Way to change the Message based on Imported IDoc

Hi,
I just want to know if there is way to change the message based on Imported IDoc?
Basically I imported an IDoc from R/3, this Imported Object would display just one of the Segment for where there are max allowable limit is n segment (the same segment), now during message mapping I need to have more than one Segment of same type...Wasn't sure how to add more segments?
Thanking in advance

Hi Rajan,
If I have understood you correctly you,you mean that you have imported an Idoc with a segment with cardinality 0..unbounded(n) and you want to reproduce the segment n times in the target structure.
you need not change the cardinality.This needs to be done in the mapping itself.just map the source structure to the target segment, handling the context properly such that for every occurence of the source structure the corresponding segment is produced in the target.
Regards,
Sulakshana

Similar Messages

Is there a way to change the message received in Outlook from Mavericks calender?

Hi there
I found a post discussing this whereby a user was advised to edit the ITIP.stings file in the contents of the iCal.app to change the standard message that states "To accept or decline this invitation, click the link below" etc message that an Outlook user received when getting a calender invite from Mavericks Calender.
The post is here:
Is there a way to change the standard email message?
Problem is, on Mavericks it does not have that string in that file - I've actually checked ALL the .strings files in that folder but to no avail. Did it move somewhere else on Mavericks?
On another note...this whole process is part in part moving from Entourage to Mac Mail and Calender due to Apple's (illogical) removal of the ability to sync with anything other than iCal / Mail / iCloud. So we manually moved everything across (thousands of mails and hundreds of folders) and hundreds and hundreds of calender events.
Now it syncing but herewith the problem...if I create an event and send it to someone, they receive it as the iCloud account email and not our work email (pop account with our own domain). Even then when I open it in Outlook, it has some horribly malformed address and when you accept, you get a delivery failure.
So we create a different Calender (On the Mac) and this sends 100% (except for the message in the body we'd like to change) but this does not sync with the Iphone or the iPad. Then we have to manually change the calender event to the iCloud calender and it brings up a message that its going to send the update to all the attendees...and you must choose between send via mail or send via server.
What do I do!?

Anyone? Just need to know where I can change that message and also how I can set up the icloud calender to send invites using my work email address (as configured in Mail)?

Is there any way to prioritize the Messages in ALSB?

Hi all,
Is there any way to prioritize the messages based on some property of the message in ALSB. For example the messages from a specific sender is to have higher priorty.

You can configure thread pools on your different proxy/business service (dispatch policy). Therefore prioritizing client requests based on the service invoked.
In ALSB 3.0 you will also be able to control service throughput, for example you don't want to overload your back-end system with requests from ALSB.
Gregory Haardt
ALSB Prg. Manager
[email protected]

Is there a way to change the IMG # before importing to iphoto

I have a "new" I pad and want to import the photos that I have taken with it to IPhoto. The issue is one that I have had with I Photo before, I already have photos with the IMG_0001,IMG_0002, ect.... and they will mess up my library if I import them.
Is there a way to change the File name for these images or does anyone know a work around that does not include creating a new library?
Thanks

No
Suggest to Apple
You can make a smart album based on camera to seperate photos
LN

Is there any way to change the default font for outgoing text-messages, in "Messages"? (OSX 10.10)

Is there any way to change the default font for outgoing text-messages, in "Messages"?
I can change it for one conversation, but then it resets to the default, tiny font.
The preferences menu only lets me change the conversation font.
(OSX 10.10)

Hi,
As you may remember there used to be a Messages pane to the Preferences where the Font and colour of the Balloons or background and the Font text colour could be changed.
And there was a Format Menu for character, word and Sentence changes in the current IM or iMessage.
Those have gone in Yosemite's version of Messages (Despite it retaining the designation of Messages 8 the same as Mavericks' version).
All that can be done now is set the size of the font and this has been moved to the General Section of the Preferences.
The Yosemite version has also been fixed to using the Balloons style of send and receiving any type of messages as well.
Changing the Font would involved editing the Balloon.transcript file.
10:34 pm Saturday; December 13, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Change the message subject line at runtime based on system id in RSWUWFML2

I need to display different subject line based in the system id. I am using 'FM for Preparatory Phase' where in, am changing the message number based on system id. But it doesn't works, and the msgno remains the same...
Can anybody suggest how to acheive this???

