Way to correct sound issue?

Hi all, thx to read this thread,
i just wonder if someone know how to correct the sound issue... 'cause after a while in game randomly my sound can stop and restart just like that.. sometimes i need to close the program and go in sleep mode.. after that its ok...my agp/sound is already set to 66/33... some1 have an idea?
Frog
p.s. i got the last msi driver for sound and im running on WinXP pro

I also had a problem looks like yours.
Sound disappeared, when I entered to CounterStrike (I forgot version).
Sometime it didn't disappear immediately but after some minutes, it disappeared.
All Windows, Games, Chat settings are OK.
Becuase I exchange with next board with same model, no problem at all.
And I test and test and test...., finally the sound was absolutely disappeared.
So I had to RMA it.
Can detect Sound device, can install driver, but no sound.

Similar Messages

Recent convert to Apple. Previously, I backed up my family pictures from PC to an external hard drive, a WD MyBook 3T. I can view the pics on my Macbook Pro, but I can't add new pictures. I'm sure this is a format issue, any easy way to correct it?

Recent convert to Apple. Previously, I backed up my family pictures from PC to an external hard drive, a WD MyBook 3T. I can view the pics on my Macbook Pro, but I can't add new pictures. I'm sure this is a format issue, any easy way to correct it?

Install NTFS 3G
http://macntfs-3g.blogspot.com/
If you were going to be reading and writing to a NTFS System Partition, you might have to worry about the instability messing up the operating system. However, you are reading/writing from a non system, backup device so you don't have to worry about screwing up an operating system.
I would still temporarily move my data to another device and reformat the drive for Mac OS X Extended.

I have a new impulse 61 key board and i have garage band. when i hit a key the sound has a delay before i hear it, i also have it hooked up to a bose radio. is there a way to correct this delay?

I have a keyboard Impulse 61. I have it hooked up to the imac and then to a bose speaker thru bluetooth and i have a long sound delay from when i hit a key until i hear sound. Is ther a fix for this delay?

The "restore disk" is built into the Mac. See About Recovery.
Need more specifics about what error messages you got while installing Adobe Flash.
However, you can almost avoid Flash altogether by setting YouTube to play the HTML5 version instead.
Click the Try something new! link at the bottom of the YouTube page.
I don't know about the sound issue. Might be hardware as you think. Try other headphones to check.

When I attempt to open a PDF file I saved from a website, I get the message "There was an error opening this document. The file is damaged and could not be repaired." Is there any way to correct this problem?

When I attempt to open a PDF file I saved from a website using Safari, I get the message "There was an error opening this document. The file is damaged and could not be repaired." When I save the same PDF file using FireFox it opens up immediately. Is there any way to correct this problem with Safari?

Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Strange sound issue on iPad2

my mom is having odd sound issues on her iPad 2 that i was able to somewhat fix. and it goes from fixed back to broken o.O
i thought it was interesting and worth mentioning, in case this happens to anyone else.
her iPad 2 is up to date on the latest iOS (5.0.1) and the issue occured while she was watching a video in YouTube. sound is totally off in all apps. in Settings>General under 'use side switch to' it is set to 'mute'. when going to Settings>General>Sounds the volume control for ringers will work and cause the ringtone to play, so it seems the speaker itself is fine. however it will only work there and for that short time. afterward sound will continue to remain off. the volume control on the side of the unit will bring up the on screen speaker icon, except it doesnt show the bar that usually goes up and down with the volume. and sometimes at the top of the grey box it will say 'sound effects'. ive also tried switching the mute on and off which changes nothing.
the one thing ive found that changes anything is the multi tasking bar volume control (double clicking the home button and then sliding all the way to the left, where it shows a screen orientation lock, brightness slider and a volume control bar). now the volume control bar is unfilled and doesnt show the dot that you can slide up and down to change the volume. however when i plug the iPad 2 into a computer (any computer seems to cause this) the volume control bar will suddenly fill and the dot will appear. now suddenly sound works in all apps and will change with the side control again as normal.
now heres where it gets even weirder!!!
sometimes when unplugging the iPad 2, after a short while volume will slowly fade out and be unresponsive again. the side buttons stop working and the volume control in the multi tasking bar will be unfilled and unresponsive. repeatedly plugging it in, going back to the multi tasking bar volume control and unplugging will eventually bring volume back. a couple times ive gotten volume to stay on and the volume bar to stay responsive by unplugging it while im in the multi tasking bar. but sometimes this is not the case.
for the record, ive tried 'turning it off and on again' and resetting all settings and erasing all content and settings (both with starting up from a back up on iCloud and PC, and starting up as a new iPad). ive used two different laptops, one with Windows Vista and one with Windows 7. the iPad is synced with one laptop but aside from using iTunes to back it up and for charging, ive not made any changes to the iPad using these devices. during the entire duration of my attempts to fix it, the iPad has been on no lower than 80% power. ive also called Apple and discussed this with an Apple Care representative. who suggested all the same things id already done, and walked me through all the fixes to make sure i didnt skip anything.
hopefully and most probable is that its just an issue with iOS 5.0.1. i also have an iPad 2 thats up to date with 5.0.1 and ive not had this issue, YET.
i just thought it would be beneficial to the community to share this issue and get word out that this is happening. i would like to hear everyones thoughts on this issue and if this has happened to anyone else. the Apple Representative that i spoke to had not heard of or had to deal with this issue so it sounds like its rather new or rare. though she did mention that this is not normal behavior for the device and might be a software issue.
id like to conclude with my love for Apple, and how user friendly iDevices are in general. ive had iPods from the very first generation and all of them still work (though the older ones cant be updated past a certain iOS). the few issues ive ever had were easily fixed with a visit to the Apple Store or searching on the Apple Support Communities. so as with before, i will remain positive and look forward to a bug fix in the next update.
-thanks in advanced for reading, and any comments
Paper_Dragon

Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

My ipad2 no longer lists songs alphabetically, is there a way to correct this?

My ipad2 no longer lists songs alphabetically. If I know the name of a song, but not the artist...I can't find it, is this a problem for others? Is there a way to correct this? If I look for a song that begins with an A....Adele pops up...Help?

On the bottom of the screen, there are tabs, when you click on them, they order the music in Alphabetical order based on what is selected...If you click on Playlist and have playlists on your iPad, then they are going to be in the order that the music was added on the playlist when it was created and the music was added. You want them in alphabetical order based on the name of the song...Click the "Songs" tab which has a musical note above it and the app will then sort the music in aplhabetical order...I have no issues with the music app in my iOS 7 and am able to get it to sort the music however needed by managing these tabs.

What is a packet problem? I'm having sound issues.

I'm at my wit's end. I am having sound issues. I've run diagnostic tests and everything comes back as OK, but it's not OK! Something somewhere is messed up and I can't figure it out.
I have been to the help rooms on paltlak and opened up support tickets and everything they told me to try has not helped. They suggested I change the sound tuning on my chat program, change exceptions on my firewall, uninstall and reinstall chat program, uninstall and install earlier version, download drivers for sound card, and etc. Nothing is helping this problem.
Someone mentioned that it may be router problems or packet problems. I'm not sure what that means, and that is why I'm on this forum asking for help. I have no other sound problems on my computer. My music and videos play fine. It's just when I'm in a voice enabled chat, do I experience these problems, or if I'm on a website that has videos, the video will not load all the way, so I only get 30 seconds of a video. Does anyone know what could be causing this?
I have used this chat service for over 5 years and up until a week or so ago, it worked fine. I did a complete reformat of my computer in hopes that it would help, but I'm still having the same problems. I lose sound within 5 seconds of entering the chat room. Then it takes between 3-5 minutes before I hear sound again, but then I only hear it for a few seconds. Then it goes away for another few minutes. Repeat. Over and over again.
I'm running Windows Vista on an Acer Aspire 380 with wireless cable modem. I keep losing sound in any voice/sound enabled chat and on any site that has videos. I have 1gig of ram, 300 gb hard drive, 32 bit operating system, 2 processor cores, directx version 9, realtek sound card. Everything is up to date, and firmware is up to date. My speed test is: download: 6.162 mbps and upload: 926 kbps.
When I do the ipconfig/all, it shows
Tunnel adapter local aera connection* 6: Media State: Media disconnected
description: teredo tunneling pseudo-interface
dhcp enabled: no
autoconfiguration enabled: yes
I don't know if this has anything to do with my sound issues on the chat program or not. ??
Also shows:
node type: hybrid
dhcp enabled: yes
autoconfiguration enabled: yes
default gateway: 192.168.1.1
dhcp server: 192.168.1.1
netbios over tcpip: enabled
If by chance it is a packet problem, how do I fix that?

