Waves plug in folder not found? Is there an audio plug in manager?

Hey folks, here we go with what will probably be a series of questions about Final Cut Pro- I just got and installed Final Cut Pro Studio today. I have version 5.1 on a Mac Pro listed below. When I boot up the program, it scans all my audio plug ins (I have many). I removed a couple that were demo's and am now held up on finding the Waves audio folder, although I think I know where it is (Macintosh HD->Applications->Waves->Waves Plug Ins) FCP doesn't allow me to select it, or anything in it.
I tried trashing the Waves preferences. No help there.
I also don't care about using this Waves thing, it's only a guitar amp simulator that I'll never likely need in FCP. So if no one knows about finding the Waves folder, is there a plug in manager like in Logic and other audio programs that would allow me to skip it anyway?
Thanks, Final Cut Pro forum people... I'm going to be learning this program soon, and will no doubt be on here from time to time with questions that I hope aren't too stupid. I can't find this in the four manuals at the moment, so if anyone has any ideas that would be great.

Was the audio line in good enough for most users, especially home users? Yes. Was the audio line in used by most professionals? No.
Keeping the analog signal as far away as possible from any potential source of interference is a good thing. Routing an analog cable over and around disks and power supplies and such can not have a good effect on the signal. Getting it digital as soon as possible can only help.
Conversely, I have looked at and tried quite a few of the USB & FW enabled audio devices out there in the market (including the iMic) and am not impressed at all.
Well you do get want you pay for
No where in my post did I say this was a good thing on Apple's part, I said it was a potential benifit (emphasis added). I too am sorry to see it go, I use it extensively on my personal machine for digitizing my record collection. At some point I will need to buy a new system and the cost of an external A/D converter will have to be added to the cost of the machine as will the cost for a DVD drive.
I do have to say however that this is the first time any post of mine has been called Balderdash, at least in such a lyrical way.
regards

Similar Messages

  • Application Support-Aperture-Plug ins folder not found

    I'm trying to install flash album explorer plug in. I'm trying to find Application Support-Aperture-Plug ins to innstall it but I'm not able to find it. I was searching in every library under user, system, and I haven't been able to fint it....please help!!!!!!!! I have Aperture 1.5.2
    MacBook Pro   Mac OS X (10.4.8)  
    MacBook Pro   Mac OS X (10.4.8)  

    DonCarlos, you have to create the folders if you do not have them. In Finder, follow the folders up to Aperture. This is where I had to create "Plug-Ins" and then clicked on it to open. Then created its subfolder "Export". I dumped the Flickr plugin here and restarted Aperture. Works perfectly.

  • I can not use CanoScan N670U with my Macbook pro. I download canoscan toolbox 4.1 from Cannon website. It keep saying "the scanner plug-in was not found". Please help

    I can not use CanaScan N670U with my Macbook Pro. I download Canoscan toolbox 4.1 from Cannon websit. It still keep saying "The scanner plug-in was not found". Please help

    There is a solution (I'm running Snow Leopard on a Core2Duo iMac, but this problem arose when I was running Leopard on a G4 PowerBook too).
    Problem:
    You download the OS X driver for the scanner from Canon's site. I already had the CanoScan Toolbox (4.1) stored on an external drive.
    You unzip the driver and run the VISE installer. After a search it finds your copy of Photoshop (and maybe even the CanoScan Toolbox), and you click to install on that/those location(s).
    You get a couple of error messages, which you click through.
    You restart your computer and try to run the scanner but you get an error that the driver is wrong or missing and the process will abort.
    Solution:
    BEFORE you restart, and with the installer package still open -
    1. Copy the Into_CFMSupport_Login & Into_CMPrefs folders to
    Applications : Canon Utilities
    Applications : Canoscan Toolbox
    and remove the prefix Into_ from each folder
    2. Check whether the installer placed N067U_Library.shlb into the top level (not User level)
    Library : CFMSupport
    and if it didn't, move it there yourself
    THEN restart, and try again. It worked for me (via Photoshop), but whether it will work for everyone, I don't know.