I can also use different messages in different systems but I just wanted to know if there is something we can do with this user exit option present in the selection screen of RSWUWFML2 or not ?

Is there a way to change the download/up location for the imported Library?

I user Vista 64bit
I have the latest version of Itunes
My OS is on my C: partition
My main hard drive space is on D:
I have installed Itunes to D:
When I try to import my music back to my Itunes after Downloading new copy
the music countinues to try to save it to C:
I have move the Itunes Library folder to D: , and when I try again it will create a new file in the C: again where there is not enough space. The C: drive is just for OS and a bit of additional room.
I have redownloaded Itunes, I have repaired itunes,
Is there a way to change the stored musice location or is this a built in feature of ITunes and there is nothing I can do about it?

i have the same problem. i bought a new external hard drive and i am trying to move my entire library onto it. i copied all of my itunes library onto it but when i tried to delete a song off of my initial C: drive to test it, i had to go in an individually change where the songs location was. i already tried changing where the itunes music folder was located however the library still says its located on the C: drive.

Is there a way to change the xml message generated by JDeveloper Proxy

Hi,
I have created jax-ws proxy client using JDeveloper 10g. I need to change the generated xml message tags. I need to remove the namespace prefix tags from the xml message. For ex: the current request message looks like this:
<ns0:EMPLOYEE_NAME>John</ns0:EMPLOYEE_NAME>
should be
<EMPLOYEE_NAME>John</EMPLOYEE_NAME>
without the nso prefix.
How can I do that? Please help me.
Thanks.

To original poster, please just select "Problem Solved" to help any future questions about this.
Is there a way to change the text message ringer? No.
End of thread

My txt message settings recently changed to send txts from my Mac email rather than my phone# and there doesn't seem to be a way to change the settings back. The phone# in receive at screen is under intensified so unselectable. Any suggestions?

My txt message settings recently changed to send txts from my Mac email rather than my phone# and there doesn't seem to be a way to change the settings back. The phone# in receive at screen is under intensified so unselectable. Any suggestions?

After reading what you have posted, I checked my iPhone 4S. When looking at messages in settings, my receive at has 2 addresses, my phone number and my Apple ID email address. The phone number is "under intensified" as you describe it. Checking the Caller ID, it shows my phone number and Apple ID email. The phone number is checked. This all seems to be the same as you describe yours. My text messages are all working as they always have, and they are showing as coming from my phone number. Both to people that I iMessage with and people that I can only text with. I'm not sure why you say texts are being sent from your Mac email. Did someone receive a text that shows the email as the return address?

Apple Mail, is there a way to change the default time-out?

This has been puzzling me for some time and I have not found a solution. The problem which I also posted in the Mail forum (though I think that if there is a positive answer it will come through here) is as follows:
I have an email account with on my company's mail server which is actually a Novell Netware server with a POP3 service. When using mail to send mail, I have no problems. When using mail to recieve mail, well, sometimes it gets the mail, and sometimes it does not. Usually, I can recieve mail for two or three weeks then it just stops working. No changes to my system, no updates or anything, I recieve email at one point in the day and then 15 minutes later - nothing. In the Activity Monitor, I see "Connecting to ..." then "Sending Password" then "Checking for Messages", then (after a while) it beeps as if it did not find any messages to download (no error!).
Some weeks later, after suffering with webmail, suddenly, it works again. This usually coincides with maintenance on the server, but not always. It also seems to correspond with a general improvement of the server performance. But eventually, the cycle starts over again with mail suddenly not able to find any new messages for that account.
I use dial-up at home, ethernet LAN at work, and DSL at our satellite offices. When it works on one it works on all. Also note that my other email accounts (not in any way connected to my company) work as they should at all times and in each setting.
Is it possible that mail simply times out before the messages are discovered. The Novell server used for mail is by no means known for its performance. If so, is there anyway to change the default timeout in mail for "Checking for Messages"?
Things I have tried:
I have dumped the "MessageUidsAlreadyDownloaded" and "MessageUidsAlreadyDownloaded2" files to no avail.
I have changed computers (I recently upgraded from a ti400), reinstalled the OS, upgraded from 10.2.8 to 10.3.x to 10.4.3, and removed and recreated the mail account (multiple times), all to no avail.
Based on the above observations, I feel that it may be that "Mail's" "Get-mail" function is timing out before new messages are discovered on a very slow server. Is there any way to change the default time-out to evaluate this hypothesis?
Any help would be appreciated.
Kraig

