Way to change speed of entire Project easily?

Hi, I know how to change the speed of an individual clip in the timeline - but is there an easy way to change the entire speed of the project? Thanks.

Hi, thanks guys - that worked - although it seems when I change the speed of the nested sequence and export it the quality is quite a bit worse (exporting it with the same settings) - seems to be a lot of jagged edges now. Is there something in the 'Change Speed' window that should be changed? I am creating a sequence and doubling the speed and another sequence exported with 4 times the speed. What is checked in the Change Speed window is 'Frame Blending' and 'Scale Attributes' (the default settings). Any ideas how to get rid of the 'jaggedness' that is being created? (this file was originally a .dv file - a regular export to quicktime from regular speed sequence looks fine. Thanks.

Similar Messages

  • Quickest way to change speed but not clip duration

    I'm trying to determine the fastest method for changing the speed
    of a clip already in the timeline, but not the clips duration. Primarily, slowing a clip down.
    The best I've come up with so far is to put the timeline playhead over the
    clip and hit X to get the clips IN and OUT points placed in the timeline. Then,
    drag the clip into the Browser, effectively making a copy of it there. Then bring the clip into the Viewer, then hit APPLE J to bring up the speed change window, affect the change, then overwrite the change you've made in the viewer back down into the timeline where you placed the original IN and OUTS. Seems like alot of step.
    Is there a faster way? Any change I try to make in the timeline itself results
    in a clip duration change. The only other way I've found it to use the time remap tool put that is even more complicated and is alot less exact when trying to make something, say, 50% slower.
    Any input would be appreciated.

    Another, close but not quite there method I've tried is the TIME REMAP tool
    that lives with the SLIP AND SLIDE.
    I can affect speed changes, and see what percentage speed change I'm
    trying to make, but it wants to change speed on both the left and right side
    of the clip. In other words, I can't place the timeline playhead or Time remap tool at the beginning or end of the clip and only effect the speed of the entire
    clip unless there is no clip adjacent to the clip I'm trying to change.
    Otherwise it changes the speed as I want for 99% of the clip and then during
    the last several frames I've accidentally sped up up those frames. I can't position it to just change the speed for the entire clip.

  • Best way to change speed of clips

    Hey, I want to change speed of clips, both faster and slower in one clip. What is the best way to do that preserving the quality? I am still learning FCP so my apologies, and I had a hard time finding anything on here through search.

    Jerry's right...
    Take a look at this:
    http://homepage.mac.com/captmench/SlowMo3.mov
    Two frames each of FCP and Shake at 50%. Use your arrow keys to go frame by frame. First frame is normal, second is interpolated. Look at the background!!
    Creative cow should have the whole tutorial online soon... I'll post back with the link when they do.
    Also, for time remap -- shake's got that under control too... but for now, look at this:
    http://www.proapptips.com/proapptipsvideotutorials/879F6B61-CFF9-4FD1-8D43-FDF89 605611A/D95A1854-BE2C-46A6-A064-FA0A2306E254.html
    Good luck,
    CaptM

  • Adjusting Speed On Entire Project

    How to slow down entire project that contains 40
    slides by a factor of 4

    Hi Paul (and with Rick's permission
    There is a tool on the Captivate exchange that allows a user
    to adjust the playback speed to suit them as needed. You can access
    that exchange from the link below and then find and download the
    widget.
    Click
    Here
    Works great

  • Any way to change speed of a clip in "over-write edit" mode?

    I want to change the speed of a clip in the timeline without having to lock all the other tracks or having to move the other following clips out of sync. For example I have a clip which lasts for 1 sec, which I want to change to 3 secs. Normally when I do this in the timeline the other clips on the same video tracks which follows, will move their position..... How to change speed in "over-write edit mode"?