  • Moved Music to New Hard Drive - Required folder not found??? pls help

    Hello
    I have recently purchased a new external hard drive as my crappy Dell was full to the brim with music.
    I have moved all my music files over to the hard drive and re installed itunes.
    Now when i drag my music folder into the itunes library it updates but the shortly after an error message occurs that says:-
    'Itunes Libray music file cannot be saved. Required folder not found'
    Previously i have saved my itunes folder within my music folder?.
    Now everytime i close down itunes all my music has gone from it!??
    Any suggestions....sorry if being really ignorant..not too profficient on computers..
    Thanks in advance.
    Sam
    Dell PC Windows XP
    Dell PC   Windows XP  

    I think itunes by default looks inside you my music folder. In the itunes preferences screen there is an option to select a new folder to your library. Change the path to the music folder on your external drive. Make sure to always have the drive turned on before launching itunes though.
    You may also be able to replace the my music folder with a shortcut to the music folder on the external drive. This behavior may not work in windows though so I'm not sure.

  • Config sync:error: Folder is no longer part of the system data source or the folder not found

    This is the message I am getting when i try to configure synchronization through intellisync in all functions.  Any ideas?
    Folder is no longer part of the system data source or the folder not found
    JT

    jtwilcox wrote:
    Mail account is MAPI
    XP
    Outlook 2007
    thanks for your help so far!
    JT
    Hi...
    Based upon the folder error, my guess is the Desktop Manager is having difficulty determining your default mail client. I am not sure why but it is easy enough to redo a profile in Outlook just to test this. (Control Panel / Mail)
    Of course, I would backup my PST file prior to doing this and then create a new profile and import the PST file into the new profile. Once the profile is running and tested ok, I would again go to the Control Panel / Mail and set the default profile to point to the newly created profile. Then run the Desktop Manager and see what happens....
    H.
    +++++++++++++++++++++++++++++++++++++++++++++++++
    If successful in helping you, please give me kudos in my post.
    Please mark the post that solved it for you!
    Thank you!
    Best Regards
    hmeister

  • My ipad mini says to connect to itunes, and I try to restore it, but after its done extracting a message comes up saying that device is not found, is there anyway i can fix this? I don't care if i don't get my stuff back

    My iPad mini says to connect to iTunes, and I try to restore it, but after its done extracting a message comes up saying that device is not found, is there anyway i can fix this? I don't care if i don't get my stuff back, i just want my iPad restored to its starting settings.

    If everything else that you try fails, I would try using another computer. Since you don't care about saving any data, any computer that is running the latest version of iTunes might be able to restore the iPad. You could make an appointment at an Apple Store Genius Bar and they can do it for you.
    If that isn't feasible for you, try using a different cable, a different USB port. reboot the computer, and reset the iPad by holding down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen. Then try again.

  • Error 48: File or folder not found when using photomerge panorama - imac photoshop elements 10

    Any help is appreciated.  Followed the photomerge panorama instructions and got error 48: file or folder not found.....line 16 ...
    using photoshop elements 10 on imac with OSX 10.8.2
    Thx

    Have you recently updated your Operating system? Please try repairing permissions for your hard disk.
    Please check the help document to know more about repairing permissions http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html#main_Solutio n_3__Repair_Disk_Permissions

  • Type "purge" in Terminal and get:   -bash: purge: command not found   Is there another built-in command to clear memory leaks?   want to clear memory periodically

    I have 10.6.8.  When I type "purge" in Terminal I get:   -bash: purge: command not found   Is there another built-in command to clear memory leaks?   I have FreeMemory (works well) and considering FreeMemory Pro, to clear memory periodically, say every 20 minutes, or preferably when a threshold is reached, say when only 100MB is available.

    To get purge to work you need to install Xcode from Optional Installs on the 10.6 install DVD. Also be sure you install CHUD Tools with it.
    But running purge or anything like it is pointless if within a short period of time the VM just grows back again. Sounds like you need more RAM.
    Where are the memory leaks? Just because the VM reaches a certain size doesn't necessarily mean it's from a memory leak.

  • Says "ipod folder not found"

    Hi, I need help...I have an ipod and it has been working fine but all of a sudden when I try to upload new songs on it or try to play the songs on my ipod they dont play and itunes says "folder not found" what can i do to fix this?

