Way to Debug EJB Insert (Database) Errors?
Howdy y'all,
Would anyone happen to know of any trick to get the details of a transaction.commit() failure to print in the logs?
Specifically my problem is, Oracle reports there is a column which fails because the data being stuffed into it is too large - although the data checks out - I checked the lengths of the fields and the widths of the columns and printed the data to the logs so I can manually sift through and ensure none of it exceeds any maximums. It does not seem that any of the data is in violation of any size limits.
It would be excellent if there was a way to determine which column exactly failed - but I'm going to venture a guess that one is limited by what the host DB provides?
Many Thanks,
Alexandra
For some reason, the freeware database tools we use sometimes show column sizes incorrectly. Where I thought I had a varchar2(4000), I really only had varchar2(1024) - which was only made apparent to me when I went to our DBA out of sheer frustration, and he viewed the schema with his nice Oracle schema browser tool, which showed the correct column allocations.
So, of course the value of WC 1145 would be too wide for the column! (Having a way to determine the offending column at run time would have really reduced the debug time)
--Alexandra
Similar Messages
-
Debuging ejb's on wls using eclipse
Hi,
I am curently trying to find out ways to debug ejb's on wls. I am hoping to
use eclipse for this. Its has an option to connect to a remote vm via a port.
Can you please tell me how thi can be done.
PS: I am aware that WLS has to be setup so that a port may be open in debug mode.
But all that I know.
Thanks,
GavinYou should modify the weblogic startup to use the following parameters
(IntelliJ).
-Xdebug -Xnoagent -Djava.compiler=NONE -Xrunjdwp:transport=dt_socket,server=
y,suspend=n,address=500.
You might have to do something similar.
"Gavin" <[email protected]> wrote in message
news:3cba93f5$[email protected]..
>
Hi,
I am curently trying to find out ways to debug ejb's on wls. I amhoping to
use eclipse for this. Its has an option to connect to a remote vm via aport.
Can you please tell me how thi can be done.
PS: I am aware that WLS has to be setup so that a port may be open indebug mode.
But all that I know.
Thanks,
Gavin -
Debug EJB in JDev from JSP page
Hi,
I have read Oracle Note 120139.1 which has helped me debug EJB through JDeveloper. One problem is that it only works with a standard java client, not with a JSP page.
I have tried setting "debug file as" Oracle8i EJB/CORBA and making the debug class oracle.jdeveloper.debugger.ServletMain with the jsp page as the first parameter (similar to how JDeveloper actually kicks off debugging a JSP), however this fails with the following output:
Connecting to database service: sess_iiop://localhost:2481:IAS/etc/debugagent
Attaching Aurora VM agent to JDeveloper: 172.27.1.104, 3539
Aurora VM agent attached successfully.
Cannot run: oracle.jdeveloper.debugger.ServletMain.main()
null
java.lang.reflect.InvocationTargetException: java.lang.ArrayIndexOutOfBoundsException: 1
java.lang.Object java.lang.reflect.Method.invoke(java.lang.Object, java.lang.Object[])
void oracle.jdeveloper.debugger.CorbaDebugAgent.main(java.lang.String[])
If I add 4 "dummy" parameters, this error goes away, everything appears to work, except the page does not load in the browser which pops up and the breakpoint is never hit. I suppose this is to be expected as I don't actually know what those 4 extra parameters do as I don't have an API specification for the oracle.jdeveloper.debugger.ServletMain class.
Is it possible to do this (even in an unofficial "workaround fashion?). I would love to know what the additional parameters for the oracle.jdeveloper.debugger.ServletMain class are so I can try running it that way...
Cheers
NicBy Clear parameter if you mean to remove a request parameter from HttpServletRequest, then you can't. And also, I think this is not an actual solution to what you are trying to solve.
Moreover, you should better post questions related to JSP/Servlet in web tier here . -
Ways of debugging standard program
ways of debugging standard program to find out the solution!
Ways of starting the Debugger
Choosing different views
Choosing different execution options in the Debugger
Displaying source code in the Debugger
Setting and deleting breakpoints
Setting and deleting watchpoints
Stopping a program at a particular statement or event
Displaying and changing field contents at runtime
Displaying ABAP Objects and references
Displaying and positioning strings
Setting and deleting database locks
Opening the ABAP Editor, or Object Navigator
System settings and runtime warnings
Starting the Debugger
There are two possible strategies for starting the Debugger in the ABAP Workbench:
By setting breakpoints then running the program
By running the program in debugging mode.
Setting Breakpoints
A breakpoint is a signal in a specific line of the program source code. This signal indicates to the ABAP runtime processor to stop the program at the relevant line and start the ABAP Debugger. A distinction is made between static and dynamic breakpoints. For further information about the different types of breakpoints and how to use them, refer to Breakpoints.
Direct Processing
You can start the Debugger without previously having set breakpoints. This is the best procedure to use when you want to test a program right from the beginning. It is also a useful procedure if you are not overly familiar with the program and therefore are not sure where best to set breakpoints. You can start the Debugger as follows:
From the Object Navigator
Select a report or transaction and choose Program ® Test ® Debugging.
From the ABAP Editor
Choose Program ® Execute ® Debugging (or the Debugging pushbutton).
From any screen
Choose System ® Utilities ® Debug ABAP.
From any screen
Enter /h in the command field.
Display Modes in the Debugger
When you are debugging a program, there are various display modes that you can use. All of the display modes have the same structure. The top part of the screen displays an extract of the program source code. The bottom part displays the information specifically available in that display mode. There are also pushbuttons on the screen allowing you to switch to the most frequently-used display modes.
Display Modes Available Using Pushbuttons
Fields
The scrollable field display contains the contents of up to eight fields. The contents of the three most important system fields are always displayed. This is the default display mode in the Debugger. See also Processing Fields
Table
Displays the contents of an internal table. This mode allows you to display and edit the entries in an internal table. See also Processing Internal Tables
Breakpoints
A scrollable display containing up to 30 breakpoints. Next to each breakpoint is a counter. You can also delete breakpoints in this display. See also Managing Dynamic Breakpoints
Watchpoints
You can set a watchpoint for a field so that the program is interrupted whenever the value of that field changes. This display mode contains a list of watchpoints, the fields and programs to which they are assigned, the current values of the fields, and the conditions upon which the watchpoint is activated. See also Setting Watchpoints
Calls
This mode displays the current sequence of events, and the sequence of calls up to the current breakpoint. The last active call is displayed at the top of the list; previous calls are listed in reverse chronological order. When an event (for example, START-OF-SELECTION) concludes, it is deleted from the display.
Overview
This mode displays the structure of the program. It lists its events, subroutines, and modules, and shows which sections belong to which events. It also displays the section currently being processed.
Settings
This mode displays the current Debugger settings. You can change the settings by selecting or deselecting various options. For further information, refer to Settings and Warnings
Other Display Modes
You can access other display modes by choosing Goto ® Display data object.
Single field
Displays the contents and technical attributes of a field.
Structured
field
Displays the components of a structure, along with their contents and attributes. If you double-click a component, the system displays detailed information for it.
Strings
Display the content and current length of the string. You can also display part of the content by means of offset and length.
Internal table
Displays the type, line numbers and contents of an internal table.
Object
Displays the structure of an ABAP Object.
For further information on these displays, refer to Displaying Attributes and Displaying ABAP Objects
Checking System Programs for Errors
To check a program or program component that is part of the ABAP Workbench (for example, the Screen Painter), you must use the system Debugger. To start the system Debugger, choose System ® Utilities ® Debug System from any screen. To stop the system Debugger, choose Debugger ® Debugging off.
Displaying Program Attributes
You can display the attributes Fixed Point Arithmetic, System Program, and Unicode Checks of the program that has just been executed by choosing Goto ® Further Information ® Program Attributes.
Restarting the Debugger
If you choose Debugging ® Restart, debugging mode is stopped and the system takes you to the initial screen of the last transaction you called. If, for example, you started an ABAP program in debugging mode from transaction SE38 (ABAP Editor), choosing Debugging ® Restart will take you back to the screen titled ABAP Editor: Initial Screen. If you want to restart the program in debugging mode, choose Debugging.
Breakpoints
Apart from direct execution of an ABAP program in the Debugger, it is also possible to start the Debugger call by the exact setting of a breakpoint. This is achieved by setting one or more of these breakpoints in the program. A breakpoint is a signal at a particular point in the program that tells the ABAP runtime processor to interrupt processing and start the Debugger. The program runs normally until the breakpoint is reached.
There is also a special kind of breakpoint called a watchpoint. When you use watchpoints, the Debugger is not activated until the contents of a particular field change. For further information, refer to Watchpoints.
