Waves Plugins not showing up in Logic 9

I installed waves plugins AU and VST but they are not showing in Logic. They show up as VSTs in Ableton but i can't see them in Logic tried using AU manager but still couldn't figure anything out. I really need some of the plugins especially the API compressor and eq and the multi-maximizer. What could i be doing wrong?

i figured it out! i had to run the au reg utility. after i ran it the plugins showed in logic.

Similar Messages

  • Plugins not showing up in logic 9

    I just downloaded OS X Lion to my Mac Pro and am using Logic 9.1.6.  I have previously purchased two plugins that work within the OS but are not showing up as plugins/virtual instruments in Logic.  So I checked the AU Manager and both of these virtual instruments have a check in the Logic box, but not the Nodes box.  The two plugins are Native Instruments' Akoustik Piano and Submersible Music's Drumcore 3.  Both are 32-bit plugins, but I'm running Logic as a 32-bit application.
    I have checked both of their websites and they say the software will work with OS X Lion.
    Thoughts?  Direction?
    Thanks!
    Kevin

    The Node should be unchecked, 3rd party instruments cannot node, so that's normal.
    If you clickhold the I/O slot of a Software Instrument Channel, the piano's should show up in the Native Instruments folder, and the other one should probably be in the Submersible Music folder.

  • AU pro 53 is not showing up in logic

    Hi !
    AU pro 53 is not showing up in logic audio instrument chanel...
    Its only plays as a stand alone, outside of logic.
    Maybe I have files to drop in a certain folder in order to make pro 53 work as a plugin AU
    thanks

    Must be UB or the standalone version would not be there either I think.
    No, if it's PPC, the standalone will still work because OSX will run it under Rosetta (albeit slowly, but invisibly).
    The plugin won't show up, because it needs to be Intel code to work on Logic running on an Intel machine.

  • Wave 294 not showing in central manger ver 5.1

    FROM WAVE able to ping cm but not showing in cm dashboard
    Sent from Cisco Technical Support Android App

    Hi,
    With 'not showing' do you mean: not visible at all or not active and alive?
    What happens if you try a deregister force on the wave and try to do an identity recovery afterwards?
    Best regards, Peter

  • Adobe Flash Plugin not showing up in Finder

    Very frustrated here. I have installed and uninstalled the latest version of adobe flash trying to get it to work on OSX 10.7 and it's just not showing up in my plugins in Finder. What is going on? I can't watch video content or other flash on this Mac at all.

    1.  Enable Plug-ins
        Safari > Preferences > Security
        Web Content:
        Click in the box for "Enable Plug-ins".
    2. Check  whether you are currently  in  YouTube HTML 5 trial.
         http://www.youtube.com/html5
        At the bottom  left of the page  uncheck the box for
       "You are currently in the HTML5 trial".
    3. Reset Safari.
        Click Safari in the menu bar.
        From the drop down select "Reset Safari".
        Uncheck the boxes next to all items.
        Check the box next to "Remove all website data".
        Click "Reset".
    4. Turn off Extensions/Plug-ins if any that may interfere with Flash working properly.
        Safari > Preferences > Extensions
    Best.

  • Plugins not showing up

    I've got EZDrummer showing up as an AU, but cant get Amplitube & Trilogy to work. I installed AU versions, deleted cache, removed preferences, etc. Nothing. Any ideas?

    Trilogy is not a Universal Binary plugin, it is a PPC plugin, and therefore cannot be used natively on Intel Macs.
    Contact Spectrasonics for a tedious, unreliable and annoying temporary wrapper solution until they get the next version of Trilogy out.
    I assume you are also using an old, PPC-only version of Amplitube, which is why it's also not showing up. Contact IK for a UB update.

  • Orchestral Template NOT showing up in Logic - on start! Ideas? Help?

    I have the Orchestral Jam pack installed (MBP) but not all of them.
    Am I missing something? The jam pack is installed but does not show up in my LOGIC TEMPLATE.
    Help, GREATLY x 100, appreciated.
    Thanks
    It does show up in loop browser but no templates, if missing a file can someone send? Is it on one of the discs?
    Thanks (what would I look for (templates).

    Yup, just talked to Apple, will have to do the update again, or I could come in the Apple Store and copy the files from them, (which is why I asked) and will do if know one sends. The should be small, and on disc one, it doesn't list the templates, so would need to get Pacifist in which case from what I understand, if you don't know what you are doing you can make a real mess of things.
    Thanks

  • Audio wave form not showing up properly in Viewer (FCP 7 running Lion)

    For some reason when I bring in my audio timeline into the Viewer to see the wave form it does not show up accurately.  I used to be able to pull it up and fairly easily see each location we hit the clapper.  Now the clapper spike does not show up until I zoom almost all the way in on the wave form.  That's a TOTAL PAIN since you only see a few frames at a time.  Not good when you've got a couple of hours of audio on that time line with 30 or 40 clapper locations to find.  It's funny, it shows an actual flat spot until you ZOOM WAY IN on it, then you see the spike.  This seemed to start happening shortly after installing Lion.  I am not for sure that's what is happening, but has just never happened before.

