Way to eliminate a line distortion in video (CS5)

I have a thin line, presumably caused by an additional lens. I remember there's a way to eliminate unwanted objects in Photoshop but is there something similar in Premiere

if you are talking about the fuzzy vertical line that's
in the right side of the frame, you have a problem...
there is no easy way to remove it
your only options might be to zoom in until it is out of frame
and as a result, sacrifice camera framing and image quality
or
you can spend hours of rotoscoping time in after effects,
and the result will be less than perfect
or
you can experiment with covering it with something creative
like a graphic element, or something crude like a blur
hahahahahahahahahahaha!!!

Similar Messages

What is the best way to eliminate room hum in my video?

I have a room hum in my clips that I wish to eliminate.
I downloaded Audacity and it worked fine, right up to the point where I exported it to FCE. In Timeline the sound file was out of sync and nothing I have tried will synchronize it with the video. I understand that going through the Audacity cleansing has removed the FCE signals that would have normally produced the out-sync- buttons in the Timeline so that I could rectify the problem.
I posed this problem in a previous post and crowed that I had solved the problem. Turns out, I had not, so here I am, with my tail between my legs, looking for assistance.
1) Does anyone know of a way for me to export an audio clip from Audacity so that it is correctly reunited with its video in FCE?
2) Is there a way to move an audio track one frame at a time along the Timeline track so that I can try to align they clips by trial and error? (I know; this sounds very sloppy)
3) I have been reading with great interest the post by Tricial and her problems with Soundsoap. I was just about to give up on Audacity and then download Soundsoap trial software. Tricial feels, she states, that Soundsoap and FCE are not compatible. One respondent to her post sensibly suggested she contact Bias, the parent of Soundsoap, and ask if their product is compatible with FCE or not. An excellent suggestion. I went to the Bias site and found that in order to ask a question, you must provide a serial number! In other words, you must buy the product before you can ask if it works! I turned to their FAQ page, but this question is not addressed. The closest they come is to saying that Soundsoap works with Snow Leopard but for all I know, that may be only in iTunes or Garage Band.
I so messed up (not exactly the word I was thinking) my sound tracks that I have decided to start over and dump a couple of weeks work. Aargh.
I would appreciate your wisdom.

2) Is there a way to move an audio track one frame at a time along the Timeline >track so that I can try to align they clips by trial and error? (I know; this >sounds very sloppy)
Lock your video track, select the audio, type +01 then Enter.
A Move box will appear with the value 01 init, this means the audio will move forward one frame.
Type -01 to go backwards. Typing -02 is two frames etc.
Make sure there is nothing in the way or you will have a +Clip Collision+ warning.
Can't help with Audacity.
Al

CANON 5D MARK III TO FCP 7-WHY ARE THERE LINES IN MY VIDEO?

Hi there, so Ive just upgraded from the T2i to Canon 5D Mark III and this is the first time I'm importing footage to final cut. I have FCP 7 (Mac computer) and my video files are 1920x1080, h264 codec shot at 30 fps (29.97). Previously, when importing from the T2i, I used MPEG Streamclip to convert my video files to Apple Prores 422, and then import those compressed files into FCP 7, with field dominance being UPPER, pixels SQUARE. I never had an issue of quality loss or lines through my viewer and canvas using these settings. However, after attempting to do the same with my footage from the Mark III, I got lines through my footage. After researching a bit, I was convinced that the way to eliminate the problem was to download the 5DTORGB app for $50. This has not fixed my problem! Have tried multiple combinations of different field dominance settings and nothing is working. Is this an interlacing problem? I attempted to catch a screenshot but everytime I pause the video or take a shot, the lines do not show...I do not know what is going on! My original mov files are fine, it is only once I convert and import to final cut that they get these little lines... I am desperate for answers, please someone help!!!

You need to ask this on the Final Cut Studio forum.

Drawing a straight line over a video

Is it possible to draw a straight line over a video in CS6 and also to watch the video frame by frame to take exact timings?

Hi Jeff,
Back again! i have managed to put the line over the video and can have it on there as long or as short time as i wish, but it appears to be moving with the video and i need it to stay at a certain point and the video to carry on playing. Basically im trying to mark a point on a race track where the horse in the lead gets to, then i need the line to stay there for when the last horse comes to the line, with the lead horse moving on past. Currently the line doesnt stay on a specific point it on the video and go out of shot when the video moves, it appears to be moving with the video. I know the overlay is a static image but is there a way of making it look like it stays in a specific place on the video?
Hope this makes sense!
Thanks Kat

When I stream a movie via Apple TV from my iPad Air into my Samsung TV, I'm getting the "soap opera" effect. This only happens when I use Apple TV, not when I view a movie directly through a cable channel. Is there a way to eliminate this effect?