Breakpoint Variants
The Debugger contains different breakpoint variants:
Static
The BREAK-POINT statement in an ABAP program. Static breakpoints are not normally user-specific. However, you can make them user-specific.
Directly-set
dynamic breakpoints
Can be set in the ABAP Editor or the Debugger. Dynamic breakpoints are always user-specific, and are deleted when you log off from the R/3 System.
Breakpoints
at statement
The Debugger stops the program directly before the specified statement is executed.
Breakpoints
at subroutine
The Debugger stops the program directly before the specified subroutine is called.
Breakpoint at function module
The Debugger stops the program directly before the specified function module is called.
Breakpoint at method
The Debugger stops the program directly before the specified method is called.
Breakpoints at system exceptions
The Debugger stops the program directly after a system exception, that is, after a runtime error has been intercepted.
Static Breakpoints
Static breakpoints are not normally user-specific. Once a user has inserted the statement BREAK-POINT or BREAK name in an ABAP program, the system always interrupts the program at that point for that user or only for the user name. This procedure is only useful in the development phase of an application, when the program execution is always to be interrupted at the same place. For further information, refer to Static Breakpoints.
In HTTP sessions, a static breakpoint is skipped if you did not set additional dynamic HTTP breakpoints in the editor of a BSP page. Instead, a corresponding system log entry is written, which can be checked using transaction SM21.
Dynamic Breakpoints
Dynamic breakpoints are user-specific. Therefore, you should use them if you only want the program to be interrupted when you run it yourself, not when it is being executed by other users. All dynamic breakpoints are deleted when you log off from the R/3 System.
Dynamic breakpoints are more flexible than static breakpoints, because you can deactivate or delete them at runtime. They have the following advantages:
You do not have to change the program code
You can set them even when the program is locked by another programmer
You can define a counter that only activates the breakpoint after it has been reached
Special dynamic breakpoints are useful when you want to interrupt a program directly before a particular ABAP statement, a subroutine, or an event, but do not know exactly where to find it in the source code. Event here is used to refer to the occurrence of a particular statement, for example, or calling up a method. Special dynamic breakpoints are user-specific. You can only set them in the Debugger. For further information, refer to Dynamic Breakpoints.
In HTTP sessions, the system stops both at static and dynamic breakpoints if a dynamic breakpoint was set in the editor of a BSP page before program execution.
Lifetime and Transfer of Breakpoints
A static breakpoint remains intact as long as the BREAK-POINT or BREAK-POINT name statement is not removed from the source code. Without saving, dynamic breakpoints only remain intact in the relevant internal session. However, they are effective during the entire user session, if they are saved by choosing Breakpoints ® Save in the ABAP Debugger. For more details on the subject of sessions and user sessions, refer to Modularization Techniques in the ABAP keyword documentation.
If you call an HTTP session during a user session, only the HTTP breakpoints are loaded when the HTTP session is started. You activate HTTP debugging in the ABAP Editor by choosing Utilities ® Settings ® HTTP Debugging. Depending on the setting, the system then displays either the HTTP or standard breakpoints in the Editor.
If you call an update session during a user session, breakpoints that were defined beforehand in the calling processing unit are copied to the new update session, where they can be displayed under Breakpoints. If, in the ABAP Debugger, you check Update Debugging under Settings and then, for example, call the update module func using CALL FUNCTION func IN UPDATE TASK, a new window is opened in which you can debug this function module in the update session. All the breakpoints that were set in the calling processing unit can also be processed here.
Breakpoints at Statements
You can use this special kind of dynamic breakpoint to interrupt a program directly before an ABAP statement is processed.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint at an ABAP statement:
1.Choose Breakpoint ® Breakpoint at ® Statement...
The following dialog box appears:
2.Enter the ABAP statement.
The system sets a breakpoint at all points in the program at which the ABAP statement occurs.
3.Choose ENTER.
The breakpoint applies to all lines containing the specified statement.
Result
The system confirms the breakpoint and adds it to the list in the display. When you finish your debugging session, the breakpoint is automatically deleted unless you have explicitly saved it.
Breakpoints at Subroutines
You can use this special kind of dynamic breakpoint to interrupt a program directly before a subroutine is called.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint for a subroutine:
Choose Breakpoint ® Breakpoint at ® Event/Subroutine.
The following dialog box then appears:
Enter the name of the subroutine before which you want to interrupt the program. By default, the Program field contains the name of the program that is currently active. The system sets a breakpoint wherever the specified subroutine occurs in the program code.
Choose ENTER.
Result
The system confirms the breakpoint. The breakpoint is added to the breakpoints displayed.
Breakpoints at Function Module
You can use this kind of dynamic breakpoint to interrupt a program directly before a function module is called.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint for a function module:
Choose Breakpoint ® Breakpoint at ® Function module...
The following dialog box appears:
Enter the name of the function module before which you want to interrupt the program. The system sets a breakpoint wherever the specified event, module pool, or subroutine occurs in the program code.
Choose ENTER.
Result
If you entered a valid function module name, the system confirms that the breakpoint has been set. If the function module exists in the system, the new breakpoint is added to the display list.
Breakpoints at Methods
You can use this special kind of dynamic breakpoint to interrupt a program directly before a method is called.
Prerequisites
You must be already running the program in the debugger.
Procedure
To set a breakpoint for methods:
1. Choose Breakpoint ® Breakpoint at ® Method...
The following dialog box then appears:
2. Enter the name of the method and class before which you want to interrupt the program. A breakpoint is then set each time the specified processing block appears in the source code.
3. Choose ENTER.
Result
The system confirms the breakpoint. The breakpoint is added to the list in the display.
Breakpoints at System Exceptions
You can use this special form of dynamic breakpoint to interrupt a program immediately after a runtime error has occurred.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint at a system exception:
Choose Breakpoint ® Breakpoint at ® System exception.
Result
The system confirms the breakpoint. The breakpoint is added to the breakpoints displayed.
When a system exception is triggered, a warning triangle appears in the line containing the statement that caused it. If you double-click the warning triangle, the internal name of the runtime error appears.
Static Breakpoints
You should only use static breakpoints during the development phase of an application. You must remove them from your program before you transport it.
Setting Breakpoints
To set a static breakpoint, use the ABAP statement BREAK-POINT . Place the breakpoint in the line at which you want to interrupt the program.
program RSDEBUG_01.
if SY-SUBRC 0.
break-point.
endif.
When you run the program, the runtime processor interrupts it when the breakpoints occur. You can number your breakpoints to make them easier to identify ( BREAK-POINT 1, BREAK-POINT 2 ).
Static breakpoints are not normally user-specific. The program is, therefore, always interrupted as soon as the runtime processor reaches the line containing the breakpoint. The program is interrupted regardless of the user who executes it.
However, you can set user-specific static breakpoints using the BREAK statement followed by your user name. For example, if you use the statement BREAK SMITH , the program is only interrupted when user Smith runs it. Although user-specific breakpoints appear in the program code, they are not active when other users run the program. You should, however, be careful if an application is being used by several users with the same name.
Deleting Breakpoints
Since static breakpoints apply to all users, you must remove them from the program once you have finished testing it. In the ABAP Editor, you can find breakpoints quickly by choosing Utilities ® Global search. You can also use the Extended Program Check to find them.
If you do not remove static breakpoints from your program, they will be transported to your production system. This could cause serious problems in the production system.
Dynamic Breakpoints
You can set up to 30 dynamic breakpoints without changing the program code. Dynamic breakpoints can be set either in the ABAP Editor or directly in the Debugger.
Setting Dynamic Breakpoints in the ABAP Editor
You can set dynamic breakpoints in the ABAP Editor regardless of whether you are in display or change mode. You can also set breakpoints directly from within the Debugger at runtime. To set a dynamic breakpoint in the ABAP Editor:
Position the cursor on the line of the source code at which you want to set the breakpoint.
Choose Utilities ® Breakpoints ® Set or the Stop icon. The system confirms that the breakpoint has been set.
To display a list of all dynamic breakpoints in a program, choose Utilities ® Breakpoints ® Display. You can use this list to navigate to a particular breakpoint or to delete one or more breakpoints from the program.
Setting Dynamic Breakpoints in Debugging Mode
To set a dynamic breakpoint in the Debugger:
Position the cursor on the line in which you want to set the breakpoint.
Select the line by double-clicking it or choosing Breakpoint ® Set/delete.
The system sets the breakpoint, and displays a small stop sign to the left of the relevant line. If the line already contained a breakpoint, it is deleted.
When you finish your debugging session, the breakpoint is automatically deleted unless you have explicitly saved it.
