WAVES plug ins not in mixdown- please, please help me!!!!

Hi. Im an experienced adobe user (been using it since it was cool edit). Im now using the latest Adobe for Mac on my MacBook. Heres the deal:
When I go to export a mixdown, any plug in that didn't come with Adobe (such as WAVES) DOES NOT SHOW UP ON THE MIXDOWN. They work just fine in the actual multitrack session, but then just disappear in the mixdown. Ive tried every way possible to mix the file down- time selection, entire selection, Export, Mix to new track- you name it- but the waves just aren't on the mixdown. This is driving me absolutely bananas- has anyone else had this issue? Can someone please help me? Im so desperate for an answer on this that Ill give you some free voice work if you can tell me how to solve this issue! Or send you flowers- something! H E L P M E!!!!!!

I'm not a WAVES user but I've noticed some Cubase users (on their forum) have experienced problems with WAVES plug-ins. It might be related. Have you contacted Waves directly? They should be aware of any problems and would be best able to help find a solution.
Good luck.

Similar Messages

Waves plug-ins not showing up in AU.

My waves plug-ins never shows up in logic 7 or 8. But it works as AU under peak and Cubase (under VST). Any solutions?

make sure you are using the latest Intel version, which is 5.9, as far as I know.

Waves plug-ins

Sorry, this is a question. I'm new to this forum....
When I open FCE all of my waves plug ins get loaded. This takes around 5 minutes and I also get netshell error messages with two of the plug ins.
Somebody else posted the same problem and was advised to move the plug-ins to another folder. I imagine that, like me. he needs the plug-ins for Pro Tools so this is not an option.
Can anyone please advise another solution?
By the way if I try to apply effects in soundtrack, I also get netshell errors and am unable to load soundtrack effects. I guess the problems are related.

I'm new to your Form but have the same issues with Waves plugins loading into FCE when I start it up. I emailed Waves and they rersonded with the solution to our problem. Waves doesn't support Final Cut Pro or Express.
This is what they said to do.
Go to:HD>Library>Audio>Plug-ins>Components> remove any Waveshell files that you may find there. This will allow FCP or FCE to launch withoput Waves Plug-ins.
If you use Waves in Logic, Peak or Spark you will need to place the Waveshells back in the 'Components' folder before launching the application.
I use Motu Digital Performer 4.5 and it works without repacing the Waveshells back in the folder. This is a fix for your problem. Good luck. Bob
Burch Tree Music Recording.

Waves Plug ins and Final Cut

I run Pro Tools on a Macbook Pro which also hosts Final Cut Studio. I am having a problem whereby on booting the program it crashes if the iLok isn't inserted but if the iLok is there, it takes forever to load - I mean forever - I am still waiting for it after about 10 minutes and am unsure whether it is going ot do it at all. It is just the Native Power Pack but there are a lot of impulse responses for the reverb it seems to be loading - the point is, I don't want to use Waves with Final Cut - I just want to import and edit some video quickly but this is causing me a bit of a headache - I am sure there is a simple solution.
Thanks in anticipation all you wonderful boffins
Matt

The solution is simple but but you might not like it ...
FCP is Audio Unit aware, and your Waves plug-ins are Audio Units and so are being loaded by FCP.
The only way to stop this from happening is to move the offending plug-ins out of the /Library/Audio/Plug-ins directory before you launch FCP ... of course, this then means you need to move them back in again before you use Pro Tools ... not too great :/
Manually, you could simplify this by creating shortcuts (aliases) to the folders on the desktop, so it would be easy to drag and drop between the two.
Or, if you're that way inclined, you could create an Automator action or AppleScript to do it for you.
Perhaps easiest would be to create two separate user accounts, one you use for Pro Tools and one for FCP. Install the Waves plugins in the Pro Tools user's ~/Library/Audio/Plug-ins folder, rather than the global one. Then just use Fast User Switching to switch environments.
Hope it helps
Andy
EDIT: Oh heck look --> http://www.audiofile-engineering.com/audiounitmanager/ this may be by far the better solution for simply switching plugin sets, you just need to create a separate set for FCP and Pro Tools, or just switch between None and All. Gotta be worth checking out as its free! Everybody loves free

Waves plug ins is compatible with logic x ?

waves plug ins are compatible with logic x?

