Waves plugins broken in L9.01

Select multiple channels in the mixer. Add a waves plugin and it only loads one channel. Niiice...

Waves 5 here, just some of the older plugins (eg Renaissance Comps, Doubler etc). They are all working as before, so maybe it's a V6 thing, or something specific in those newer Waves plugs.

Similar Messages

  • Os 10.4.6/logic 7.2 pro user - trouble installing Waves plugins

    on trying to install waves plugins i fall at the first hurdle - actually installing the files to the machine!
    help
    thanks
    dual g4   Mac OS X (10.4.6)  

    I had problem with certain waves plugins when upgading from 10.4.5 to 10.4.6, although not the same as you described.
    Anyway there is a thread over at the waves forum which advises against doing the update path i had chosen from the software update. I dont know if this is what you done?
    You need to reinstall the combo update 10.4.0 to 10.4.6 over the existing one.
    Heres the thread:
    http://forum.waves.com/cgi-bin/yabb/YaBB.pl?board=soft_mac;action=display;num=11 44255359
    And the update link below. Hope that helps....
    http://www.apple.com/support/downloads/macosx1046comboforppc.html

  • Waves plugins doesn't work with the new Logic X?

    All of my Waves plugins included in the Complete V9 bundle doesn't appear with the "upgrade" to Logic X. Even I re-installing the plugins Logic X seems to ignore them...
    Someone with this problem? Anyway to solve that?

    AndersonPiah
    For Waves v9 64bit version..
    Did you also run  the Waves AU Reg Utility 9.2 or later.. found in the applications/waves/waveshells folder?
    If not, quit LPX and run the AU reg util.
    Then, restart LPX and V9 should then be validated correctly and available in LPX via the Insert FX slots.
    Waves V9 working fine here with LPX and 10.8.4
    Salvarado,
    As zbaig stated, you need to update to Waves v9 64bit... as v8 was 32bit only and is no longer supported within Logic Pro X

  • Waves plugins crashing AU scanner on load

    I just bought musicians bundle 2 for waves plugins. When logic scans for AUnits it says AUVAL closed unexpectidley. If I open the AU manager it says it shows the waves plugs but they are greyed out. in the comment coloumn it says crashed loader. What does all this mean? Logic xpress 7.1.1 on a G5 imac.
    The plugs do not show up once logic has booted.

    Make sure you download the latest version of the Waves plugins, and properly authorize them.

  • Just bought a new MacBook Pro. Would like to transfer my Waves plugins from My old Hard Drive into my new MBP. IS there s simple way to do this?

    Just bought a new MacBook Pro. Would like to transfer my Waves plugins from My old Hard Drive into my new MBP. Is there a simple way to do this?

    Hi
    The easiest and most reliable way would be to download the installer from Waves and re-install.
    CCT

  • WAVES plugins crash AUVAL since OS & ProAPP 4 update

    I just did the OS 10.4.9 update that came out a few weeks ago, and then did the Pro App 4 update as well. Now when I launch LOGIC, I get AUVal crashes on my WAVES plugins as it's scanning (says it's missing Netshell hardware -- but I never had any hardware). I tried deleting the Project Manager data, and also did the permissions repair after installing, but nothing will work.
    Has anyone encountered this yet, and even more importantly, has anyone found the fix?
    Kerry

    Hi Kerry.
    Your a few weeks late for the "Waves doesn't work after OSX update party." LOL! Did you update the OS using Software Update? If so, try downloading the combo updater for 10.4.9 and updating that way. If that still doesn't resolve the issue, just force the Waves plugs to validate. They'll work fine.
    The reason this is happening is Apple changed the AU validation process in the last OS update and Waves didn't (did they update their stuff recently?) have an update ready for the new validation process in 10.4.9.
    Hope this helps.
    X