Saving Breakpoints
If you want to leave the Debugger temporarily, you can save your dynamic breakpoints so that they are still active when you return to the Debugger within the same terminal session.
To save the breakpoints that you have set in the Debugger:
Choose Breakpoint ® Save.
The system saves all of the breakpoints that you have set in the current program. These breakpoints will remain active until you either explicitly delete them or log off from the system.
You can also delete breakpoints that you have saved:
By deleting individual breakpoints from the display and then saving again. In this case, only your selected breakpoints will be deleted.
By choosing Breakpoint ® Delete all. In this case, the system deletes all dynamic breakpoints.
Managing Dynamic Breakpoints
The ABAP Debugger provides a convenient user interface for managing breakpoints. To open the breakpoint display, choose Breakpoints, or, from the menu, Goto ® Control debugging ® Breakpoints.
Example
Functions
This display mode contains the following functions for breakpoints:
Breakpoint Display
The scrollable breakpoint display contains up to 30 dynamic breakpoints. For breakpoints that you set directly, the program name and line number at which the breakpoint occurs are displayed. For special breakpoint forms, the list displays the statements, events, subroutines, and module calls at which the relevant breakpoints are set.
Counter
In the breakpoint display, you can specify a counter. When you use a counter, the breakpoint is not activated until it has been reached a specified number of times. For example, if you enter 5 for the counter, the breakpoint is not activated until it is reached for the fifth time. After the breakpoint has been activated, it remains so, and the counter no longer appears in the breakpoint display.
Deleting Breakpoints
Position the cursor on the breakpoint that you want to delete, and either double-click the line or choose Breakpoint ® Set/delete. To delete all breakpoints, choose Breakpoint ® Delete all.
Activating and Deactivating Breakpoints
Position the cursor on the breakpoint that you want to activate or deactivate and choose Breakpoint ® Activate/deactivate.
Watchpoints
Like a breakpoint, a watchpoint is an indicator in a program that tells the ABAP runtime processor to interrupt the program at a particular point. Unlike breakpoints, however, watchpoints are not activated until the contents of a specified field change. Watchpoints, like dynamic breakpoints, are user-specific, and so do not affect other users running the same program. You can only define watchpoints in the Debugger.
Use
You set watchpoints in the Debugger to monitor the contents of specific fields. They inform you when the value of a field changes. When the value changes, the Debugger interrupts the program.
Features
You can set up to five watchpoints in a program.
See also Setting Watchpoints.
You can also specify the conditions on which a watchpoint is to become active.
You can specify logical conditions between up to five conditional watchpoints.
See Specifying a Logical Expression.
You can define watchpoints as either local or global. If you define a global watchpoint, it is active in all called programs. Local watchpoints are only active in the specified program.
You can change and delete watchpoints.
See Changing Watchpoints.
You can use watchpoints to display changes to the references of strings, data and object references, and internal tables.
See Memory Monitoring with Watchpoints
Setting Watchpoints
If you want to interrupt a program when the contents of a field or structure change, use a watchpoint. You can set up to five watchpoints, including watchpoints for strings.
A watchpoint can be either local or global. Local watchpoints are only valid in the specified program. Global watchpoints are valid in the specified program, and also in all the other programs it calls.
Procedure
To set a watchpoint, start the Debugger and proceed as follows:
Choose Breakpoint ® Create watchpoint or the corresponding pushbutton. The Create Watchpoint dialog box appears:
Decide whether you want to set a local or global watchpoint.
Enter the program and the name of the field for which you want to set the watchpoint. In the Program field, the name of the program currently running is always defaulted.
If you want your watchpoint to be activated each time the contents of the field change, the definition is now complete, and you can return to the Debugger by pressing ENTER .
To create a conditional watchpoint, that is only activated when a particular situation arises, choose one of the following relational operators.
Operator
Meaning
<
Less than
<=
Less than or equal
=
Equal
<>
Not equal
=
Greater than or equal
Greater than
You can use the Comparison field option to specify whether the comparison is to be carried out with a value that you specify or with the contents of another field. Depending on your choice from step 6, enter a value or a field for the comparison.
Result
The system confirms the watchpoint and adds it to the list in the display. When you finish your debugging session, the watchpoint is automatically deleted unless you have explicitly saved it.
Specifying Logical Links
If you have more than one conditional watchpoint, you can specify a logical link between them:
OR
Only one of the specified conditions must be met
AND
All of the conditions must be met.
Changing Watchpoints
Choose Goto ® Control debugging ® Watchpoints or the Watchpoints pushbutton to display the watchpoint list. The following dialog box appears:
Choose the pencil icon in the line containing the watchpoint you want to change.
Change the watchpoint attributes in the Create/Change Watchpoint.
Choose ENTER .
Deleting Watchpoints
You cannot delete watchpoints by choosing Breakpoint ® Delete or Breakpoint ® Deactivate/activate. Instead, proceed as follows:
Choose Goto ® Control debugging ® Watchpoints or the Watchpoints pushbutton to display the watchpoint list.
Choose the trashcan icon in the line containing the watchpoint you want to delete.
Memory Monitoring with Watchpoints
You can use watchpoints to display changes to the references of strings, data and object references, and internal tables. By placing an ampersand (&) in front of the object name, you can display the reference in question in hexadecimal format. With internal tables, you can also display the table header by placing an asterisk (*) at the beginning of the name.
&objectname
Displays the references of strings, internal tables as well as data and object references
*itab
Displays the table header of the internal table itab
Example
If a watchpoint is set for the object in question at runtime, the program is stopped as soon as the reference is changed. A short dump can be intercepted in this way to stop the program being terminated when the memory is overwritten.
Analyzing Source Code
The Debugger contains an extensive range of functions that help you to analyze the source code of a program. You can step through the source code of a program in four different ways. For further information, refer to Stepping Through the Source Code
For information about functions within the source code display, see Displaying the Source Code
There are also different display modes that provide various information and display the contents of individual fields, tables, and so on:
Reward if usefull -
Getting database error while updating data to mysql table.
user registration.jsp < jsp user view to get input >
<?xml version="1.0" encoding ="UTF-8"?>
<%@ taglib prefix="c" uri="http://java.sun.com/jsp/jstl/core" %>
<%@ taglib prefix="fmt" uri="http://java.sun.com/jsp/jstl/fmt" %>
<%@ taglib prefix="sql" uri="http://java.sun.com/jsp/jstl/sql" %>
<%@ taglib prefix="x" uri="http://java.sun.com/jsp/jstl/xml" %>
<%@ taglib prefix="fn" uri="http://java.sun.com/jsp/jstl/functions" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html>
<head>
<title>Registeres USers Login Page</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<body>
<%--debugging code--%>
<%@ include file="debug.jsp" %>
<table width="1049" cellpadding="5" align="center">
<tr>
<td width="2378"><div align="center">
<h2 align="center"> User Registration</h2>
<p>
<c:url var="HmePgeURL" value="/cw/router/home" scope="page"/>
<a href="${HmePgeURL}">Home</a> <c:url var='BSPgeURL' value='/cw/router/login' scope='page'/>
<a href="${BSPgeURL}">Buy or Sell</a>
</p>
</div></td>
</tr>
</table>
<p align="center"> </p>
<p>This website is only open to members of the De MontFort University.