Excuse me your name is Jan not Dan sorry ,got the 32 bit version it works perfect on logic pro 9 is there any chance to work at 32 bit in logic X ? thanks for your help rewards

VST plug-ins not loaded at all Snow Leopard 10.6

Hi
I am using abelton live, and install waves 7 (does support snow leopard 10.6), and I don't see any recognition whatsoever for VST in premiere cs5
if I go inside the package of the application , i can see the plug-ins folder, but where is the "user" plug-ins folder.
on a Mac the folder is in /Library/Audio/Plug-Ins/VST
this is not the location where premiere is looking to load the VST, in the splash screen you don't see it loading Waves plug-ins for example.
does anyone know why / how to truely enable VST on CS5 Mac?
thanks
Ami

Arri,
Usually, PrPro will survey most of the system, and load all VST's found. However, three things can happen:
1.) the VST is loaded and can be used by PrPro (not sure if this is the case with your particular VST)
2.) the VST is loaded, but PrPro cannot use it. There is most often a one-time message to this effect. The VST will NOT appear anywhere in PrPro.
3.) PrPro attempts to load the VST, but cannot. At this point, in later versions, a blacklist file is written, and each such VST will be added, when one launches. The launch will fail, until all such VST's are "blacklisted." When that blacklist has been completed, PrPro will launch fine, ignoring each of those problem VST's.
Just not sure about your particular VST. Does it say that it will work in PrPro? Not all will.
Good luck,
Hunt
PS - seems that there are a couple of threads on Wave7.dll, but do not recall the specifics. I'd suggest a Search of this, and maybe the CS4 and Earlier fora, and some reading.
Message was edited by: Bill Hunt - Added PS

Migrating PS CS3 to Intel with OS 10.5.6 Plug-ins Not Available

After migrating CS3 to MacBook Pro, 10.5.6, a list of unavailable plug-ins comes up. All except two were PS plug-ins, NOT aftermarket. Sure enough, they don't show up in the filters menu. I don't know where else they are missing. (migrated from Powerbook 10.4.11)
What is to be done?
CS3, OS 10.5.6/ MB Pro 2GB ram, 2.4 Ghz

Migrating is never a great idea, but migrating an application originally installed under Tiger on a PowerPC machine to a Mac-Intel box running Leopard goes beyond being a monumentally bad, horrendous idea. It's sheer lunacy!
You need to wipe out that drive, or at least use the Adobe Uninstaller (installed by CS3 in Applications/Utilities/Adobe/ on your old machine), look for, download and run the CS3Clean script, and then install the application from the original media.
Also, realize that any plug-ins that were not written in Universal Binary will NOT run under CS3 on the Mac-Intel machine,
unless you run CS3 under Rosetta software emulation with a corresponding
massive performance hit.
Never, ever try
"migrating" again. :(

I am using CS4. Can I open CS6 files? I am receiving "plug-ins not available on your system" messages and I'd like to open anyway but clicking on OK doesn't work.

I am using CS4. Can I open CS6 files? I am receiving "plug-ins not available on your system" messages and I'd like to open anyway but clicking on OK doesn't work.

InDesign CS4 can open .indd, .indt and .inx files from earlier versions, but not from later. It should, however, be able to open .idml files saved or exported from newer versions, with the understanding that unsupported features will be lost, text will probably reflow due to differences in texts engines between versions, and that the greater the gap between versions the more likely there are to be noticeable differences from the original. You will need to be sure CS4 is at version 7.0.6 to read the .idml.

Plug ins not indicating presets/number

Wondering if anyone may know what may be causing the preset selection on plug-ins not to show anymore. I'm getting this (_ _ _), instead of what used to be preset 01, 02, or 03 etc..... .I'm thinking maybe I need more ram, or the battery on my mac is running low, but I'm not sure.