Hi. Thanks for the quick reply. Yes, it just started recently and after not being able to fix the problem, I completely reformatted my computer and started with a fresh slate, but still having the same problems. The videos will not continue to load. They get less than half way and then just totally stop loading, therefore I only get to view the video up to the point where it stops loading. I just took your advice and I disconnected the router and connected my computer directly to the modem and my sound issues were fixed. I went into the voice chat and had sound for over 10 minutes (and then I disconnected) instead of the usual 5 seconds that it'd been. So is it the linksys that is causing this? If so, how can I fix it? Thank-you. Message Edited by nightrider7000 on 01-22-2008 11:34 AM
Message Edited by nightrider7000 on 01-22-2008 12:44 PM

Battlefield 2 huge sound Issue!Creative statement plea

Hi guys..
I had once this problem with the DVD playback if some can remember...i couldnt find any solutions so i formatted my system...then reinstalled everything and look there...wow extrem powerful sound,clean and crisp!!! Awesome **bleep**!
GTA San Andreas is working fine, now since 2 days i have Battelfield 2 and there is an enourmous sound issue...you play the game a bit..all of a sudden(before fluent gameplay,no problem)sounds start to stuck alot when you listen to the guy talking to its like hes talking in slow motion and the whole sound starts to get grazy...and the performance drops then down to a level where the game is just not playable...me friend has this game 2 and gues what he has the same problem and last guess...he has an audigy 2...suprised?
If anyone knows this problem and know how to fix it pls let me know...
and i would like to hear from creative a statement if this is their fault or ea's?
All other games run supreme,i mean that in the soundish way.
thx in advance

I had the same problem with the radio in my game. Turn it from hardware to software mode in the audio options. You'll still get good sound, but it might run a bit slower, as it uses more memory.

Newly installed Arch with gnome3 - Sound issue

Hello fellow archs!
I'm having such a huge issue at the moment with the sound.
Got alsa installed, and alsaconfig cant find a thing on my motherboard.
I will try to post the essential information so maybe someone will notice that I have done something wrong
lspci | grep Audio
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
Now one wierd part:
Doing aplay -l in gnome terminal
aplay -l
aplay: device_list:240: no soundcards found...
Straight from terminal before starting gnome up
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC889A Analog [ALC889A Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC889A Digital [ALC889A Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
I checked in modprobe and tried to follow the guide http://ubuntuforums.org/showpost.php?p= … ostcount=2 but couldnt find my ACL889 inside the list for model, I just tried something.
# /etc/modprobe.d/modprobe.conf (for v2.6 kernels)
alias snd-card-0 snd-hda-intel
alias sound-slot-0 snd-hda-intel
options snd-hda-intel model=6stack-dig
blacklist snd_intel8x0m
Please help! This new gnome3 looks really nice and nothing else except the sound issue seems to be wrong.
Thanks.

blargh wrote:
Hey guys, thanks for the help...
I was clicking around and noticed why i didnt get aplay -l correct. Wasnt it the group audio with my user..
But! I noticed something. I can't add my soundcard as my default one, but I can sure see it in alsamixer if I pick it.
I have been trying what the wiki been saying, either do it by kernel or use of the ~/.asoundrc which doesnt work as I get the message that the file is either to old or corrupted.
lsmod|grep '^snd' | column -t
snd_hda_codec_realtek 297871 1
snd_hda_intel 22186 0
snd_hda_codec 77703 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 6342 1 snd_hda_codec
snd_pcm 73736 2 snd_hda_intel,snd_hda_codec
snd_timer 19488 1 snd_pcm
snd 57384 6 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
snd_page_alloc 7161 2 snd_hda_intel,snd_pcm
ls -l /dev/snd
total 0
drwxr-xr-x 2 root root 60 Jun 16 18:23 by-path
crw-rw----+ 1 root audio 116, 8 Jun 16 18:23 controlC0
crw-rw----+ 1 root audio 116, 7 Jun 16 18:23 hwC0D2
crw-rw----+ 1 root audio 116, 6 Jun 16 18:24 pcmC0D0c
crw-rw----+ 1 root audio 116, 5 Jun 16 18:24 pcmC0D0p
crw-rw----+ 1 root audio 116, 4 Jun 16 18:24 pcmC0D1c
crw-rw----+ 1 root audio 116, 3 Jun 16 18:24 pcmC0D1p
crw-rw----+ 1 root audio 116, 2 Jun 16 18:23 pcmC0D2c
crw-rw---- 1 root audio 116, 1 Jun 16 18:23 seq
crw-rw----+ 1 root audio 116, 33 Jun 16 18:23 timer
Tried to remove pulseaudio by sudo pacman -Rd pulseaudio.. but it has so many depencies so it doesnt let me.
Any Ideas?
wrong approach - if using gnome-shell it does need to be there.
I not only have an idea ~ but i do know how to fix your problem (i just need to read up, because off-hand i can't tell you how to do it).
i ALWAYS disable PA - because it is crap! i also think it is stupid that gnome -developers decided to make it a static dependency, when there are so many issues with it.
i'll get back to you in a little while, okay? (sometime later tonight, i just got home from work and need to relax / eat / etc..
cheerz