You will need a current @learner.dmu.ac.uk e-mail address in order to register.</p>
<p> If you've already registered for one site you do not need to register again </p>
<c:url value="/cw/router/userregistration" var="UregPgeURL" scope="page"/>
<form name="frmregister" method="post" action="${UregPgeURL}">
<div>
<table width="726" height="285" border="0" align="left" cellpadding="2" cellspacing="0">
<tr>
<td width="157" align="right" >Name:</td>
<td width="561" > <input name="txtname" type="text" value="${param.txtname}"/> </td>
</tr>
<c:if test="${!empty requestScope.reqInvalidUserName}">
<c:out value="${requestScope.reqInvalidUserName}"/>
</c:if>
<tr>
<td width="157" align="right" >Department</td>
<td align="left" >
<select name="txtdepartment" value="${param.txtdepartment}" >
<option></option>
<option value="Faculty of Art and Design">Faculty of Art and Design</option>
<option value="Faculty of Business and Law">Faculty of Business and Law</option>
<option value="Faculty of Computing Sciences and Engineering">Faculty of Computing Sciences and Engineering</option>
<option value="Faculty of Health and Life Sciences">Faculty of Health and Life Sciences</option>
<option value="Faculty of Humanities">Faculty of Humanities</option>
</select>
</td>
</tr>
<tr>
<td align="right" >Programme</td>
<td ><input type="text" name="txtprogramme" value="${param.txtprogramme}" />
(eg: BIS,SE) </td>
</tr>
<tr>
<td align="right" >Telephone Number: </td>
<td ><input name="txtphonenum" type="text" value="${param.txtphonenum}" /></td>
</tr>
<tr>
<td align="right" >Date Of Birth: </td>
<td ><input name="txtday" type="text" size="15" value="${param.txtdob}" />(of format YYYY-MM-DD)</td>
</tr>
<tr>
<td align="right" >Username</td>
<td align="left" >
<input name="txtuserid" type="text" size="15" value="${param.txtuserid}" />
(eg. p07269027 from [email protected])</td>
<c:if test="${!empty requestScope.reqInvalidUserId}">
<c:out value="${requestScope.reqInvalidUserId}"/>
</c:if>
</tr>
<tr>
<td align="right" >Password</td>
<td align="left" >
<input name="txtpassword" type="password" size="15" value="${param.txtpassword}" />
</td></tr>
<c:if test="${!empty requestScope.reqInvalidPassword}">
<c:out value="${requestScope.reqInvalidPassword}"/>
</c:if>
<tr>
<td align="right" >Confirm Password </td>
<td align="left" >
<input name="txtpasswordconf" type="password" size="15" />
</td>
</tr>
<tr>
<td colspan="2" align="center">
<input name="frmsubmit" type="submit" value="Register User" />
<input type="reset" name="Reset" value="Reset" />
</td>
</tr>
</table>
<c:if test="${!empty requestScope.reqQueryErrorMessage}">
<c:out value="${requestScope.reqQueryErrorMessage}"/>
</c:if>
<c:if test="${!empty requestScope.reqInvalidUpdate}">
<c:out value="${requestScope.reqInvalidUpdate}"/>
</c:if>
</div>
</form>
</body>
</html>
proregistration.jsp ( registration process jsp)
<?xml version="1.0" encoding ="UTF-8"?>
<%@ taglib prefix="c" uri="http://java.sun.com/jsp/jstl/core" %>
<%@ taglib prefix="fmt" uri="http://java.sun.com/jsp/jstl/fmt" %>
<%@ taglib prefix="sql" uri="http://java.sun.com/jsp/jstl/sql" %>
<%@ taglib prefix="x" uri="http://java.sun.com/jsp/jstl/xml" %>
<%@ taglib prefix="fn" uri="http://java.sun.com/jsp/jstl/functions" %>
<%-- \WEB-INF\jsp\cwjsps\probooksforsale.jsp --%>
<%-- Probookforsale --%>
<%-- skip field validation and provide blankpage if first time in --%>
<c:if test="${empty param.frmsubmit}">
<c:set var="reqOutcome" scope="request" value=" "/>
<jsp:forward page="/WEB-INF/jsp/cwjsps/userregistration.jsp"/> <%-- initial request --%>
</c:if>
<%-- validate txtname --%>
<c:if test="${empty param.txtname}">
<c:set var="reqInvalidUserName" scope="request" value= "User Name Cannot Be Empty"/>
</c:if>
<%-- validate txtuserid --%>
<c:if test="${empty param.txtuserid}">
<c:set var="reqInvalidUserId" scope="request" value= "User ID Cannot Be Empty"/>
</c:if>
<%-- validate txtpassword--%>
<c:if test="${empty param.txtpassword}">
<c:set var="reqInvalidPassword" scope="request" value= "Password Cannot Be Empty"/>
</c:if>
<%-- if userid invalid or username invalid --%>
<%-- redisplay form with originl typed-in data and with errors marked --%>
<c:if test="${empty param.txtname or empty param.txtuserid}">
<c:set var="reqOutcome" scope="request" value= "failure" />
<jsp:forward page="/WEB-INF/jsp/cwjsps/userregistration.jsp"/> <%-- failure --%>
</c:if>
<c:catch var="pgeQueryError">
<sql:update var="pgeRowCount" scope="page" >
<%-- insert details to trader table --%>
INSERT INTO trader(dbTraderName,dbTraderDepartment,dbTraderProgramme,dbTraderPhoneNum ,dbTraderDOB,dbTraderPNumber,dbTraderPwd)
VALUES(?,?,?,?,?,?,?)
<sql:param value="${param.txtname}"/>
<sql:param value="${param.txtdepartment}"/>
<sql:param value="${param.txtprogramme}"/>
<sql:param value="${param.txtphonenum}"/>
<sql:param value="${param.txtdob}"/>
<sql:param value="${param.txtuserid}"/>
<sql:param value="${param.txtpassword}"/>
</sql:update>
</c:catch>
<%-- check For query Error --%>
<c:if test="${not empty pgeQueryError}">
<c:choose>
<%-- check duplicate record --%>
<c:when test="${pgeQueryError.rootCause.errorCode =='1062'}">
<c:set var="reqQueryErrorMessage" scope="request" value="User already Registered - Duplicate Record" />
<jsp:forward page="/WEB-INF/jsp/cwjsps/login.jsp"/>
</c:when>
<c:otherwise>
<%-- database error --%>
<c:set var="reqQueryErrorMessage" scope="request" value="Database Error" />
<jsp:forward page="/WEB-INF/jsp/cwjsps/userregistration.jsp"/>
</c:otherwise>
</c:choose>
<c:set var="reqOutcome" scope="request" value="failure" />
<jsp:forward page="/WEB-INF/jsp/cwjsps/userregistration.jsp"/>
</c:if>
<%-- check For no rows returned --%>
<c:if test="${pgeRowCount !=1}">
<c:set var="reqInvalidUpdate" scope="request" value="*** rowCount not = 1"/>
<c:set var="reqOutcome" scope="request" value="failure"/>
<jsp:forward page="/WEB-INF/jsp/cwjsps/userregistration.jsp"/> <%-- failure --%>
</c:if>
<%-- Otherwise --%>
<%-- Outcome is success --%>
<c:if test="${pgeRowCount ==1}">
<c:set var="reqOutcome" scope="request" value="success" />
<jsp:forward page="/WEB-INF/jsp/cwjsps/login.jsp"/> <%-- success --%>
</c:if>
router.jsp ( maps the jsp page based on success and failure)
<?xml version="1.0" encoding ="iso-8859-1"?>
<%-- /WEB-INF/jsp/cwjsps/router.jsp --%>
<%@ taglib prefix="c" uri="http://java.sun.com/jsp/jstl/core" %>
<%@ taglib prefix="fmt" uri="http://java.sun.com/jsp/jstl/fmt" %>
<%@ taglib prefix="sql" uri="http://java.sun.com/jsp/jstl/sql" %>
<%@ taglib prefix="x" uri="http://java.sun.com/jsp/jstl/xml" %>
<%@ taglib prefix="fn" uri="http://java.sun.com/jsp/jstl/functions" %>
<%-- setup session if one does not exist --%>
<%@ page session="true" %>
<%-- set up debug variable --%>
<c:set var="sessDebug" scope="session" value="true"/>
<%-- get pathinfo information from the request --%>
<%-- this defines which use case has been requested --%>
<c:set var="pgePathInfo" scope="page" value="${pageContext.request.pathInfo}" />
<%-- uc02 : Login --%>
<c:if test="${pageScope.pgePathInfo =='/home'}" >
<jsp:forward page="/WEB-INF/jsp/cwjsps/home.jsp"/>
</c:if>
<c:if test="${pageScope.pgePathInfo =='/login'}" >
<jsp:forward page="/WEB-INF/jsp/cwjsps/prologin.jsp"/>
</c:if>
<%-- uc01 : View Details Of Books For Sale --%>
<c:if test="${pageScope.pgePathInfo =='/viewbooksforsale'}" >
<jsp:forward page="/WEB-INF/jsp/cwjsps/probooksforsale.jsp"/>
</c:if>
<%-- uc01 : process User registration--%>
<c:if test="${pageScope.pgePathInfo =='/userregistration'}" >
<jsp:forward page="/WEB-INF/jsp/cwjsps/proregistration.jsp"/>
</c:if>
<%-- uc01 : debug --%>
<c:if test="${pageScope.pgePathInfo =='/debug'}" >
<jsp:forward page="/WEB-INF/jsp/cwjsps/debug.jsp"/>
</c:if>
<%-- uc01 : view Traders Own View --%>
<c:if test="${pageScope.pgePathInfo =='/Traderhomepage'}" >
<jsp:forward page="/WEB-INF/jsp/cwjsps/Traderhomepage.jsp"/>
</c:if>
<%-- otherwise --%>
<jsp:forward page="/WEB-INF/jsp/cwjsps/home.jsp"/> &nbHi..