    Have you trashed your preferences?
    If you use Preference Manager (free) from Digital Rebellion, you can save you current preferences before trashing so you can restore them if you wish.
    http://www.digitalrebellion.com/prefman/
    MtD

  • IMovieHD6 Plugins Not Showing in Program

    I just downloaded and installed some free plugins from geethree.com. I installed them as I do any other program but they are not showing up in iMovie HD6. I checked to see if by chance they appeared in iMovie09 but they don't (and shouldn't). Can anyone help?

    Okay, after closing and reopening iMovie, they show up

  • Why is my midi data not showing up on Logic Pro X?

    So i've been working on this project for a while now and for some reason out of no where the midi data is not showing up. every time i click on a region, it doesn't open up the midi data for that track, but instead only opens up the data for a different track. No matter what region i try to open, it always goes to that one specific region, and if i try to click in notes it only puts them in on that region. furthermoer, the MIDI draw refuses to work. it will not let me pitch bend, change note velocities, or anything. Am i missing something obvious or what?? please help, this is one of my favorite projects so far and I don't want to trash it because i can't do anything with it.

    Just happened to me. Then realized that I had clicked the "link" button off in the Piano Roll Editor and clicking it back on fixed it.

  • EWQL Storm Drum and Bias Soap =NOT SHOWING UP in Logic??

    I looked in Audio and sure enough it was there in plug ins.
    Any idea?
    Tried both audio and instrument tracks, both sends and inserts.
    Thanks.

    Thanks, but so far:
    • EZDrummer
    • Bias Soap
    • Storm Drum do not show up.
    Out of all of them, really need Storm drum to show up.
    Thanks

  • Plugin GUIs not showing up in Logic Pro 8

    Eg Multipressor only shows settings sliders....no interface view.
    Any ideas?
    Cheers
    Sty

    Stuart Duncan3 wrote:
    Eg Multipressor only shows settings sliders....no interface view.
    Any ideas?
    The View dropdown?

  • How can I get my installed plugins to show up in Logic after ive installed the plugin discs? ive tried changing the bit mode. it STILL doesn't work.???

    I tried installing a program but when i open logic and scan the audio units, it doesnt come up. Even if i change the bit mode, it still doesnt show up. I even tried restarting my machine..Can anyone help me or give me some ideas.
    i just wanna get this plugin to work.

    Have you confirmed that the plug-in installed to one of the locations where Logic might find it? Most plug-ins go to /Library/Audio/Plug-ins/Components. Some (rarely) install to ~/Library/Audio/Plug-ins/Components (where "~" is your user folder). Look in both locations and see if the plug-in is actually there.
    When installing plug-ins, if you are offered options as to what format to install, be sure to include Audio Units. Logic will not see other formats like VST, RTAS, AAX, TDM, etc. If you use other software that recognizes those formats, it's fine to install them too, just be sure you don't deselect Audio Units.
    Finally, if you're sure the plug-in is installed to the right place, open the Audio Units Manager in Logic and check to see if the plug-in passed validation. Go to the main menu and choose Logic Pro > Preferences > Audio Units Manager. Check to see if your plug-in is listed there. If there's not a check mark next to it in the "Logic" column, that means it failed validation. If so, the "Compatibilty" column will tell you why. Keep in mind that if the AU is 32-bit, you have to launch Logic in 32-bit mode to see it here. Likewise, 64-bit plug-ins show up in the manager in 64-bit mode.

  • Ableton live is not showing up in logic express

    I'm trying to rewire Live into Logic Express. Following directions in help...
    I start Logic.
    I start Live
    I create an audio track.
    I go to library tab where I see "Reason" but no "Ableton Live"
    Any ideas why? How to make Live show up?

    Must be UB or the standalone version would not be there either I think.
    No, if it's PPC, the standalone will still work because OSX will run it under Rosetta (albeit slowly, but invisibly).
    The plugin won't show up, because it needs to be Intel code to work on Logic running on an Intel machine.

  • Export Presets for Plugins not showing when a "-" occurs in the pathname

    Hi,
    I thought I might post this here in case some users are perplexed when a plug-in is installed but doesn't show in the "Export with Preset" panel. A couple commonly affected are ColorChecker Passport and HDR Efex Pro 2 (well these are the ones I use).
    Typically is is because the User Name for your PC (Windows) has a "-" in the name and the only way to fix it is to move those plugin directories out of the Lightroom/Modules entry to a Root Directory without a dash in the name.
    What really annoys me about this is that I reported it to Adobe as a Bug over a year ago at the following link and there was never any acknowledgement:  http://feedback.photoshop.com/photoshop_family/topics/export_presets_for_plugins_not_showi ng_when_a_occurs_in_the_pathname
    Really this is not the level of professionalism we expect from Adobe!
    Anyway this may help if some people have come up against this issue,
    Don.

    biblio wrote:
    Hi I am using Sun's JSF implementation on WAS 6.1. I have hard-code rendered="false" for a component in my jsp, Now on server side, even if I set setRendered(true) for the component, it does not reflect on screen. Any idea?When exactly do you do that? Sounds like you're doing it after the render response phase, which is already too late then.
    Also, why hardcoding and doing it the hard way instead of using a bean property? E.g. rendered="#{bean.show}" or so.

Maybe you are looking for