Way to click on link to open in new page?

Anyone figure out a way to open a link in a new page? I have a couple of pages I use as "home" pages and I'd like to be able to tap and open a link in a new page to keep the existing page at its site.

I haven't found a way yet. It depends on how the original page was coded.
If it's a page you control, try adding the following to the link anchor tag:
target="_blank". If not, sorry. Maybe it's something they'll add, but honestly, I doubt it (my personal opinion). It would add clutter to a portion of the interface that's working quite smoothly right now. There's no precedent for a 2-fingered tap like holding down a key, and holding down on the URL for a pause already does something.
My two cents. Sorry! I agree it would be very useful.
Aym

Similar Messages

  • Clicking on a link to open a new page or tab gives me a blank page.

    If I click on a link to open a new page or a new tab, the page that opens is always blank and no address is in the address bar. Also, occasionally, my refresh button is "grayed" out so I can't hit that either. I think this is some sort of security setting blocking it. Can anyone help.

    Thanks Jason, I had the same problem and did exactly the steps above. Problem solved! You rock! :)

  • I have sent files several times now and when the recipient clicks the link to open. it says page cannot be found.  This just started happening.  what needs to be corrected?

    In Adobe Send, I have sent files several times now and when the recipient clicks the link to open, it says page cannot be found.  This just started happening.  What needs to be corrected?

    I can think of a couple of reasons for this behavior.
    You inadvertently turned off the sharing for the files.
    The link that the user is clicking on is incomplete; perhaps it got broken across lines in an email message. Are you sending Anonymous Links or Personalized Invitations? If the former, are you certain that you copied the entire link?
    Some things to try.
    Have the user send the link back to you so that you can test it. Does it work for you?
    If you look at your Sent Files list, is the name in the Sent To column struck through (e.g., John Smith)? That would indicate that it has been unshared.
    If you could get back to me with answers, perhaps we can get to the bottom of this.

  • How can I click a link to open a new tab without automatically switching to the new tab?

    I use Ixquick as my search engine. When the search result comes up, every time I click a link, Firefox creates a new tab and changes the focus from the search results page to the page for the link I clicked.
    I want to have a new tab created , but I want to stay on the search results page to be able to continue clicking other tabs of interest.
    I'm new to Foxfire and this functionality was very useful to me when I used Internet Explorer.
    Any help will be appreciated.

    Hi Kathy
    You can start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Both in safari and chrome, whenever i click any link it opens a new tab with advertise. Original tab turn to top sites.

    This is a **** of problem i am facing. I am so annoyed that i am considering to get rid of Mac. My previous mac did not have such problem. Well, lets say i have opened airline site, i am trying to search ticket, i have put all destination and dated, once i click search, it opens a new tab and current one become blank with top sites. Its really annoying. Can someone advise what to do?

    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Extensions
    Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.

  • Middle click on link to open in new background tab suddenly stopped working--could anyone help me?

    Works when clicking on bookmark; not so much when clicking a link one a page. I've got the latest version of Firefox yadda yadda yadda. It's a pain browsing without this. For the love of God help. Thanks.

    I had this issue too, here's the [https://plus.google.com/106764458835637721222/posts/haLKEu3Qm39 solution]!
    I hope it works for you too, good luck! :)
    Lord_Blizzard

  • Link to open on new page

    Is there a way to have links from a web page to open on a new page? Right now my links open on the same page so I need to go back to see the original page where the link is.
    Thank you.

    Bonjour,
    Publish your website
    Visit it
    Gets the URL of the page you want to open in an new window.
    iWeb :
    select one word (or more) on your page
    inspector > Link > hyperlink > Check "Enable as an hyperlink" -> link to a external Page - paste your URL > Check "Open Link in a new window"

  • Link not opening in new page

    I have a javascript for an array of rotating logos.  Each logo is associated with a link.  When you click on the logo, the corporate website linked to the logo opens but it does not open in a new page.  How do I get it to open in a new page? 
    The website link is http://lexedfoundation.org
    the code calling the links is
    <a href=" " onClick="clickLink(); return false;" onMouseOver="descript(); return true;" onMouseOut="window.status=' ' " target="_blank"><img src="images/corp.gif" border=0 name="corp></a>

    Gramps,
    I'm relatively new to web development and I'm afraid I don't understand what static address I'm supposed to change.  I tried substituting the http://www.externalsite.com with clickLink() but that resulted in a "page not found" message.  I don't understand what  "http://www.externalsite.com" represents since there is a different address for each logo.  Could you please be more specific?
    Thanks for your help.