Correcting the record from PSA is temporary solution depends on u r criticality....
Only Solution is to correct the record at source system level... Generally Material master data record is imp so just try to fix temporarily so that it vl not affect u r loads until it is corrected at Source System level..
Note: inform the problem to u r co-ordinator and try to correct it ASAP... and explain the temp solution(PSA correction)...
cheers.. -
Akonadi database error code: 1062 Duplicate entry for key
Since my email provider migrated their webmail platform, I keep getting an error each time kmail attempts to get emails from their imap server: could not create collection INBOX resourceid: 17
I double checked the provided imap settings have not changed and are correct : imap.laposte.net port 993 using SSL/TLS
As you can see in the pasted akonadi self-test report below, I have a few errors related to innodb, the absence of mysql tables in local/share/akonadi/db_data/ and the table performance_schema having the wrong structure. Those have been there for several months but I've been unable to fix them and I didn't care because my email was working. I suppose they are unrelated to my current issues.
Any help I can get is much welcome.
Akonadi Server Self-Test Report
===============================
Test 1: SUCCESS
Database driver found.
Details: The QtSQL driver 'QMYSQL' is required by your current Akonadi server configuration and was found on your system.
File content of '/home/the_user/.config/akonadi/akonadiserverrc':
[%General]
Driver=QMYSQL
[QMYSQL]
Name=akonadi
Host=
Options="UNIX_SOCKET=/tmp/akonadi-the_user.kKTLSR/mysql.socket"
ServerPath=/usr/bin/mysqld
StartServer=true
User=
Password=
[Debug]
Tracer=null
[QPSQL]
StartServer=true
Name=akonadi
Host=
User=
Password=
Port=5432
[SQLITE]
Name=akonadi
Test 2: SUCCESS
Akonadi is not running as root
Details: Akonadi is not running as a root/administrator user, which is the recommended setup for a secure system.
Test 3: SUCCESS
MySQL server found.
Details: You have currently configured Akonadi to use the MySQL server '/usr/bin/mysqld'.
Make sure you have the MySQL server installed, set the correct path and ensure you have the necessary read and execution rights on the server executable. The server executable is typically called 'mysqld'; its location varies depending on the distribution.
Test 4: SUCCESS
MySQL server is executable.
Details: MySQL server found: /usr/bin/mysqld Ver 10.0.14-MariaDB-log for Linux on x86_64 (MariaDB Server)
Test 5: ERROR
MySQL server log contains errors.
Details: The MySQL server error log file '<a href='/home/the_user/.local/share/akonadi/db_data/mysql.err'>/home/the_user/.local/share/akonadi/db_data/mysql.err</a>' contains errors.
File content of '/home/the_user/.local/share/akonadi/db_data/mysql.err':
141129 9:34:33 [Warning] You need to use --log-bin to make --binlog-format work.
2014-11-29 09:34:33 7f5b81d0b780 InnoDB: Warning: Using innodb_additional_mem_pool_size is DEPRECATED. This option may be removed in future releases, together with the option innodb_use_sys_malloc and with the InnoDB's internal memory allocator.
141129 9:34:33 [Note] InnoDB: Using mutexes to ref count buffer pool pages
141129 9:34:33 [Note] InnoDB: The InnoDB memory heap is disabled
141129 9:34:33 [Note] InnoDB: Mutexes and rw_locks use GCC atomic builtins
141129 9:34:33 [Note] InnoDB: Memory barrier is not used
141129 9:34:33 [Note] InnoDB: Compressed tables use zlib 1.2.8
141129 9:34:33 [Note] InnoDB: Using Linux native AIO
141129 9:34:33 [Note] InnoDB: Using CPU crc32 instructions
141129 9:34:33 [Note] InnoDB: Initializing buffer pool, size = 80.0M
141129 9:34:33 [Note] InnoDB: Completed initialization of buffer pool
141129 9:34:33 [Note] InnoDB: Highest supported file format is Barracuda.
141129 9:34:33 [Note] InnoDB: The log sequence numbers 66340678877 and 66340678877 in ibdata files do not match the log sequence number 66344113222 in the ib_logfiles!
141129 9:34:33 [Note] InnoDB: Database was not shutdown normally!
141129 9:34:33 [Note] InnoDB: Starting crash recovery.
141129 9:34:33 [Note] InnoDB: Reading tablespace information from the .ibd files...
141129 9:34:33 [Note] InnoDB: Restoring possible half-written data pages
141129 9:34:33 [Note] InnoDB: from the doublewrite buffer...
141129 9:34:34 [Note] InnoDB: 128 rollback segment(s) are active.
141129 9:34:34 [Note] InnoDB: Waiting for purge to start
141129 9:34:34 [Note] InnoDB: Percona XtraDB (http://www.percona.com) 5.6.20-68.0 started; log sequence number 66344113222
141129 9:34:34 [Note] Plugin 'FEEDBACK' is disabled.
141129 9:34:34 [ERROR] Can't open and lock privilege tables: Table 'mysql.servers' doesn't exist
141129 9:34:34 [Warning] Can't open and lock time zone table: Table 'mysql.time_zone_leap_second' doesn't exist trying to live without them
141129 9:34:34 [ERROR] Native table 'performance_schema'.'cond_instances' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_waits_current' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_waits_history' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_waits_history_long' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_waits_summary_by_host_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_waits_summary_by_instance' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_waits_summary_by_thread_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_waits_summary_by_user_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_waits_summary_by_account_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_waits_summary_global_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'file_instances' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'file_summary_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'file_summary_by_instance' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'host_cache' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'mutex_instances' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'objects_summary_global_by_type' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'performance_timers' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'rwlock_instances' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'setup_actors' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'setup_consumers' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'setup_instruments' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'setup_objects' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'setup_timers' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'table_io_waits_summary_by_index_usage' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'table_io_waits_summary_by_table' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'table_lock_waits_summary_by_table' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'threads' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_stages_current' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_stages_history' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_stages_history_long' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_stages_summary_by_thread_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_stages_summary_by_account_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_stages_summary_by_user_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_stages_summary_by_host_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_stages_summary_global_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_statements_current' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_statements_history' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_statements_history_long' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_statements_summary_by_thread_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_statements_summary_by_account_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_statements_summary_by_user_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_statements_summary_by_host_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_statements_summary_global_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_statements_summary_by_digest' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'users' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'accounts' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'hosts' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'socket_instances' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'socket_summary_by_instance' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'socket_summary_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'session_connect_attrs' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'session_account_connect_attrs' has the wrong structure
141129 9:34:34 [Warning] Failed to load slave replication state from table mysql.gtid_slave_pos: 1146: Table 'mysql.gtid_slave_pos' doesn't exist
141129 9:34:34 [Note] Reading of all Master_info entries succeded
141129 9:34:34 [Note] Added new Master_info '' to hash table
141129 9:34:34 [Note] /usr/bin/mysqld: ready for connections.
Version: '10.0.14-MariaDB' socket: '/tmp/akonadi-the_user.kKTLSR/mysql.socket' port: 0 MariaDB Server
2014-11-29 09:34:34 7f5b81c77700 InnoDB: Error: Table "mysql"."innodb_table_stats" not found.
141129 15:14:56 [Warning] Aborted connection 58 to db: 'akonadi' user: 'the_user' host: '' (Unknown error)
Test 6: SUCCESS
MySQL server default configuration found.
Details: The default configuration for the MySQL server was found and is readable at <a href='/usr/share/config/akonadi/mysql-global.conf'>/usr/share/config/akonadi/mysql-global.conf</a>.
