerhaps SRS iWOW would be worth looking at.
Thanks so much for the help! I trialed the software and bought it after the third song! I'm very happy with it so far. Thanks again for the suggestion! -
Adobe reader plugin missing from firefox plugins list on redhat 6.1
Hello,
I'm having a problem with putting adobe reader 9 plugin installed on firefox 3.6.17 on redhat 6.1 (64bit)
(Not recreatable on redhat 5.4 with same versions of reader and firefox)
Even though nppdf.so appears in the directory /usr/lib/mozilla/plugins directory with 755 permissions,
when I start firefox, it is missing from the plugins list.
How can I ensure it is properly installed or what steps can I take to debug the problem deeper?
Thanks!!Thank you for your post miditt1.
1. A: When we run the script, we get a message saying that it failed but it doesn't say why - see below
2. A: It is not there in the about:plugins page
====================================================================================
./install_browser_plugin
This will install the browser plugin for acroread.
Enter the install directory for Adobe Reader 9.1 [/opt]
What do you want to perform ?
1. Global installation (as root) - this will try to install the plugin for mozilla/firefox, whichever it is able to locate.
2. Perform user-specific installation - this will install the plugin for current user only.
3. Exit
Enter your choice : 1
Trying to install plugin for browser - firefox
Installing plugin in /usr/bin/firefox
The plugin seems to be already installed. Are you sure you want to overwrite ? [y/n] y
Installation successful.
Trying to install plugin for browser - mozilla
Installation failed
Installing plugin in /usr/lib/mozilla
The plugin seems to be already installed. Are you sure you want to overwrite ? [y/n]
Maybe you are looking for
-
I keep getting the following email. It is Spam/Junk. It comes daily from different addresses so marking it as Junk doesn't work. Bouncing it back doesn't work - the address is not real apparently. How can I stop it? Has anyone else started getting th
-
I´m using a xml gallery with thumbs . I tried several things but can´t get it work. I want to add links in the textfield. The text in the textfield comes from a .txt file and xml file. I dont know if it´s possible to add links in .txt files or if the
-
Hi, I'm trying to use the counter function in my message mapping but I don't want XI to count +1 (so: 1, 2 ,3,...) I would like to count with 001 (so 001, 002, 003 ,004,...) but it doesn't seem to work. Is this possible with the standard mapping faci
-
How to open the hidden files in the macbook air?
Hi, I am not able to open the hidden files on my external disk. COuld you pleasee how to open?
-
sold my ipad today. the concern is how to access all info stored in cloud and if possible eventualy merge data into new andriod tablet. Thanks all of you who respond.