I keep getting an error -54 when attempting to back up and restore. How do I correct the issue?

I keep getting an error -54 when attempting to back up my 4S and restore to my new 5S. How do I correct the issue?

Can you try again with Firefox 4.0b8 (desktop) and 4.0b3 (Android)? We have changed the way that Sync setup works, and it no longer requires entering the password and sync key by hand.
For details, see: http://blog.mozilla.com/services/2010/12/22/easy-setup-for-firefox-sync/

Best way to correct Tablespace fragmentation?

Dear DBAs,
The following query returns tablespace fragmentation:
select
tablespace_name,
count(*) free_chunks,
decode(
round((max(bytes) / 1024000),2),
null,0,
round((max(bytes) / 1024000),2)) largest_chunk,
nvl(round(sqrt(max(blocks)/sum(blocks))*(100/sqrt(sqrt(count(blocks)) )),2),
0) fragmentation_index
from
sys.dba_free_space
group by
tablespace_name
order by
2 desc, 1;
I have 3 tablespaces that are Locally Managed and suffer heavyt fragmentation. I just received the task of tuning this database and from what I could tell the fragmentation originated from a number of bad practices from past DBAs and also, some bizarre structures in certain tables.
My question is: what would be the best way to correct tablespace fragmentation LMT? I'm thinking export - drop - import to reorganize all blocks within the tablespace?

Alvaro wrote:
Dear DBAs,
The following query returns tablespace fragmentation:
select
tablespace_name,
count(*) free_chunks,
decode(
round((max(bytes) / 1024000),2),
null,0,
round((max(bytes) / 1024000),2)) largest_chunk,
nvl(round(sqrt(max(blocks)/sum(blocks))*(100/sqrt(sqrt(count(blocks)) )),2),
0) fragmentation_index
from
sys.dba_free_space
group by
tablespace_name
order by
2 desc, 1;
I have 3 tablespaces that are Locally Managed and suffer heavyt fragmentation. I just received the task of tuning this database and from what I could tell the fragmentation originated from a number of bad practices from past DBAs and also, some bizarre structures in certain tables.
My question is: what would be the best way to correct tablespace fragmentation LMT? I'm thinking export - drop - import to reorganize all blocks within the tablespace?In addition to what everyone else notes is the unlikelihood of fragmentation, there may be implicit compaction and skew in your data distribution that could be impacted by export/import. For better or worse.
What bad practices are you referring to? Sometimes practices are inappropriate, sometimes useless, sometimes perfectly understandable. If you don't know about the fragmentation issue, I wonder how well you judge practices. And yes, there are some really bad practices floating about.

Sound issues; slow response; usb ports unreliable and sd reader not working

The PC is a HP TouchSmart envy about 18 months old. Soon after purchasing I upgraded to Win 8.1.
About three or four months -ago probably after a Win update was installed- I began to have Sound issues (including not able to conect my external powered speakers any more- they used to work brilliantly and initially no sound at all but I went into settings and changed something and every now and again I have to do that again to get the PC speakers to work) ; slow response; usb ports unreliable, sd reader not working- as well as issues with the internet - the modem actually. It is easier to get on to a tablet and use the internet as my PC can be really slow. As well I have uninstalled Chrome and am using Explorer as this seems a little better but I miss Chrome.
I was advised by tech at Hervey Norman that I had to do a complete system restore but in order to do that I would need the recovery discs from HP? Is that correct? How do I do this?
PS I did not make recovery discs when I first purchased the machine. (Very sad!!!)
Help!!!
Alfriston