In response to your questions
1. I did not install them. They were installed by CS4. (I have the CS4 premium production suite for Mac)
2. Correct.-- the project that I opened shows the plugin. And the plug-in is fully operational. All the parameters work.
3. Correct--. the plug-ins are not found in the Effect menu, nor the Effects and Presets panel but they are in the Plug-un Folder (see below). This makes me wonder how many more plugins I have that I cannot get access to. I realize that all of the features in the PSClassic and PS LE Classic are probably in the Particle System II, but using the PS Classic was easy and straight forward compared to figuring out all of the parameters in Particle system to get similar results.
Notice the date on the plug-in in the attached picture (Created 6/22/09)
If you have CS3 or CS4 you probably have these plugins in your folder also. The last copyright on the book is 2004.

Waves Plug-Ins and Audition 3.0

Has anyone else has problems getting Waves Plug-Ins to work with Version 3 of Audition?
Admittedly, I am using the demo to make sure everything work before I upgrade to version 3 [but that has never been a problem for me in the past].
I can only get half of my Waves Plug-Ins to work, and the other half says they are incompatible.
Does anyone have any ideas, because it is next to impossible to get help from Waves.
Thanks
Stan

I think all you can do is move them out of whatever folder there are in.

Final cut pro conflicting with waves plug ins

Hi, I'm a pro tools user and I have wave plug ins. These plug ins are automatically loading up in final cut when I first enter final cut.
What is happening is I click on final cut to boot it, it starts loading my plug ins, then it says that it cant find a couple of plug ins. Then it automatically quits, giving me no access to final cut.
So basically I cant get into final cut at all. I erased my plug in preferences and my final cut preferences, that did nothing. I booted with extensions off in safe boot mode, that still did nothing.
IS THEIR ANY BUTTON I CAN HOLD DOWN TO BYPASS LOADING THOSE PLUG INS WHEN I BOOT UP FINAL CUT SO IT DOESN'T CRASH MY PROGRAM SO I CAN GET INTO FINAL CUT AND TURN OFF THOSE PLUG INS?
Thanks.

If you have more than one waveshell, which may be the reason for your problem (like one that calls for plugs you don't have), the quickest solution is to drag all of them out of the folder (applications/waves/waveshells) temporarily. Then make sure FCP launches correctly (it should). Then put only the lowest numbered waveshell back in, and try again. This way you'll find which is the culprit, and can permanently remove it. I had this problem and used this solution successfully.
If you have only one waveshell, start by removing it to see if that solves the launch issue, which it should, then look at your plugins themselves (applications/waves/plugins) to see which might be the culprit. If there are any demo versions or ones you otherwise don't own licences for, remove them first and try relaunching FCP. You should eventually find the culprits and be ok.
Also, make sure your Waves plugins/waveshell are updated to the proper versions for your OS and Pro Tools versions. See the waves site for details on that.
Ted Spencer, NYC
www.tedspencerrecording.com

Soundtrack Pro crashes when I open Waves Plug-ins

I'm using Soundtrack Pro 3 to master audio i've created in Logic Studio. Waves plug-ins (principally, the Q-series eg plug-ins) cause Soundtrack Pro to freeze.
I've re-installed all plug-ins, but no joy. Should I re-install Soundtrack Pro? Does this mean wiping and re-installing the entire Logic Studio?

The workaround I used was to just export the whole thing without saving, and then reimport it into FCP. It works for this project, but it doesn't really seem like the RIGHT way that this whole operation should work!

Error message Plug-ins not upgraded, cannot open

A client sent me a CS3 InDesign that won't open. It says my plug-ins are not upgraded. It lists all the plug-ins and they
are features that already exist in InDesign such as preflight and collect. How can I get the file to open?