When I stream a movie via Apple TV from my iPad Air into my Samsung TV, I'm getting the "soap opera" effect. This only happens when I use Apple TV, not when I view a movie directly through a cable channel. Is there a way to eliminate this effect?

I'm having the same problem. It's not an issue with my TV, i've turned this feature off. I've tried playing with the ATV display settings but nothing works. When I stream netflix from my Samsung bluray player, I don't get the soap opera effect, but when I stream any video from the ATV, the soap opera effect is there. I'm thinking it's a choice that Apple made, but I really wish it could be turned off. Not a lot of people are searching for this, because it can be easy to overlook, but it's driving me nuts!

MBP (early 2008) Screen flicker and line distortions

Hi there,
My macbook pro has been running fine for the past 3 and a bit years, but yesterday this very strange issue started occuring.
At random times, the screen with start flickering quite quickly and then random line distortions appear on the screen. After a minute or 2, the screen freezes but I can move the mouse without being able to click on anything.
So then I have to press the power off button to shut down the computer. Once I turn it back on, there are lines and distortions all over the grey screen except on the Apple logo.
Next time it happens, I will try and save a photo of it.
In the console, this seems to be what happened. I must admit that none of this makes sense for me.
13/01/11 10:30:59 AM com.apple.launchd[1] * launchd[1] has started up. *
13/01/11 10:31:43 AM com.apple.WindowServer67 Thu Jan 13 10:31:43 jonathan-marskells-macbook-pro.local WindowServer67 <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
13/01/11 10:31:49 AM com.apple.launchd.peruser.50292 (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
13/01/11 10:31:58 AM com.apple.launchd.peruser.50292 (com.apple.Kerberos.renew.plist116) Exited with exit code: 1
13/01/11 10:32:18 AM GoogleSoftwareUpdateAgent119 LCC Scroll Enhancer loaded
13/01/11 10:32:20 AM 0x0-0x9009.com.Logitech.Control Center.Daemon122 objc122: Class comLogitechScrollEnhancerLoader is implemented in both /Library/InputManagers/LCC Scroll Enhancer Loader/LCC Scroll Enhancer Loader.bundle/Contents/MacOS/LCC Scroll Enhancer Loader and /Library/ScriptingAdditions/LCC Scroll Enhancer Loader.osax/Contents/MacOS/LCC Scroll Enhancer Loader. One of the two will be used. Which one is undefined.
I am running on 10.6.5.
Thanks for your help in advance.
Macbook Pro 15' 2.2Ghz 2gb RAM early 2008 Mac OS X (10.6.5)

From what I've read on different posts regarding video card issues and the early 2008 15" MBPs, or "affected models", Apple seems very selective at what they'll honor for repair. Hopefully my MBP will be repaired under this recall, but am not holding my breath.
My 15" MBP (early 2008 Penryn) has developed video card issues I suspect. It doesn't do the dark screen as others have which Apple is more likely to repair under the recall, but random batches of lined patterns show up on the display, it will blink sometimes, then it will totally lock up forcing a hard shut down with the power button.
I took it into a local Apple Authorized Service center, they ran the NVIDIA test on it which it passed, showing that the "known" defect wasn't the issue with my computers video card. Well something's screwed up with the video card most likely. They recommended taking it to the Genius bar at the Apple Store which I plan to do. It's less than 3 years old, Good grief!
I've been an avid Apple user for over 16 years, and have hardly ever run into hardware issues. Guess I've been lucky. But how Apple will handle my MBPs issues is unknown to me. Hopefully it will be positive, but am not holding my breath.
Art

I scanned an image and want to use the image trace tool, but it doesn't pick up all the lines. Is there a way to darken the lines before using the image trace tool?

I scanned an image and want to use the image trace tool, but it doesn't pick up all the lines. Is there a way to darken the lines before using the image trace tool? Help!

If the scan is in B&W, then play with the Threshold setting here
If it's in Color, then you will have to open the scan in a Raster editing software (like Photoshop) and play with the Brightness/Contrast settings to make the lines bolder.