    I think it's even easier to just match frame the "source file"... put your playhead on the clip you want to speed change in your sequence. Then type optioncmdf. Perform the speed change in the Viewer, then simply cut it in... Might help to put it up above the older, use the double arrow selection tool facing right to move the clips past this change later... pull the upper track speed changed clip down over the old, and viola.
    Gotta say though, it's a lot easier to perform the speed change in the Viewer, and edit it all in as you go rather than doing it after you've put the clip in a sequence. (not always possible to determine what the speed change should be maybe, but sure easier.... FCP 7 handles this problem a lot better for sure, and worth the upgrade price if your machine is compatible.
    Jerry

  • Changing SPEED to entire timeline

    I know how to change speed on an individual clip but how can I do it to all of my clips on my timeline? thanks in advance

    Select the clip with the speed change. Copy it. Select the other clips and use paste attributes.

  • Any way to change speed of a clip without changing the pitch?

    When I do the command-J and lower the speed, the pitch lowers which I do not want.

    I don't think that's possible.
    Think about it: when you slow down sound you are also slowing down the frequency of sound, making it sound lower and slower. The only way to slow it down and not change the pitch would be to take little sections of it and keep them apart from each other over a long period of time. However, this would not sound like your original audio file.
    I don't know what you are looking for. Can you imagine a way in your head to slow down the audio, but not make it change pitch?
    The only thing I can think of would be to slow it down normally, then try to correct the pitch using one of FCE's audio filters.

  • Change Resolution of Premiere Project?

    I've been editing a project at a draft resolution of 864x486.  .  The final res is going to be higher.
    In the video settings for a given sequence, the resolution is not editable, nor do I see way to change res in the project settings.
    Is there a way to change the res of my current project?
    Thanks much.

    There is no draft resolution presets in premiere. There is only the dynamic preview quality settings that can be adjusted in the source and program monitor.
    You can copy all of your clips and paste them into a sequence that is the proper size, then make adjustments to individual media assets accordingly. Or you can drop your "draft sequence" in a proper format sequence and see what happens, it won't be good I'm afraid.

  • Is there a way to change the master text length in FCP? The default length is 10 seconds, which is too long. I can easily adjust the length but I don't want to do it each time, and I don't want to adjust one and then have to copy and paste this length.

    Is there a way to change the master text length in FCP? The default length is 10 seconds, which is too long. I can easily adjust the length but I don't want to do it each time, and I don't want to adjust a text clip and then have to copy and paste this each time. Ideally, there should be something in User Preferences but there is not. Thanks.

    Maybe some one else can pipe up with a solution, but this would literally take 2 seconds to do for a new project.  And you can create a "template project" that includes this "text" clip.  Save this project and then to a get info and check "stationary pad."  When you double click on this file, fcp will open with a copy of this project and you just need to do a save as. 
    I've been working with computer editing systems for longer than i can remember and at a certain point you just have to adapt your workflow to the limitations of the software.  

  • Best way to change the speed of a sequence of linked short clips?

    I have a sequenced project of about 150 short 1 second clips linked together via a crossfade transition... I would like to make the timelapse faster. What is the best way to change the speed of the sequence or the clips themselves? I would rather change the sequence for it would be less labor intensive I would imagine!!
    Thanks
    RD

    Or...select all the clips in the timeline, control-click (or right-click) on them and select 'Duration'. Change the duration to whatever will fit/fill the timespan you need, then hit OK.
    If you're needing to change the dissolve as well, you should remove all but one of them first, then drag the remaining transition into the browser. Dbl-click it into the viewer, set the duration of what you want, then use the hand icon at top right and drag it back into the browser. Rename it relevent to it's new duration, then control-click on it and select "Make Default".
    Now, set an inpoint at the first frame of your clips in the timeline, then drag all the shortened clips from the timeline into the canvas and release where it says 'Overwrite with Transition'.
    That's another way to accomplish this.
    K

  • Is there a way to Change the Writing Speed When Burning CD-R's?