File content of '/usr/share/config/akonadi/mysql-global.conf':
# Global Akonadi MySQL server settings,
# These settings can be adjusted using $HOME/.config/akonadi/mysql-local.conf
# Based on advice by Kris Köhntopp <[email protected]>
[mysqld]
# strict query parsing/interpretation
# TODO: make Akonadi work with those settings enabled
# sql_mode=strict_trans_tables,strict_all_tables,strict_error_for_division_by_zero,no_auto_create_user,no_auto_value_on_zero,no_engine_substitution,no_zero_date,no_zero_in_date,only_full_group_by,pipes_as_concat
# sql_mode=strict_trans_tables
# DEBUGGING:
# log all queries, useful for debugging but generates an enormous amount of data
# log=mysql.full
# log queries slower than n seconds, log file name relative to datadir (for debugging only)
# log_slow_queries=mysql.slow
# long_query_time=1
# log queries not using indices, debug only, disable for production use
# log_queries_not_using_indexes=1
# mesure database size and adjust innodb_buffer_pool_size
# SELECT sum(data_length) as bla, sum(index_length) as blub FROM information_schema.tables WHERE table_schema not in ("mysql", "information_schema");
# NOTES:
# Keep Innob_log_waits and keep Innodb_buffer_pool_wait_free small (see show global status like "inno%", show global variables)
#expire_logs_days=3
#sync_bin_log=0
# Use UTF-8 encoding for tables
character_set_server=utf8
collation_server=utf8_general_ci
# use InnoDB for transactions and better crash recovery
default_storage_engine=innodb
# memory pool InnoDB uses to store data dictionary information and other internal data structures (default:1M)
# Deprecated in MySQL >= 5.6.3
innodb_additional_mem_pool_size=1M
# memory buffer InnoDB uses to cache data and indexes of its tables (default:128M)
# Larger values means less I/O
innodb_buffer_pool_size=80M
# Create a .ibd file for each table (default:0)
innodb_file_per_table=1
# Write out the log buffer to the log file at each commit (default:1)
innodb_flush_log_at_trx_commit=2
# Buffer size used to write to the log files on disk (default:1M for builtin, 8M for plugin)
# larger values means less I/O
innodb_log_buffer_size=1M
# Size of each log file in a log group (default:5M) larger means less I/O but more time for recovery.
innodb_log_file_size=64M
# # error log file name, relative to datadir (default:hostname.err)
log_error=mysql.err
# print warnings and connection errors (default:1)
log_warnings=2
# Convert table named to lowercase
lower_case_table_names=1
# Maximum size of one packet or any generated/intermediate string. (default:1M)
max_allowed_packet=32M
# Maximum simultaneous connections allowed (default:100)
max_connections=256
# The two options below make no sense with prepared statements and/or transactions
# (make sense when having the same query multiple times)
# Memory allocated for caching query results (default:0 (disabled))
query_cache_size=0
# Do not cache results (default:1)
query_cache_type=0
# Do not use the privileges mechanisms
skip_grant_tables
# Do not listen for TCP/IP connections at all
skip_networking
# The number of open tables for all threads. (default:64)
table_open_cache=200
# How many threads the server should cache for reuse (default:0)
thread_cache_size=3
# wait 365d before dropping the DB connection (default:8h)
wait_timeout=31536000
# We use InnoDB, so don't let MyISAM eat up memory
key_buffer_size=16K
[client]
default-character-set=utf8
Test 7: SUCCESS
MySQL server custom configuration found.
Details: The custom configuration for the MySQL server was found and is readable at <a href='/home/the_user/.config/akonadi/mysql-local.conf'>/home/the_user/.config/akonadi/mysql-local.conf</a>
File content of '/home/the_user/.config/akonadi/mysql-local.conf':
# workaround fix for akonadi db error after server upgrade
# http://forum.kde.org/viewtopic.php?f=215&t=101004
[mysqld]
binlog_format=row
Test 8: SUCCESS
MySQL server configuration is usable.
Details: The MySQL server configuration was found at <a href='/home/the_user/.local/share/akonadi/mysql.conf'>/home/the_user/.local/share/akonadi/mysql.conf</a> and is readable.
File content of '/home/the_user/.local/share/akonadi/mysql.conf':
# Global Akonadi MySQL server settings,
# These settings can be adjusted using $HOME/.config/akonadi/mysql-local.conf
# Based on advice by Kris Köhntopp <[email protected]>
[mysqld]
# strict query parsing/interpretation
# TODO: make Akonadi work with those settings enabled
# sql_mode=strict_trans_tables,strict_all_tables,strict_error_for_division_by_zero,no_auto_create_user,no_auto_value_on_zero,no_engine_substitution,no_zero_date,no_zero_in_date,only_full_group_by,pipes_as_concat
# sql_mode=strict_trans_tables
# DEBUGGING:
# log all queries, useful for debugging but generates an enormous amount of data
# log=mysql.full
# log queries slower than n seconds, log file name relative to datadir (for debugging only)
# log_slow_queries=mysql.slow
# long_query_time=1
# log queries not using indices, debug only, disable for production use
# log_queries_not_using_indexes=1
# mesure database size and adjust innodb_buffer_pool_size
# SELECT sum(data_length) as bla, sum(index_length) as blub FROM information_schema.tables WHERE table_schema not in ("mysql", "information_schema");
# NOTES:
# Keep Innob_log_waits and keep Innodb_buffer_pool_wait_free small (see show global status like "inno%", show global variables)
#expire_logs_days=3
#sync_bin_log=0
# Use UTF-8 encoding for tables
character_set_server=utf8
collation_server=utf8_general_ci
# use InnoDB for transactions and better crash recovery
default_storage_engine=innodb
# memory pool InnoDB uses to store data dictionary information and other internal data structures (default:1M)
# Deprecated in MySQL >= 5.6.3
innodb_additional_mem_pool_size=1M
# memory buffer InnoDB uses to cache data and indexes of its tables (default:128M)
# Larger values means less I/O
innodb_buffer_pool_size=80M
# Create a .ibd file for each table (default:0)
innodb_file_per_table=1
# Write out the log buffer to the log file at each commit (default:1)
innodb_flush_log_at_trx_commit=2
# Buffer size used to write to the log files on disk (default:1M for builtin, 8M for plugin)
# larger values means less I/O
innodb_log_buffer_size=1M
# Size of each log file in a log group (default:5M) larger means less I/O but more time for recovery.
innodb_log_file_size=64M
# # error log file name, relative to datadir (default:hostname.err)
log_error=mysql.err
# print warnings and connection errors (default:1)
log_warnings=2
# Convert table named to lowercase
lower_case_table_names=1
# Maximum size of one packet or any generated/intermediate string. (default:1M)
max_allowed_packet=32M
# Maximum simultaneous connections allowed (default:100)
max_connections=256
# The two options below make no sense with prepared statements and/or transactions
# (make sense when having the same query multiple times)
# Memory allocated for caching query results (default:0 (disabled))
query_cache_size=0
# Do not cache results (default:1)
query_cache_type=0
# Do not use the privileges mechanisms
skip_grant_tables
# Do not listen for TCP/IP connections at all
skip_networking
# The number of open tables for all threads. (default:64)
table_open_cache=200
# How many threads the server should cache for reuse (default:0)
thread_cache_size=3
# wait 365d before dropping the DB connection (default:8h)
wait_timeout=31536000
# We use InnoDB, so don't let MyISAM eat up memory
key_buffer_size=16K
[client]
default-character-set=utf8
# workaround fix for akonadi db error after server upgrade
# http://forum.kde.org/viewtopic.php?f=215&t=101004
[mysqld]
binlog_format=row
Test 9: SUCCESS
akonadictl found and usable
Details: The program '/usr/bin/akonadictl' to control the Akonadi server was found and could be executed successfully.
Result:
Akonadi 1.13.0
Test 10: SUCCESS
Akonadi control process registered at D-Bus.
Details: The Akonadi control process is registered at D-Bus which typically indicates it is operational.
Test 11: SUCCESS
Akonadi server process registered at D-Bus.
Details: The Akonadi server process is registered at D-Bus which typically indicates it is operational.
Test 12: SKIP
Protocol version check not possible.
Details: Without a connection to the server it is not possible to check if the protocol version meets the requirements.
Test 13: SUCCESS
Resource agents found.
Details: At least one resource agent has been found.
Directory listing of '/usr/share/akonadi/agents':
akonadibalooindexingagent.desktop
akonadinepomukfeederagent.desktop
akonotesresource.desktop
archivemailagent.desktop
birthdaysresource.desktop
contactsresource.desktop
davgroupwareresource.desktop
facebookresource.desktop
followupreminder.desktop
googlecalendarresource.desktop
googlecontactsresource.desktop
icaldirresource.desktop
icalresource.desktop
imapresource.desktop
invitationsagent.desktop
kabcresource.desktop
kalarmdirresource.desktop
kalarmresource.desktop
kcalresource.desktop
kdeaccountsresource.desktop
knutresource.desktop
kolabproxyresource.desktop
kolabresource.desktop
localbookmarksresource.desktop
maildirresource.desktop
maildispatcheragent.desktop
mailfilteragent.desktop
mboxresource.desktop
migrationagent.desktop
mixedmaildirresource.desktop
mtdummyresource.desktop
newmailnotifieragent.desktop
nntpresource.desktop
notesresource.desktop
openxchangeresource.desktop
pop3resource.desktop
sendlateragent.desktop
vcarddirresource.desktop
vcardresource.desktop
Environment variable XDG_DATA_DIRS is set to '/usr/share:/usr/share:/usr/local/share'
Test 14: ERROR
Current Akonadi server error log found.