Hi again Alfriston,
Thank you for the clarification!
To return your computer's audio back to functional order, I recommend removing the audio driver from the operating system previous to upgrading to Windows 8.1, and installing the driver provided in this link.
If re-installing the driver does not resolve the issue, I suggest following the steps in this document on No Sound from the Speakers (Windows 8).
In regards to the USB ports, I recommend following this resource on Troubleshooting USB Connections (Windows 8), which should help consistently connect your USB devices to your computer.
To prevent your computer from lagging or responding in a slow manner, please follow the step in this document on Resolving Slow System Performance (Windows 8) to help improve the speed and efficiency of the operating system.
To further diagnose the issue with your desktop's SD card reader, I recommend following this resource on Using and Troubleshooting Memory Card Readers (Windows 8).
If your desktop still experiences issues with the audio, USB connections, speed and performance, as well as the SD card reader, I recommend returning your system back to a previous restore point. This can be done by following the steps in this document on Using Microsoft System Restore (Windows 8).
Should the problem continue, I suggest performing a backup and recovery of your operating system. This can be done by following the steps in this resource on Backing Up Your Files (Windows 8), as well as Performing an HP system recovery (Windows 8). This should return your system back to factory defaults.
If the issue persists, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Invoice Paid to INcorrect PO - Best way to correct

Situation - 2 PO's for same Vendor. Invoice Paid to Wrong PO
Is there any other way to correct an Invoice Paid to the wrong PO besides issueing a Credit Memo and Invoice at the same time (e.g., so a Payment does not go out the door). Also, caution must be followed to ensure both payment methods are the same for both the Credit Memo and Invoice.
Thanks!

Hi
I guess you receive different invoices for both the POs. The process of raising a credit memo is the best way to solve this issue. Did you think about cancelling the Invoice document in MR8M if it is feasible, here this will affect your stock accounts based upon the current stock position for the said Invoice/PO quanity.
One more additional check you can have is to use to activate the check box "check doubel invoice" below Tolerance Group in the Vendor payment Transactions Accounting view of vendor master. This will help you to restrict the entry of wrong PO attached to the invoice if you have already processed the Invoice (provided you are using the reference field in MIRO by entering the INVOICE number of the PO).
Regards
SAM

HT4199 I was trying to fax from my iMac to my HP office jet 8600, ran into a snag, so Ithough I would just print the document , then fax it from printer. I hit print and its telling me its offline, how do I correct this issue?

Hi, I tried to make my first fax from the imac, I went into apple pref. to print and scan to change printer but could not get it to fax.
So I thought I would just print the document place it on the HP Officejet 8600 and fax that way. Now its stuck on print stating I am offline?
How do I correct this issue?
Thanks..

Hello,
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
10.5/10.6/10.7/10.8 instructions...
In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
if you hold option and click the "-" tab it resets the printing system.
http://www.macosxhints.com/article.php?story=20031215144430486
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
Resetting the printing system in Mac OS X 10.5.x+++
    1.    To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
    2.    Choose System Preferences from the Apple menu.
    3.    Choose Print & Fax from the View menu.
    4.    Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..."       As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
http://support.apple.com/kb/ht1341
Reboot.

Sound issue on hp 2313ax

I have purchased this laptop in the feb , till now I havent got any solution of my sound issue in 2313ax
The problem is quite different , my laptop came with free dos , when I installed windows 8 64 bit ( pro ) , there is distortion in sound while playing any song or playing a game , the distortion is like a glitch or electrical distrubance and happens every now and then , it very frustating .
But the interesting part is when I installed windows 7 ultimate 64 bit , no problem at all , sound issue is like it never existed.
When I called up the HP customer care , they were telling me that this model has different motherboard for win7 and win8 , to be honest I havent heard such a ridiculous excuse , how is this possible ?
And even if this model has different motherboards for different OS , HP should mention it at the site too in the specifications .
Irony is that when you try to download the drivers for this laptop , you will find that it is given only for winodws 8 . LOL
And they say we have different motherboards for win 7 and win8 .
Anyways , also one issue that bugs me , in windows 7 in dxdiag , video memory is shown 993 mb only
windows 8 it was showing correct around 5048 mb .
This forum is my last hope , dont know what to do ?

Hello utsav21,
Please call HP and speak to a representative about your issue.
If you live in the US, contact HP Here.
If you are in another part of the world, begin Here.
Please let me know if they take care of you.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Way to correct sound issue?

Similar Messages

Maybe you are looking for