Best way to remove last line-feed in text file

What is the best way to remove last line-feed in text file? (so that the last line of text is the last line, not a line-feed). The best I can come up with is: echo -n "$(cat file.txt)" > newfile.txt
(as echo -n will remove all trailing newline characters)

What is the best way to remove last line-feed in text file? (so that the last line of text is the last line, not a line-feed). The best I can come up with is: echo -n "$(cat file.txt)" > newfile.txt
(as echo -n will remove all trailing newline characters)
According to my experiments, you have removed all line terminators from the file, and replaced those between lines with a space.
That is to say, you have turned a multi-line file into one long line with no line terminator.
If that is what you want, and your files are not very big, then your echo statement might be all you need.
If you need to deal with larger files, you could try using the 'tr' command, and something like
tr '
' ' ' <file.txt >newfile.txt
The only problem with this is, it will most likely give you a trailing space, as the last newline is going to be converted to a space. If that is not acceptable, then something else will have to be arranged.
However, if you really want to maintain a multi-line file, but remove just the very last line terminator, that gets a bit more complicated. This might work for you:
perl -ne '
chomp;
print "
" if $n++ != 0;
print;
' file.txt >newfile.txt
You can use cat -e to see which lines have newlines, and you should see that the last line does not have a newline, but all the others still do.
I guess if you really did mean to remove all newline characters and replace them with a space, except for the last line, then a modification of the above perl script would do that:
perl -ne '
chomp;
print " " if $n++ != 0;
print;
' file.txt >newfile.txt
Am I even close to understanding what you are asking for?

Is there a way to create a thumbnail for QuickTime videos on a PC? All the videos currently have the same QuickTime logo as there thumbnail.

Is there a way to create a thumbnail for QuickTime videos on a PC? (Windows XP) All the the videos currently have the same QuickTime logo as their thumbnail.

Abdur,
In the sheet :: table :: cell that is going to receive the data, type an equals sign, then click on the cell that the data will come from and press Return.
This will require that you navigate to the origin cell by choosing the proper sheet.
Jerry

Is there a way to remove an imperfection from the video images?

I have a 2 minute clip. My subject is sitting in front of a poster. Is there a way to mask one line of text on the poster throughout the clip?

A third-party plugin would have done it, but alas, iMovie 08 does not support plug-ins.
There are several workarounds.
1. See if you can use an underscore character in a title
2. Zoom in and crop out the line from out of sight
3. Find someone with Final Cut to blur it out.
Since I cannot see a frame of the film, it is hard to see just what has to be blurred out.

Is there a way to speed up or slow down video clips in iMovie using the iPad?

Is there a way to speed up or slow down video clips using iMovie on the iPad? I do not have an Apple computer...just the iPad.

No.
There are other apps that can to time shifting, or speed effects.
iMovie cannot.

Is there a way to remove glasses glare in a video?

Is there a way to remove glasses glare in a video?

in post-production? No. (what is 'behind' the glare …?)
while recording? sure, there are products called 'dull spray'.

Is there a way to detect the end of a video?

Is there a way to detect the end of a video.. .mp4 or youtube? I want to be able to detect the end of a video and then have it do something...ie play on timeline or go to and play symbol.

For youtube the code would be something like this:
view-source:calkaweb.herobo.com/video.html
for HTML5 videos for youtube replace &version=3 with &html5=1 in the youtube URL
I have no idea how to impletent the youtube code into Edge tho other than an iframe but that wouldn't work I've tried :
http://forums.adobe.com/thread/1285212
You would need to place all of the youtube codes into edge in order for it to work but I duno how to do that and no1 answered the question in the thread I made about it.
as for MP4/HTML5 video you can use
var video = document.getElementsByTagName('video')[0];
video.onended = function(e) {
/*Do Something*/

If meta data LUN is totaly destroied , is there any way to rebuild the data from the video LUN

If meta data LUN is totaly destroied , is there any way to rebuild the data from the video LUN ????

What happened to your metadata? Are you sure the metadata is gone?
In theory, file carving could be attempted on the data LUNs, but you would need a tool that understands how Xsan lays out data across LUNs in a stripe group and hope your fragmentation isn't too bad. I doubt such a tool exists, but if one does it almost certainly is not publicly available. You should probably contact a data recovery service with experience recovering data from Xsan. Do that before you do anything else if this data is really important.

HT1349 what is the quickest way to move all my iTunes music, video, etc. to a new computer? any help would be appreciated. thanks. p.s. i purchased a belkin transfer cable - will that work?

hi - i'm a newbie - what is the quickest way to move all my iTunes music, video, etc. to a new computer? any help would be appreciated. thanks.
p.s. i purchased a belkin transfer cable - will that work? i have an iPod Touch.

You copy it from one computer to the other.
Type "move itunes library" into the google search bar.
You have posted in the iphone forum.

Way to eliminate a line distortion in video (CS5)

Similar Messages

Maybe you are looking for