I cannot insert the screenshot .jpg's into my e-mail. So here are the messages:
Error message 1.)
CONDITIONALTEXT.RPLN
WORDREADY.RPLN
The "file.indd" uses one or more plug-ins which are not currently available on your system. Do you want to open anyway?
Error message 2.)
List of 21 plug-ins (many in this list are standard items in my CS3 InDesign such as preflight)
Cannot open "document.indd" please upgrade your plug-ins to their latest versions or upgrade to the latest version of Adobe InDesign.
InCopy is listed as one of the plug-ins. Does that tell you something? Let me know if you need additional information.
Thanks,
WZ
WZ DESIGN | 135 PROSPECT ST. | PROVIDENCE, RI 02906 | 401.323.4975
WWW.CREATIVESHAKE.COM/WZDESIGN

3rd Party Plug-Ins Not Listed Under Inserts

I have recently installed two 3rd party plug-in software - Stylus RMX and Kontakt 2. I installed the latest versions of the software that are compatible with an Intel based Mac. They appear under the library/audio/plug-ins/components but they do not appear under any of the headings in the Inserts tab.
Do you I have to reinstall Logic Express 8 after installing the plug-ins? Do I have to direct Logic Express 8 to the components directory. I have read all the manuals and I cannot find the solution.
Please help.

Thanks for the quick response. The RMX plug-in is in the Audio Units Manager. When I Reset and Rescan I get the following response which at the end is a pass, but the RMX plug in still does not show up in the Inserts tab.
Cabarete
Software response:
validating Audio Unit Stylus RMX by Spectrasonics:
AU Validation Tool
Version: 1.2.1b3
Copyright 2003-2007, Apple, Inc. All Rights Reserved.
Specify -h (-help) for command options
VALIDATING AUDIO UNIT: 'aumu' - 'Styl' - 'GOSW'
Manufacturer String: Spectrasonics
AudioUnit name: Stylus RMX
Component Info: Stylus Audio Unit.
Component Version: 1.6.1 (0x10601)
Component's Bundle Version: 1.6.1
* * PASS
TESTING OPEN TIMES:
COLD:
Time to open AudioUnit: 44.468 ms
WARM:
Time to open AudioUnit: 0.124 ms
FIRST TIME:
Time for initialization: 0.009 ms
* * PASS
VERIFYING DEFAULT SCOPE FORMATS:
Input Scope Bus Configuration:
Default Bus Count:0
Output Scope Bus Configuration:
Default Bus Count:8
Format Bus 0: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
Format Bus 1: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
Format Bus 2: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
Format Bus 3: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
Format Bus 4: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
Format Bus 5: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
Format Bus 6: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
Format Bus 7: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
* * PASS
VERIFYING REQUIRED PROPERTIES:
VERIFYING PROPERTY: Sample Rate
PASS
VERIFYING PROPERTY: Stream Format
PASS
VERIFYING PROPERTY: Maximum Frames Per Slice
PASS
VERIFYING PROPERTY: Last Render Error
PASS
VERIFYING PROPERTY: Instrument Count
WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/0], which should be invalid.
WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/1], which should be invalid.
WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/2], which should be invalid.
WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/3], which should be invalid.
WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/4], which should be invalid.
WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/5], which should be invalid.
WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/6], which should be invalid.
WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/7], which should be invalid.
WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Group/0], which should be invalid.
WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Part/0], which should be invalid.
PASS
* * PASS
VERIFYING RECOMMENDED PROPERTIES:
VERIFYING PROPERTY: Latency
PASS
* * PASS
VERIFYING OPTIONAL PROPERTIES:
VERIFYING PROPERTY Supported Number of Channels
PASS
VERIFYING PROPERTY Tail Time
PASS
VERIFYING PROPERTY Bypass Effect
WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/0], which should be invalid.
WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/1], which should be invalid.
WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/2], which should be invalid.
WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/3], which should be invalid.
WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/4], which should be invalid.
WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/5], which should be invalid.
WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/6], which should be invalid.
WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/7], which should be invalid.
WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Group/0], which should be invalid.
WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Part/0], which should be invalid.
PASS
VERIFYING PROPERTY Render Quality
WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/0], which should be invalid.
WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/1], which should be invalid.
WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/2], which should be invalid.
WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/3], which should be invalid.
WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/4], which should be invalid.
WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/5], which should be invalid.
WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/6], which should be invalid.
WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/7], which should be invalid.
WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Group/0], which should be invalid.
WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Part/0], which should be invalid.
PASS
VERIFYING PROPERTY Host Callbacks
PASS
* * PASS
VERIFYING SPECIAL PROPERTIES:
VERIFYING CUSTOM UI
Carbon View Components Available: 1
auvw StyM VST - Spectrasonics View
PASS
Cocoa Views Available: 0
DEFAULT PRESET: 0, Name: unused
auvaltool(714) malloc: * error for object 0x13d3f850: double free
* set a breakpoint in mallocerrorbreak to debug
HAS FACTORY PRESETS
VERIFYING CLASS INFO
WARNING: Preset name is not retained in retrieved class data
PASS
TESTING HOST CALLBACKS
PASS
* * PASS
PUBLISHED PARAMETER INFO:
# # # 74 Global Scope Parameters:
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
* * PASS
FORMAT TESTS:
Reported Channel Capabilities (explicit):
[0, 2]
No Input, Output Chans:
0-1 0-2 0-4 0-5 0-6 0-7 0-8
X
WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:1
WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:4
WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:5
WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:6
WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:7
WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:8
* * PASS
RENDER TESTS:
Output Format: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
Render Test at 512 frames
Slicing Render Test at 64 frames
PASS
Render Test at 64 frames, sample rate: 22050 Hz
Render Test at 137 frames, sample rate: 96000 Hz
Render Test at 4096 frames, sample rate: 44100 Hz
Render Test at 4096 frames, sample rate: 192000 Hz
Render Test at 4096 frames, sample rate: 11025 Hz
Render Test at 512 frames, sample rate: 48000 Hz
PASS
Checking parameter setting
Using AudioUnitSetParameter
Using AudioUnitScheduleParameter
PASS
* * PASS
AU VALIDATION SUCCEEDED.
validation result: successfully validated
updating properties of AU Stylus RMX by Spectrasonics...done.