I already thought of that one. I deleted my account from there. But it didn't default to the other one. It just told me I needed to add an account. Thanks tho

Western Digital My Book World EditionI have bought a WD My Book World Edition to use for back-up of my iMac, but when I try and log onto the drive with Apple time Machine (back-up software) or connect in any other way i get the message 'There was a proble

I have bought a WD My Book World Edition to use for back-up of my iMac, but when I try and log onto the drive with Apple time Machine (back-up software) or connect in any other way I get the message 'There was a problem connecting to the server "MybookWorld.local" The version of the server you are trying to connect to is not supported. Please contact your system administrator to resolve the problem'
It is a brand new iMac and running Lion OSX
Any ideas on how to solve would be gratefully received?

Followed the directions on this page and it worked!
http://forums.macrumors.com/showthread.php?t=1102423
Part One - Turn on SSH (in the admin panel)
[1] Go to to http://mybookworld.local
[2] login: username will be admin, password will be whatever you have setup. If you can't remember it should be in your Mac OS X keychain (Utilities > Keychain Access, search for "mybookworld"). If you have not changed if from the default the password will be admin as well.
[3] Switch to advanced mode.
[4] From the System tab, pick Advanced.
[5] Enable SSH Access, and click submit.
[6] Click on the network tab and then the LAN button
[7] Make a note of the IP address
Small, maybe obvious, but nevertheless important point: For the install to work, your NAS needs to be connected to a router with internet access.
Part Two - Install netatalk2.2
[8] Open Terminal.app (Utilities > Terminal)
[9] Enter the following command (substitute in 127.0.0.1 for the actual IP address you noted down in step 7), then hit return:
Code:
ssh [email protected]
[10] When prompted, enter the ssh password (will be welc0me).
[11] You are now going to download the installer. Enter the following command, then hit return:
Code:
wget http://mybookworld.wikidot.com/local--files/netatalk2-2-on-whitelight/install_netatalk.sh -O install_netatalk.sh
[12] Once completed, you will need to run the installer. Type:
Code:
sh install_netatalk.sh
[13] You will be asked a number of question during install, answer yes to all. When asked about the "DHX2 login process", I opted to install the modified version, so I can confirm it works.
[14] Once the box has restarted, you should be able to connect to your afp shares and continue to use Time Machine.

Is there a way of changing the jdevappunknown_ folder that Ant deploys to?