  • Wave plugin problem

    a few of my waves plugins from Platinum bundle don't get recognized. i ran AU scanner in logic and about 8 plugs don't work. they do NOT pass verification. IR-1, L3 ultramax, some stuff like that, but all hte other platinum bundle plugs wrk great. i noticed something after reading here:
    my waves Authorizers folder in Waves dir., i ran all Waves AU reg utility. app's. one of them says "Could not find
    Waveshell-AU-5.0.component" in (library/audio/plugins/components). i read that if they said "found 0 plugs" then i should delete any left over waveshell files, but i have reverese problem...i seem to have a missing waveshell file.
    so, how do i get the waveshell file there? i have no idea where the heck it came from?
    thanks

    i have 4 waveshells in components directory. when i authorized them, they all seemed to recognize a chunk of plugins. you said i only need one, but what about the others that recognize plugins? i have version 5.01, 5.2 and a few more higher.
    i bought the platinum bundle 5 months ago or so. which exact version should i have of wavesshell for my small percent of plugins to work.
    is there a chance that platinum comeos with a few plugs (the L3 maximizer) which are demo and don't work? i just feel weird deleting all wavesshells when i run the autrhoizer utility as someone mentioned and all 4 of waves shells recognize a certain amount of plugs.
    man, why do they make this stuff so complicated

  • Why does cool edit pro saying undefined external error when i try to preview my waves plugin

    please help

    Cool Edit Pro as far as I recollect could only use Direct X audio plugins. Perhaps your Waves plugins are VST which Cool Edit didn't support.

  • Waves plugins GUI messed up now, anyone else ?

    When waves plugins are used now, the GUI is messed up. Major parts of the graphics are missing. The plugin opens and even process audio but impossible to edit parameters graphically. The waves plugins work famously with Logic Pro 8.01. Not sure if this is a result of going to 10.4.11, or the last PPC pro app software update, or both. Any solutions out there ?

    I too am experiencing this problem. I have reloaded Logic and the latest Waves update, and have not had any change in the GUI appearance. Has anyone been able to correct this problem. I am told that I can't go back to a previous OS without reloading the works, which in my case includes numerous authorizations etc. Yikes! Strangely, the Waves plugins are fine in Logic. What the....?!

  • GarageBand 6.0.5 Wont load my Waves Plugins

    Hey guys, My specs.
    10.6.8
    Am using waves plugins V9.r13
    I have reinstalled GarageBand and it doesnt seem to fix the problem.
    When i unistalled the plugins garageBand Worked, But when i reinstalled them same thing happend again.
    These are the errors i get.
    An error has occured with an installed Audio Unit Plug-In.
    GarageBand unexpectedly quit while trying to use the Audio Unit “IR360 eff discrete (2->5)” by “Waves”.
    This plug-in may require an update.
    Then in that same window it gives me the option to hit OK.
    Then i hit Ok,,
    The next message,,,
    Scanning Audio Units.
    GarageBand will now scan 347 installed Audio Units plug-ins. This may take some time. This scan only occurs the first time you open GarageBand or after installing new Audio Units.
    Then it also gives me the option to hit OK.
    The i hit Ok,,
    And then the initializing window box just stays eternally,, And garageBand crashes,,, Where can i get the update for my waves v9r13 plugins????

    Thomas,
    what does the Activity Monitor show? The Activity Monitor is in "Applications > Utilities" (Programme > Dienstprogramme, if you have a german system).
    Lauch it and check, if GarageBand is actually processing and using memory, or just hanging. Do you see many disk outs?
    Are there any error messages/diagnostics relating to GarageBand in the Console Window? The Console Utility is also in "Applications/Utilities".
    Sometimes programs that need a lot of memory will be very slow, if your system drive is filling up. How full is your SSD system drive?
    Regards
    Léonie

  • Waves Plugins not showing up in Logic 9

    I installed waves plugins AU and VST but they are not showing in Logic. They show up as VSTs in Ableton but i can't see them in Logic tried using AU manager but still couldn't figure anything out. I really need some of the plugins especially the API compressor and eq and the multi-maximizer. What could i be doing wrong?

    i figured it out! i had to run the au reg utility. after i ran it the plugins showed in logic.