Topaz Plug-ins not working in LR 4

Spent over two hours on the technical support chat line this morning trying to resolve this issue. In the end, the support specialist had to punt and escalated the case to a higher level. Not sure what that means, I haven't been notified by anyone at Adobe. I also notified Topaz Labs and they said some people are having the problem and some are not but they're looking for solutions. Adobe's opinion was that it was Topaz's issue to deal with but after reading the plethora of posts I'm not so sure. I'm running Mac OS 10.7.3 and that seems to be a common thread through a lot of what I read. I don't get the impression that Adobe is listening to their customer on this one. Otherwise their support specialists would have been all over this. Sigh....guess I'm waiting for a patch from someone...maybe.

I had the same problem with LR4 and plugins from Topaz. I have PS3 and am not interested in downloading PS5. Here is what I sent to Topaz and their response:
I followed instructions for removing old versions of Fusion Express and reinstalled. I purchased two plugins as well today,Topaz Adjust and Star Effects. When I attempt to edit photo in Lightroom 4 by selecting a photo, then choosing Photo, edit in, Fusion Express2 64bit, I receive the message Unexpected error performing command: bad argument #1 to \'lower\'(string expected, got nil). I have 6GB of RAM on a Dell N5010 laptop with an Intel i5 2.53Ghz processor, using Windows 7 64bit.
Response from Topaz help:
Hello,
It seems that the issue with Plug-ins and there compatibility is on Adobe's end, and supposedly they are going to be releasing a new version on LR4 that is compatible (a 4.1 version) asap.
Please see here for more info: http://feedback.photoshop.com/photosh...
Let me know if you have any other questions.

WAVES plug ins not in mixdown- please, please help me!!!!

Similar Messages

Maybe you are looking for