Using Ant DeployESBSuitcase doesn't work when deploying Projects with dependencies.
Steps to re-create error:
Create a JDeveloper ESB Project called ‘ProjectB’ and add file adapter called ‘WriteFile’ to write a file. Deploy this project using JDeveloper.
Create another JDeveloper ESB Project called ‘ProjectA’ and add a file adapter called ‘ReadFile’ to read a file.
From ProjectA’s routing service add a routing rule and use ‘Browse Target Service Operation’ (Gear wheel icon) and select the deployed ProjectB_WriteFile service.
Deploy ProjectA using JDeveloper.
Use Ant to create a deploymentplan file for both projects by running the ExtractESBDeploymentPlan target.
Note: As these projects are saved under their own directory structure
C:\Workspace\Local\ProjectA and C:\Workspace\Local\ProjectB you will need to copy the ..\ProjectB\ProjectB_WriteFile.wsdl to the ProjectA folder.
Confirm that ProjectA and ProjectB Ant build files DeployESBSuitcase properties (esbMetadataServerHost and esbMetaServerPort) point to another server other than the one you have just deployed ProjectA and ProjectB to using JDeveloper. i.e. a clean server that doesn’t know about these Projects
Deploy ProjectB using Ant’s DeployESBSuitcase target.
Deploy ProjectA using Ant’s DeployESBSuitcase target.
An error is now thrown
C:\Workspace\Local\ProjectA>ant DeployESBSuitcase
Buildfile: build.xml
DeployESBSuitcase:
[echo] Deploying ESB Project ProjectA to serverx
[deployESBSuitcase] Deployment Attempt Response :
[deployESBSuitcase] <deploymentSummary>
[deployESBSuitcase] <message>Entity Deployment Failed</message>
[deployESBSuitcase] <errors>
[deployESBSuitcase] <error code="1049" severity="5">
[deployESBSuitcase] <description>WSDL "esb:///ESB_Projects/Local_ProjectB/ProjectB_WriteFile.wsdl" of service "DefaultSystem.ProjectB_WriteFile" is invalid or unaccessible. Following error is thrown by WSDL Parser : WSDL Parsing Failed: org.apache.slide.structure.ObjectNotFoundException: No object found at /files/ESB_Projects/Local_ProjectB</description>
[deployESBSuitcase] <fix>Ensure that the WSDL is accessible and valid. If the problem persists, Contact Oracle Support.</fix>
[deployESBSuitcase] </error>
[deployESBSuitcase] </errors>
[deployESBSuitcase] </deploymentSummary>
[deployESBSuitcase]
[deployESBSuitcase] Deployment Failed ...Unhandled Exception
[deployESBSuitcase] java.lang.Exception: Deployment attempt failed, please review deployment attempt response above
[deployESBSuitcase] at oracle.tip.esb.client.anttasks.DeploymentHelper.deploy(DeploymentHelper.java:128)
[deployESBSuitcase] at oracle.tip.esb.client.anttasks.DeploymentHelper.deploy(DeploymentHelper.java:175)
[deployESBSuitcase] at oracle.tip.esb.client.anttasks.DeployESBSuitcaseTask.execute(DeployESBSuitcaseTask.java:510)
[deployESBSuitcase] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
[deployESBSuitcase] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[deployESBSuitcase] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[deployESBSuitcase] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[deployESBSuitcase] at java.lang.reflect.Method.invoke(Method.java:585)
[deployESBSuitcase] at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
[deployESBSuitcase] at org.apache.tools.ant.Task.perform(Task.java:348)
[deployESBSuitcase] at org.apache.tools.ant.Target.execute(Target.java:357)
[deployESBSuitcase] at org.apache.tools.ant.Target.performTasks(Target.java:385)
[deployESBSuitcase] at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1337)
[deployESBSuitcase] at org.apache.tools.ant.Project.executeTarget(Project.java:1306)
[deployESBSuitcase] at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
[deployESBSuitcase] at org.apache.tools.ant.Project.executeTargets(Project.java:1189)
[deployESBSuitcase] at org.apache.tools.ant.Main.runBuild(Main.java:758)
[deployESBSuitcase] at org.apache.tools.ant.Main.startAnt(Main.java:217)
[deployESBSuitcase] at org.apache.tools.ant.launch.Launcher.run(Launcher.java:257)
[deployESBSuitcase] at org.apache.tools.ant.launch.Launcher.main(Launcher.java:104)
BUILD FAILED
java.lang.Exception: Deployment attempt failed, please review deployment attempt response above
at oracle.tip.esb.client.anttasks.DeploymentHelper.deploy(DeploymentHelper.java:128)
at oracle.tip.esb.client.anttasks.DeploymentHelper.deploy(DeploymentHelper.java:175)
at oracle.tip.esb.client.anttasks.DeployESBSuitcaseTask.execute(DeployESBSuitcaseTask.java:510)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.Target.execute(Target.java:357)
at org.apache.tools.ant.Target.performTasks(Target.java:385)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1337)
at org.apache.tools.ant.Project.executeTarget(Project.java:1306)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
at org.apache.tools.ant.Project.executeTargets(Project.java:1189)
at org.apache.tools.ant.Main.runBuild(Main.java:758)
at org.apache.tools.ant.Main.startAnt(Main.java:217)
at org.apache.tools.ant.launch.Launcher.run(Launcher.java:257)
at org.apache.tools.ant.launch.Launcher.main(Launcher.java:104)
Total time: 2 seconds
C:\Workspace\Local\ProjectA>
This error is thrown as ProjectB’s wsdl file cannot be found under esb:///ESB_Projects/Local_ProjectB/ProjectB_WriteFile.wsdl.
This is due to Ant deploying ProjectB under …\ESB_Projects\jdevappunknown_ rather than …\ESB_Projects\Local_ProjectB
When deploying ESB projects from JDeveloper they are created under the following structure: <Oracle_Home>\integration\esb\oraesb\artifacts\store\metadata\files\ESB_Projects\<JDev_Workspace>\<Project_Name>
However when using the Ant target DeployESBSuitcase ALL projects are deployed to the same folder:
<Oracle_Home>\integration\esb\oraesb\artifacts\store\metadata\files\ESB_Projects\jdevappunknown_
Is there a way of changing the jdevappunknown folder used by Ant deployments?
Edited by: user2000 on Apr 27, 2009 3:37 PM