Details: The Akonadi server reported errors during its current startup. The log can be found in <a href='/home/the_user/.local/share/akonadi/akonadiserver.error'>/home/the_user/.local/share/akonadi/akonadiserver.error</a>.
File content of '/home/the_user/.local/share/akonadi/akonadiserver.error':
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
Test 15: ERROR
Previous Akonadi server error log found.
Details: The Akonadi server reported errors during its previous startup. The log can be found in <a href='/home/the_user/.local/share/akonadi/akonadiserver.error.old'>/home/the_user/.local/share/akonadi/akonadiserver.error.old</a>.
File content of '/home/the_user/.local/share/akonadi/akonadiserver.error.old':
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
Control process died, committing suicide!
Test 16: ERROR
Current Akonadi control error log found.
Details: The Akonadi control process reported errors during its current startup. The log can be found in <a href='/home/the_user/.local/share/akonadi/akonadi_control.error'>/home/the_user/.local/share/akonadi/akonadi_control.error</a>.
File content of '/home/the_user/.local/share/akonadi/akonadi_control.error':
Executable "akonadi_nepomuk_feeder" for agent "akonadi_nepomuk_feeder" could not be found!
Test 17: ERROR
Previous Akonadi control error log found.
Details: The Akonadi control process reported errors during its previous startup. The log can be found in <a href='/home/the_user/.local/share/akonadi/akonadi_control.error.old'>/home/the_user/.local/share/akonadi/akonadi_control.error.old</a>.
File content of '/home/the_user/.local/share/akonadi/akonadi_control.error.old':
Executable "akonadi_nepomuk_feeder" for agent "akonadi_nepomuk_feeder" could not be found!After Upload you can delete the Duplicates comparing the employee Id.
It Will be Possible only when you use OLE and read the file records line by Line. I am not sure of the error Handling with OLE control. It may lead to some performance issues.. -
Best way to debug KDE process crashes
I've got a relatively fresh install of ARCH with KDE running. However every time I reboot and log in I immediately get 2 pop-ups stating that KMix and a KDE Deamon closed unexpectedly. The "executable" for both is listed as kdenitit4. I'm assuming that is the app that started the failed process? Checking the PIDs for each in the process list before closing the pop-ups show kmix and kded4 as the actual stopped processes.
Question then, what is the best way to debug this. I know there are system logs but I'm really not that familiar with where or what to look for and really want to learn and also fix the crashes :-) What is the best way to start. Thanks,
John.........Here is some of the lines around the 2 KCrash errors:
Known subscriber "AkonadiAgentServer" subscribes again
void Akonadi::NotificationSource::addClientServiceName(const QString&) Notification source "AkonadiAgentServer" now serving: (":1.48", ":1.47")
Known subscriber "AkonadiAgentServer" subscribes again
void Akonadi::NotificationSource::addClientServiceName(const QString&) Notification source "AkonadiAgentServer" now serving: (":1.48", ":1.47", ":1.49")
Database "akonadi" opened using driver "QMYSQL"
Database "akonadi" opened using driver "QMYSQL"
Known subscriber "AkonadiAgentServer" subscribes again
void Akonadi::NotificationSource::addClientServiceName(const QString&) Notification source "AkonadiAgentServer" now serving: (":1.48", ":1.47", ":1.49", ":1.46")
plasma-desktop(889)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
>> KCrash: Attempting to start /usr/bin/kded4 from kdeinit
knotify(887)/phonon (KDE plugin): QDBusError("org.freedesktop.DBus.Error.NoReply", "Message did not receive a reply (timeout by message bus)")
korgac(944)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "The name org.kde.kded was not provided by any .service files"
knotify(887)/phonon (KDE plugin): QDBusError("org.freedesktop.DBus.Error.ServiceUnknown", "The name org.kde.kded was not provided by any .service files")
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
kdeinit4: hcontrol.c:764: snd_hctl_handle_event: Assertion `elem' failed.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
>> KCrash: Application 'kded4' crashing...
KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi from kdeinit
[0x2853108] main input error: ES_OUT_RESET_PCR called
KCrash: Application 'kmix' crashing...
KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi from kdeinit
Known subscriber "akonadi_maildispatcher_agent" subscribes again
Known subscriber "akonadi_maildispatcher_agent" subscribes again
Agent instance created in separate process.
I marked the original two KCrash's with >> to make them easier to find. Looking a few lines down from the 2nd one I also see a KCrash for 'kmix' which is also part of the problem. Don't really see anything else interesting. Open to ideas. Thanks,
John........... -
Business rule in MDS 2012 error: A database error has occurred. Contact your system administrator.
I get the following information in my MDS log as well as the above error message when I execute a business rule that has a condition of AND and an Action of Attribute must be unique in combination with 2 other attributes.
I'm running SQL Server 2012 11.0.3000
MDS database version 11.1.0.0
Any ideas?
MDS Error: 0 : SqlException message: A database error has occurred. Contact your system administrator.
at Microsoft.MasterDataServices.Core.DataAccess.DbHelper.HandleExceptions(Exception ex)
at Microsoft.MasterDataServices.Core.DataAccess.DbHelper.ExecuteDataSet(String spName, CloseConnectionBehavior closeBehavior, Object[] parameterValues)
at Microsoft.MasterDataServices.Core.DataAccess.MasterDataAccess.<>c__DisplayClass5.<ValidateEntityMembers>b__4()
at Microsoft.MasterDataServices.Core.DataAccess.DbHelper.ExecuteMethodWithDeadlockProtection(MethodDelegate method)
at Microsoft.MasterDataServices.Core.BusinessLogic.Validations.ValidateMembers(Int32 versionId, Identifier entityIdentifier, IList`1 memberIds, RequestContext context, OperationResult results)
at Microsoft.MasterDataServices.Core.BusinessLogic.Validations.Process(ValidationProcessCriteria criteria, Boolean commitVersion, Boolean validateEntityAsync, Boolean returnValidationResults, RequestContext context, OperationResult results)
SQL Error Debug Info: Number: 208, Message: Invalid object name 'cteDuplicates0a070e37b106b9e3efe35a455076efa7'., Server: SQLRS-01, Proc: udp_SYSTEM_3_38_CHILDATTRIBUTES_ProcessRules, Line: 230
SQL Error Debug Info: Number: 266, Message: Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 0, current count = 1., Server: SQLRS-01, Proc: udp_SYSTEM_3_38_CHILDATTRIBUTES_ProcessRules, Line: 230
SQL Error Debug Info: Number: 266, Message: Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 0, current count = 1., Server: SQLRS-01, Proc: , Line: 0
SQL Error Debug Info: Number: 266, Message: Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 0, current count = 1., Server: SQLRS-01, Proc: udpBusinessRule_AttributeMemberController, Line: 0
SQL Error Debug Info: Number: 266, Message: Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 0, current count = 1., Server: SQLRS-01, Proc: udpValidateMembers, Line: 0
DateTime=2013-08-15T13:25:15.6684023Z
MDS Error: 0 : <ArrayOfError xmlns="http://schemas.microsoft.com/sqlserver/masterdataservices/2009/09" xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<Error>
<Code>208</Code>
<Context i:nil="true" />
<Description>A database error has occurred. Contact your system administrator.</Description>
</Error>
</ArrayOfError>
DateTime=2013-08-15T13:25:15.7152026ZOK I bit the bullet and contacted support on this one.
There is a known issue with MDS 2012 and business rules with a combination of "must be unique" attributes. If you do not list the attributes in the same order that they were created you will get the generic error I cited. At first they told me it must be
in the same order the attributes are in and that worked on one entity but not the other. The difference was that in the second entity I previously rearranged the attributes in question. Once I changed the order in the business rule to reflect the *original*
order it worked like a champ.
Hopefully this helps save someone some time and money. -
Database error when creating a new ADDM
Hi Guys,
In my dbconsole 10.1.0.4 i got this error when trying to create a snapshot:
Database Error
Task TASK_38223 has been created, but following error occurs during the execution time : ORA-13707: Either the start snapshot 19110 or the end snapshot 19111 is incomplete or missing
key statistics. ORA-06512: at "SYS.PRVT_ADVISOR", line 1283 ORA-06512: at "SYS.DBMS_ADVISOR",
line 190 ORA-06512: at line 1
everything else is OK.