  • Flash website - need link to open in new page

    I created my web site in Flash and published it as an HTML file. It's a page that has thumbnails.  Clicking on a thumbnail should open a new window to view the full-size version. 
    When I play a SWF file and click on thumbnails, my project opens in a separate window.
    When I open my page (published in Flash as HTML) in Dreamweaver and view it in the browser, when I click on thumbnails, instead of opening a new window full-size version overrides the current window contents -- but there is no "back" tab on the content, and the browser "back" tab takes me to the home page rather than back to the previous window.
    How do I make it so that the link opens a new window (that can then be closed after viewing) rather than overriding the contents of the existing window after I publish my page as HTML file?
    Thanks for suggestions!

    My flash published html file works fine, I cannot open my thumbnails in a separate window when I open my HTML file in the browser from Dreamweaver.
    It doesn't even open in the different tab. It opens over my viewing page and I have to click "back" in the browser, but it goes back to the main menu not to previous viewing page.
    My thumbnails and links to the full-size files are in a separate XML file.
    Thanks again

  • Command + Click on link to open in new tab suddenly not working

    I am an enthusiastic user of command + click to open a link in a new tab, but it suddenly stopped working earlier today and I cannot figure out how to re-enable this feature. I'm on the beta release cycle at version 7.0, with several addons installed, including (perhaps relevantly) Tab Mix Plus.

    This is a link to a modified (by the Greasemonkey devs) version of Tab Mix Plus. Works around the bug until the TMP guys do so officially.
    [http://sourceforge.net/projects/greasemonkey/files/]

  • Every time I click a link it opens a new window when it is only suppost to open in the same window.

    This just started recently and all the other suggestions did not work. So i am trying to get a more up to date solution to this problem please help.

    Does this affect all sites? If it only affects some sites, could you give examples?
    Note: for Google, you can turn this on and off in the search settings. Click the "gear" (Options) icon, then Search settings, then uncheck the box for "Open each selected result in a new browser window".

  • When I click a link to open a new window, the new window appears in the bottom right corner and I have to drag it up every time to enlarge.

    This problem only began today and only with Webkinz.com
    When my daughter went to login, the new window where she logs in was in the bottom right corner. I pulled it up to the display and it stayed there. When she tried to log in again later on in the day, the login window appeared in the bottom right corner of the screen again.

    Open Firefox -> Help Menu -> select "Restart with Add-ons Disabled"
    Firefox will close then it will open up with just basic Firefox. Now you can Enable the Add-ons and it should be ok. Check and tell if its working.

  • How come everytime I click a link it opens a new window?

    It also highlights the whole word when I only want to click a part of it and it doesn't let me scroll, does it have anything to do with my kitty walking on the keyboard?

    try pressing shift 5 or 6 times to deactivate sticky keys. press cancel when the sticky keys dialog box comes up.

  • When I click a link to open a new tab/window it opens and the URL appears but the page doesn't load?

    To clarify - the new tab or window appears, and the web address is showing correctly in the address bar, but for some reason the new page won't load unless I manually highlight it and hit return. Please help!

    This issue can be caused by an extension that isn't working properly.
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • When I click a link to open in new window, new window is opened in small size. How can new window be opened maximized?

    OS: Windows XP(SP3)
    Firefox version: 3.6.22

    This issue can be caused by an extension that isn't working properly.
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Maybe you are looking for

  • SL IPSEC VPN Server Not working with Windows 7

    I have an airport extreme and a mac mini w/ snow leopard server. I am able to VPN into my network from my iPhone, MAC 10.6.2, & Windows XP. I am not able to VPN into my network from 2 different Windows 7 machines. I am able to VPN from a laptop runni

  • How can I make Skype Desktop the default for Call: links in MS Outlook?

    How can I persuade MS Outlook to use Skype Desktop for Call: links (such as those for phone numbers in a Contact Card)?  Right now it is using Skype for Business to open them (I have both Skype Desktop and Skype for Business - formerly Lync - install

  • Tracking of RAW MATERIAL

    Dear, My client has a retail business but same as trading business means we purchased finished goods from the manufacturer and directly sell it in the market. Directly we don't care for the raw material. Client don't purchased raw material but provid

  • Open source JVM porting on MIPS

    Hi All, I am new to java , I want to port kaffe JVM to MIPS target . I have below questions. 1. Is any other Free JVM available which can be ported to MIPS. 2. Is any body port Kaffe to MIPS.. Cheers Naveen

  • Grocery Demo Application Problem

    Good day! I have deployed GroceryDemo Application. Most options are working, but one not. I have problem with provisioning event. In profile trc file I see this exception and it is reapeating every 20 seconds: Error in Processing Next Change From OID