James,
Following my steps above I don't get anything in the deploymentPlan for either ProjectA or ProjectB which includes a WSDL URL I can modify.
ProjectA includes the ProjectB_WrieFile.esbsv file which contains the following line:
<wsdlURL>esb:///ESB_Projects/Local_ProjectB/ProjectB_Write.wsdl</wsdlURL>
Is there something I can change which will mean when I regenerate the deploymentPlan it will include the WSDL location?
Thanks
Alistair
Edited by: user2000 on Apr 28, 2009 11:55 AM
I've included Both Deployment Plans:
ProjectA Deployment Plan
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<deploymentPlan>
<serviceDeploymentPlan qname="DefaultSystem.ProjectA_ReadFile" status="ENABLED">
<parent type="system" qname="DefaultSystem"/>
<properties>
<jcaOperation>
<property value="Read" name="LogicalDirectory"/>
<property value="oracle.tip.adapter.file.inbound.FileActivationSpec" name="ActivationSpec"/>
<property value="Archive" name="LogicalArchiveDirectory"/>
<property value="true" name="DeleteFile"/>
<property value=".*\.txt" name="IncludeFiles"/>
<property value="60" name="PollingFrequency"/>
<property value="0" name="MinimumAge"/>
<property value="true" name="OpaqueSchema"/>
</jcaOperation>
<jcaAddress>
<property value="eis/FileAdapter" name="location"/>
<property value="*.txt" name="UIincludeWildcard"/>
</jcaAddress>
</properties>
</serviceDeploymentPlan>
<serviceDeploymentPlan qname="DefaultSystem.ProjectA_ReadFile_RS" status="ENABLED">
<parent type="system" qname="DefaultSystem"/>
<properties>
<serviceDefinition>
<property value="ProjectA_ReadFile.wsdl" name="wsdlURL"/>
</serviceDefinition>
</properties>
</serviceDeploymentPlan>
<serviceDeploymentPlan qname="DefaultSystem.ProjectB_WriteFile" status="ENABLED">
<parent type="system" qname="DefaultSystem"/>
<properties>
<jcaOperation>
<property value="Write" name="LogicalDirectory"/>
<property value="oracle.tip.adapter.file.outbound.FileInteractionSpec" name="InteractionSpec"/>
<property value="ProjectB_%SEQ%.txt" name="FileNamingConvention"/>
<property value="1" name="NumberMessages"/>
<property value="true" name="OpaqueSchema"/>
</jcaOperation>
<jcaAddress>
<property value="eis/FileAdapter" name="location"/>
</jcaAddress>
</properties>
</serviceDeploymentPlan>
</deploymentPlan>
Project B Deployment Plan
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<deploymentPlan>
<serviceDeploymentPlan qname="DefaultSystem.ProjectB_WriteFile" status="ENABLED">
<parent type="system" qname="DefaultSystem"/>
<properties>
<jcaOperation>
<property value="Write" name="LogicalDirectory"/>
<property value="oracle.tip.adapter.file.outbound.FileInteractionSpec" name="InteractionSpec"/>
<property value="ProjectB_%SEQ%.txt" name="FileNamingConvention"/>
<property value="1" name="NumberMessages"/>
<property value="true" name="OpaqueSchema"/>
</jcaOperation>
<jcaAddress>
<property value="eis/FileAdapter" name="location"/>
</jcaAddress>
</properties>
</serviceDeploymentPlan>
</deploymentPlan>

Is there a way to change the addresses used in an existing iMessage thread?