    Hi susie73,
    Welcome to Apple Support Communities.
    You can find some additional steps to try in this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Have a great day,
    Jeremy

  • Install NW Developer Studio. Error:SDK Folder not found!?

    Hi All,
    I installed Java EE5 SDK(with JDK) and now want to install NW Developer Studio 2.0. The wizard ask for the Java SDK folder path and when I enter it gives an error message "JAVA SDK folder not found".
    I used this "path C:\Program Files\Java\Sun\SDK"
    Can anyone help ?
    Best Regards,
    Kushi

    Hi Kushi,
    NWDS 2.0 is released with SAP NetWeaver 2004 which runs on JDK 1.4. Another reason for this issue might be the space in the path "C:\Program Files\Java\Sun\SDK".
    Please install JDK 1.4 into a path without spaces and try again.
    Hope it helps!
    -Vladimir
    PS. Your question does not seem related to the Java EE 5 Edition of SAP NetWeaver, so I'm moving this thread to the NetWeaver AS Java forum.

  • Cannot Play Disc Folder Not Found

    I created a project in DVD Studio Pro 3 and it seems to play in all computers and players with the exception my trusty iMac G3 400 mhz special edition. Everytime I insert the disc I get a message that says "Cannot play disc. Folder not Found." Most commercial DVDs and one disc that I created is DVD Studio Pro 4 play fine. Anyone know why this happens?
    imac G5   Mac OS X (10.3.9)  
    imac G5   Mac OS X (10.3.9)  
    imac G5   Mac OS X (10.3.9)  

    You'll find in the General in your Disc settings, in the Inspector Windows (if you click in any empty space of your Graphic View, you'll get you disc in the Inspector window).
    In DVDSP Preferences, in Project settings, you can change the by default setting for new projects.
      Alberto

  • I upgraded to Mozilla 6 but found out there is no plug ins to support my AVG Surf Shield like the Mozilla prior. When do I expect one to be supported/added?

    I upgraded to Mozilla 6 but found out there is no plug ins to support my AVG Surf Shield like the Mozilla prior. When do I expect one to be supported/added?

    I upgraded to Mozilla 6 but found out there is no plug ins to support my AVG Surf Shield like the Mozilla prior. When do I expect one to be supported/added?

  • Mac OS X Flash installs, but plug-in still not found

    I've uninstalled the older flash (which wasn't working on several sites) and downloaded Flash 10.1. It downloads and seems to install fine - I get the message saying "installation complete" but I still get error messages on the sites that use it saying the plug in is missing. I also tried the Adobe test page and it says the plug in is not found.
    I'm really a newbie on the mac, so any help is greatly appreciated!!
    Thank you!!

    Hi folks,
    I have the same problem on my iMac. I downloaded and installed the program. Nothing (visible) happens....I also read the answer: to restart the computer...but the Flash-10 player is still invisible on my iMac, and the (hidden?) app. does not work. By the way, in my opinion, it' s odd that I don't see the Flash.app in my program files!?! What is the problem with all that ? Has anyone the ultimate solution? Thanks in advance!
    Harry

  • Cross Plateform Migration:Target Folder not found

    Hi All
    I am try to use Cross Plateform Migration Fnction to migrate Data to AD file server. and I have perform [Migrate Data and Trustees] to migrate "user to user", but the last step "Validate", it show "Target folder not found "....Ireview all steps I set...indeed I seem not set target file server path.
    But I do not which step let me could set Target File Server, By using Policy or which place ? Who could kindly tell me How to set Target File Server path ?
    thanks!!
    wyldkao

    wyld,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • "Digital Editions Ordner nicht gefunden" (Digital Editions folder not found)?

    Hi all
    I get the error "Digital Editions Ornder nicht gefunden" (Digital Editions folder not found) when I start Adobe Digital Editions and the books on my computer are not shown.
    Uninstall/reinstall didn't solve the problem. Any ohter ideas?

    Found the solution in another discussion.
    Installed this and it works.
    http://support.microsoft.com/?kbid=886549

Maybe you are looking for