Please advise,
Regards,
FirasHi,
I checked the trace files in BDUMP and found this:
Oracle process number: 13
Unix process pid: 21443, image: oracle@xxxxx (m000)
*** ACTION NAME:(Auto-Flush Slave Action) 2008-04-15 12:00:22.103
*** MODULE NAME:(MMON_SLAVE) 2008-04-15 12:00:22.103
*** SERVICE NAME:(SYS$BACKGROUND) 2008-04-15 12:00:22.103
*** SESSION ID:(156.413) 2008-04-15 12:00:22.103
*** KEWROCISTMTEXEC - encountered error:
( ORA-00001: unique constraint (SYS.WRH$_SQLTEXT_PK) violated )
*** SQLSTR: total-len=632, dump-len=240,
STR={INSERT INTO wrh$_sqltext (sql_id, dbid, sql_text, command_type, snap_id, ref_count) SELECT /*+ ord
ered use_nl(s1) index(s1) */ sie.sqlid_kewrsie, :dbid, s1.sql_fulltext, }
*** KEWRAFM1: Error=13509 encountered by kewrfteh
Please advise,
Cheers,
Firas -
"Severe database error" makes it impossible to sign into Story desktop application. How can I fix?
When I open the Adobe Story desktop application and sign in, I immediately receive the following message:
"ERROR:
Sorry, your Story Free subscription does not allow access to the application in online mode. You can work in the offline mode to retrieve your files."
I want to work in offline mode, so I click "Work Offline."
Immediately after I click this, I got another error message:
"OFFLINE DATABASE ERROR - ADOBE STORY
Adobe Story has encountered a severe database error and will not be able to retrieve some of your data from your last session. You can recover rest [sic] of your data by either restoring your account to the last backup date or by synchronizing it with your online account."
I'm then given two options:
Restore to the last backup date [GRAYED OUT, because I never backed up]
Sync with my online account( Sign in required )
I choose the only option I can, then click "Continue."
This immediately cycles me back to the opening screen, "Your next great story starts here," with the options "Learn more" or "Sign in."
Every time I click "Sign in," Adobe Story repeats all the steps listed above, making it impossible for me to actually use the program, UNLESS of course I upgrade to Adobe Story Plus, which I don't intend to do.
Is there any way my account can be fixed to allow me to use the Story desktop application without all these error messages? (I've tried uninstalling and reinstalling already.)
I just started using Story, so I have no earlier projects to retrieve. Story can wipe my account clean if necessary, it doesn't matter.
However, I've run into so many problems just trying to *start* using Story that I'm really worried about this program's reliability, especially for the middle of a production. Hopefully after further testing I won't run into so many problems.Hi,
try this
open item Ifile -
Database error for ADDR_PERS_COMP_COMM_GET 0
Dear All,
In my organization end user is getting error Database error for <ADDR_PERS_COMP_COMM_GET> <0> while trying to fetch a report through background.
Pls help , it's very urgent
Thanx in advance
AbhishekHi Abhishek,
Try to debug this batch job and see what is the problem.
Put a break point in ur program.In Sm37 select already executed/cancelled batch job. Type jdbg in command prompt and press enter control will go to the program. Now debug and see what is happening.
Most probably it is some thing that needs to be corrected by BASIS peopple. So get in touch with them also.
Hope it will be helpful.
Thanks,
Vinod.
Edited by: Vinod Reddy Vemuru on Jul 5, 2008 12:58 PM -
Issue with trigger, multi-table insert and error logging
I find that if I try to perform a multi-table insert with error logging on a table that has a trigger, then some constraint violations result in an exception being raised as well as logged:
<pre>
SQL> select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for 32-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL> create table t1 (id integer primary key);
Table created.
SQL> create table t2 (id integer primary key, t1_id integer,
2 constraint t2_t1_fk foreign key (t1_id) references t1);
Table created.
SQL> exec dbms_errlog.create_error_log ('T2');
PL/SQL procedure successfully completed.
SQL> insert all
2 into t2 (id, t1_id)
3 values (x, y)
4 log errors into err$_t2 reject limit unlimited
5 select 1 x, 2 y from dual;
0 rows created.
SQL> create or replace trigger t2_trg
2 before insert or update on t2
3 for each row
4 begin
5 null;
6 end;
7 /
Trigger created.
SQL> insert all
2 into t2 (id, t1_id)
3 values (x, y)
4 log errors into err$_t2 reject limit unlimited
5 select 1 x, 2 y from dual;
insert all
ERROR at line 1:
ORA-02291: integrity constraint (EOR.T2_T1_FK) violated - parent key not found
</code>
This doesn't appear to be a documented restriction. Does anyone know if it is a bug?Tony Andrews wrote:
This doesn't appear to be a documented restriction. Does anyone know if it is a bug?Check The Execution Model for Triggers and Integrity Constraint Checking.
SY. -
Database error number 17003 has occured
we are using oracle 9.2.0.1.0 database . on top of that we are usinm maximo 5.1 application .
but when we try to do insert or select action we will get this error.
database error number 17003 has occure.please contact your system administrator for administrator.Invalid column index
i saw alert log file of the database, but as per aletr log file there is no error.
please suggets me . thanks a lot in advance.
BEST REAGRDSYou can find lots more example like http://www.dbmotive.com/oracle_error_codes.php?errcode=17003 using Google. Nothing worked or you haven't tried ?
-
Zen 11.2.1 on Window s2008 R2 and SQL 2008 R2 database.
When trying to run a predefined report I receive the following error:
A database error occurred. The databse erro text is: This driver is not configured for integrated authentication.
Can anyone help me with this?mschmahl,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/ -
Hi,
I'm having some problems with ZENworks Mobile Management 3.0 which I can't figure out.
Some info:
MS Server 2008 R2
SQL Server 2008 SP1
All updates installed
I have a functional LDAP connection to our AD.
When I'm registering new devices through the ZENworks application on iOS-devices everything works like a charm and the APN profile is installed without any problems.
So far so good, I can now make changes to our default policy and the changes are applied to the device.
Now to the juicy part, when I create iOS Corporate Resources and choose to deploy to an LDAP group (which I'm a member of) I can see in the dashboard that the resource is delivered to my user and device.
But the resource is never deployed to the physical device. Then I looked in the logs on the device and found these two errors in the iOS MDM Sync Log:
Error
CIOSMDMCommandBase::CheckStatus
Device returned ERROR status
Database Error
ExecuteSQL
Failed running query:
DELETE FROM CommandsByDevice WHERE DeviceSAKey = ? AND UUID = ?
SQLError:
ExecuteSQL returned status: -1
State: 23000
Native: 547
Error: [Microsoft][ODBC SQL Server Driver][SQL Server]The DELETE statement conflicted with the REFERENCE constraint ""FK_Profile_For_Removal"".
The conflict occurred in database ""MDM"", table ""dbo.iOSProfilesForRemoval"", column 'CommandsByDeviceSAKey'
When I get this error the device stops talking to the MDM and no changes are applied to it. I have tried on different devices and with other LDAP-accounts but same error is presenting itself.
The only way to get rid of this is by resetting the device for enrollment, then everything works until I assign a iOS Corporate Resource.
I can assign a iOS Corporate Resource directly to the user and that works just fine.
Ideas?
Thanks,
RasmusI am not seeing exactly the same thing as what you are describing. I have had issues with deploying Apps, including Managed Apps. I do notice that several of the teachers that I support recently updated to iOS 8 which caused some working profiles to fail. Once I removed and reloaded the configuration I noticed that the profiles only had the single MDM listed. Everything acted like it was working so I haven't looked at it further. I don't personally have iOS 7 devices so can't check tonight but will look to see if any of my other iPads I support show only a single profile setup. My iOS 8 iPhone (4s) only has the single profile with listed items under that profile so I am guessing that is how Apple is now handling things.
Richard
Maybe you are looking for
-
Movie not on apple tv list, but is playable by apple remote (iphone)
Sorry about the crazy title, I don't know how to say this succinctly. I have just gotten a new apple tv and have synced several movies to it, but still have my entire library on my mac pro streaming to it. There are a couple of movies that show up on
-
ok when I try to download them and click buy now is says the network is not working and connecting to the itunes store what do I do so I can download them?
-
Tried with 11 and 10 it opens for 2 seconds then closes itself, cant read or even open any menu option to make a change to security etc, have tried removiing and downloading again many times but still the same issues, this is on Windows 7 using the
-
ID CC 2014 - interactive pdf - video full screen?
I just finished an interactive pdf with some videos inside. The videos work fine except I need them to open in full screen and cannot find any process to do this. Any help? thx RD
-
Making an Acrobat "PDF" file 'hotbuttons' appear '"HOT"
How do make Acrobat "PDF" file text 'hotbuttons' appear HOT immediately upon someone opening they file so there is no missing them as links, and the viewer knows immediately that they are 'clickable'.....and that they are obvious links...(I know, I