This is kind of a multi-part question. Let me describe my scenario.
I have many iMessage threads with other iPhone users where the "reply" addresses for one or both ends are the phone *numbers* instead of AppleID email addresses. (This could be due to a number of factors... either they had their "Start new conversations from" address set to their phone number, and/or they started a new conversation with me sending it to my phone number. How it *got* that way doesn't really matter). I want to be able to change the addresses of the conversation to AppleID's (so that I'll still get messages when I change SIM cards, among other reasons).
With iOS 8's new ability to add/remove people from conversations, I thought I would be able to add the AppleID address and remove the phone number address, but there are two problems with that: 1) iOS 8 seems to only allow this for conversations which began as multi-person conversations, and 2) it doesn't seem to want to let you add addresses for people who are already recipients via another address (in other words, if Alice is already on the conversation via her phone number, I can't add her AppleID to the conversation). I guess I could remove the person first, and then re-add them with the other address... but I'd feel safer if I could add the next one before removing the first one.
I know I could just tell the other person to delete our thread and start a new one, but I don't want to lose all of our dialogue and pictures (and I don't want to have to manually save it).
So, the questions:
Is there a way to change the address my counterparty is sending to when they make further replies to our conversation?
Is there a way to change the address I send to when I make further replies to the conversation?
Is there a way to change the default address to use when trying to send someone an iMessage? (What I'm after here is a way to craft my "contact" entry in people's phones so that, when they try to send a message to me and start typing my name, my preferred address comes up on top).
As it looks like the only way to do this might be to use iOS 8's method of adding/removing recipients, is there a way of converting a two-person conversation into a multi-person one?

I think I may have solved it, actually. I find that if I switch the timecode to NDF in the source viewer, it seems to work. I have tried it on three clips and they have sync'd without problems. Hopefully this will continue to be the case.

Is there a way to change the duration of a group of selected clips all at once?

Hi all,
I'm working with good old Premiere 6 on Windows 7.
Is there a way to change the duration of a group of selected clips all at once? If I have a large group of clips in my timeline that are all the same duration, once I've selected them all in a group, can I somehow change the frame number duration of all the clips at the same time?
I've found other things that can be done to a group of clips at the same time, but I can't find a way to change the duration of a group of selected clips.
Thanks,
digi

Thanks Jim and Bill,
In my efforts to work around the problems with the distortion and horizontal interlace lines that come when using the Motion Settings, I'm doing stop frame animation with hundreds and hundreds of layers in PSDs in multiple files placed in hundreds of one, four and six frame sections in Premiere, so if I find that I need to change the number of frames per clip in hundreds of consecutive clips (not actual duration of speed changes), then I need to pull out the right side of hundreds of frames after first moving them apart enough to allow for changing them if I'm making them longer.
These animations are different from the rotating reel animations in that they are for laterally moving subjects that are long streams of moving graphics and photos.
I read about "clip nesting", but I think that only applies to clips or groups of clips that are the same, whereas my clips are each from different imported layers times 125 or so, consecutively placed one after another to create the laterally moving stop frame animation.
Now I've tried johnbmx4christ's alternate method of creating rotations that was just posted on the other thread about the rotation distortion, but that method results in the same oblong distortion and messed up looking horizontal interlace lines.
What a can of worms.
Thanks,
digi

Is there a way to change the color of the Bezier Curves and points to a different color other than black I find it perplexing while setting points and curves working on a photo that needs to be separated from it's background for placement on transparent

Is there a way to change the color of the Bezier Curves and points to a different color other than black I find it perplexing while setting points and curves working on a photo that needs to be separated from it's background for placement on transparent backgrounds. Any thoughts?

Yes. Well, sort of: instead of a "path", set the pen tool to "shape" in the tool properties. Then set the fill colour to transparent, and the stroke colour to the colour you want. You can also set the stroke width.
Not perfect, but at least you can see the path more clearly - the anchor points and handles still remain the default colour. Open the path panel, and right-mouse click the path shape to create a selection based on that shape. The Paths panel menu also allows you to create work paths based on that shape.
Unfortunately when you try to move the handles the black thin outline appears again until you release the mouse button.
This is one of several things that works better in Photoline: in Photoline, once the path is set to a specific colour, editing the path uses the actual colour and stroke width. which is extremely handy for creating path based selection with awkward background colours and/or a high resolution screen. In Photoline the handles and bezier points are also much, much larger, which makes it rather simpler to work with as well - especially on a higher resolution screen. And when selected the handles and points are a clear red with a black outline - again easier to spot and identify. I just works better, in my opinion.

Way to change the Message based on Imported IDoc

Similar Messages

Maybe you are looking for