  • Waves plugins in Logic Pro 7

    How do I get waves plugins to run with logic? I moved the component into the plug ins folder, but still no love.
    many thanks

    solace80 wrote:
    How do I get waves plugins to run with logic? I moved the component into the plug ins folder, but still no love.
    many thanks
    Hi,
    You need to install them properly. simply moving a plugin component of Waves plugins, is not the way to do it.
    1.- Download the lates version (especially if you're on Leopard)
    2.- Install the correct plugin package from the installer (it will ask you what to install)
    3.- Follow the instructions.
    4.- you will at the end of the installation automatically run the Waves AU utility, which registers the plugins you installed as AU versions, and installs the correct component in the right folder.
    5.- Authorize the plugins. Either get a demo key for your iLok from waves, or the permanent licence, again for the iLok.
    Cheers

  • Waves plugin in logic

    I having trouble getting my waves plug-ins to show up in logic. They show up in live and protools. Do I have something in the wrong place do i need to move something. Thanks for the help.

    It depends. There are an awful lot of Waves plugins, and a lot of Logic ones.
    I really love the Waves Ren compressor, and Doubler, for which Logic has no equal. Other stuff like Supertap isn't particularly better than the Logic delays.
    But then Waves do some really nice stuff, like the SSL stuff, the guitar modeller, and more exotic stuff.
    So yes, in general I would say the Waves stuff is on a par with the Logic stuff at worse, and much better at best.

  • Flickr plugin broken

    As with the Facebook plugin, and discussion here: http://forums.adobe.com/message/4854227  the flickr plugin (and anything that writes to the temporary area) are broken on Windows 7, at least since the latest Windows update.  The plugin crashes because it can't write temporary files to the drive.  I am running Lightroom 4.2  and Flickr Plugin 4.2.0.850741.  Instead I installed Jeffry Friedl's Flickr plugin as a workaround, which does not have this issue (http://regex.info/blog/lightroom-goodies/facebook).
    Adobe, please look at this!

    Also, I used Microsoft's Process Monitor to track which files were written when I published a 1-photo collection to Flickr:
    These are exactly the directories and files you'd expect, which suggests something very curious on your configuration.  A screenshot of the error message might produce more clues.

  • Waves plugins in Premiere CS5 (Mac) not loading.

    I have the Waves "Masters" plugins and would like to use them in Premiere CS5 for Mac. Problem is that they do not load.
    Here's what the "Plugin Loading.log" file says about it:
    Scanning /Library/Audio/Plug-Ins/VST and sub-directories
    Loading /Library/Audio/Plug-Ins/VST/WaveShell-VST 8.0.vst
    The registry tells us to cache so the plugin will be loaded from the cache.
    The plugin is marked as Ignore, so it will not be loaded.
    What does this means?

    I don't know anything about Waves "Masters" plugins,
    but if they're not 64bit versions they won't work.
    Waves "Masters" plugins 64 bit

Maybe you are looking for

  • Mail Not Sending, No Advice Working, Lion Mail Settings Mixed Messages

    I've tried all the advice I've seen on this issue. One thing that applies to me that I don't see mentioned elsewhere, is that while all the servers show Offline in Mail/Preferences, if I go to the Mailbox dropdown, it will show Take Accounts Online a

  • SOAP SENDER - test in soapui

    Hi I have SOAP sender. my user has created a wsdl and provided this to me. I have uploaded this in ESR and done a SOAP - PI - abap PROXY scenario To test this scenario, should I download the sender agreement and consume within SOAPUI and proceed the

  • Java with sql statement

    String SQL="Select * from table1 where table_date between '2002-1-22' and '2002-2-23' " ; rs=stmt.executeQuery(SQL); rs.next(); but it return no record ( it must have record) what's the problem? thank you

  • DME Dowload file error "FILE SPECIFIED IS EMPTY"

    Hi Guru, I have run  Payment program and i have generated payment medium for flat file also done all the config settings to generate Payment medium.It has created data medium for the payment run and found the entry. When give download in DME admistra

  • Info Record Text to PR

    Hi All, Can anybody tell me the logical reason why we cannot define the text linkages from PURCHASING INFO RECORD to a PURCHASE REQUISITION in standard SAP? I mean the text cannot be copied from an info record to a purchase requisition. Why?