    Is there a way to change the writing speed when burning CD-R's?
    I don't see any options in Disk Utility.
    Rob
    P.S. Since I am burning coasters lately with the Pioneer DVR-111D, I though that I might solve the problem by using a lower write speed.

    I dn't believe so with Disk Utility although you can with Roxio Toast Titanium. I would try another media brand, like Verbatim, as a first step and see if the coaster problem goes away.

  • Is there a way to change the project timecode in FCPX?

    Is there a way to change the project timecode in FCPX?  So that my sequence can start at 01:00:00:00 or am I stuck
    with it starting at 0?

    I guess you could, but that would be an hour long gap clip before your sequence which would make for a very
    unweildy sequence.  Especially since this cut will be only about a minute.

  • RH HTML 9-chm file How to change the Shared Path of all images in entire project.

    Dear alll,
    Previously, I inserted all images to my project from a shared folder with path A. But now I could not access to path A anymore, so I created a folder with the same name in path B which have the same images.
    Now I need to update images and I cannot synchronize them from the current folder with path B.
    I right-click an image in Project Manager pod, select Properties and then I saw this image has an attribute Shared Path is path A. There is any way to change this Shared Path to path B for all images in the project at a time ?
    Anyone experiments it, please help me. Thanks.

    Given you posted on the weekend, I would expect everyone to be off doing weekend-y things, rather than work-related things.
    I don't use shared resources, but perhaps this topic, specifically the Replace Link entry might help?
    http://help.adobe.com/en_US/RoboHelp/9.0/RoboHTML/WS1b49059a33f77726-14df8d3712b0ab9d010-7 ffd.html
    Amber

  • HELP!  Is there a way to change column information in iTunes such as name of artist, genre etc, other than deleting them one at a time? Such as the way you delete an entire group of songs by holding down control keys or selecting the Select All command.

    HELP!  Is there a way to change column information in iTunes such as name of artist, genre etc, other than deleting them one at a time? Such as the way you delete an entire group of songs by holding down control keys or selecting the Select All command. Thanks.

    If you select all the songs you want to change, Be it one song or an akbum, or an Artist, Or Genre, or playlist. Then Right mouse click  and Get Info. You then get a slightly different from normal Get Info box as this is the One for Multiple items.
    In there have a look at the tags and see if the one you want to changes is in there. There are a few tabs so if for example you wanted to change the Media Type from Home Movie to Movie go to the Options tab and select Movie and OK and it will change the whole selection.

  • In Aperture 3, how can I easily move entire projects out of my main Ap Library into other libraries?  My Ap library is running super slow because it's overloaded l so I have created two new libraries, but can't seem to move the projects into them

    In Aperture 3, how can I easily move entire projects out of my main Ap Library into other libraries?  My Ap library is running super slow because it's overloaded, so I have created two new libraries, but can't seem to move the projects into them?

    Hello Annabel,
    To move entire projects export them as Aperture Libraries, and then import those Libraries into the other Aperture Library:
    Select the Project in the Inspector, then
    File -> Export -> Project as Library
    In the other Library do:
    File -> Import  -> Library/ Project
    But I am not quite convinced, that the size of your current Aperture Library is responsible for the slowness of Aperture - Aperture is designed to cope with huge libraries.
    You may want to post your hardware setup and details of your library, and some of the hardware experts here may help you to find the reason for the slowness.
    A huge library should only be a problem, if the projects are too big, and if you have many, many smart albums at the root level of your library.
    So keep the projects small, and try to move some of your smart albums to lower levels in your folder structure (then Aperture does not need to scan all of your images to build the smart album).
    Other reasons for Aperture's slowness may be, e.g.
    An overfull system drive and/or external drive (keep at least 20% of your drives empty)
    lack of RAM
    a corrupted Aperture Library, that needs repairing
    Have you checked those options, before you split your library? It would be a pity to split it, for you would loose the ability to browse all parts at the same time, to use all your images in the Media Browser, etc.
    Regards
    Léonie

Maybe you are looking for